Tech Help...

How can I remove the W32Blaster.worm and the malware that I have in my computer?

You can try using Malwarebytes

www.Malwarebytes.org

Tags: Windows

Similar Questions

  • How can I get rid of popups to "iOs-tech-help?

    How can I get rid of popups to "iOs-tech-help? I can't open tabs or preferences

    Force Quit Safari (--> Force Quit - Safari), and then reopen the browser safe by holding down the SHIFT key.

  • 7510 Photosmart HP e-All-in-one: Photosmart 7510 does not, tech help links not working no more.

    My 7510 Photosmart was working fine just a couple of days, but suddenly, I have a problem: he will pretend to be printed, but there are only a few weak gray lines (which do not match with the document being printed).  I tried the links online to HP technical support, but they all fail, with messages such as:

    Internal Server Error - read

    The server has encountered an internal error or misconfiguration and was unable to respond to your request.

    Reference #3.9733fea5.1428886261.1ce573bc

    The ink cartridges are all quite complete, except for the small black - the big one is full.  I got no error message.  I have reset to factory settings, without success.  I was printing a PDF file.  I don't think that the problem is with the computer, because I tried to print with another computer, with the same result.  The computer is a PC, in Windows 8.

    Help!  I need to print an extension with the IRS!

    Hello

    Please try the steps below...

    1 > while the printer is turned on, open the cartridge door. Check if the ramasseherbe moves automatically.

    2 > wait until the printer goes into silence.

    3 > try to manually move the carriage.

    4 > if the carriage does not move, it could be a ramasseherbe jam. You may need to check if there is a paper jam in the field of transport.

    5 > remove print head, close the printer cover. Unlug if power cord back of the printer.

    6 > wait 30 seconds, and then reconnect the power cord to the back of the printer.

    7 > install the print head and cartridges when prompted.

    If you the problem persists, please call HP Tech Support for assistance because he clould be a problem with the print head.

    If you are in the United States, the toll free # is 1-800-474-6836.

    If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

  • Need tech help. : restore or partitions, filesystems, etc..

    This question is for gurus and SanDisk tech support.

    I bought a Sansa Clip today and in learning to use it with my Linux (Ubuntu Hardy Heron) system, which is all messed up. I ended up using a partition editor under Linux to completely clean the clamp, then give him a MSDOS disklabel, a single partition covering the memory of 1 GB of this Clip and formatted this partition as a FAT32 file system.  However, as you can guess, this was not good enough.

    I can always connect the Sansa Clip to the computer and can partition and format (file system format) the Clip, but I hope someone can tell me exactly how many partitions to create, size, what files must be placed in the walls, what should be the names of files. Basically, I'm putting back the Clip in usable state through the understanding of some of these technical issues. I'm a computer user experienced enough (Linux and Mac only, not a lot of experience on Windows, sorry) and am not afraid to try anything. (That's why I messed up the Clip so bad.) :-)

    I tried many or most of the troubleshooting steps mentioned in this forum, but this problem is beyond their scope, I guess, because my Clip gives me still a message of error "not enough space for music DB" when it is disconnected from the computer, even immediately after deleting the partitions on the device and creating one or two new partitions (I tried to create 2 one as a partition of 16 MB (, FAT16 and later in another attempt a FAT32).

    Anyway, if anyone with a technical mastery can suggest what to do, he can help me and some other forum readers who like me are somewhat technically the inclined and capable, just clueless on this cute little particular device. :-)

    There is no sophisticated Linux users here on the forums of SanDisk, it would be a big favor if make you a picture of the memory of your Sansa Clip using the dd program the command line in a terminal and then available this picture of me and possibly others who intentionally or unintentionally (but for what they thought were good reasons) their little Sansa Clip hose. OR, perhaps, the good people in technical support at SanDisk have a utility to restore the partition/system files-files/system or a disk image? (hope, hope) :-)

    -Steve

    Have not yet heard from the SanDisk technical support, but as so often happens when people post problems in the forums, I finally managed to solve my problem in spite of the lack of help.

    SO, for all Linux users who may have a SanDisk Sansa Clip and are having problems with it, here's a brief overview of the problem and a solution.

    How to restore a watered Clip

    I recently bought a cute and tiny Sansa Clip 'MP3 player '. Hardship of editing under Linux (had old firmware), and after consulting various online here and at UbuntuForums.org and AnythingButiPod.com forums, I have read many reports that said the same thing: the firmware update, or if all else fails, reformat the Clip.

    I downloaded the SanDisk "Sansa Updater" application and tried to run the program only Windows under Wine (Windows emulator) under Linux. No luck; suspended program. Then -before I discovered we could manually update the firmware - I reformatted the flash memory of the drive with gparted, a partition-and-filesystem-format-from-scratch program under Linux. It was before I learned that "reformat" on the forums mean 'use the command 'Format' of the element. Stupid me!

    Yes - The Clip is so useless, a cute little plastic brick next to the computer. I contacted SanDisk technical support (still have not heard from them, a few days later) and wrote messages on all the forums begging for help.

    As is the case several times, I ended up helping me. I've done some research more and I tried a lot of ideas. One of them worked. The solution consists of two parts.

    Important note
    Before you try the following steps, if your Sansa Clip has not been completely rendered useless yet, you can use its own settings of--> Format command to reformat the Clip. It's easier and better, and then you can update the firmware manually (see the forums of SanDisk or AnythingButiPod.com forums for versions of firmware), or using the program "Sansa Updater.

    How to get a useless Sansa Clip works again

    1. Reformat Sansa Clip flash memory and install a FAT32 file system. You can reformat in Linux using Gparted, but the Clip still won't work because the Clip wants the exact settings that Windows uses when it formats a blank disc. However, reformat the Clip in Gparted will serve to ensure that it will not work absolutely nor be recognized by a Windows machine. So go ahead and this once if you wish. Then connect the Sansa Clip USB2 to a computer running Windows or Vista. Then use Windows File Manager (Windows Explorer) to try to open the drive letter of the USB Windows detected device. Windows will give you an error message saying: the drive is not formatted and offer to format it for you. Choose the FAT32 file system and uncheck "quick format". Then let Windows format the Sansa Clip flash memory.
    2. Once the Clip is in the Windows format, delete ('remove hardware safely' icon in the system tray, then unplugging the USB cable). Then go to SanDisk.com and download the "Sansa Updater." This application is update the firmware for the Sansa Clips that are already working, but believe it or not, it can also completely restore the firmware and de-structure of directories and files including the Clip needs to run. After downloading and running or installing the update for Sansa, close the program. Then reconnect the Clip on Windows. It must be recognized and the Sansa Updater program may start automatically. If not, then find the Sansa Updater in the start menu, run it and follow its instructions. It will get your Sansa Clip, then download the latest firmware, then restore your Sansa Clip used-to-be-there's no need to Virgin State, approved, fully updated that works very well with Ubuntu Hardy Heron and even now supports OGG and FLAC!

    Best wishes to all. Hope this helps other users to Sansa Clip.

  • Expert Microsoft Tech Help? Is this true?

    I received a call from Microsoft Tech of the Expert opinion. They guided me through my computer and showed me about 17 000 errors on my computer.  They have been listed as something WMI or event.  They are supposed to call me tomorrow to help me fix it. Can someone clarify this for me?

    Thanks in advance

    Whitey

    Hello

    This is a scam DO NOT except or download anything from microsoft will not call you!

    http://www.Microsoft.com/Australia/PressPass/post/Microsoft-issues-warning-on-phone-scam

    Concerning

    GT4U

  • BlackBerry Smartphones Tech Help

    I had a Blackberry as a gift for Christmas, and when I migrate software blackberry and Palm, the two software sync software freezes and crashes. Any advice?

    You can export the contacts in your Palm file cvs and after the importation of the outlook file in your pc and you are ready to synchronize with the BlackBerry.

  • AE lost my control more, less and reduce in the top RH corner? Tech Help!

    Hi all

    I have something strange going on. I'd swear that there used to be the standard browser control-+ and reducing the box in the top RH corner as in any window and all the other adobe products. However, I had a virus he was hiding in Adobe reader. I think that I cleaned it as I scanned with two companies of different viruses. Both found nothing. Deleted my Temp folder, trash dumped after an AE installation. Re installed AE and still no control window?

    More in my bar start where my programs are Adobe Master Collection folder is I opened that an icon of my AE is a generic icon, even if it will work as a shortcut.

    The other thing is that it is obvious in my taskbar as a "pinned icon" here is a screenshot of AE no + or - in the corner at the top...

    Win7 Pro Srv Pk1

    3770 k intel

    Z77 mobo

    NIVIDIA quadro 4000

    Everything is updated drivers/versions

    I also lost Adobe Reader I had to uninstall as it was the Trojan House file. I've pasted the disc but didn't see not the icon of re - install.

    ae screen.PNG

    Looks like if you pressed Ctrl + \. Press it again. See this page for details of this keyboard shortcut.

  • Help Urgent Tech UHT

    We were contacted by UTH ambiguities ('Urgent Tech Help'), they are certified by Microsoft for Windows - sounds suss - person knows nothing about them?

    Fake phone calls to technical support

    Calls unrequested telephone of this nature are almost always a common scam. Do not let them give any info, do not give access to your PC, not give them all the money and do not go to all the websites that they suggest. One moment.

    Please see:

    http://www.microsoft.com/en-gb/security/online-privacy/msname.aspx .

    Microsoft issues never not solicited for phone calls of support or security.

    These types of callers can use completely fictitious names or bogusly claim to be of real companies other than Microsoft as well.

  • Help with Sony Station Launcher for Everquest

    I tried for days now to get the Station Launcher to start without giving me an error message saying «the instruction at 0x039dfcde referenced memory at Oxffffffc.»  The memory could not be read. "I have downloaded DirectX 9.0.c file.  I'm running the Station Launcher as administrator.  I've been on the forums Everqest Tech Help, I spoke to two technicians in cat and two on the phone.  Nothing seems to help.  I get very frustrated at this point.

    Hello

    Check out these links:

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/3ff646ea-78b3-4AB4-9bfe-a8539bd5b903

    http://social.answers.Microsoft.com/forums/en/answersfeedback/thread/d1e7c3af-0cf8-4F06-b885-181fbf613edc

    http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/71855122-C256-40f5-9DC6-2425b8c30145

  • Help! During transfer music error code

    I'm trying to transfer music from my computer to a memory card from phone to sd (8 GB) format. I get the error Code: 0x8007045D error. How can I get around that? Does this mean I have to buy a new memory card?

    My phone said the card was corrupted and needed to get in shape, so I transferred everything to my computer, reformatted the sd card in phone mem and tired to put the music on when it would not transfer anything! Help! Before buying a new card, I want to know if there is something I can do myself.
    Tech Help is much needed and appreciated!
    Ms. Fox

    Hello

    (1) what is the brand and model of the phone?

    See the link below:

    Some Secure Digital (SD) cards may not be recognized in Windows Vista

    http://support.Microsoft.com/kb/939772

    There could be damage of card memory as possible. I suggest you to contact the manufacturer for assistance.

  • need help with 'ifs' field calculation

    Hello

    I am trying to create a field in a form that adds 20% for a cost base according to which of these options is selected in a drop down list which forms the title of the form

    This is a form of new/used vehicle and requires 20% VAT to be added to the basic price if the vehicle is "new".

    If the "vehicle" then no VAT should be added

    Is this possible?

    If this can help I could use radio buttons to determine whether the vehicle is 'New' or 'Used' in the upper part of the form?

    I'm out of my depth here with java - I'm a humble designer more usually responsible to make things just look pretty on the page!

    You can you "techies" help?

    Yes, and it is even possible to do it without an 'if' statement and without writing any JavaScript.

    You need to know about domain names. Using the field names, types, and properties:

    Subtotal - amount to calculate the tax on - field digital - read-write - visible

    TaxRate - tax rate applies if taxable - digital field - read-only - hidden

    Taxable - check 2 boxes eponymous - an export value of 1 (default is checked), the other export value 0

    TaxAmount - amount of tax to be applied - field digital - read only - visible - calculation: "field is the product of the following fields: ', subtotal, TaxRate, taxable.

    -Sum of the subtotal and TaxAmount - GrandTotal numeric field, read-only, visible - calculation "field is the sum of the following fields:" TaxAmount and GrandTotal

  • Have just been told by BT that I need a new/different version of Thunderbird to work with the new system BTMail (previously BTYahooMail) - I do?

    I have btinternet email for years and Thunderbird for too long and have been happy with both. Unfortunately, I'm not technical enough to understand the majority of assistance or instructions on the information pages of support technique/Thunderbird, but haven't managed to get TB put in place in the first place (long time) and it seems to have worked well since. However, on Friday both of my accounts to BT (sets of two numbers), so two BT email addresses have been moved new old BT Yahoo mail BT mail. I was unable to connect to one of them, but the other was very good - I have had help 'screen sharing' a technical chap BT to sort. However, he was able to Conect Thunderbird with email servers. I said to BT and the chap tech tried to sort on screen sharing, but could not (and I have been unable to follow what he was doing). A few months ago, I made a few changes, as requested by BT, to allow for the transfer to go smoothly (!), but the man has changed some things Friday, I think, as well. He could not solve the problem of TB and I can't figure it out at all, and the Lady of BT Tech help to whom I spoke this morning (and who had managed to fix my problem of connection BTID, fortunately) had a look and suggested that maybe I needed an update/new/different version TB or 'another email address. Well, I really want to stay with Thunderbird and was hoping that someone here could explain it in simple English for me, please? I was wondering what will happen, assuming that I need to download an updated version / different, if I did this and then sort of re-installed my existing BT email addresses (as if I started again with Thunderbird)? I hope that there is someone here who can help you - thank you - I'm rather fond of this little blue bird. Thank you.

    Hi, Zenos, thank you so much for your help - I have now (touch wood) have my email back after following your instructions. If all goes well, it will remain in operation during my upgrade to infinity next week.
    Thank you for taking the time to answer my question a little disjointed.
    Had never heard of before critical path, I thought that BTMail was BT Oh, well, as long as it works I guess (I hope it's better than the Yahoo system).
    Thanks again.

  • IPAD keyboard does not appear at the hotel wifi connection

    I want to open a session in the hotel wifi - how to get the keyboard?

    Call the technical support of the hotel. They probably have a concierge or tech - help because I can assure you that the problem happens all the time at some hotels.

  • Laptop HP Stream - 11-d020nr: laptop HP Stream stuck on reboot screen

    Hello! So I recently had my laptop, about 2 weeks and it worked fine so far. The Google Chrome browser has been unresponsive (I guess because I opened it an update trying to be installed) so I decided to restart the computer (after the update was not, of course, not during) he asked if I wanted to cancel the reboot or strength; I chose to force the reboot. Now, I've been sittung here for an hour and a half waiting for him! Ive even tried to force a manual shutdown by holding the power button, but again that used to do anything! (I held for 20 sec)
    I don't know what to do because it's always on blue reboot screen. Help, please.

    Hey guys!
    So I guess you all have the mobile workflow specifically.
    What happened, it was the CPU is 100% frozen and unfortunately you cannot fix it yourself unless you have equipment and well know computers.
    So the only solution is to take your laptop in a store without doubt that you bought the laptop that they should have a tech help station; I took mine back to the store I got it from (aka micro Center) and a computer scientist, he fixed for me.
    So the problem is not major and your files should be secured. Mine were fine and nothing was wasted.
    Hope that helped and sorry it happened to you all too. It totally sucks but at least its fixable

  • Phone of MagicJack Tiger Jet programs application compatibility

    I have used MagicJack since 2008 and experience a problem recently is that asist romoting technology couldn't solve and crashed my HP.  Now I have a new Toshiba and it does not work at all despite the distance tech help which caused my new pc down.  The error indicates an instance running of mj and even ending the process in the task manager that is not disable the running program does not finish when prompted?

    Hi Glowing4U,

    ·         What version of Windows is installed on your computer?

    ·         Did you do changes on the computer before the show?

    Reply with more information about the issue so that we can help you better.

    You can also contact the MagicJack for help on the issue.

     

    http://www.MagicJack.com/techchat/

     

    http://www.MagicJack.com/5/magicfix.asp

Maybe you are looking for