Tecra 8000 product Recovery CD-ROM expired!

Similar Questions

• How to use product recovery CD-rom?

  How to use product recovery cd-rom on the satellite A40 range?

  Hi Daniel,.

  To use the recovery CD, simply insert the first CD (assuming there are two) in the CD drive and then just turn on your laptop while pressing the 'C' key on the keyboard. This will cause the laptop to load a minimal operating system on the CD that will start the process of recovery of the product.

  You should also be an initial menu that asks you if you want to do a complete system restore or restore 'Expert'. The full restore will delete all of your 'C' drive and will then install the entire system (excluding all the extras you'll have to install afterwards). The recovery of 'Expert' will allow you to partition your hard drive before you install the operating system in the C"" drive.

  Kind regards

• Equium A60-173: need product Recovery DVD-Rom

  Hey guys, I was wondering where I can buy a product recovery dvd - rom for my laptop and if there is an online shop can you please provide a url?

  Thanks in advance.

  Hello

  The only place where you can order the original Toshiba Recovery DVD is authorized service partner. Please check this page http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Good bye

• Tecra 8000 - failure to CD-ROM - new installation disc?

  The CD-ROM drive in my Tecra 8000 has a defect. It attempts to load a CD-ROM, LED is flashing, it stops, and then the drive LED is lit.
  So I guess the drive is down.

  What kind of new CD-ROM is suitable for this laptop? Toshiba only original ones?

  Hello

  Wow, the Tecra 8000 series is really old. Do you use yet this laptop?
  It feels like the notebook would come from the stone age ;)

  However, I think that the CD/DVD drive supports * interface IDE but not all readers would be compatible due to master/slave/cable select settings

  It seems that the reader of DVD-ROM + Toshiba - SD-C2002 + would be compatible.
  Not sure if you'll be able to get this disc because of the age of the unit, but probably the authorized Toshiba maintainer in your country could provide some readers compatible optical disc

• Can I use product Recovery DVD-ROM from the other unit for my Tecra A2?

  My A2 Tectra is so damaged that I want to back to whn he bought. I can't find the DVD_ROM of recovery of product that comes with it. But I got the Toshiba A60 product DVD_ROM recovery.
  They are all the same or do I have the exact DVD_ROM to A2 TECTRA?

  Hello

  The answer is no. each recovery image is created separately, and contains drivers for specific hardware infrastructure. Best way is to use the facilities of Microsoft CD and install all the drivers, tools and utilities only later. All these things you can find on the download page of Toshiba.

• Portege M400 Tablet product Recovery DVD-ROM

  Where can I get a set of recovery discs to DVD-ROM for my Portege M400 Tablet products please?

  Hello

  Usually, you can order the recovery disk using this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  But this page provides a recovery only for the most recent disk series laptop.
  I'm not very well if you'll be able to order the recovery disk because of the age of the M400 m

  Anyway, the other possibility would be the ASP. You can contact your authorized service partner and could ask this disc

  In the worst case, you can use a clean Windows disc and Toshiba drivers are downloadable from the page of the driver.

• Satellite P20-842: Question about product Recovery DVD-ROM

  I have a portable satellite P20 842.
  I received a DVD of recovery of product with it (2 DVDs)
  I would like to format the hard drive!
  When I try to use the DVD, I get a message "starting windows 98"
  some 900ish files copied and then NOTHING! I restarted and I get a message from stiarting windows XP...
  My questions
  (1) how to use the DVD to format the hard drive!
  (2) when I bought this laptop, it had windows XP preinstalled... so where windows 98 come into picture?

  I need to format my disk ASAP as my comp hangs...
  I need HELP! AS SOON AS POSSIBLE!

  Hello

  Don t be afraid. Everything is ok.
  The restore CD contains the ghost image files and it uses the files Windows 98 MS system to boot from the CD.
  It is usual that the Win98 message during initialization.
  In addition, the recovery CD formats and automatically remove the HARD drive.
  You have only to boot from this CD and you select standard mode.

  In this case the recovery CD is completely erase the HARD drive.

• Tecra S1: Step by step how to reformat HARD drive by using the product recovery CD

  OK guys, I'm about to return my lease (Toshiba Tecra S1); because the video card is 'us' and I would like to reformat the drive and return the system to its original state by using the "product recovery cd-rom provided Toshiba."

  My problem is that the video card is on the right track and using windows is a challenge quite like its like watching a patchwork blanket. So, when you try to use the recovery of product cd-rom, I can just not read the screen "its comparable to the matrix.

  I really need a tutorial step by step with screenshots at each step 'a map of the fool '. Can anyone help.

  Thanks in advance,
  Robsta

  Hello Robsta

  Believe you did not need the step by step tutorials or shoots screen. The recovery procedure is very simply.

  Put the recovery CD in the CD/DVD drive
  Turn on the laptop and keep C button for a few seconds
  Follow the menu on the screen
  Choose option 1 for installation in Standard mode and just follow what is happening on the screen

  All that s!

• Satellite A30 product recovery CD

  I need to restore the HD of Satellite A30 of my boy.
  He gave me that one DVD 'product Recovery DVD-ROM'
  He is also says "2/2", which I suppose that it is disk 2 of 2.

  This DVD is not bootable. so I guess there could be a disk of 1/2 which is bootable and contains the basic recovery program.

  My question: am reason above supported and if yes, where can we get the first DVD, since my boy seems to have lost it.

  Thanks for any help.

  Peter

  Hello

  You are right! There must be a n ° 1/2 recovery DVDs!

  If you (or your son) have lost it, you can order a new one for every Service Toshiba partner. You only have to sign a solemn declaration for MS that you have lost the CD!

  To http://eu.computers.toshiba-europe.com when you go to the support & downloads you will find a list of partners of Service Toshiba!

  Tanya Bye

• Satellite A80 - problem of product recovery

  Hello world!

  I have my Satellite A80-144 for almost 4 years now, but now my baby seems to be not more happy and were on strike. I have used my product recovery DVD-rom in the hope of bringing back the good old days No go!

  What are the lost areas warning or error partitions defined and all that blah, blah, blah, which doesn't help me a lot without YOUR professional opinion.

  Following all the instructions on the screen during the recovery procedure did not help. What should do? The hard drive is formatted now, but it does not start. Always a mistake.

  Help, please! Thank you very much!

  Hello

  > What are the lost areas warning or error partitions defined and all that blah, blah, blah,.
  According to the statement, a HARD disk failure is possible.
  You receive a message about lost areas and damaged partitions and in my opinion, this is displayed because the HARD drive is not ok.
  If you can try to format the HARD drive, but that won't help I recommend to replace the HARD drive

  Welcome them

• Tecra M9 does not react to the product recovery CD

  I love my Tecra M9. Fast, reliable and effective. I added an extra MB of ram when it is brand new or have added no extra charges.

  But its been slow in place, as they do. I had one or two freezes, especially when the plug to the modem is removed, and I deleted somehow Tosh power system in the power options menu.

  I thought that it time to re - install the XP.

  I tried the fix on f8 when booting, but it just comes back by selecting XP.
  (I don't have the menu to fix your computer)

  So I backed up the entire hard drive.

  I have just a product recovery disc. Put in, turned off, kept pressed f12, active and got the screen re - format.

  BUT when the choice of the re - format it does not show the partitions, as it suggests it should. I select default XP and wait for it to go but then get error codes and later, a pc dead.

  ERROR:10CTL_DISK_GET_LENGTH_INFO\\.\PHYSICALDRIVE0

  Then comes

  DRIVE HARD #0 IS NOT ACCESSIBLE OR BAD RAID CONFIGURATION

  Then

  ERROR: COULD NOT GET DISK PHYSICS IOCTL_DISK_GET_DRIVE_GEOMETRY

  I know that one of my sins does not create a bootdisk on a memory stick. I have only just read about it, I thought the CD was a startup disc but apparently not. Yes, I am ignorant.

  The thing has an extended warranty, so I thought I'd return it to Tosh. But then again, this is probably not a big problem that needs to return it?

  My apologies if I was a fool to the month, but help is appreciated, thanks.

  Mish

  Hello

  It looks like something wrong with a recovery disk. You can try to install Windows using Winows copy disc?
  If you did not, try to get one or download.

• Tecra 8000: update of the Bios allows booting from USB?

  Hello

  I have Toshiba Tecra 8000 (simple 266 MHZ)
  Will be this bios bios-t8000-930 - trad.zip (08/26/02) allow you to boot from USB?

  Hello

  As far as I know, you need a supported drive to boot from external USB drive.
  The update of the Bios won't boot options.
  If you want you can ask for the readers supported ASP.
  I found this site one:
  http://www.CCD.co.UK/Xpress/catalogue/product.asp?PN=JD0000283

  It s a Toshiba CD - RW / DVD-ROM combo wit reader PC Card interface.

• Product recovery CD's install German WXP

  PRODUCT RECOVERY CD INSTALL GERMAN WINDOWS XP.
  I can't change Windows XP to British English.
  My Tecra 9100 was purchased from the United Kingdom and is the UK version PT910E-5XPZF-EN.
  I then installed XP from a different CD and it was evenly divided HD in C & D drives with the German version on C and D on UK version.

  H-E-L-P please!

  Hi Vic

  Just no panic please. I hope that we can find a solution to your problem. First of all, I want to know how you want to configure the laptop exactly.

  It will also be interesting to know if this different CD was German-speaking and if it is a full installation of Microsoft CD and NOT the restore CD.

• Tecra 8000 - how to connect the HARD drive to another laptop?

  Hello, what kind of camera do I need to connect an old hard drive Tecra 8000 to a laptop from another production?

  I want to just transfer some data, but the connector on the Tecra ac no longer works.

  Hello!

  You can use a drive enclosure external DRIVE with USB port for this.
  The external HARD disk enclosure should be for 2.5 s HDD with IDE interface. All that s.

  Contact your local computer dealer. I'm sure they will have these cases.

  Good bye

• Update the Bios on Tecra 8000

  Hello

  I'm updating of the bios in my tecra 8000 successful.

  "Finished WRITING successful ROM utility. LEADER BIOS: Tecra8000 v 9,30 "

  I can't turn on my laptop (press POWER), but the display is black and tecra does not not :(((

  When I find the old version of the Bios

  I have a PII 266 Mhz

  Help me :(

  Post edited by: adi83ek

  Have you tried to get into the BIOS?
  Check it out.
  But usually after the update laptop BIOS should properly work and boots.
  Have you followed the instructions on the BIOS update on the page of Toshiba?
  Maybe you did something wrong and the motherboard is damaged.