Tecra 8000: battery not charging

Similar Questions

• No noise and cache-battery not charging - Satellite L755 - 1 CD PSK2YE-08T00YFR

  Hello

  I have two problems with my toshiba L755 - 1 CD PSK2YE-08T00YFR

  1: no sound

  When I try to grab the microphone into the mic port, the sound Manager, it freezes and any use of sound programmes it freezes like vlc, I turn off the audio Manager Windows, disconnect me and logging devices device when I clicked in the sound icon troubleshooting the problem and the noise come buck and when I again seized the microphone he not freeze the sound Manager , I disable the audio device in the Windows Device Manager, and I continue to work without sound for 30 min ~ 1 h, I reboot my pc to start windows (windows 7, I don't remember what happens may detect a new device), I click on the sound icon troubleshooting two devices (photos attached) I chose 1 and it doesn't solve the problem but the speakers work not , I'm going to the sound Manager I see a disconnected device (maybe my card sound, pictures attached) and two new devices (attached pictures) and I see some changes in the reliable data connector (attached photos), and in the tab input device, I see a disconnected device (maybe my card sound, pictures attached) and three new device a MIC webcam (photos attached).

  before this problem the webcam and microphone webcam not working do not (I think I have hardware problem - webcam with sound card).

  I restart my pc and I chose "load factory default settings" from the bios when windows start detects a new device (webcam) but the sound does not (webcam and microphone webcam works fine now).
  I have try to disable the webcam and sound card, enable the sound card, reboot, load default... linux live cd... nothing, no noise.

  I try to test the bios beep, it works, I can hear a sound signal.

  I don't know how to solve this problem
  I need noise, I miss her, I can't do anything without the sound, please help me

  Attachment 558 Attachment 559
  
  

  2: battery not charging

  My maybe of battery 30 ~ 40%, when I suspend my pc (for 8 ~ 11: completely discharged battery) I forgot to load it, the morning I plugged it in HQ, 2 hours the led remains red when I turn on my pc and check the battery level, I see only 4% (hip, accused), I remove and buck battery but does not support he notices 4%.
  How can I recharge my battery?

  I need fix the sound problem

• Tecra 8000 does not initialize to top

  My Tecra 8000 will not initialize-to the top (previously worked fine).
  1. the Red "TOSHIBA" icon comes up, then it just "grey screens" on me.
  2. I can start up to the A: drive using a bootable floppy and I see the hard drive (C:\) and it seems OK.
  3. I checked the settings of BIOS (ESC, F1), and they look OK.
  4. I have Windows 2000 installed.

  Any suggestions? Thanks, Neil

  Hello

  It seems that the laptop properly the Toshiba screen.
  In this case, there should be no problem with hardware or BIOS.

  Eventually switch you to the external display? I would recommend the connection of the external monitor to check if something pops up.
  But if it doesn't help, so possibly damaged HARD drive could be responsible for this issue.

  Have you tried to boot from the CD? You see something?

• battery not charged after the power failure

  I have a HP ENVY 14-2050ed Beats Edition Notebook PC

  I was a shortage in the supply cable which caused my HP down.

  After restarting the battery wasn't in charge more. The laptop works fine when it is connected to the (new) cable, but battery does not charge and the laptop does not start with a charged battery.

  I ran all the steps at http://support.hp.com/us-en/document/c00259897 , but he has not found the cause of the problem.

  What type of repair is required to fix this problem?

  Can you recommend a repair center in the Netherlands, or near Rotterdam?

  Thnx

  Onno

  Hello

  I replied to the other thread on this topic:
  http://h30434.www3.HP.com/T5/notebook-hardware/battery-not-charged-after-power-shortage/m-p/4257042

  Thank you

• Battery not charging - Thinkpad E531

  Dear Lenovo,

  I have been using Windows 7, but I recently changed to Windows 8.1.

  In Win7, I was able to install and use the Lenovo power management software, and I changed the threshold of 40 to 50% battery.

  After I installed Win8.1, I realized there is not any software for Windows 8.1 E531 power management, so I can't charge my battery above 50%.

  It seems that power management software makes somekind of related material change or do not remember my previous settings which I did in Win7.

  How can I change the thresholds without reinstalling windows 7 and power management software?

  Could you give me a link to a management software can be used for Windows 8.1 E531 Thinkpad power (which is 100% working)?

  Another solution?

  Thank you!

  Hi Tray86,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the battery not charging over 50% on your ThinkPad E531.

  You must change the setting of control dependence of Lenovo to always fully charged, please visit the link below and follow the steps from that.

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/ThinkPad-battery-won-t-charge-past-50-under...

  I hope this helps.

  Best regards

  Agnes Kumar

• Laptop battery not charging not (630 HP)

  Hi all

  Laptop battery not charging. When I plugged on current alternative, it shows plugged in, not charging but acute battery

  load. I change the battery but problem not solved. Then I replaced the power supply but problem not solved.

  Advice me please.

  Cell phone: HP630

  error: no current charging

  OS: WIN 07

  Thank you

  Migas

  Go in Device Manager. Find the battery device. Click the triangle next to the battery to decompress. Left click on the device of the compatible battery Microsoft ACPI control method, then right-click and choose uninstall. Once he uninstalled it can install on its own, but if not only, right-click on any device and select search the hardware changes. The operating system must install a new copy of the device of the compatible battery Microsoft ACPI control method.

  

• BlackBerry Z10 battery not charging 100%, remains stuck at 84% to 91%

  Battery not charging 100%, remains stuck at 84% to 91%.

  Hi all

  I got my blackberry z10 not too long ago, and initially, the battery was not serious. A full charge is 100%.

  Now, I'm having the problem of not to charge up to 100%. He shows me the icon of "lightning" up to about 84% to 91% where it stops and shows me the '=' sign as in fully charged or not charging.

  I tried to restart the device and even turned off while loading see that fixes the problem or not, but nothing helped.

  Someone here has the same experience? Any help or advice would be greatly appreciated.
  Thank you

  LEAVE it plugged into the wall charger (not USB > PC charger) for half an hour.

  With the charger plugged, remove the battey a minute then reinsert it.

  This will often reset the battery on the device reading to the actual battery charge.

• Battery not charging question

  Hello support,

  I'm on MacBook Pro (13-inch, mid-2012) running El Capitan and I was happy with the battery, the life he gives about 4 hours and you just have to go with, but unfortunately the battery does not charge after life cycle number is reached according to programmed by chip on board and asked for replacing the battery PLEASE provide an update to the battery issue and let the user decide When to replace them, but not the application of it to replace now, this could be resolved if you kindly make the point "the MacBook Pro SMC Firmware Update 1.8" for work on El Capitan.

  Thank you for your understanding

  FWIW, Apple isn't here. This is a user forum. You can send feedback to Apple to...

  http://www.Apple.com/feedback/

• Satellite click Pro P30W-2B - the docking station battery not charging

  Hello

  I have a Satellite click 2 Pro 30WB; at first, I didn't have any problem with this product, but a few months does not charge the battery of the docking station. I am able to load only the Tablet battery.

  Can someone help me?

  Thank you

  Hmm... If this problem has appeared since the first day of the purchase, the home question battery might be related to battery failure.
  In this case, you will need to contact the service to fix.

  But just one question: it's your BIOS up-to-date?
  Check the update in the station of service and if available new version of BIOS; try to update the BIOS to the latest status.

• Satellite P850 32Z: battery not charging

  Recently, I had problems with the battery, which means that I need to plug my AC adapter all the time. The battery in the taskbar icon indicates that the battery is 68% and these last days. Placing the cursor on the icon says "plugged in, not charging", and the battery on the laptop light does not illuminate. If I unplug the AC adapter, the laptop shuts down completely.

  I also tried the cold reset following instructions (from the section "Solving a problem" to support)
  1. power off your laptop and unplug the AC adapter
  2. remove the battery from the PC (for models with semi-fixed battery, please follow these instructions)
  3. press the button power for 30 seconds.
  4. then, plug in the adapter without the battery, turn on your computer and start Windows normally
  5. wait 5 min. and then replace the battery on while your laptop is turned on

  In step 4, when I turned on the laptop, the laptop starts and the battery light is on. But then after a few seconds, the battery light turns off and the laptop turns off.

  Someone had this problem?

  I have the same question. I bought a new battery. It worked for about 1 hour from 67 percent and amounting to 100% and then my laptop just died. Now my old battery indicates 0%, no charge, my new battery says 0%, 8 minutes at full load. So I'm a little confused about this and don't know if it's only a battery error. I'm going to service this week, so I know what the problem. I have the Satellite P850 - 33 m

• Satellite P55W - C5204 Toshiba full RADIUS battery not charging

  Hello world

  Here's the problem...

  I have a toshiba P55w-C5204

  I leave the battery to one afternoon and the closed laptop
  When I tried to plug it in overnight was´t led current dc on (must be on to light red when you connect it and once charged white light, it should be), but the Red battery light indicated that I was using battery as it was the.

  Start the computer laptop no matter how long that I led the cable connected says battery fully charged, but if I unplug the cable dc current laptops matrices.

  I tried different procedures posted as stop disconnect the battery, start... .unistall ACPI driver from Device Manager, close, connect battery; and it doesn´t work.

  I also create a partition in the hard drive and install a new 10 windows and the problem is not changed.
  Help me please, I don't want to lose my Toshiba it works great despite this problem and I have can´t but another.
  Would it be the battery or the center cost (motherboard?)?

  I would like to know that it was a pilot or a bios Setup even a virus haha.

  Thanks to you all.
  Carlos P.

  Hello Carlos! I'm having the same problem. It started today. What is find a solution?

• Satellite Pro P200: battery not charging

  Hello

  My laptop battery will not charge. Just bought two weeks ago. Can I use my laptop for an hour approximately and it is still empty.

  What's not?

  Edwin

  A moment please. you said that the battery won't charge?
  Is this true or do you mean that the laptop can run only one hour on battery?

  Battery is charging while the laptop is connected to the power adapter?

• HP Pavilion 15: Battery not charging

  I have a HP Pavilion 15, who began to do not charge the battery. It flows from the power of thin battery, but the battery is not more. I have to run my computer off the AC charger because I need what is left in the battery to start the computer. I had already tried to go through the system diagnostics. It says that the charger is not detected. I tested it and it is turning off the right amount of power, however.

  This is the charge Jack or the motherboard, I'm sorry to say. Decision-making is not expensive but still a repair difficult. The motherboard is expensive and difficult.

• Tecra 8000 does not recognize the new HARD drive

  I read on this forum and Google search, but nothing helped.

  I think the disk on Tecra 8000 (Pentium II, 266 Mhz) is "dead".
  I tried to replace it with another laptop to see if that would work.

  The laptop does not, even if I put just like the original.
  Y at - it somehow special or what I have to change something in the Bios?

  Hello

  Don t need to change BIOS settings

  As long as you use the compatible HARD disk, the BIOS should recognize the HARD drive automatically without big problems
  What drive did you use? What size, interface, etc.

  The Tecra 8000 is an oldie and I think that you could use only the 4 GB; 6 GB; 9 GB; 10 GB; 14GB IDE hard drives.

  More large hard disks would be not recognized by the BIOS.

• Tecra 8000 does not start after the BIOS update

  From one day to the other does not start my Tecra 8000 (400 MHz/256 MB BIOS 9.30 for years). After start-up, the disc starts to turn, but the screen including the backlight remains completely black, without red logo TOSHIBA BIOS is not accessible.

  I got a new mainboard on stock, so I replaced it, and it worked. Unfortunately now my WLAN card now did not work properly. I tried several settings of the BIOS with no results, so I decided to do an update of the BIOS from 7.50 to 9: 30. After the upgrade, I get the message "ROM WRITE successful, utility completed. LEADER BIOS: Tecra8000 v 9,30 ". Because what either kept silent, I pressed the power button to restart and heard a long and many short beeps (endless). I could interrupt what pressing the powerbutton for 5s.

  After turning on again I have the same problem as described in the first line :-( I can't get into the BIOS, but I can again update (with pressed F12). Once again these beeps.

  What to do with these beeps after average BIOS update? I replaced the MoBo connector LED with pension. Processor, memory, keyboard and HD has remained the same. So, before I start disassembling the machine, please notify, your help is very appreciated.

  Hello Joachim

  I'm not a technician and don t know what the beeps but I am afraid that the BIOS chip is damaged. Because of this, the unit is completely dead. Sorry, but I really don t believe you can do anything. Maybe the new motherboard again :(