TDSErrNotTdsFile(-2503)

Hello

I generated a .tdms file and when I tried to open it in DIAdem I get the following error.

I tried using the repair of PDM tool, but I can't open the file

I use DIAdem 2012.

I tried downloaded a copy of the data in the file however it may be too big, so you will be FTP'd

Hi Tim,.

We have fixed the damaged file and and downloaded in the directory ftp://ftp.ni.com/outgoing/ , the fixed file is in the named zip file "[Fixed] USE 2013-00410 run1-11-25-2013-14-29---.zip. And most of the data in the file was retrieved successfully.

Kind regards

Tianbin Xu

Tags: NI Software

Similar Questions

  • Problem reading the PXI-2503 channels above 23 in mode 1 wire 48 x 1 Mux on Linux

    I can't get the above relay stations 23 in mode 1 wire 48 x 1

    % nilsdev | grep 2503
    OR PXI-2503: "Dev1".

    The topology is set on "2503/1-Wire 48 x 1 Mux ' via the following API, using the 'Dev1 '.

    DAQmxSwitchSetTopologyAndReset (device, topology)

    In theory this means there are 48 relay individual that can be read, however, fails the following:

    SwitchName = "/ Dev1/ch47.

    DAQmxSwitchGetSingleRelayPos (switchName, & pos)

    The error returned is:

    DAQmx error: relay name is not valid.
    Relay name: ch47

    State code:-200202

    who is

    #define DAQmxErrorInvalidRelayName (-200202)

    I can't get the relay station for foregoing relay 23 (/ Dev1/ch23)

    Which is the expected behavior, or is there a hardware or driver problem?

    When you use this switch in "1-wire" mode, we break essentially each (+) / (-) pair in their own channels.  Since this topology uses switches bipolar, only throw which individual terminals cannot be activated independently, another switch is introduced in order to decide which side of the switch is consulted at this very moment, (+) or (-).

    Instead of having 48 simple jet unipolar or bipolar, we have 24 bipolar single jet and two-way to decide what polarity we are referencing a single pole.  You can still use this topology in mode 1 wire 48 x 1.

    To switch manually using relay DAQmx controls, you need to specify the channel switch and polarity as Maggie mentioned.  When you call ' DAQmxSwitchConnect/Dev1/ch47/Dev1/com0', the driver knows that he has to close the relay 24 ch in more 'HLSELECT' AND "1WIRE" route only positive (effectively ch.47).

    The document NOR switches help contains a more detailed explanation of the topology if you access devices > NI PXI-2501/2503 >

    1 wire 48 × 1 Multiplexer topology.

  • 2 different Topologies of PXI - 2503

    Hello
    I use CVI 8.1, MAX 4.5 and switch Exec 2.01, Wndows XP2 to the following situation.
    I had a previous (only 2 x 24) topology for a PXI-2503 switch, with its respective test program.
    For my application, the Configuration of the previous switch is called LUN, consisting of DEV1_ivi.

    For my next test for a different target program of the UUT, I had changed the topology PXI - 2503 DEV1_ivi to double 2 x 12 opening switch BC02 and separating the group 0/1 group 2/3.
    This new configuration, called PSTESTER, works very well.
    But when I got back to the old test program that calls the original called LUN configuration, the program execution caused many errors "could not connect..." ».
    Review of the DEV1_ivi, shows that the original LUN is now set for a double 2 x 12.

    The question is how to configure Switch Executive to keep the configurations of respective switch for more than one test program.
    I hope I included enough information.
    Scott Youngren

    Jason
    Thank you for an excellent response. I thought that it was a "logical" explanation I went to the MAX to see if I can rename or reconfigure.
    However, I can't find exactly how to set up. I'll have to find a tutor to show me, step by step the mechanix of MAX.
    Thank you
    Scott Youngren

  • PDM-2503 error. Is apparently corrupted the file can be recovered?

    We made a quite expensive test with several instruments and gauges on a specimen and recorded data in a PDM file. Before we conducted the test, we recorded in a 'dummy' file tdms for a few minutes and then re-examined the record to confirm that we have been properly recording all gauges. Everything was fine and we knew we were ready to test.

    We then recorded during the test and the TDMS file ends up being about 400 MB. After registration, we have tried to open the file and received the following error:

    "Error-2503.
    Possible reasons:
    LabVIEW: specified file does not have the TDMS file format standards. »

    There is no trace of this error on the forums, or anywhere on the site. The data is there, the file is huge. We just need to find a way to get it back. These data are very important to us. Is it possible to analyze the PDM file and retrieve the data?

    Any time we try to open the file somehow, we get the same error. We tried to open it with the importer of Excel PDM, PDM open file.vi, PDM defragment. No luck. The error seems to occur in the file.vi open tdms.

    The file is very large or I would post here. Help, please

    I solved the problem.

    I was trying to guess what part of the tdms file was corrupt. I was getting ready for a long day to change the bits/bytes to fix corruption, which I did in the past and is never fun, but it was not necessary. With the help of a file parser (http://www.safer-networking.org/en/filealyzer/index.html) I could see that the data were there and the headers are correct in all of the data in the tdms file. It doesn't seem to be any wierdness in the beginning or the end of the file. He told me that the problem was probably in the index file. I had reviewed the new advanced tdms screw LabView 2010 and was looking for something that could help me. The Open.vi TDMS Advanced mentions that he deleted the index file and open the file PDM. I thought that maybe he would re-create the index file. There can be no. The index tdms file has been recreated automatically when I open the PDM file and it re-created correctly. The data is there. The file opens correctly this time. All right. He leaves definitely wondering which caused corruption in the first place and how to avoid it in the future.

    Solution:

    Remove the PDM index file. The importer of Excel TDMS re-create the index file correctly when you open the file. The file is opened without error for me.

  • repair error 2503 PDM file to recover data

    Hello

    I met a system failure, while writing data to a file of PDM and subsequently can no longer access the PDM data and get "2503" code say error this file is not in line with the style of PDM file format.

    I read the forums and have seen some solutions and has tried to fix the file using other vi but the closest, I had a partial recovery with the majority of deleted data. My file must have four sets of data, tests are the first 3 and the 4th is the important data, recovery seems to delete the data in the last section, which is the important thing and the file is greatly reduced. I did this on a copy of the file so still have the original.

    Delete the index file doesn't help at all.

    I tried to copy and opening of another place that does not work.

    I opened in a file Analyzer that provides a load of code in the hexagonal section, I don't understand, but the last entry made at a reasonable time for the data collected and useful stamp.

    The data are relatively simple, different channels of the same format of an acquisition of measurement data.

    It seems that the data is always there that the file is of a reasonable size for the expected data, but I don't know how to fix and read the data, its really important to access the data, can anyone help?

    the files are attached

    Thank you

    -camm-

    There are 17 segments in the file. #1 à #15 segment are all about 'Thermocouple, Thermocouple #1, Thermocouple #2' groups and channels in them. the 16 segment #, #17 talk about "Thermocouple #3" and channels in it that you are not really worried. These 2 segments stored only metadata about them. If everything went right, it should be a #18 segment that needs to store the raw data on it for «Thermocouple #3» channels And this segment should begin at offset 0xCA000. But there is no such segment. The data offset 0xCA000 is not follow the format of the PDM. Analysis all data after 0xCA000, it is not even a piece of bytes corresponding to the format of the header of PDM. All data after 0xCA000 looks like spilled invalid souvenirs in the file when the system crashed. And it decreases the size of the watched file "reasonable."

    The conclusion is that the raw data for "Thermocouple #3" had not been recorded in the file.

  • NEITHER 6229 let me power Signal in NOR 2503

    Hi everyone, I'm feeding a train of pulse (Signal of PFI P2.0) my NI 6229 map to my card to MUX NI 2503.  I pass the MUX of topology Quad 6 x 1 2 son.  My pulse PFI train signal goes to COM1 + and I am firm MUX_CH6 + to use for external signals.  This signal will be on MUX_CH6 -?  Will it be a reference to the ground or no connection?  I know that for a signal from the outside in the MUX and then MUX6 + = SIGNAL HI and LO-MUX_6 SIGNAL = but how about signals leaving the MUX and then power external circuits.  What does MUX_6 have on this subject?

    Thank you very much!

    COM - is not bound by default to what whatsoever.  If you only have a PFI line in your COM +, then your COM-, and later MUX_CH - will not have any signal on it (it is not related to chassis ground etc. so it's just a wire connected to nothing).

  • Files reading TDMS problem in Labview 2010, created in 2009, error-2503

    I did my measurements on my laptop with Labview 2009 installed.

    The file format has been TDMS v1.0

    I can read these files with the TDMS files viewer and I am able to do analysis on my laptop.

    On my desk I have Labview 2010.

    If I run the vi in Labview 2010 analysis, I get the following-2503 error: specified file does not have the PDM file format standards.

    What's wrong?

    I can open the file in Excel with the add-in.

    I've included a tdms file created on my laptop in Labview 2009

    For this problem, it's a bug in LabVIEW 2010 (not in previous versions of LabVIEW), sorry for the inconvenience. While the side R & D to fix this problem, we also a workaround solution, but perhaps a little more complicated:

    (1) Please use older version of LabVIEW (like 2009 or 8.6) for defragement file by using the node TDMS defragment, if it works fine, you can then open it défragmentée TDMS in LabVIEW 2010.

    (2) if the PDM defragment returns an error, then you can always find your defragmened files in the temp directory of Windows, but under a different filename (randomly generated), you can type "%Temp%" Run windows to open your temporary file.

  • Cannot get my player or the Flash Player install and/or error code 2503

    I can't get adobe reader or Flash Player update or install.   When I run maainrenance check I get the error code 2503

    Hi Dachbo,

    1. are you able to install any other programs?
    2 have you made any changes to the computer before the show?
    3. what operating system is installed on the computer?

    I suggest you try to install adobe flash player with full administrator permissions.

    How to apply once with a full administrator access token?
    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

    Installation problems | Flash Player | Windows
    http://kb2.Adobe.com/CPS/191/tn_19166.html
    http://kb2.Adobe.com/CPS/142/tn_14224.html

    Additional information:
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/software-updates-produce-error-codes-2503-and-2502/d484e59e-FA92-4590-8958-4d9e4307f3cf

    Diagnose and solve the program installation and uninstallation problems automatically
    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  • I get error 2503 and 2502 when I try to install or to update most of my programs

    Update itunes, blackberrydesktop, lightroom etc problems.  facilities get all the way to the end and then fail.  I checked the permissions in the installation folder, it is set correctly. Windows and my antivirus are able to install updates. I downloaded revo uninstaller without problem, but I don't know how to use it to fix my problem.
    (I tried to uninstall a non-essential program with revo but got the same mistakes of 2502-2503 and the program wouldn't uninstall).

    The problem was not the date of the system, which was right.

    The problem ended up being incorrect permissions in the windows installation folder.  C:\WINNT \Installer (I use windowXP)

    I've had trouble finding this folder because it is a hidden, System folder a file hidden. When I searched files and folders with the name Installer, it never present nor does it not appear when I went in C:\WINNT.   Finally, I noticed in the control panel "folder preferences".  Which allowed me to show/hide hidden folders.

    Once I found it it was simply right click on the folder, then Security tab and made sure Admin was all permissions which it does not.
    I have no idea how the permissions have been changed after about 6 years of owning this computer!

    Finally fixed!

  • Try to install the fix it and get the error code 2503 and 2502

    Try to install the printer and fix this program. Get error 2503 and 2502 codes.

    Hello

    · What is the number and model of the printer you are trying to install?

    · Who solve this are you referring to?

    · You receive an error message with the error code?

    Delete the temporary files and folders on the computer and check if it helps. You can follow the procedure:

    a. click on start

    b. click on run

    (c) in the Open box type %temp%

    d. remove all files and folders in the location.

  • How to control NI 2503 PXI using labview?

    Hello

    I am vishal.

    I have a job where I have to monitor the temperature of the various components.

    LabVIEW platform is used to make a software that takes the output of thermistor through NI PXI 2503 multiplexer and converts it into digital

    using or pxi5152 digitizer.now I have to control the two instruments of this and take values of the digitizer.

    but the problem is that I don't know who you screw to control these instruments, because I do this first time.

    I just know that the NIDAQmax screws can be used, but do not know how to use it.

    Please give me a little early to make this program.

    Thank you.

    You can find this useful: combined with the switch Modules OR PXI high-speed digitizers measures. Basically, OR-Switch is used to control the multiplexer.

  • OR TB-2605 terminal block for the NI PXI-2503 relay card PIN GND interconnection?

    I use the relay Board NI PXI-2503 and the NI TB-2605 terminal block to impliment some of interconnections, my question is on the Terminal it is a GROUND terminal on the GND PIN. What electric pins or card background basket or internal relay Terminal this 'point' interconnection to?

    Hello gene01,

    I don't directly know what this PIN connects to.  Following the trace, that looks like it is connected to the mass of the chassis as the 2503 itself does not have a grounding pin.  I have this will confirm for you, but is there a specific reason for your application need you to do this?

  • Error 2503 called RunScript is not marked in progress

    Cannot add or remove programs, always get this - "error 2503 called runscript is not marked in progress" the date in Windows Vista SP2 is set correctly.  In my view, that this error occurred initially during the installation of an upgrade of the program.  I also set permissions of files to show the files hidden by a suggestion. I'm at a standstill, any help is appreciated.

    Hi ALSJeff,

    O which program are you trying to install or uninstall?

    This problem occurs if the date is incorrect. Since you've already tried, try the following steps.

    Step 1

    Use the windows Cleanup utility to uninstall programs and then install the required programs.
    http://support.Microsoft.com/kb/290301

    Step 2

    Try to activate the built-in Administrator account and check if you are able to install or uninstall programs successfully.

    http://support.Microsoft.com/kb/555910

    Try these steps and let us know the result.

    Bindu S -Microsoft Support
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • 2503 error code when you try to install Adobe Reader

    error code 2503

    install adobe reader, full error code of 90% 2503 run script, click ok then error code installation 2502 finalize.
    lifted the responses on the web and tried the date and time also permisions (defined as an administrator and have all the rights)
    always get error 2503 and 2502?

    can someone please?

    Thanks in advance!

    Hi ian normal,.

    What operating system do you use?
    What Service Pack is currently installed?
    You are currently on all of your windows updates?

    Have you tried to check the permissions in the folder install? To do this try the following below:

    In Vista, click on start search > type > c:/windows/installer > then right-click on c:/windows/installer at the top under programs and click Properties > click the Security tab > check if system and administrator account has full access permissions > the Everyone account should have read and execute permissions, view the contents of the folder and reading

    Your permissions there these exact settings?

  • I can't install java. I get an error 2503 and 2502 code.

    I am running vista and I'm on a home network. After uninstalling java, I keep geeting the internal error 2503 and 2502 codes when you try to reinstall java... Now I get internal error code 2753 regutls.dll also.

    Hello

     
    Install Java in the clean boot and see if it helps.
     
    To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
     
    Note: Follow step 7 to reset the computer to start as usual after the boot process.
     
     
     
    Hope this information helps.

Maybe you are looking for

  • Weird error driver causes tabs to overlapping & other UI issues

    I've had interface problems with Firefox user for a long time now, but disable hardware acceleration generally remedied the situation. Now it's to the point where it does not, however, it is not as bad as it is when HA is enabled. Basically what happ

  • I'm unable to access Web sites on my iPad

    Last night I updated my iPad with iOS 9.  Since then, I was unable to access the Web sites via Safari.  It gets stuck on the Google page. I turned the iPad and died in new...

  • Need driver for MATSHITA DVD/CDRW UJDa755z.

    My DVD/CD-RW drive does more; I want to update the DRIVER... hoping that my DVD works again.  Help!

  • IOS 15.0. (1) SE2 802.1 X configuration ignores VSA?

    Hi all I have configured dot1x on a 3750 X with version 15.0. (1) SE2 but who have a problem with the MDA: My phone is authenticate successfully, but is placed in the area of DATA instead of voice: display the interface authentication IG3/0/9 List of

  • Poweredge 840 Server [MS]

    Salve, avrei need di avere una quotazione/availability by alimentatore di a poweredge 840 matricola Server. Grazie Andrea Bonetti