Tecra 8000 - failure to CD-ROM - new installation disc?

Similar Questions

• Tecra 8000 product Recovery CD-ROM expired!

  I'm trying to restore two Tecra 8000 computers laptops, but I have the following problem...
  "This pre-release version of Windows has expired. Please contact your dealer for a new version of Microsoft windows 98 "
  No idea if I can get a new drive from Toshiba?

  Hello

  Please contact the SAV Toshiba partner in your country. They can help you and also order original recovery media for your device.

  Good bye

• Tecra 8000 does not recognize the new HARD drive

  I read on this forum and Google search, but nothing helped.

  I think the disk on Tecra 8000 (Pentium II, 266 Mhz) is "dead".
  I tried to replace it with another laptop to see if that would work.

  The laptop does not, even if I put just like the original.
  Y at - it somehow special or what I have to change something in the Bios?

  Hello

  Don t need to change BIOS settings

  As long as you use the compatible HARD disk, the BIOS should recognize the HARD drive automatically without big problems
  What drive did you use? What size, interface, etc.

  The Tecra 8000 is an oldie and I think that you could use only the 4 GB; 6 GB; 9 GB; 10 GB; 14GB IDE hard drives.

  More large hard disks would be not recognized by the BIOS.

• I need a new installation disc

  I need a new installation of Windows Vista Home Premium disk for my computer. Since his arrival, I lost it and need a new. I have a legitimate serial number for Vista, I just need the disk to install it that I don't have.

  (Do not know if I put this in the right place, if not you can move)

  I need a new installation of Windows Vista Home Premium disk for my computer. Since his arrival, I lost it and need a new. I have a legitimate serial number for Vista, I just need the disk to install it that I don't have.

  (Do not know if I put this in the right place, if not you can move)

  Hey jmixmaster

  This article describes how to easily order service packs on CD, replace Microsoft software or hardware, and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  Walter, the time zone traveller

• Tecra 9000 - Download the software for new installation

  Hi there;

  I lost the disc for my Toshiba Tecra 9000 laptop.

  Exactly what software needs to be downloaded to the default configuration for one of these?

  Thank you very much

  Hello

  What 9000 model do you have?

  All the required drivers and utilities are available for download on the web, but if you mean you want to put the machine in its factory condition, you need the recovery disc that came with the machine.

  If you provide the machine part number I can let you know what software has been bundled with it.

  Kind regards

  Nick

• Tecra 8000 sees no PCMCIA network card

  I don't get my Belkin network card Wireless PCMCIA connected to my Tecra 8000.
  That's all new win 2000, including all updates and I don't know that the pcmcia slot is working very well.

  The problem during the installation of this card is that the tecra does not see the network card.
  Does anyone have an idea how to solve this problem. Network adapter is Belkin F5d7010 54 Mb.

  THX

  Guus
  Utrecht

  Try to change some settings in the BIOS.
  In the configuration box, you can set the configuration of device option to all devices.
  In addition, in the area PC card, you can try changing the compatible option CCIP or CardBus / 16-bit.

  Play with these settings and check if a this will allow the card.

  PS: Have you installed all the drivers that should be shipped with this card?

• I lost my installation disc for my printer HP Deskjet 3050 a

  I lost my installer for my printer drive HP Deskjet 3050 a how can I get a replacement

  Hello

  Below you can download the software for free by selecting your OS and download software feature full driver category.

  Follow the category of material command to order a new installation disc.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=5061082&

  Kind regards

  Shlomi

• After the new OS installation my Tecra 8000 runs very slowly

  I did a format and install windows Windows XP sp2 home edition on my Tecra 8000. Now, it is very slow to load the desktop. I missed the relocation of something?
  I don't have the right Windows XP Home edition, System Restore disc.

  Hello wkerns

  It is well known that some laptops and thus determine a drastic loss of performance after installing XP SP 2. Also, check out this http://www.dvhardware.net/article3135.html article.

  I have the same situation with my Satellite P10. Unit need 20 seconds more until I'm able to use the operating system. I put t really know what can be done to make it better. I read that the processor driver should be exchanged with the processor drivers used prior to SP2. I try still didn t.

• New Tecra A4 - 170 - slower than my old Tecra 8000

  Hey!

  Since yesterday, I have my NB again at home and so far, I'm happy with it!

  It has a processor M760, with 2 GHz, 100 GB HDD, FSB 533 and such - but it is slower than my old Tecra 8000 with PII and 366 MHz with only 8 GB of HARD drive.
  Y at - it a tip or something I should fix, or is it quite normal when there is now software for nearly 10 GB (nothing special, just the software more pre-installed desktop, antivirus and internet, no games) on this subject?

  Would be happy to help!

  Meike
  :-)

  HI Meike,

  Your new Tecra running the same OS as your old?

  I would be interested to know if slow is during the initial loading of the operating system or if it appears when you actually use the system.

• New OS for old Tecra 8000

  Hi all

  I just purchased a Qosmio F10 and want to give my old Tecra 8000 (P2 300 Mhz, 8 GB, 192 MB of RAM) to a friend. This computer works fine on Windows 98 1st edition, and I again all the installation diskettes. I would like to reformat the drive to remove my identity and to upgrade the operating system to a version more recent Windows.

  My questions are:
  -What operating system given the low specs?
  -How can I reinstall Toshiba laptop features?
  Thank you in advance.

  Hello

  TOK is quite right. Check on the Toshiba site what operating system is supported for your device as Toshiba specific tools are designed only for the operating system.

• Tecra 8000 - installation of update of the BIOS & XP or ME?

  I got the task of sorting of a s laptop Tecra 8000 a friend who is completely riddled with spyware and viruses. After killing most of the infections I backed up what I have to and decided the best course of action is a reconstruction of the BONE.

  I don't know what operating system to suggest that it installs. Will install and make ME use Win98 drivers or if this is not recommended (I have no experience with ME)?
  XP would be a better choice with its own pilots (reading the posts on here that SP2 causes slowdowns well)?
  Either the OS above with a Bios Update will be necessary? If so the update of the Bios from 9, 30-trad does not require a 500 MHz + processor? The Bios will tell me the CPU speed?
  I found information on how to install the updates to the Bios; I just check that I can install the 9.30 - trad on a Tecra 8000 with a processor more low spec?

  Thank you very much
  JBW

  I installed the trad 9.30 on my tecra 8000 233 mhz without problem. European downloads have the 500 mhz different bios updates voor and lower. The trad version is for lower versions.
  The American downloadsite have only 1 bios, the 9: 30 for all machines.
  It confused me, so I took the trad 9.30 which is safe for all machines under 500 mhz.

  Good luck... not to mention that I installed winxp pro on it and it runs smooth, I only dissabeld a large number of services that run in the background that wheren can't used to free the memory.

  Rick greetings

• IDP_JMS_Bus / engine on the new installation of e-mail failure

  Greetings:

  I'm trying to get a new installation of 8.2 in a WebSphere 6.1 win 2003 / SQL Server clustered environment.

  Currently the IDP_JMS_Bus does not start, and SystemOut messages point to 'No current e-mail of execution engine'.

  I tried to start the engine, without result on several reboots.

  This facility has taken a number of attempts to complete due to errors in installation.

  The first message in SystemOut autour is:

  [12/05/10 10:52:40:359 CDT] 0000003 has SibMessage W [:] CWSIV0775W: creating a connection to destination adobe_PECommandQueue on bus IDP_JMS_Bus for activation of the endpoint [com.ibm.ws.sib.ra.inbound.impl.SibRaStaticDestinationEndpointActivation@39723972 < active = true > < connections = {} > <messageEndpointFactory=com.ibm.ejs.container.MessageEndpointFactoryImpl@9496c24e> < endpointConfiguration = [com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl$ JmsJcaEndp ointConfigurationImpl@1642750442 < JmsJcaActivationSpecImpl.this=[com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl@18 66755908 < = null username > < password = null > < = null xaRecoveryAlias > < destination = queue://adobe_PECommandQueue?deliveryMode=Persistent & busName = IDP_JMS_Bus >]] [[< durableSubscriptionHome = null > < destinationType = javax.jms.Queue > < messageSelector = null > < acknowledgeMode = Auto-reconnaître > < subscriptionDurability unsustainable = > < shareDurableSubscriptions = InCluster > < clientId = null > < subscriptionName = null > < maxBatchSize = 1 > < maxConcurrency = 10 > < busName = IDP_JMS_Bus > < shareDataSourceWithCMP = false > < = null targetTransportChain > < = Default readAhead > < target = null > < targetType = BusMember > < targetSignificance = Preferred > < = null providerEndpoints >] >] > <endpointInvoker = com.ibm.ws.sib.api.jmsra.impl.JmsJcaEndpointInvokerImpl @. [68f268f2> <workManager = com.ibm.ejs.j2c.work.WorkManagerImpl @ 170e170e> < endpointMethodTransactional = true > < remoteConnection = null > < remoteDestination = true > <timer=java.util.Timer@4c0c4c0c>] failed with the exception com.ibm.websphere.sib.exception.SIResourceException: CWSIT0088E: there is currently no messaging engine in the IDP_JMS_Bus bus race. Additional failure information: CWSIT0103E: no messaging engine were found that matched the following parameters: bus = IDP_JMS_Bus, targetGroup = null, targetType = BusMember, targetSignificance = Preferred, transportChain is InboundBasicMessaging, close = Bus...

  Then:

  [12/05/10 10:52:46:266 CDT] 0000003 b SibMessage W [:] CWSIV0775W: creating a Default.Topic.Space destination connection on bus IDP_JMS_Bus for activation of the endpoint [com.ibm.ws.sib.ra.inbound.impl.SibRaStaticDestinationEndpointActivation@12521252 < active = true > < connections = {} > <messageEndpointFactory=com.ibm.ejs.container.MessageEndpointFactoryImpl@7aff2ec6> < endpointConfiguration = [com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl$ JmsJcaEndp ointConfigurationImpl@303436310 < JmsJcaActivationSpecImpl.this=[com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl@16 80368680 < = null username > < password = null > < = null xaRecoveryAlias > < destination = topic://adobe_TaskEventTopic?busName=IDP_JMS_Bus > < = null durableSubscriptionHome >]] [[< destinationType = javax.jms.Topic > < messageSelector = null > < acknowledgeMode = Auto-reconnaître > < subscriptionDurability unsustainable = > < shareDurableSubscriptions = InCluster > < clientId = null > < subscriptionName = null > < maxBatchSize = 1 > < maxConcurrency = 10 > < busName = IDP_JMS_Bus > < shareDataSourceWithCMP = false > < = null targetTransportChain > < = Default readAhead > < target = null > < targetType = BusMember > < targetSignificance = Preferred > < = null providerEndpoints >] >] > <endpointInvoker=com.ibm.ws.sib.api.jmsra.impl.JmsJcaEndpointInvokerImpl@12441244> <= workManager [com.ibm.ejs.j2c.work.WorkManagerImpl@170e170e> < endpointMethodTransactional = false > < remoteConnection = null > < remoteDestination = true > <timer=java.util.Timer@12bc12bc>] failed with the exception com.ibm.websphere.sib.exception.SIResourceException: CWSIT0088E: there is currently no messaging engine in the IDP_JMS_Bus bus race. Additional failure information: CWSIT0103E: no messaging engine were found that matched the following parameters: bus = IDP_JMS_Bus, targetGroup = null, targetType = BusMember, targetSignificance = Preferred, transportChain is InboundBasicMessaging, close = Bus...

  She is followed by many messages of connection creation failure.

  Can someone provide pointers on how to fix this installation?

  I have had advice for the cluster, remove the SIB tables and restart the cluster, but do not try this without a verification it is recommended.

  Thank you in advance!

  Mark

  If this is the case, looks like the messaging engine has trouble getting an exclusive lock on the message store tables in the DB (all start with SIB *):

  http://blogs.Adobe.com/LiveCycle/2007/07/what_are_those_sibtables_in_my.html

  Since it is a new installation, you can drop them safely.  Stop the JMS cluster members, delete all tables SIB, and then restart them.  Watch the SystemOut.log of the members of the cluster for the messages that tell you that the messaging engine has acquired an exclusive lock on the table.  Only one of the members of the group will have this (since the messaging engine is a singleton and can run on one but not both of the JMS cluster members).  If you see this message, check the DB - SIB tables should be recreated, and you won't have this particular problem.

  Essentially, must match the MEUUID in the table SIBOWNER and UUID of the messaging (as determined by the console WAS) engine.

• Portege 2000 - new installation using the PCMCIA CD-ROM XP

  I try to install XP on Portege 2000 using the official PCMCIA Toshiba CD-ROM drive.

  Install the XP disk boots fine, but after that Setup copied the files it blue screen (BSOD blue). I'm not very tech savvy, but I think it means that the BIOS can 'see' the PCMCIA CD-ROM, but that the real image of XP loaded by the installation program cannot, probably due to missing drivers for the PCMCIA CD-ROM?

  Then, I thought that maybe I could use F6 to load additional drivers during the initial installation, but it is beyond me to create the right set of files required. I know that you can download the Freecom drivers, but I don't know what are the driver files from CD to use and how to create from scratch the txtsetup.oem file right.

  Does anyone know how to properly use F6 and load the drivers for it?

  I found a lot of messages suggesting I copy the installer to the HARD disk and launch the installation from there. My problem is that the XP installation is an upgrade CD, so I will ask you at a certain time to insert a previous Windows CD and if at that time there I don't have a working CD-ROM drive...

  First post on this forum so be nice - I did a search but not find a thread with a real solution, but of course if I miss a please report!

  Edited by topic: beneix_1

  Hello

  I managed to install Windows XP Home the Portege 2000 using the PCMCIA reader but I ve used recovery disks original Toshiba which includes the correct driver for external optical drive.

  So far I tried not to install Windows XP Home edition, using the Microsoft installation disc.

  Maybe you should get the disks of facilities and not use this upgrade disk. I think that on this path, you will be able to install WXP as suggested when you copy data from facilities at the disk directly.
  Have you tried to get the original recovery disc Toshiba WXP?

• HARD on my Tecra 8000 P11 drive failure

  Hello

  I hope someone can help,
  I have an old tecra 8000 P11 and the HARD drive failed, I tried re starting from the cd but says disc hard is not recognized or does not. any ideas?
  Can someone point me in the direction of a compatible HARD drive replacement or original.

  Thank you

  Chrisp

  Hello

  This is an older unit and it is not easy to give you accurate information but I found one that can be useful for you. Obviously, Tecra 8000 comes with different HARD drive capacities and the largest is 14FR. I don? t know which one you have now, but you should not use the HARD drive with too much capacity because it won't be recognized without doubt. I recommend you check eBay because there you can buy an and it won't cost much.

• I'd appreciate it really any assitance on this, I can't save my favorites due to a failure of the system. I can access the drive crashed trhe data. Do my resident Favorites in a file that I can copy and then replace in a new installation, if so, where is

  Windows broke down and I need to reinstall Vista. So I can make a backup of my favorites, but I guess that there is a file somewhere on my crashed disk that bears this detail. If so, can I copy this file and replace in my new installation of firefox. If this file exists, I would like to know the name of the file that I need to copy and that I could find it in the directory.

  The anonymous gives path is for Vista not XP.

  The "places.sqlite" file is the file that contains your bookmarks and history. It is located in your profile folder.

  See:
  http://support.Mozilla.com/en-us/KB/profiles#How_to_find_your_profile
  Display the hidden files and folders

  In XP, the path is usually:
  C:\Documents and Settings\UserName\Application Data\Mozilla\Firefox\Profiles\xxxxxxxx.default
  ("xxxxxxxx" is a unique alphanumeric identifier)

  When you copy data from your OLD profile to your NEW profile, copy individual FILES (some require more than 1 FILE). DO NOT copy the entire OLD PROFILE folder; It will not work.

  See: recovery of data from an old profile

  Other topics: ~ ~ Red: you have installed the plug-ins with known security issues. You must update them immediately. ~ ~

  Java Update: version 1.4.2 (~ ~ Red: very old ~ ~); current version 1.6.0.20 (important update 15/04/2010)
  (Firefox 3.6 and above requires Java 1.6.0.10 and above; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
  (Windows users: do the update manually, very easy.)
  Check your version here: http://www.mozilla.com/en-US/plugincheck/
  See: Java Update
  Do the update with Firefox closed.

  Install/update Adobe Flash Player for Firefox: your version 10.0 r45; current version 10.1 r53 (Security important update 2010-06-10)
  Check your version here: http://www.mozilla.com/en-US/plugincheck/
  See: Flash update
  -use Firefox to download and SAVE to your hard drive (save to the desktop for easy access)
  -the release of Firefox (file > exit)
  -Make sure that Firefox is completely closed (Ctrl + Alt + Delete, choose Task Manager, click the processes tab, if "firefox.exe" is on the list, made a "firefox.exe" right-click and choose end process, close the Task Manager window)
  -Double-click the Adobe Flash Installer, you just download to install/update Adobe Flash
  -When Flash is installed, start Firefox and test the installation of Flash here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507 & sliceId = 1

  • NOTE: under Vista and Windows 7 you may need to run the installer of plugin as an administrator by starting the installation program via the context menu if you do not get a UAC ask permission to continue (that is, nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
  • NOTE for IE: Firefox and most other browsers use a Plugin. IE uses ActiveX of Flash version. To install/update IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash Setup.
  • See also: http://kb.mozillazine.org/Flash ~ ~ Red:AND~ ~ How to change options to add Adobe to the list of allowed sites