TC with Optimum cable in brooklyn

Similar Questions

• should my time capsule be connected with a cable for backups, after the initial installation?

  should my time capsule be connected with a cable for backups, after the initial installation?

  If you mean that you have to keep your Mac connected to a Time Capsule via Ethernet for future backups, then the answer is no. Time Machine and time Capsule are designed to work over wireless for your Mac would just need to be connected to the wireless network provided by the time Capsule.

• Tecra A6 does not connect to internet with lan cable

  I got a new Tecra A6, (windows xp) which is barely a week. fine, except that when I connect my router to the laptop computer with lan cable broadband, I am not able to connect to the internet. When I connect the cable to the internet, I'm getting the lan icon works correctly, but when I open a browser page, it says no connection.

  considering that wireless works fine.

  help appreciated.

  Check the firewall settings.
  Maybe the firewall is on and does not allow you to open Web sites.
  Please also check the internet option-> connections in the

• What do I have to remove the battery from my PC when I connect it with the cable?

  So that the battery do not damaged.
  What do I have to remove the battery from my PC when I connect it with the cable?
  Tell me what I need to do for that battery not damaged

  Hi mate,
  Don t worry, just use your machine and leave your battery in your machine, because an electronic load look at your battery, so no damage will be caused.

  You know, technology is in fact at a good level and I think it s ok to operate your machine with cables and battery SET. :

  Greetings

• computer not automatically standby (formerly titled "impossible computer automatically sleep when it is connected to the internet with modem cable")

  Hi, I noticed recently that my computer (Windows XP Media Center Edition 2005) is unable to sleep automatically when it is connected to the internet with a cable modem. Change the settings for my current power mode and try a different feeding regime (diagrams of Windows XP default power and power management, I created) only solves the problem for 2 days at most. I also tried to change the settings for the other power plans mentioned, and yet once again, the problem was only set for two days at the most. I also tried turning off my computer, restarting my computer, recording Powercfg /Restore Default policies in Run, saving sfc/scannow in Run, and again, I got the same result. Reset and power cycling the modem cable is not helped either. To help you better understand the problem, for example, if I had the date set for the screensaver set to 1 minute, the time for the monitor to turn off set to 2 minutes and time for your computer set to 3 minutes, the screen saver activate after 1 minute, the monitor turns off after 2 minutes, but the computer would not sleep mode after 3 minutes , even after an hour or more. I tried to check the Task Manager, and I have not noticed any process that would be interrupting the day before. However, I noticed that when I turned on the monitor by moving the mouse, even when the computer was unable to sleep and unplugged the ethernet cable from the cable modem and waited, the computer has entered standby as it should have.  I tried to find a solution for more than a week, contributions for this issue would be greatly appreciated. Thank you for taking the time to read my post. (Update: it seems that the problem is something else then my cable modem.)

  Hello

  Thank you for the update.

  This behavior can occur because of possible conflicts of third-party software, which includes the third-party security software.

  You can also temporarily disable third-party security software and firewalls installed on the system and check the issue.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: be sure to enable the security software on the computer after checking the issue.

  Note: When you perform a clean boot, you can activate services for the modem, network card and disable third-party services to check the issue.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Where can I buy a usb key with thin cable for A500 for cell phone charger?

  Where can I buy a usb key with thin cable for A500 for cell phone charger? Or I can do?  Thanks for any help.

  The A500 uses 12VDC to load. USB use 5VDC. You could do a cable, but it wouldn't work because of differences in voltage. Sorry...

• Problem with the cable to the!

  Hello world

  I had a problem with my Xperia M4, if I insert the cable into the phone, the sound will not be expanded to the speakers, but since the phone. When I had a S3, this problem didn't happen, songs normally expanded by the speakers. Can someone help me :'(

  PS Si there are English errors in the text, don't worry, I'm not English

  Volendrug wrote:

  No, yet again, the problem persists. I tried to use another phone, cable is possibly damaged but with another work phone and with my xperia does...

  Maybe the cable that you are using. I have not yet test, but perhaps could be the problem:

  

  some "aux-in" accepts only stereo or mono or both, I'm not sure. try to use the original Sony first helmet. also compare it with your cable to the.

  on some cases, if the cable is mono, what I've done, it's not not to insert the plug completely. (see the second image) in this way, the right of the mono channel will sit properly on the right channel of the stereo-in.

• From high-speed wireless broadband with a cable modem, and shows the connection, but cannot access the web w / IE8

  I have Windows Vista, IE 8 and labtop HP Pavilion. I had just recently Cricket Wireless Broadband, with a USB wireless modem. I now have the Charter/Comcast broadband through my cable. The modem is connected to my PC via the Ethernet port. On the connection icon on the toolbar on the right down, it shows that I am connected. The "Local Area Connection Status" in the network and sharing Center seems to be connected, since bytes are sent and received.

  However, when I'm on IE8, it acts as if there is no connection. Not being able to view the web page. Also, now when I go to a local WiFi hotspot, I can't connect to a network, just as I always, and it shows that there is a link, however, it won't let me access the internet. It used to work, before everything first, I connected the cable modem.

  Any ideas? Thank you!!

  JFerguson15,

  If the Cricket connection works correctly but your cable connection is not, which suggests the computer is set up correctly and the problem is with the cable connection. All other systems are able to connect through the connection of the Charter? If this isn't the case, please contact Charter and see if they are able to determine the issue on their end or help you reconfigure the modem.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a sony ericsson phone with data cable but cannot import pictures on pc

  I have a sony ericsson phone with data cable but cannot import pictures on pc

  I have a sony ericsson phone with data cable but cannot import pictures on pc

  =====================================
  When you connect via a USB cable... go to... Start / computer...
  the phone should be listed as a drive letter. You should be
  able to access photos from there.

  Also... If the AutoPlay window isn't launchng when the phone
  is connected... perhaps the following will provide some ideas:

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to connect Dell latitude d600 to tv with vga cable to recognize TV

  When I go in the control panel and the external display connection layout juice has no opportunity to do so. It does not recognize my TV when well even the vga is plugged into the laptop a TV. the sum it please help. I tried the fn + f keys, and so on< and="">

  All I had to do was physically connect the PC to the TV with VGA cable then use

  Windows with P key

  for the TV as office extended & turn on the TV to display its VGA input.

  I then went to control panel, display, change the display settings.  In this page it Swing tour where she was [physically] in regards to the PC, I dragged the TV icon.

  I also saw that it offered different display settings for the TV but had to settle for the same thing that my PC screen using [which sounds logical, but I was tempted by the fact that she offered higher resolutions].

• I always use my laptop with the cable plugged in but the battery icon becomes sometimes red indicating that the load. Can you explain why?

  In a front of my laptop, there is a line of icons.  When I turn on my laptop, all icons become normally blue.  But sometimes, the battery icon turns rered indicate that my laptop recharges.  I always turn on my laptop with the cable is connected, the battery should not turn red, does?  Could you explain?

  Batteries "will always lose" part of their load.  It is quite normal that the laptop checks charge battery and "on upward.

• Connect two VSphere ESXi 5.0 with crossover cable

  Hi all! A newbie in the ESXi 5.0

  I configured both servers of VSphere ESXi 5.0 with two network adapters on each server, the first NETWORK card acts as a virtual Internet switch, and the other NETWORK adapter serves only the link of communication (Heartbeat) between two VSphere Esxi 5.0 using crossover cable.

  My question is, how can I create such change in VSphere in a problem of communication between these 2 servers with a crossover cable? I would like to connect my (CentOS 6) VMs on each server via this network adapter with cable modem Simulator for the purposes of the communication of pulsation. I know how to create a normal vSwitch who can communicate with the Internet, but I have no idea how to create a switch for the NICs connected with a crossover cable.

  Please drop me a line if you know how.

  P.S. The idea to use the crossover cable rather than use the simple ethernet cable is the cable eliminates the overhead and to avoid the lack of packages due to the processing time of the switch.

  I know not how to create one with ordinary vSwitch to establish a connection with the Internet, but not this vSwitch with crossover cable.

  There is no difference. Build a vSwitch as your normally would, including the NETWORK card that is connected via a crossover as your uplink cable.

• Why is Windows 7 on laptop not allowing streaming Optimum (cable service to laptop via app streaming.) Application

  My local cable company (Optimum) has released an application that simply creates an interface by which I can control all the features of my home DVR from any laptop to the wireless network.  I t also allows to broadcast live from any channel, as if you were watching on television.  When I run the application, it says the following message "alert Live streaming for HDXYZ (i.e.:HDCBS): this channel is currently unavailable on this device."

  They can't help and I think that there is something that I encouraged not to do Windows or a licence, but I'm lost.  If anyone can help I would really appreciate it.

  Hello

  If it works well before?

  I suggest you to uninstall and reinstall the Optimum application and check if the problem occurs. Follow these steps:

  Step 1:

  Uninstall the program software and features, follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step 2:

  After above step, install the Optimum application and check if the problem occurs.

  For any consultation you have a look at the link:

  http://Windows.Microsoft.com/en-us/Windows7/getting-started-with-media-streaming

  If you have problems with a specific application, you can contact support for assistance.

• To connect to a Windows PC with a cable crossover

  I want to transfer a lot of old files from a Windows Vista-based computer to my MacPro with a crossover cable. Does anyone know how to configure both units to achieve this?

  Just to be clear, you know that the Mac cannot read Windows files?

• Can I use an iMac as a PC monitor with a cable Thunderbolt?

  I have a Lenovo Thinkpad laptop computer with a bolt of lightning display port, I would be able to connect to a new iMac or iMac with the 5K retina via a cable Thunderbolt and target Display Mode to use it as a monitor? Thanks for the help!

  Sorry to be the bearer of bad news, the answer is no. Please read use your iMac as a display with the target - Apple Support Display Mode Apple is very specific to computers that will work. There is a solution available, but it is based on a connection Wi - Fi and performance is poor, not useful to examine same IMHO.