TCP reference is lost

I'm asumption that the shift register remembers the last value. My shift register isn't passing reference to service TCP TCP. I think it's to do with the installation of the property. Can sombody help the VI does not have a valid connection.

In your example - you must connect the Port to be a port number valid (non-zero) and the IP address of the device that you connect to.

I tried to connect to a Server Web (port 80) on my PC (localhost) and it is without error.

You need to see where the error is actually generated - this is from the first call that opens the port.

Your shift register will hold very well the TCP reference. As an aside, it is more common to use a while loop with a true cable at the break only one condition loop to "functional globals ' / 'FGVs' / 'action engines" - Although it is functionally identical to your code.

Tags: NI Software

Similar Questions

  • Serializing TCP reference use?

    Do I need to serialize the use of my TCP reference?  I.e. I control access (using semaphores) my TCP reference when you use the reference in several process?  What is change of response during the review only read write?

    I realize I can create a queue and processes to manage all my writings over TCP, but that the method does not work in my situation.

    You have no need to serialize access TCP write, as long as you don't care about the order in which messages are sent. You won't get pieces of two different writings interlaced with each other. However, as Crossrulz said, you will have a problem with TCP read if you need to match messages with messages received.

    If you do not use an architecture of response control, it would be reasonable to put written TCP where necessary, but all TCP reads in a single loop, and every time that an update comes through, send it to all stakeholders of the code by a registrant or a functional global variable. The only problem with this is that is dying of the TCP connection, you must reconnect, then you will need a way to update the TCP refnum everywhere.

  • Created in the ListView lost when C++ ListItem custome context reference

    Hi all

    I have a listview that generates a list of the custome listviewItems (ie the containers). Containers have a setContextProperty to my database object. But when they are added to the list view, I can't access the database context property. I realize that the listview is not in the same context as the page but I don't understand why when I bind context for the real item the reference he lost?

    Error: asset:///WorkoutListItem.qml:17: ReferenceError: can't find variable: _Dal

    List.QML

    
    Page
    {
    Container { ListView { id: workoutList horizontalAlignment: HorizontalAlignment.Fill
    
     dataModel: _Dal.ListofWorkouts listItemComponents: [ ListItemComponent {  type: "item" WorkoutListItem { workoutId: ListItemData.id workoutName: ListItemData.name } } ] }//End List }//End root
    }//EndPage
     
    

    WorkoutListItem.qml

    
    Container { id:root property int workoutId: -1 property variant workoutName: ""
    
     layout: StackLayout { orientation: LayoutOrientation.LeftToRight }
    
     Button { id: workoutDelete text: "Delete" onClicked: { var result = _Dal.DeleteWorkout(root.workoutId) } }
    
     Label { id: workoutNumberLabel text: root.workoutId }
    
     Label { id: workoutNameLabel text: root.workoutName }
    
     Button { id: workoutEdit text: "Edit" onClicked: { //TODO: Open workout page } }}
     
    

    application.cpp

    
    QmlDocument *WorkoutListItem = QmlDocument::create("asset:///WorkoutListItem.qml").parent(this);
    WorkoutListItem->setContextProperty("_Dal", dal);
    

    Thanks in advance for any help

    -J

    itemRoot.ListItem.view.yourFunction(ListItemData)
    

    yourFunction (data) is defined in the ListView itself

    from there, you have access to your context

  • Change the topology without reference to closing

    Hi all

    I was wondering if I should be able to change the topology of a MUX (reset) without closing the reference?  I have an application that performs a loop on the base initialization, connect, disconnect the sequence for functions OR-Switch and the topology changes for each loop.  I think that my reference is lost, because it becomes invalid after several loops.  I have to close the reference before I reset with the new topology?  I'd rather not have to close every time, because I 'cleansing' steps that close of references outside of the loop. In collaboration with the PXI-2527, LV 2013 and 2013 TS.  Thanks in advance.

    GSinMN

    Ali GSinMN,

    This knowledge base Article should answer your question. The last line reads, "during the change of topology, you close the current session if one is open and reset the map with the selected DriverSetup new.»

  • How to prevent a TCP connection that is closed when the VI who opened it terminated.

    Hello everyone.

    I'm developing an application based on the servers and clients communicate through TCP in LabVIEW 2012.

    When the Server/client opens a TCP connection, it starts an asynchronosly running "Connection Manager", to which connection reference that takes so all communication happening. It all works very well.

    -J' have a situation where a client connection manager can be informed of another 'new' server. I would like to open the connection (to see if it is still valid) and then pass this reference of connection to the main client code to spawn a new connection manager. This avoids lock me up the Client code main with an ish timeout if the 'new' server does not really accept connections.

    The problem is that if the connection manager that opens the connection to the 'new' server is stopped, then it seems to destroy the reference he opened. This means that the other connection manager that has been happily character with the 'new' server has closed TCP communications (I get an error code 1 on an entry).

    I created an example to illustrate the issue which should be used as follows:

    1 run server.vi - he will listen for a connection on the specified port on his comics.

    2. run Launcher.vi CH - it will open a connection to the server and pass the TCP reference to an instance of connection Handler.vi, which he started.

    3. the connection manager needs to send data to the server

    4. stop the Launcher.vi CH

    5. the will of Handler.vi connection error.

    Any suggestion would be appreciated.

    See you soon

    John

    Do not perform the opening and closing of the TCP connection in Subvi. Do this to master VI.

  • FPGA reference questions between the station development and execution? 63195 error code

    I will do my best to describe the problem, I was see.  Note, I tried a few other messages that kind of touch on my problems, but they never seem to have a definitive solution.

    Background-

    I have 3 screws:

    VI 1) opens / runs the bitfile FPGA reference and stores the reference to a global file so that I can call the reference of other screws I need to do this as opposed to the opening of a new reference because I use the FPGA for digital communications and it adds about 100 ms to to open a new reference whenever I need to read/write in the target FPGA to host (100 ms are long in the) digital world!).  Some people use Shift Registers.  I finally called my whole army FPGA screws of TestStand to run a test automated, so it was easier to break up of my functions for open/close/read/write.

    VI 2) called the global reference of the file for FPGA, then going to a read/write node to change the settings of the target, then passes the reference out of the node back to the global reference of the file read/writable

    VI 3) calls close reference FPGA and the function is passed the global reference of the file.

    Question-

    I understand not why this method works fine when I run either of TestStand with station options defined for the development (not running) mode or when I open VI which calls these 3 screws individually in sequential order but IS NOT working when I try to run these screws individually (Run VI 1 - open-> write Ref to the global reference of the file-> Run VI 2 - read global file reference-> playback control function / writing-> error-63195) or when I have run in the same sequence TestStand but together with station for execution options.  Maybe I need to change the TestStand sequence to load all the modules at startup?

    Why the reference becomes lost when global failover between development and execution and why labview cannot drop keep the reference stored?  Is there a work around?

    Finally found a solution.  I do not understand why it is necessary during the reading of the FPGA and not what writing (in fact I do not understand why it worked at all) but I ended up changing the properties of the step in my TestStand sequence for the step calling my DTL_READ.vi to be properties-> Run Options-> Unload Option-> "Unload after executing the step.  That seemed to do the trick to get my test TestStand sequence to work in runtime.

    I still don't understand why this was not required when you run the same sequence in the design environment and why it is not when I call my DTL_WRITE.vi.

    The DTL_READ.vi and the DTL_WRITE.vi pass the parameter labveiw global.vi 'Reference FPGA VI"of a node in read/write.  I don't know if the root of the problem is in my host TestStand and LabView FPGA VI...

    Thanks for all suggestions from you guys!  I'm happy I work but I am still confused by the solution.

  • Windows 7 Ultimate would update, reset everything and he lost my computer, how can I recover?

    I noticed that I had updates ready to install and need to restart my computer, so I clicked on the update computer and turn off.

    He did the updates, then stop. I turned it back on and it makes more updates.

    When he returned to the top, I logged on my user account in the same way I always have, the other accounts where there also, so it doesn't reset user accounts.

    In any case, I noticed my son on the bottom image was not there, so looked around and looks like it resets everything completely.

    My documents are all gone, my downloads, pictures, everything.

    Is it possible to restore it?

    Please let me know. I lost years of stored files.

    Thank you

    Richard

    Hello

    Thanks for posting your question on the Microsoft community.

    Thank you for details on the issue.

    If you can't find a file on your computer or you accidently modified or deleted a file, you can restore from a backup (if you are using the Windows backup utility) or you can try to restore a previous version. Previous versions are copies of files and folders that Windows automatically saves as part of a restore point. Previous versions are sometimes referred to as snapshots.

    I suggest to read the following article and check if it helps.
    Reference:
    Recover lost or deleted files
    http://Windows.Microsoft.com/en-us/Windows7/recover-lost-or-deleted-files

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Problems with arduino labview Interface

    I have the labview-arduino interface, but the problems came when I run the program, sometimes it work perfectly, but sometimes (almost all the time), I can not connect this time, the series of programs and do not show any kind of problems, I can see that in the resourse computers two visa, I don't know if it's because she I soppose comunication , but my arduino do not work, and I can use perfectly with the arduino IDE, but not with VISA, I used the Arduino IDE to be shure that works my Arduino board

    so if you know how to solve this problem, please help me!

    Thank you!

    There is no need to host files somewhere else.  Feel free to download on the forums and attach them to your message.

    Minor first comments.  Why are you re-reading your every 2 seconds config file?  Expect you to change?  If it is then played once and not proofread.

    I think it would be better if you stopped when an error occurred, you can do this by wiring to the RO error enter the stop condition, or use the arithmatic composed with gold.

    But I think the main question you have, it's that your Arduino reference may be whipped out if you do the wrong things.  If your equal comparison is false, you go to the wrong case, where you are not passing the arduino reference.  So when you go to close you don't close your reference and your equipment will always be open, and you try to run again will result in an error.  For even if your loop runs for 0 iterations your reference is lost.  An updated version, which has some of these changes is attached.

  • Windows 7 firewall, just after the power rules

    Hello

    Setting up a private workgroup-to-peer network (not homegroup, no servers or domain) of several PC windows 7.  Have all network connections, defined as 'private' of networks.  At that time, the private firewall is disabled, and the Public firwall is enabled.  Administration tool using remote third 3rd RAdmin connect and control the PC.

    Strange behavior just after turn on/off the PC.  Can ping from one PC to another, but RAdmin tool fails to connect to a PC on just.  The 'Public' windows firewall log shows the RAdmin TCP packet dropped.  Once someone has logged on locally to the computer and then connected to the wide, the RAdmin packages are no longer considered (fell or permitted) by the Public firewall, and the RAdmin progam works great.

    I added a test rule to allow all TCP traffic through any firewall from any PC, any user, any port, etc. (essentially large open) and still have the problem where RAdmin specific TCP packets are lost by the Public firewall.

    I can get it to work by setting the 'incoming connections' for the Public firewall to 'Always allow', but is not an acceptable solution.

    I worked with the provider of 3rd party s/w (famatech) and they also have no idea why it works this way.

    Any ideas how the Windows 7 firewall works right after that the PC is on, but before the user login?  Any ideas how can I do an acceptable firewall rule which will be in force after powering on, but before that the user log?

    Thank you in advance for any help or any other ideas,

    Rick

    Answered my own question.  Found that a set Local GPO do not merge rules defined by the user.  When I moved the RAdmin rule throughout the local Group Policy object, problem goes away.

  • How to replace a block of text by an .ai file?

    Hello

    I am writing a javascript script Illustrator open a file's get a block of text in the layers/pageItems by its content, then replacing it by a placedItem to the incorporation of another file .ai (shape slightly).

    I managed to get the pageItem and to create the placedItem in this way:

    ...
    var item = mainGroupElement.pageItems[i];
    if(item.contents == 'X') {
      $.write("X found\n");
    
      var walkingManFile = File("D:\\walking-man.ai");
      var walkingManItem = mainGroupElement.placedItems.add();
      walkingManItem.file = walkingManFile;
      walkingManItem.embed();
      var scaleX = item.width / walkingManItem.width * 100;
      var scaleY = item.height / walkingManItem.height * 100;
      walkingManItem.resize(scaleX, scaleY, true, false, false, false, 100, Transformation.CENTER);
      var deltaX = item.position[0] - walkingManItem.position[0];
      var deltaY = item.position[1] - walkingManItem.position[1];
      walkingManItem.translate(deltaX, deltaY, true, false, false, false);
      walkingManItem.trace();
    
      item.remove();
    }
    
    

    'element' typename is TextFrame.

    'WalkingMan' form is well drawn, but not translated and resized at all. However, scaleX, scaleY, deltaX deltaY values seem to be good.

    Anyone know what I'm doing wrong here?

    I'd appreciate any help on this!

    once incorporated, walkingManItem no longer exists (like placedItem), then the reference is lost. Get a reference to the new article created by the embed() method and proceed to your script.

  • Deployment of the BCC

    Hello

    After creating a site (including products, references, etc), if I change the name of the catalog will this affect the categories and sub-categories...

    I tried to change my name to catalog and deployed and then after my categories, subcategories, products, references are lost. How to go back to my previous state?

    --
    JK

    Hi jkvel

    If you rename the catalog or folder, child elements should not be lost... If you know the child elements name just type the search window and press ENTER... you can show only items. then rightclick just the item, give add to the project... you can get that you lost... If you do not know the child elements, you can view in the window of the last deployed project admin console...

  • I am garbage?

    Hello

    In some frames of a MC (sandal), I add it to an another MC (gamelevel), I run a hitTestObject between her (sandal) and a few other MCs (they are in Baker).

    Here, in the main class, I do the sandal:

    public void hitBySandal () {}

    var sandalH:Sprite = new Sprite();

    sandal: sandal from var = new Sandal();

    sandal.scaleX =. 5;

    sandal.scaleY = sandal.scaleX;

    sandalH.x = mouseX - sandalH.width;

    sandalH.y = mouseY - sandalH.height;

    sandalH.addChild (sandal);

    gamelevel.addChildAt (sandalH, bArray.length + 1);

    }

    and here, in frames of some sandals, I coded:

    var mc:MovieClip = MovieClip (this.root) ; //this.root is my mainclass

    addEventListener (Event.ENTER_FRAME, checkHit);

    checkHit function (event: Event) {}

    for (var i: int = 0; i < mc.bArray.length - 1; i ++) {}

    If (this.hitTestObject (mc.bArray [i])) {}

    MC. Kill (mc.bArray [i]);

    }

    }

    }

    I have add and remove this eventListener in some other settings where I need hitTestObject.

    1. I need to know if var mc:MovieClip = MovieClip (this.root) is simply copy my main class, which is a huge scene, and if so, it (memory) completely disappears after removing the sandal?

    2 can I NOT build above the mc and work directly with the this.root? (he knows this.root, BUT not its variables as Baker)

    To remove the sandal and its holder, I coded in its last picture:


    Stop ();

    removeEventListener (Event.ENTER_FRAME, checkHit)

    this.parent.parent.removeChild (parent);

    So I do things right or all just garbage?

    MC is a reference to your main timeline.  It is not your main timeline.

    that reference is lost when the movieclip that contains the reference is gc would be.

    I wouldn't say, you are garbage, but you make a mess with a code and class code on the timeline.  Although, if your class code alone is your main class code, it's just a mess ordinary typical of actionscript coders novice.

  • Use Grep to find/replace

    I'm trying to find how to use GREP in find/replace of chage the formatting of a text which is a spreadsheet.

    I worked on the GREP query "~ b (\d\d) ~ b ', which is a paragraph return, followed by two digits, followed by another paragraph of return

    and then it is replaced by ' \t $1 ~ b ', which is a tab, found two numbers and a paratrooper returned.

    What I have to do is change the query to search for ANY number of digits, (which may be delimited by commas: e.g. 23, 36, 48, 50), then replace with a tab + found text.

    I guess what I'm looking for is a way for the query find "any text between two paragraph returns, no matter what that length", but I don't know how to do this. All of the generic options seem to find a single exampler (a figure, a character etc.)

    And you came so far

    Repetition operators are? (zero or one), * (zero or more) and + (one or more times). You can also specify the exact number: {at least up to the}.

    All of these operators are "greedy" by default - they match as much as possible. To to match as less as possible (which I'm sure you will come, sooner or later), add another? After the expression of repeat.

    If this is a number, then possibly another (which will be always included):

    \D\d?

    and what a figure, then zero or as much as 9999999,93856 million:

    \D\d*

    which is functionally identical

    \d+

    And it is between 3 and 8 figures but will be forced to use the shortest possible match:

    \d{3,8}?

    Having said that: a quick & dirty solution for your real problem is to find any amount of numbers, spaces, and comma:

    ~ b [\d,] + ~ b

    (there are more here because otherwise it would correspond also to an empty line). The [..] a list of the hooks - it will match to any unique inside code.

    A more complicated but 'cleaner' way is looking very precisely that for many, comma, space, number sequences - it is cleaner because it lines poorly trained (comma without a space) is fried!

    (She also has another code - operators in parentheses. Look at their place in a good reference GREP - lost people are enthusiastic about Peter Kahrel O'Reilly title, because there on the use of GREP in InDesign.)

    ~b\d+(, \d+)*~b)

  • Lost the remote TCP/IP connection through NOR-MAX

    "" Hi, I try remotely LeCroy WaveRunner 104Xi oscilloscope through "resources VISA TCP/IP" option in Control Panel OR MAX, but the VISA session is lost (0xBFFF00A6) right after I viWrite the '* IDN?" order several times.

    Here's my full configuration process:
    1. install the Passport VISA LeCroyVICPPassportInstaller_1.0.8.exe , LeCroy oscilloscope

    2. setting of the session to follow the instructions (as per joint, LAB_WM827.pdf)

    [by the way, I'm not able to configure the session as "VCIP:'type', I only be able to configure the session asTCPIP0:: 1861:OCKET" ""]
       
        TCP/IP resources VISA-> Create TCP/IP new resource...-> Raw Socket
       
    Set the IP address: 137.57.96.8 (this IP address is successful to be ping by PC and this address is of course belong to the 104Xi WaveRunner oscilloscope)
    Set the port number: 1861

    3. then, there will be a new resource under "resources VISA TCP/IP". Select this option and 'VISA Open Session'. A dialog box will be retractable to the communication of the instrument.

    4. go to the tab "viSetAttribute", the value VI_ATTR_TCP_KEEPALIVE to VI_TRUE, VI_ATTR_TMO_VALUE the value of 15000.

    * NOR-MAX Version: 3.1.1.3004
    * Connection: The ethernet cable is used through the server (No 1 to 1 connection) of the company,

    "After all this, I send '* IDN? \n"(dans l'onglet viWrite ), it returns the value 0 (which means no error occur) and return 6 counts. " So I try to read a buffer (in the viRead tab), but it send me error timeout (VI_ERROR_TMO). After that, I erase the buffer in viClear. Then, I repeat same steps, this time he (viRead) return me connection lost error (VI_ERROR_CONN_LOST).

    This situation is repeated every time that I reopen it new session. In the meantime, I also doubt that the viWrite did send the command to the oscilloscope or not. The oscilloscope was no response after that I have send "ASET" (WaveRunner 104Xi order for autosetup oscilloscope) through the viWrite tab.

    I am out of ideas now.

    What's my configuration OR-MAX problem? or hardware problem? or a server problem?

    Please advice... need help badly.

    Thanks in advance.

    Hi wcsoh,

    Alan and LeCroy Support here...

    Use the type of connection (LXI).  The problem is that when you use the connection TCP/IP (ACIP) type, you cannot configure the WaveRunner 104MXi as a resource of VISA's TCP/IP in MAX.   Note that MAX is not 'hip' to recognize any instrument type TCPIP, including extended via ACIP LeCroy.  To use LXI, go to utilities > utility configuration... and then to the 'Remote' tab, where you will find the button on the left side of the screen of config to use 'LXI '.  If you don't see this button, you will probably need to update your firmware.

    With the type of connection (LXI), you can automatically find the scope through MAX, enter this amount as a VISA TCP/IP resource and configure an alias as well...  You can also point your web browser to the IP address of the bezel, and you will see a status page with information, including the name VISA always useful resource to use when you configure the scope in MAX.  (Note, however, there is no need to use MAX at all when the connections of VISA to LeCroy oscillloscopes!)

    Here is a link to an application note written by me which deals with the LXI interface, including information about the configuration of MAX to show scope: http://www.lecroy.com/tm/library/AppNotes/LXI/LXI_Interfacing_AppNote.pdf

    Do not hesitate to contact me for any question!

    Best regards

    Alan Blankman

  • TCP/IP, the connection lost?

    I'm talking with a supply of California Instruments MX15 using the TCP/IP protocol. I downloaded their GUI to control the power supply remote so I could familiarize myself with its operation. The user interface works fine without any connection problem. I'm now trying to make my own driver (the driver download that they provide on their site does not work) to control remote electric power. I have attached the VI that I try to send just the * IDN? command and query an answer back. If I can get this working, I have no problem to find the rest. However I tried to figure this out for the last day or two and nothing helped. I'm new to TCP/IP, but now I understand the bases because of all my google work many hours:

    I have attached my VI to watch. As you can see I tried to use the VISA function as well as the TCP service. The TCP function works fine without error returned, but returns nothing in the buffer and expires. The VISA function however opens communications on the electric network but when I try to send a command to the power it gives me this error:

    Error 1073807194 has occurred at an unidentified place

    Possible reasons:

    VISA: (Hex 0xBFFF00A6) the connection of the given session has been lost.

    Any help is appreciated, thanks in advance.

    You send a character of endpoint with MAX, but not in your VI. Don't forget to click with the right button on the constant and activate '-' code display.

    VISA server isn't essential.

Maybe you are looking for