Teach the navigation safety for seniors

Similar Questions

• Adjust the URL boxes & search on the Navigation bar for different widths and the wider area of URL provider.

  Years my URL address in the Navigation bar has stretched far enough to allow most of the display URL. An icon and then reload, the box of search engines (Bing, dictionary, etc.) would be about one-third of the width the area URL. After that, the rest of the bar is used for House/bookmarks/history/etc
  Now, without knowing when it emerged, the URL box is too narrow to see but a few letters of the URL that is registered and its menu drop-down is the same. I can find no way to expand it. Everything works fine, but I would like to have the views appearing as before. I kept all the most recent updates and version 20 now. I don't think that has happened because of the update - at least not immediately. As this happened, my Bookmarks Toolbar disappeared. I made sure that the bar has been verified and manually put all the bookmarks that I had. It's OK now. I thought that the way back that could replace the cursor to a point on the side of the boxes in the Navigation bar and get an arrow icon that would expand or restrict the boxes. I'm not sure about that, but I know that it doesn't work like that now. Any help would be certainly appreciated! Thank you.

  I did not send photo since the default restore and put back old icons worked this time. I had tried with attention before, but the spinner was still missing then. Thank you for your help. CFB-

• Change the e-mail address of the parent safety for the family

  I have two accounts of Microsft in use.  The first is a Microsoft e-mail address no I have soon will no longer access to the but is used as my connect to a PC of Windows 8 and is related to my security for the family of the children report.  Then I have a Windows Live ID.  I want to change PC to use this log on and change the e-mail address to which the security reports for the family go to Windows 8.  How to do this and in what order?

  Hello Ellen,.

  Thanks for writing to us, we are happy to help Microsoft Community.

  I understand that you want to replace the primary parent in family safety. I apologize, but we do not have this option of parental control. What you can do is to reconfigure your parental control by using the new account that you have. First of all, you must disable the parental controls from your main account.

  For more information about disabling/removing Family Safety, please visit the link below.

  How can I remove parental control?

  Once you clear the previous parent ID, you can configure Family Safety using the new user as the ID of the Parent account.

  Here is the link using which you can create a new Microsoft Account.

  https://signup.live.com/

  See the link provided below which will help you to set up parental controls by using the new user account.

  Set up parental controls

  Hope that the steps provided are useful. Do we know the State of the question, so that we can help you further.

• Oracle of the MAF: Activate the Navigation controls for goLink

  Hello!

  I have installation media icons to make it easy for our community of users to 'love' or 'share' content, connect, tweet, etc...

  When the user clicks on the icon URL is launched in the display pages Web of the MAF.  UNFORTUNATELY the navigation controls are grayed out.  For this reason my users aren't able to return easily to the mobile application.   How to enable navigation controls for a URL that is launched in a goLink?

  Of course: I have the URL in my white list (under MAF - application.Xml-> Security).

  Please let know us at your earliest.  Thank you!

  TreeStrepek

  The solution to this is to
  ..............................

  1. Yes - set whitelist URL as shown above.
  2. Create each destination site in as long as separate function type = "Remote URL"
     1. This launches the Web site inside of a display of web pages (navigation, web inter view control, then another social media link resets source feature can be selected)
  3. Set the AMX page with components commandLink (icon only, no text)
  4. For each commandLink (that is to say-twitter icon or fb icon, etc...)
     1. Action = #{newsBean.goTwitter}
  5. The newsBean class will have a method "goTwitter".  Inside there is 1 line of code.
     1. gotoFeature ("URL remote FeatureID").

  It's beautiful.  It works as expected.

• I'll be able to see the navigation history for a data card used on several laptops?

  Dear all,

  A map Data (USB Dongle) stores all the data? If the same data card is used for surfing the internet on more than one laptop or personal, I'll be able to see/extract history of navigation of all sessions on laptops? The data card is has traces of the history of the internet at all? Or what's a modem without memory? But again each card data has a memory with her? Isn't? Thus, this memory is used to store a history of the internet?

  You should ask the manufacturer of the device, for this question. However, I would be very surprised if the connected device no matter what minor diagnostic data internally.

• Button in the navigation bar for mobile view is empty

  For mobile display nav bar button contains no content. Target data may be wrong... it is automatically generated so I think that it is a component "bootstrap". I don't have a clear idea as to how this key captures the nav info.

  I made one of these before and Dreamweaver generated auto button with all nav links

  Ok. Here's the code.

  < head >

  < link rel = "stylesheet" type = "text/css" href = "mystyle.css" >

  < / head >

  < body >

  < nav class = "navigation bar default navbar, navbar-reverse" >

  < div class = "container-fluid" >

  <!-brand and toggle get grouped together for better mobile display->

  < div class = "bar navigation-header" >

  < button type = "button" class = "toggle navigation bar has collapsed" data-toggle = 'collapse' data-target="#bs-example-navbar-collapse-1" > < span class = "sr only" > toggle navigation </span > < span class = 'bar icons' > < / span > < span class = 'bar icons' > < / span > < span class = 'bar icons' > < / span > < / button >

  < has class = "brand navigation bar" href = "#" > welcome to the store online Selva Studios < /a > < / div >

  <!-collect the nav links, forms, and other content to alternate->

  < div class = "navbar-collapse collapse" >

  < ul class = "navbar-nav nav" >

  < li > < a href = "#" > about the artist < /a > < /li >

  < li > < a href = "#" > South flowers < /a > < /li >

  < li > < a href = "#" > sunflowers < /a > < /li >

  < li > < a href = "#" > Original Art < /a > < /li >

  < li > < a href = "#" > sea & shells < /a > < /li >

  < li > < a href = "#" > coastal birds < /a > < /li >

  < /ul >

  < / div >

  <!-/ .navbar-collapse->

  < / div >

  <!-/ .container-fluid->

  < / nav >

  <!-/ .navbar-collapse->

  < / div >

  <!-/ .container-fluid->

  < / div >

  < / div >

  <!-/ .container-fluid -.

  navigation-default bar is dark text on a light background.

  reverse navigation bar is a light text on dark background.

  Choose one or the other.

  Your ID target data does not match anything.

  Try this:

  Nancy O.

• How to break through to the display of specific results using the navigation drill for?

  Hello
  
  I have two reports Rep1 and Rep2. I've set up navigation Rep1, Rep2 to drill by defining the column property to 'NAVIGATE' on Rep1 and have a 'GUEST IS' on Rep2.
  
  It was working fine when I tested it on OBIEE installing on my laptop. However, when I tried this on instance UAT one client I have the below question.
  
  Description of the problem: both Rep1 and Rep2 have multiple views. However, I need to drill the pivot view in rep1 to rotate the view in Rep2. I display the view of pivot since Rep1 on the dashboard page. However, whenever I try to break through to Rep2 he always exercises in table see REP2 but I want to drill to rotate the view in REP2.
  I tried to remove the table display in REP2 and then tried to navigate drill REP2. But now it does not display any view of Rep2.
  
  Is it possible to force display of pivot in REP2 drill to see to this navigation?

  BTW, if you go to your mode of Compound, what do you see for report 2? The PivotTable view is visible under the title of the view or is there anything under the title? There is a chance that you have a PivotTable that is configured, but you have not added to the compound mode and that you went straight to the Table to remove it. If so, you'd get your results. Please confirm that this is true or not.

• How to configure the Navigation hierarchy for any construction spec?

  Hello.  We have recently installed the pack of H - Nav solution with configuration of literature values.  In our H - Nav views, we see that some of the documents issued by forumations are not extending to the whole of the hierarchy.  Specifically, we have a few products that have 4 or 5 layers of forumations.  We see only two layers, and would like to see build it together.  We have tried to increase the number of key = "HierarchyNavigatorDefaultExpandedLevels" value = "5", but has seen no increase in the number of PKIDs.   How can we change our Setup to get all the layers?  The keys on which need modification?  Do we need to reinstall or can we change the configuration and run a process?

  Pointers would be greatly appreciated.  Thank you.

  When you use the referenced output of a formula in another formula you can select the context inside the front gate.  A drop down menu appears in the cell of entries where you can select the forumulation.  It's the formulation denorm uses to find the appropriate children.   If no context is selected, the system does not know where to go and treat it as a standard input, stopping at this level.

  If the context is defined and the system is not yet find kids go ahead and drop a SR.

  Let me know if you need me to send a screenshot.

• Is there a way to block the spread of navigation bar for a specific page/section?

  Hello

  I would like to know if it is possible to hide the navigation bar for a specific post/page?

  In our society, we have built a presentation guide to our sales representative. We have recently added a html content embedded in the presentation.

  The question we have is that the html page contains drop-down lists boxes. Each time we press the drop down menus, navigation bar will appear. It really is intrusion with the user experience.

  I know it is possible to turn it off for the application, but is it possible to simply to block for the page that contains the embedded HTML code?

  Thank you!

  John

  If you make your HTML consume all the gestures of contact on the page I think it's going to keep the top navigation bar to appear. However this does not mean your readers will not be able to slide off the page, and you can use hyperlinks to take them to other content within the application.

  If you use DPS 2015 instead of that we have API, you can call since in the code HTML to have the finer level control over how the gestures are handled in HTML.

  Neil

• How to disable the navigation bar in an article

  I have an image slider in a HTML article which can go full-screen. The button to exit full screen, however, is at the top of the display window and becomes hidden by the bar when the user clicks on the navigation screen. Is there a way to disable the navigation bar for a HTML article? I've attended MAX and remember them mentioning something HTML API, but I don't know how it works.

  Hi Zac,

  There is an API, and you can use it to block gestures are passed to us in your HTML article. See Digital Publishing Solution helps | Create articles to HTML for DPS 2015. There is information at the bottom of the page.

  Neil

• How to remove an individual label in the navigation menu

  How to remove a single label in the navigation menu - for example I don't want a 'HOUSE' label visible when im on the home page.

  In order to be able to define your own label for a menu item, you would use a manual type menu. Other types of menus inherit page name as a Label for the menu items that you set in Page Properties or Plan mode.

  Or you could exclude the "HOME page" of the Menu options via the context menu in Plan/Design mode.

  Thank you

  Vinayak

• I have a scooter that can not go on the road. It is a navigation problem for cards from Apple and Google Maps for the watch. Does anyone have a solution?

  Hello

  I recently got a scooter that goes from a maximum of 40 mph and cannot legally go on the highways. I was worried about navigation on the thing, since I can't hear my phone, but I thought the directions can get sent to my watch. My problem is that Google Maps can really follow the navigation on the watch, so I can still see the signs when I put my wrist; still, he turns back to the lock screen. So I stop, remove my gloves, and pull up the directions. On the other hand, Apple cards can't do navigation for bicycles or avoiding the road. I tried to use cards of Apple walking directions, thinking I can correct errors on one-way streets myself, but Siri decided I was going too fast, spent my navigation to drive and tried to send me on the highway.

  Anyone has a solution, or am I better off memorizing the card before entering the thing?

  Thank you!

  Hello

  To have your watch to return to the last used app to raise your wrist:

  -On your iPhone, in the application of Eve, go to: Watch My > General > screen Wake > under the heading "Raise the wrist", choose the RESUME last activity.

  If we consider how you could use your watch, note the safety information important in the Apple Watch user's Guide, which includes sections headed Distraction and Navigation:

  https://help.Apple.com/watch/#/apdcf2ff54e9

• Is it normal for a Macbook Pro operate at a temperature of more than 60 degrees celsius with only the navigation? Left side warms also many...

  My Macbook Pro Late 2011 very hot especially on the left side. Temperature exceeds the 60 degrees celsius, with only the navigation. Is this a normal behavior? Fans operate at a SPEED of 2000 more or less. I would like the experts to guide...

  From what you say, it seems that your MacBook fans work as usual (and unfortunately), and 60ºC is a good temperature for a MacBook Pro, so I don't think that there is nothing wrong with your Mac. Note that the temperature may also depend on what websites visit you and complete what they use. for example, Java and Flash Player increases CPU utilization and the battery, and this, temperature.

  In addition, note that your MacBook Pro is made of aluminum, and it can quickly become hot even if you don't do any heavy task. This does not mean that there is nothing wrong with it

• Dropbox for bookmarks or downloads of the navigation bar adds space between the navigation bar and bar bookmarks.

  When I press the button edit bookmark or download the toolbar for navigation that a line of space appears between the navigation bar and the bookmarks toolbar. This problem is corrected when I start Firefox in safe mode, but not when I boot normally and disable all addons. Please tell us how to solve this problem. Reseting Firefox and install all add ons still causes too many problems, so I hope to be able to solve this problem without reset.

  [url =http://postimg.org/image/uwr2x6x21/] [img] http://S28.postimg.org/uwr2x6x21/space.jpg line / URL

  You can also try to delete the file localstore.rdf (resets the toolbar configuration) in the case of its corrupt.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• And how does one remove Christmas lights that have been offered as a decoration for the top and shifts of the screen. They tend to hide the navigation bar.

  And how one removes the Christmas lights that have been offered as a decoration for the top and bottom of the screen. They tend to hide the navigation bar. Several days ago Firefox gave the 'dress-up' in a message.

  It seems that https://addons.mozilla.org/firefox/addon/christmas-lights/ is added as an extension, but is categorized as a character (lightweight themes). Go to tools > Modules then check extensions and themes, and then uninstall it.

  Now that the status bar is now the toolbar addons that I see those that are listed are all personas and they do not affect the toolbar addons you would also find a theme, and think that it must be very confused now that I no longer able to filter topics with a Google addons research - phooey.

  Extensions can be identified with intitle: Add - ons and have changed my research of extension add-ons accordingly.