TCE test questions

Hi did anyone know where I could get the typical test for TCE (Toshiba certified engineer) questions please contact me at [email protected] as soon as POSSIBLE

Hello

You'll be lucky if anyone from Toshiba are reading this. ;) I'm kidding!

I read a lot of content on the page of Toshiba Europe, but something like that is not available or information on TCEs. It's something special for authorized service partners?

I guess just that this info is stuff Toshiba intern.

Tags: Toshiba

Similar Questions

  • Test question: where Adobe stcok images be saved on your system?

    Test question: where Adobe stcok images be saved on your system?

    They be saved in the folder of active learning on your computer

  • Newbie on impregnation test question to

    I pray to God that I am not violating any term request this. I received an invitation from dipping to participate with a link to a survey. I finished it and after, he said I'm probably would participate. It was 3 days ago and I have not heard anything since. Having never done this before, I'm insanely curious if there is normally a 4-5 day wait... If I did something wrong or if I just wan't selected. Please understand that I was eager to hear something that I want to participate!

    I understand that it is taboo to discuss the test, so I wasn't sure if just ask me these questions would create problems. Yet once again, I never did (only got my Photon 10 months) so I do not know the procedure.

    If this post is prohibited, mods/admin please delete or let know me, and if I can, I'll remove it.

    Thank you!

    You have nothing to fear. There is a bit of wait times with different parts of the test of impregnation.

    Just keep in mind that soaking tests are like Fight Club;

    And the first rule of Fight Club?

    All in good time.

    Thank you

    J

  • LabVIEW fundamentals test question

    Hello

    I have attached a question on the test of fundamental principles of LV. The reasoning cannot understand if the answer must be A or b. Any help is appreciated?

    Thank you

    ABM

    Could at least spell my name correctly?

    Say that the improbability is low is not at all like saying that it is impossible. It would be unlikely to switch the 19 heads in a row, but the probability that the next draw is still 50-50.

    I agree that the correct answer is B, but like many in questions that I saw, the answer has doubts and should be rewritten.

  • Before the test Questions Captivate 8

    Hello

    I use Adobe Captivate 8 and I've added a question 3 before the test.  I edited the first issue and made my questions multiple choice that I went to the second issue of pre-test and that of prestest #1 appears in the pre-test, #2 and #3.  Why - what is duplicate my original question on all the other before the test?  I have no idea how to get rid of on pre-test #2 and #3.

    Any help would be greatly appreciated.

    So weird. Then try: delete preferences. Close the project, locate the CleanPreferences file that is appropriate for your system in the subfolder "Utils" of the captivate installation folder and run it. Then restart Captivate. Are you running it as an administrator (if you are using Windows)?

  • Pre-test Question slides crashing my project

    Hi guys,.

    Here is my weekly 8 Captivate question! (I learned to love how it should still be in beta...)

    I want to insert a question slide multiple choice, as a pre-test, but whenever I click on OK, captivate crashes just downright. None of the error messages or the bug report dialog appears, he just died.

    I have restarted the machine several times, and only made sure no other software is running.

    I really want to like Captivate, I do it, so I hope someone can shed some light on this issue, one of the many questions I have met since the purchase of this product.

    Here's my spec;

    Mac Pro (mid-2010)

    2 x 2, 66 GHz 6-core Intel Xeon

    24 GB RAM

    ATI Radion HD 5770 1024 Mb

    OS X Yosemite 10.10.5

    And i've got to always available storage.

    Help, please! Thanks for your time.

    Karl

    * Update - installed the 8.03.290 patch. Now, ALL blocks Captivate! I have no problems with other products Adobe, or any other application.

    You can try if this also occurs in a new project? In this case use the CleanPreferences, please.

  • Exam test question help

    Hello...

    The question you entered he says"... which of these applications potentially returns more than two lines. »

    As noted the explanation in the answer, C & D returns more than two lines if the table has more than two lines. While the question is written, C & D should be the answer. However, the explanation suggests that the A & B are the correct answers.

    If you have faithfully reproduced everything, what we have here is a combination of wrong answers. I'm shocked, shocked, I say to find a practice test with an error. :)

    Someone screwed up. If we assume that the explanation is correct, then the question should have read something like "+...". which of these queries will never return more than two lines. + »

    That said, if it is a commercial practice test, you really should not reproduce here because of copyright issues. At least, it is not a question of real exam which would also lead to questions of violating the agreement of the OCP candidate and potential loss of certification.

  • Setting a conditional Action for pre-test questions: skip content slides

    OK boys and girls, let's see if this is even possible in a course of SCO, or if this solution multi-SCO (which means I'm toast, because we do not have the multi-SCO aggregator)?

    I want to implement a prescriptive pre-test. In my ideal world, the answers to each individual question would either enable or disable the content related to the question slides. If the user passes the pre-test, they might opt to skip the prescriptive stuff and complete the course. If the user fails the pre-test, they should consult the active content.

    Is it still possible in a unique world of SCO?

    Justenuf

    Will try to explain how I would try to handle this use case, but I didn't try it!

    • For the first condition, you already have a system variable which can be used in conditional actions to check if the user has passed the pre-test. If you use ordinary question slides, cpQuizInfoPassFail will be set to 1 if it is adopted, the value 0 as var is full only after the last slide in the question. If you use slides before the test, you will need to create a variable user, which you can fill with a tip action, based on the value of cpQuizIntoPretestPointsscored or cpQuizInfoPretestScorePercentage.
    • To follow the questions they did correctly, you must create a variable user for each slide of the issue, default = 0. Based on the system variable cpQuizInfoLastSlidePointScored, which is completed after each slide of the question, you can switch the variable user of the slide of the previous to 1 question if this sys var is greater than 0. This can be done by an action at the entrance to each slide of the question. You will need such action on enter also immediately after the last question slide (maybe on a blade of results, where you can also put the appropriate button to switch the content slides, or offer the possibility to go back).
    • For each slide content you will need another (conditionala tip enter action. Condtion will check the value of cpQuizInfoPassFail (or the equivalent for the slides before the test) AND the value of the var related to this question slide. If both are positive, ignore the slide (go to the next slide), if not, just stay on the slide. That action will be the same for all the slides in content related to a question. But another question, you will need a duplicate, because another user variable will be there. If you use CP7, this is an excellent example for joint actions.

    Hope this helps a bit, sorry that I am so busy.

    Lilybiri

  • VCP Test question

    Before VI 3.5 VCB requirements were a machine running windows. Today, you can run VCB as a virtual machine. My question is, the test has been updated to reflect these changes.

    Even with FC storage, you can run VCB in "hot add" mode in a virtual machine, for example there is a "nbd m" switch for the command vcbmounter - data is transferred through the stack of I/O of ESX servers in the virtual machine, so it is not the same as running on a physical machine with the transfer of the data being based entirely on the SAN , but it still works

    Scott.

    -

  • test question

    Test details

    great test response

  • Incompatibility of Mac OS 10.7 Lion characteristics - test question

    As a contributor to the user experience to ask such questions. (I just tried Alizom, which of course is not up-to-date)

    This isn't to find corresponding questions, and there is still no KB article. One of the questions on the compatibility of the Lion features is here: 853020/questions/853020 "Back/Forward gestures do not work in Mac OS X Lion."

    I also note that there is no preview option when you ask for the "ask a new Question" / questions/new. Normally when messages there is a preview option.

    Same user, different connection, I this will mark it as resolved, KB articles should be written or other info will be published, I'll try to remember to edit these messages accordingly.

  • Test question of impact frequency

    Hi all:

    I'm trying to get the natural frequencies of some frames my company designs and I was wondering if there was a simple way to get this to the impact of the sample test of vi and display? Currently, I work with SVXMPL_Impact Test.vi and SVXMPL_Advanced Impact Test.vi and I am running Labview 2010 with the sound and vib add on.

    Andy

    Hi andy,.

    It seems that these example programs to find the frequency of the pulse signal. You can use the same .vi SVFA FFT (Mag Phase) spectrum used in the research of the frequency to find the frequency of the response signal. Once you have this signal, you can use the spectrum SVFA cutting-edge research to read the natural frequency from the frequency data.

  • Momentics IDE test questions

    Hey. When I try to test an app on Momentics IDE 2.1.1 it is so slow to connect to the Simulator - I try to connect five times or more before it will work. He later works (the IP address is ok) - it's the launch of problems window that shows. If the Simulator starts, often the app opens to a black screen instead of the user interface, and sometimes it works OK. The Simulator is 10.3.1.2267. The Simulator is also very slow and does not respond to mouse movements.

    Then I tried to connect via wifi to my BB Q10 (running 10.3) and the wifi worked and the portable and Q10 were connected to it, but trying to pair the Momentics wizrd he says "Network Unreachable: connect. Same thing happened to another coffee with wifi.

    Appreciate any help,

    See you soon

    Justin D.

    Other problems you encounter can be symptoms of a simulator is running very slowly.  Make sure that you have enabled hardware virtualization in the BIOS of your computer settings and in VMWare Player.  You can read a bit more info on that here.  You want a 1130% Performance increase for your BlackBerry 10 Simulator?

  • No count of test questions to the end of course quiz

    I use 8 Captivate. I have a couple of question slides I inserted just to review, but I don't want their cash for the quiz at the end, because they are just review and not be marked. I had issues "survey" thinking that might do the trick but when I created the final quiz that start with question 3 of 8. Is there a way to have just the review questions and ask them to not be marked not or 'count' to the final quiz at the end of the course?

    Some system quizzing variables will include all of the marked objects and question slides. Even if some question slides are not included in the total. I'm sorry, but you will need to create a custom progress indicator, here's a blog where I explained how:

    Custom indicator progress - Captivate blog

  • See Planner 3.0.1 - test questions running simple-VM-remote-RDP

    Hello

    I am trying to run the remote RDP Single-VM test according to the instructions of Installation and user's Guide.

    When I start this test, the client virtual machine console turns off completely and I'm unable to see if any operation is going on.

    Also 'viewplanner.log' shows "connection started from the client: fe80::457f:815 c: a8b6:317% 13" message and I see no progress after that. "

    Everyone met such a problem? Any ideas?

    Copied a part of the viewplanner.log below.

    Thank you

    Subhish

    2014-09-30 11:01:31, 896 INFO Operation: poweron_desktops, start time: killing Sep 30 11:01:29 2014, Total time: 2.15

    2014-09-30 11:01:31, 896 INFO Operation: poweron_clients, start time: killing Sep 30 11:01:30 2014, Total time: 2.21

    2014-09-30 11:01:31, 896 DEBUG creating 1 users and adding to the security AD Group: Test

    2014-09-30 11:01:31, 897 INFO-

    2014-09-30 11:01:31, 897 INFO waiting for the number of virtual machines for you sign up

    2014-09-30 11:01:31, 898 NEWS-

    2014 09-30 11:01:31, INFO 904 got the domain Netbios name: SSRBRM

    2014-09-30 11:01:31, 907 DEBUG add users ['Test_1'] for security AD Group: Test

    2014-09-30 11:01:31, 916 DEBUG all users added to AD security group: Test

    2014-09-30 11:01:34, 287 DEBUG returning to the current state: 0 with status message: [IP recorded: desktop: 0, Clients: 0] [the workload began on machines 0] [Uploaded results-> desktop: 0 (0 errors), Clients: 0]

    2014-09-30 11:02:17, registration of new customer INFORMATION 349: 192.168.100.14

    2014-09-30 11:02:17, 350 registered current INFO status machines: [pairs required: 1] [clients: 1] [server: 0]

    2014-09-30 11:02:19, 287 DEBUG returning to the current state: 0 with status message: [IP recorded: desktop: 0, Clients: 1] [the workload began on machines 0] [Uploaded results-> desktop: 0 (0 errors), Clients: 0]

    2014-09-30 11:02:56, 466 record a new INFORMATION server: 192.168.100.13

    2014-09-30 11:02:56, 467 registered current INFO status machines: [pairs required: 1] [clients: 1] [server: 1]

    2014-09-30 11:02:56, 467 INFO receives the IP address for the computer virtual GoldenDesktop VC

    2014-09-30 11:02:59, 297 DEBUG returning to the current state: 0 with status message: [IP recorded: desktop computers: 1, customers: 1] [the workload began on machines 0] [Uploaded results-> desktop: 0 (0 errors), Clients: 0]

    2014-09-30 11:03:06, 482 INFO receives the IP address for the computer virtual GoldenClient VC

    2014-09-30 11:03:06, 497 INFO Got, the IP address for the virtual GoldenClient computer: 192.168.100.14

    2014-09-30 11:03:06, 498 INFO receives the IP address for the computer virtual GoldenDesktop VC

    2014-09-30 11:03:16, 508 INFO on hold until that all IP addresses have been resolved

    2014 09-30 11:03:26, INFO 514 receives the IP address for the computer virtual GoldenDesktop VC

    2014-09-30 11:03:26, 529 INFO Got, the IP address for the virtual GoldenDesktop computer: 192.168.100.13

    2014-09-30 11:03:26, 530 DEBUG IP: 192.168.100.13-> name: GoldenDesktop

    2014-09-30 11:03:26, 530 DEBUG IP: 192.168.100.14-> name: GoldenClient

    2014-09-30 11:03:26, 530 INFO Running query: SELECT * from hostinfo where IPADDR = "192.168.100.13."

    2014-09-30 11:03:26, 532 INFO Running query: UPDATE SET is_Client = '0' hostinfo, State is 'Unpaired', name = 'GoldenDesktop' where IPADDR = "192.168.100.13."

    2014-09-30 11:03:26, 610 INFO Running query: SELECT * from hostinfo where IPADDR = "192.168.100.14."

    2014-09-30 11:03:26, 611 INFO Running query: UPDATE SET is_Client = '1' hostinfo, State is 'Unpaired', name = 'GoldenClient' where IPADDR = "192.168.100.14."

    2014-09-30 11:03:26, 622 INFO registration remaining VMs

    2014-09-30 11:03:26, 622 threshold of INFORMATION gathered for the number of machines... The plan of starting reference...

    2014-09-30 11:03:26, 622 INFO waiting for virtual machines to settle and sleep during the time scale

    2014-09-30 11:03:56, 622 assignment of client-server INFORMATION for 1 pair

    2014-09-30 11:03:56, 623 INFO Running query: UPDATE hostinfo SET state = 'Matched' where IPADDR = "192.168.100.14."

    2014-09-30 11:03:56, 687 INFO Running query: UPDATE hostinfo SET state = 'Matched' where IPADDR = "192.168.100.13."

    2014-09-30 11:03:56, 697 INFO Running query: INSERT INTO testinfo (test_name, ClientIP_FK, ServerIP_FK, Protocol, username, password, test_state, start_time, type) values "Sinlge-VM-remote-RDP ()', '192.168.100.14', '192.16.

    (8.100.13', 'RDP', 'Test_1', "passw0rd", "waiting", '2014-09-30 11:03:56 ', 2)

    2014-09-30 11:03:56, 708 INFO Running query: SELECT * from testinfo where testname = 'Sinlge-VM-remote-RDP' and test_state = 'pending' and ClientIP_FK = '192.168.100.14' and ServerIP_FK = '192.168.100.13. '

    2014-09-30 11:03:56, 710 INFO-

    2014-09-30 11:03:56, 710 INFO launch the execution plan for the run profile

    2014-09-30 11:03:56, 710 INFO-

    2014-09-30 11:03:56, 721 DEBUG begins to gather statistics periodically VC...

    2014-09-30 11:04:03, INFO 549 from the workload for all assigned pairs...

    2014-09-30 11:04:03, 549 INFO remote command running on 192.168.100.13 machine: Logoff

    2014 09-30 11:04:03, 674 INFO command run on the remote computer: Logoff

    2014-09-30 11:04:03, 751 INFO wait until all desktop computers have disconnected

    2014-09-30 11:04:08, 749 continuous INFO race after waiting

    2014-09-30 11:04:08, 749 INFO Running query: UPDATE hostinfo SET state = 'Busy' where IPADDR = "192.168.100.14."

    2014-09-30 11:04:08, 827 INFO Running query: UPDATE hostinfo SET state = 'Busy' where IPADDR = "192.168.100.13."

    2014-09-30 11:04:08, 845 INFO Running query: UPDATE testinfo test_name SET = "Sinlge-VM-remote-RDP", Protocol = "RDP", username is 'SSRBRM\Test_1', password = 'Q1w2e3r4!', test_state = 'Running', start_time = "2014-09-30 1.

    ' 01: 04:03 "where test_id = 6

    2014-09-30 11:04:08, 856 INFO running commands remotely with args: customer: 192.168.100.14, server: 192.168.100.13, Protocol: RDP, test_name: Sinlge-VM-remote-RDP, vmuser: SSRBRM\Test_1, vmpasswd: Q1w2e3r4!, workprofile: {'IEbpm': 1 L,}

    {"ARbpm": 1 L, "Thinktime": 2 L, 'name': 'StandardBenchmarkProfile_1i', 'hosttime': 1, 'random': 1, 'iterations': 1 L, 'OMP': 60 L, 'video': 2 L, 'applist': ' WORD, ACROBAT, IE_APACHEDOC, EXCEL_SORT, 7ZIP, PPT, FIREFOX, OUTLOOK, IE_WEBALBUM, VIDEO '}, p

    oolname: None, domainname: None

    2014-09-30 11:04:08, 857 INFO adding the callback function for the remote root object to ipaddr: 192.168.100.14

    2014-09-30 11:04:09, 298 INFO added reminder for the command startWorkload on the client 192.168.100.14

    2014-09-30 11:04:43, 161 NEWS connection started from the client: fe80::457f:815 c: a8b6:317% 13

    Couple of fixes and testing is currently underway with success.

    -The version of Adobe Reader must be v9 or v10. I comply v11 and errors.

    -For the 'IE_ApacheDoc_BROWSE', run with IE v8. I ran v11 IE on Windows 7 and became the error. When you update the packages on Windows 7, it will update IE to v11, uninstall this update and it should be good. Found this solution on another thread of discussion in this forum.

Maybe you are looking for