TC01 Timing

Hello

I'm reading temp of a tc01 and other devices for faster registration. I use the instance of Chan 1 Samp 1 DBL analog 1 d in VI Read DAQmx with the time set to 0 in the same loop, I have my most quick reading screws I was hoping to get an error when you request faster than 4 s/s data so it wouldn't bog down the rest of my program but DAQmx Read VI is just waiting for the upcoming samples at least 4 s/s. What I must put the DAQmx reading VI in a separate loop?

Thank you

Denis

Hi Denis,.

Yes.

Tags: NI Software

Similar Questions

  • I get Connection Timed Out

    Recently, I've been doing the Connection Timed Out on some sites. I have cleared my cache and cookies, and it still happens. I tried in safe mode and it still happens. I don't know what else to do besides just uninstall and reinstall firefox, and I don't know if this will even help.

    Now, here's the real kicker. The warning is not always to her for the same sites, and sometimes almost randomly. For a long time that it didn't happen and now it seems to start up again.

    So I have really no idea what to do. Can someone help me please. Also, I'm a bit of a novice when it comes to the computer speak, so if you have a question that may be a bit overwhelming, could you dumb it down a little for me.

    To be honest, I think I understood the connection problem. However, the connection was reset problem seems to happen after I visit Deviantart. No other site does seem to cause the problem. Is that what I can do to avoid this problem, when I visit this site?

  • Why the timing information not disappear when I switch off sync in my office?

    I'm at the office, in my work and I disconnect from my account synchronization to work and I want to connect to my personal account, but I can't because the timing with the first account information have not gone and wil be merged with personal information.

    Sync is not intended to be used in this way. Data that is synchronized is not a temporary view, the data is copied in Firefox on the device: the data do not disappear when you disconnect fron one account synchronization or close Firefox.

    You have to work and personal accounts of Sync thru having two distinct profiles.
    https://support.Mozilla.org/en-us/KB/profiles-where-Firefox-stores-user-data
    https://support.Mozilla.org/en-us/KB/Profile-Manager-create-and-remove-Firefox-profiles

    If you are interested in two distinct profiles, let know us and we can guide you when you set up desktop shortcuts for each profile opening.

  • Can not verify the account to download the free app Always get "Session Timed Out" message.

    Can not verify the account to download for free enter or just about always "Session Timed Out" message.

    Please describe in more detail what you are doing, and when it fails.

    Do you use any type of VPN or RAM to access resources outside of your region?

    Are you connected to WiFi when you do?

  • Connection timed out on the Web site. Tried to delete the cache/cookies. No proxy. Internet Explorer. Unable to access. Help, please. Site Web works.

    I get Connection Timed Out on these Web sites: energy-medicine - software.com and energy - medicine.info. I tried to clear cookies and cache. I put no Proxy. I tried Internet Explorer and are still unable to access. I restarted my computer. I know that this site is active, because I contacted the webmaster and he says that it is active to an end. What else can I do to access this site? Thank you!

    Make a check of malware with several malware scanning of programs on the Windows computer.
    Please scan with all programs, because each program detects a different malicious program.
    All of these programs have free versions.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

  • Simultaneous use of flex pitch and the "timing" on the same region?

    Is it possible to edit a region in 10 with the two flex pitch logic and timing? When I toggle between modes, I get a message that informs me that pitch adjustments will be suspended. If I put the pitch of the notes to something way off - to check it out - it seems that as soon as I switch to flex pitch in calendar mode, pitch adjustments are ignored. Is it possible to have both at the same time? Workaround is bounce calendar settings in place then the correct pitch. Is this the best way? The only way? Any information would be appreciated. Thank you. -John

    IF you use flexible hours first then flex pitch your flexible hourly landmarks remain intact. In pitch flex mode you can select to the end of a note and drag to the right or left and upwards or downwards. So you can bend the pitch and flexible at the same time, but only when there is an event of note.

  • Timed Access - won't save the changes of time

    I am using access delayed for several years.  It worked great until today.  When I try to change the time settings, it seems to work.  For example, I got our xbox set to turn off at 11:30.  I changed it at 23:31.  I hit 'Fact' several times until you are prompted to update.  It seemed to work - I even went back to check.  But then less than a minute later she came back both previous.  I use an AirPort Extreme and just updated to 7.7.7.  I also expanded the network by using an Airport Express, which has the same parameters of time on it.  I tried to time changes using AirPort Utility on my iPhone and on my Windows PC.

    Two options that have both worked for me:

    1) return to 7.7.3 firmware

    (2) keep installed 7.7.7 and delete all the access settings timed, updated to save installation and let AirPort Extreme will restart. Then enter the settings again.

    Can't tell if it will work for you, however.  Good luck if you want to try it. Keep the Express turned off until you have AirPort Extreme up and running properly. Then, turn on the Express.

  • Can't find the time capsule after changing access timed through iPhone app airport utility (setting: no access between 0130 to 0600). But I can not connect or find the same time capsule in the 0800.

    Cannot find or connect to time capsule after you change the timed access thro iPhone app

    You must have defined it incorrectly... factory reset and start again.

    Give us a screenshot of the settings before you apply them.

  • Podcast Connect Error: Read timed out

    Hi all

    I am quite new to podcasting and has just published my first episode. Now, I submitted the podcast to itunes and got the "approved podcast" - message from last night. So my podcast is listed on itunes now and works absolutly fine.

    But when I check on it to 'Podcasts Connect' I get an error message "connection to your feed was interrupted because of a connection timeout error. Read timed out ".

    For your understanding: I use a host externally (www.podhost.de), which should be implemented for all data in the RSS feeds from http://headlock.podspot.de/rss.

    When I downloaded the information, everything seemed to go well. Now I'm as stuck in the middle between labor and does not not :-)

    Is just a matter of time, because the cast has gotten only approved? Check the iTunes on the RSS feed on a regular basis and as a result, this error can be temporarily?

    Thanks for your help in advance, it is much appreciated!

    I was able to susbcribe and check it into Podcasts Connect and http://castfeedvalidator.com/ without problems. A time-out would be the cause of your server is slow to respond, but you can just hit a temporary problem that can be anywhere in the internet connection between Apple and your server. As long as it works in iTunes when you subscribe, I shouldn't worry about this. Temporary hiccup in internet connections is very common.

  • When I open the browser, I get a timed message and it finishes loading.

    When I click to open the browser, it takes a long time and then I get a timed message. I used 12 then charged down Aurora and the problem is still there. He moved more slowly to the a few weeks before and then just stop working and now it doesn't work at all.

    Follow the suggestions mentioned in the following articles:

    Check and tell if its working.

  • Enable/disable or change the "timing" on the backlit keyboard

    I love the backlit keyboard, which was a key factor for buying the P750.

    But is it possible to change the State of the backlit keyboard?

    I found that the economic mode turns off the light, but is it possible to turn it on continuously - or change the "timing"? In my opinion, that he died too soon.

    Please open Toshiba Assist > Optimize > HWSetup and you will find all the options related to the keyboard backlight.

  • I've recently upgraded to El Capitan - biggest problem is timing removed all the entries in my previous ical. Any ideas how I can track down the file containing these essential documents and install in the new program?

    I've recently upgraded to El Capitan - biggest problem is timing removed all the entries in my previous ical. Any ideas how I can track down the file containing these essential documents and install in the new program?

    All calendars are enabled in the sidebar?

  • "We could not complete your iTunes Store request. The network connection timed out. »

    Every hour or two iTunes for Mac displays a modal dialog box with the error 'we could not complete your iTunes Store request. The network connection timed out. "This interrupts any activity like playing airplay or order with the Remote App on iOS.

    I can identify no problems of networks. If I go to the iTunes Store deliberately I have no problem. I have no download waiting on the iTunes store. I try not to buy anything from the iTunes Store. I have no reason to connect to the iTunes Store.

    There is no update unapplied for iTunes. There is no update unapplied for Mac OS X. There is no update unapplied for my router. There is no network connection problem to any site I found.

    I can't find all the messages that allow me to debug this problem. The support page to If you can not connect to the iTunes Store - Apple supported provides no useful information.

    What this error message should tell me? What problem I actually feel?

    I noticed that sometimes.  I just quit iTunes and restart.  The problem reoccur not (until it is once again).  But for me, it's months between occurrences.

  • You can create profiles that are timed for the Defy?

    .. .for instance, if I want my Defy to be quiet during the night, but then come back to ring the morning after a period of time? I can find no way to create patterns like this one - timed or not. Any help gratefully received.

    Check out an app called 'Sweet Dreams'

    Mark

    Support Forums Manager

  • About theoretical Timing

    Hi all!

    I have a question about the calendar with the DAQmxbase functions. I have the task to save data with a sampling frequency static (it will be greater than 100 000 points per second in theory) and I need to display a writing data to the file in real time. So my idea was to put the sample clock to whatever the desired sampling frequency (lets say 100 000 at the moment) and I would have a loop of standard state machine (just a while loop with shift registers and a case statement inside) to collect data and write to the file then to decimate the data to display to the user. Each of these iterations, the amount of data read would be one-tenth of the sampling rate so I thought I could count just iterations until I arrived at the sampling frequency * 10, which would be the total number of hours. Unfortunately, after the execution of this program for a desired 20 minutes to 50,000 points per second, I noticed that the iterations had invariably longer over time, but it was so small that I didn't notice when I tried for 3 to 5 minutes. Is that what this has to do with the decimation of data slow down the program because we need to reallocate the array every time or it has to do with my way of thinking wrong in the way of our recordings of tension time?

    Information

    -LabVIEW 2014

    DAQmxbase - package used

    -System MAC OS X

    - NI USB-6211

    Needs

    -L' sample rate > 100 000 points per second

    -record for a specific amount of seconds by the user

    -written in the file and displays the user data

    Problems

    -While the iterations of the loop are run 0.1 of a second making the program more continue to record the tension longer than expected

    Please, if you do not understand or I forget important information please let me know!

    1 State Machine is NOT good architecture here.  You must keep this look DAQ run fast enough to track data in data acquisition.  Use rather a producer/consumer.  The idea here is that you have parallel loops that make the data recording and processing of data and let the DAQ loop to just read the data that it is.

    2. in windows calendar is not reliable.  Do not trust it.

    3 use the configure DAQmx Timing (assuming that there is no in the DAQmx Base) do DAQmx data stream into your PDM file.  It's one thing less worries and it is much more effective would you be able to do.

    4. If you follow my advice in (1), then you should read a certain number of points for each iteration of the loop.  Let's say 10kS.  Therefore, each iteration of the loop will be 100ms.  But for your decimation, you take all 10 samples.  There is a simple decimate 1 D table that you can use to make it easier on yourself.

Maybe you are looking for