TC7.0 blocks iframes for telepresence VC

Similar Questions

• Jabber for Telepresence blocked on "connect to..." »

  I had my computer company team check, fix my connection settings (I can ping the internal/SIP Server Server/external domain), but my connection always fails when you attempt to connect to the server.  Tried a different user account, but has the same problem and could not connect. I tried to stop my Windows Firewall service (7) and reinstall/repair of the Jabber for telepresence app, but it remains impossible to connect. Is there anything else I can try? The company VPN is not the issue, because other users can connect successfully from their PC. It seems that the problem is local to my PC, but it's just a new, default basic install Windows 7 x 64. Is there a install logs that I can check for more information on the failure of the connection? Any ideas?

  Thank you

  See attached pdf for how to make debugging (it says Win XP, but it is the same procedure for Win 7), it might give you a clue as to what's going on - however, if your connection attempt is actually hitting the server, then your COMPUTER team should be able to see this, and any associated error , the newspaper of the VCS.

  /Jens

  Please note the answers and score (s) questions such as "answered" as appropriate.

• How to block Facebook for specific users by IP in NSA 4600 Sonicwall

  Hello

  I want to block facebook and youtube for some users in network using the IP of the user's computer or a MAC and allow other remaining users access facebook normally in Dell Sonicwall NSA 4600.

  Kindly guide me how it is possible in the firewall settings. Thank you

  Osama Aftab.

  You must configure the App control rules advance for block & FB access to specific users.

  Following article will give you heads upward.

  It is said in this article during the configurations block: activate & user/group of users Include: all THE (IE block FB for all users). You can use groups to exclude the user to authorize access to few IPs/users.

  

• Jabber for telepresence (MAC OS)

  I was asked to rollouot the Jabber telepresence (MAC OS). I took all the Jabber for telepresence (Windows) However, I'm not familiar with the version of MAC OS.

  I looked for MAC OS user's guide, however it does not show where to enter the settings for the internal and external parameters.

  If someone has installed the version of MAC OS before and are there special models which must be addedd inot models in MSDS

  If you are looking to create a preconfigured installation program, see here:

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/Jabber_Video/4_6/CJAB_BK_C89F6C9E_00_cisco-Jabber-video-for-telepresence_chapter_011.html#CJAB_TK_CB861748_00

  The settings are in the relevant plist, look for com.cisco.JabberVideo.plist located in Library\Preferences.

  Parameters can also be added locally by the user; Open JabberVideo and click the key/screwdriver icon or choose JabberVideo then Preferences from the top Ribbon.

  Otherwise, there is no model of special supply required for the Mac, the two Win version and Mac use the same provisioning models.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• The current block size for a store of data in VMFS3 is 4 MB. Must upgrade thedatastore to VMFS5 and wants to change the block size of 1 MB

  The current block size for a store of data in VMFS3 is 4 MB. Must upgrade thedatastore to VMFS5 and wants to change the block size of 1 MB

  help me on this

  Create a new data store VMFS5 with a block size of 1 MB. Migrate all virtual machines store data to the new data store, and then delete the VMFS3 data store.

• Folder vs block IO for DTX200?

  We set up a new virtual using ESX 4.1 and e environment open for DTX200. What doe VMWARE recommends that -

  File i/o - without initializing it, IO file with initializaition, or block of e/s.

  Take a look at IO file or block of IO, Open-E support recommended to use the block IO for VMware because it's what they certified the V6 of DSS for iSCSI volumes, so they saw a better performance in it.

• "iframe" for a page ID in the same document (or other?)

  Hi, I have a technical paper work to do which will be likely to be used again and again, and I would like to simplify the manufacturing process of the new versions of it as they come.

  Basically, the final product is a sheet double-sided which when folded a particular one will see the 'face' (F1) and then folded new watch another "face" (F2) and folded a third time shows another "face" (F3). Because of the way work the folds only F1 is actually intact on the work of the sheet. F2 is divided in half right with each half on different parts of the leaf. F3 is divided four ways with quadrants in different regions and on the sides of the foil.

  My idea so far to keep the process manageable is to create a 5-page document - front and the back of the final page, and a page each for the three faces. I so want to place something that I can only describe as a series of iframes for each page of the form 1, 2 and 3 on the finals in the exact position as required. Then, in the future, I need only change the pages F1, 2 and 3, the changes and export now perfectly filled in new print PDF of the front and rear of the production of sheets for printing.

  The content tool Collector is close to what is needed isn't funny, but as far as I can tell it does that with the items you have already designated, and in this case I can not guarantee this text (example) new boxes, or more or less images or a background etc. may be necessary on the face in the future. I do not think I can add a new text box on page F1 and have an instance of it appear automatically on the form of production.

  An alternative, I thought is to simply make an .eps of each page of the form 1, 2 and 3, and keeping the same naming conventions, place those in the production journal. Update of the face page, export a new IP, update the file now-replaced and export PDF printing. This worked, but... is it possible to do it automatically?

  Create first of all in a separate INDD and place it on several places in the final document. If you edit it in this INDD all cases imported into the other INDD must only be refreshed.

• A question about synchronized waiting (block mode) for CPI in BB

  Hello

  I have such a scenario.

  Process a need to send a message to process B, in the send method, we need to wait until it receives the

  notification of process B that B has processed the message.

  All I know is that using ApplicationManager PostGlobalEvent() can send a message to B. But it is non-blocking mode.

  For example, after PostGlobalEent(), A must wait an appropriate event. There may be an another globalevent in A listener to listen on

  the notification.

  Thus in A, we will wait indefinitely until the listener has defined a status which a no need to wait any longer.

  I think that Infinity waiting consumes too much battery of BB.

  Is there a better method to avoid this problem constantly wait?

  In Windows Mobile, waitForSingleObject can easily deal with such a scenario. (blocking for the notification mode)

  I don't know if there is a similar way in BB.

  Any help?

  Sorry, I misread your original message and began to talk about the broader and more complicated case.

  You seem to want to send a message and it will hang until it is processed. You can do this as follows. You basically need a flag that can be set and queried in a thread-safe way, and it should also be possible to block until the indicator is defined without having an impact on the battery. The solution is simple. You need a flag (for example, a Boolean variable) and a monitor object. For example, you can put a Boolean field in the class of your message and use the message as a monitor instance. The beneficiary will be the message, treat it, acquire the monitor, set the flag and call notifyAll() on the monitor. The sender can thus post, acquire the monitor and loop until the flag is set, while citing wait() on the screen after each failure audit. This will have the effect of blocking the sender if the message has not yet been processed and that, until the message is processed. Waiting for a monitor is very cheap in what concerns the use of the battery, so don't worry about this.

  You can extend the simultaneous construction above to have a flag + result/exception and you get something similar to java.util.concurrent.Future of J2SE, I was talking about in my previous posts.

  P.S. If the processing of the message does not have a lot of time, I suggest that you consider the much simpler solution of using Application.invokeAndWait.

• Windows Mail blocks - suggestions for a fix?

  Hello
  Here's the situation. I have Windows Mail running on a desktop with Windows 7 as my operating system.  When my old computer crashed, I asked the technician to put Windows Mail instead of Windows Live mail on my new computer.

  Everything was fine until 2 days ago. Now, Windows Mail blocks whenever I'm doing one of the following things:

  -a click or even overview and email from different people sending a particular server
  -try to work in offline mode

  Everything works well with Windows Mail on my desk.  I don't think that the problem is the server that sends emails, because these emails do not cause a crash when I open with Windows Live Mail on my laptop.

  The server emails sent by is on my 'allowed senders' list in Windows Mail.

  Any ideas on what is the problem or how to fix it?

  The reason why I did not Live Mail on my new desktop computer is because I have more than 10 years of records organized of all the emails I received.  I was afraid to lose this info during the upgrade or passing.  I also find very confusing to use Windows Live Mail on my laptop.

  Another question... I could download Windows Live Mail on my desk and run in addition to Windows Mail, without losing everything that I have stored in Windows Mail?

  Thanks in advance for any help you can provide.
  Sue

  Not sure if it's too late, but I had the same problem and found a workaround.

  Specific messages were originally the crash - not everyone, only some. After some trial and error, I discovered the problem - by displaying the message in HTML format can cause a malfunction. I don't know what specific problem in the message causes the crash, but I found that switching to plain text resolved the problem.

  Switch to plain text turns off display HTML messages. You lose some formatting and images, but it does not crash, and that's what I found most critical. If you really want the screen, Windows Mail appears to include the HTML code as an attachment you want to open in another browser. I was able to do this successfully.

  Here's how to change plain text:

  1. in Windows Mail, select the Tools menu.
  2. Select the submenu Options. You will see a dialog box.
  3. Select the playback tab.
  4. check the option "read all messages in plain text.
  5. click on OK

  You should be good to go!

  I always intend on the study of other e-mail clients - Windows Mail is not supported for Windows 7 and I like either Live Mail. If all goes well, that you pass the problem while you other research programs.

  -Steve

• Video Jabber for TelePresence, VCS-E connection problem

  Hello

  I recently configured control VCS, VCS Expressway and TMS. Two VCS servers are software X7.2 and TMS is on 14.1.1 commissioning is configured between the VCS control and TMS, everything works OK internally and users can log in their Jabber client of telepresence video.

  When you try to connect via the highway-VCS I get the following question: "connection refused by the server. Try to connect again later"

  Area authentication is configured like this:

  VCS-Highway

  Sub-area by default: do not check the credentials

  Area Sefault: Do not check the credentials

  Crossing area: Do not check the credentials

  VCS-control

  Default subfield: treat as authenticated

  Area by default: credentials check

  Subarea: Credentials Check {area which movi users register to regex function}

  Crossing area: Do not check the credentials

  Search the rules between the two VCS game [email protected] / * / OK.

  The only port of the restrictions in place here are between the VCS control and VCS Expressway, outgoing ports open to the highway of the SANCTION.

  It seems to me that there is a connection problem, as opposed to an authentication problem. also, do I need to configure a SIP domain local VCS-Highway even if I try to proxy, registration to the VCS control.

  Would be appreciated if someone can verify my authentication area also...

  Thank you

  Simon,

  to do this, you re normally the area on VCS - C as "check credentials.

  If you want to proxy of VCS VCS-C-E records, you should not add the SIP domain name to the VCS-E.

  "Rejected by the login server" sounds weird in this case, however, could you share what you use for this deployment, the SIP domain name so that we can verify that your DNS SRV records are fine?

  -Andreas

• TMS Jabber for Telepresence

  We have tested Active Directory for commissioning.  TMS 13.2.1, VCS 7.2.1.

  Jabber accounts allow the connection with where appropriate, assigned to the AD account.

  However, he is allowing the connection regardless of password.

  If the account name is incorrect when you connect, it fails.  If the user is not a member of the appropriate group, it fails.  It is as desired.

  However, if we go all or nothing in password, it allows to connect.

  What Miss me?

  Thank you

  Check settings of authentication of zone and subzone of your VCS, I suspect that they are set to "Treat as certified" that will allow anyone to register regardless of what is presented for authentication.  You must set the appropriate boxes for 'Check Credentials', which will allow only those that match exactly on behalf of username/password for the Jabber account.

  ID suggest you discover the VCS authenticate devices Deployment Guide, which will help you better understand the parameters you need and the desired result you want.

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Authenticating_Devices_Deployment_Guide_X7-0.PDF

• Sum on multi block record for only displayed records

  Dear all,

  I've been invited below question on interview session and I really do not come upwards with a logic to accomplish.

  In a multi record block, not the displayed items property has the value 10. In this block, an element is placed named current_rate (Number data type).

  While the form is running, it will display 10 records, and I need to display the sum of the current_rate for these 10 records. When I scroll to display multiple records, this amount must also be changed based on the record number of display. Is it possible to make forms to operate this way?

  Please advice.

  Thank you and best regards,

  The roots.

  Another way - create element (e.g. "sum") in a block of control (for example, "cb") and write this:

  -Prior REQUEST for the block of data (for example "E1")

  : cb.sum: = 0;

  -After REQUEST for the block of data (for example "E1")

  : cb.sum: =: cb.sum +: emp1.salary;

  Query the property size array in a data block (specifies the maximum number of records Form Builder to retrieve from the database at the same time)

  must be 0 (default = the number of records can display the block, as indicated by the property of block number of records displayed).

  Concerning

• Receptive iFrame for YouTube/Vimeo

  Hello!

  I use this code in Muse (that I found on the interwebs) to create the iFrames (by inserting HTML object) for YouTube/Vimeo reagents:

  < style > container-.embed {position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100% ;} .embed-container iframe, object of container-.embed, .embed-container incorporate {position: absolute; top: 0; left: 0; width: 100%; height: 100% ;} < / style > < div class = 'embed-container' "> < iframe src = ' }} http://www.YouTube.com/embed/t3vsKbR7xws? & color = 333463 & title = 0 & = 0 & portrait byline = 0 "width ="1280"height ="720"frameborder ="0"allowfullscreen mozallowfullscreen webkitallowfullscreen > < / iframe > < / div > "

  It has been working well overall, but now thanks to the significant improvement of the iFrame makes the filling at the bottom of the Mobile/Tablet reader.

  I adjusted the padding to 0% and adjusted the size of frame for the different breakpoints in Muse vs the container and it works better now but still not perfect. Example: www.ahappyproject.com with a browser connection 1000px and especially in horizontal mobile...

  
  

  So a few questions for you good people:

  · Is there a better way to do it?

  · If this is not the case, do you see anything in the code that I could shape of padding to limit or cause the iFrame resize correctly without filling?

  Thanks in advance!

  That you're right, this is how it currently works.

  The only elements that aren't just fluid in width but also (relatively) high, are images. But I agree with you that it would be maybe good to use the widget to other content like video also retain their original size as well.

• Impossible to select the connection pool when creating block init for current_month

  Hi all
  
  I use OBIEE 11.1.1.6.0 Version,
  
  I'm tempted to create a session variable (current month), but I found I could not choose the option of pool connection, is disabled, do not know why
  
  Anyone encounter this issued before?
  
  Your response will be much appreciated!
  
  Thanks in advance
  
  Kind regards
  Anne

  Hello

  try to make
  In the administration tool go to tools-> Options-> general tab and check "allow first connection Pool for blocks. Init option."
  After the checkbox activated, then save it and then try again.

  Thank you
  Deva

• Block size for the Lun ReFS

  Hello

  What is the best choice for the creation of LUN disks of ReFS? 512 bytes or 4K bytes? The range is hosted by cluster Windows 2016 Hyper-V virtual machines. Storage are EqualLogic PS6100.

  Thank you

  Hello

  Just if I understand your question, you refer to the volume block size 512 EQL or 4 correct K?   If so, then it is not really important.  There is no difference in performance at the storage level.  Readers are all dissected 512b, volume 4K simply translated between them on the fly.

  What you want to do is set the size of cluster/sector at the level of the file system to 64K.  Which will correspond to the size of distribution on the RAIDsets.  This allows more effective reads/writes, writes in particular.   \

  I hope that answered your question?

  Kind regards

  Don