Tecra 8100 memory module questions

Similar Questions

• Tecra 8100: memory slot problems

  I have a model tecra 8100 not: PT810L 12 c 42.

  I had problem with slot B mem, so collapsed to use it. Then I upgraded my RAM and inserted a 128 Mb TOSHIBA THLY6416G1FG-80 RAM PC100-222-620 slot A and used for a month. Then he suddenly went dead one day and did not boot at all.

  I took it to the point of service, they found somehow it work by sticking a piece of paper btw Aries and the cover. I used another week with ram cover duck taped it. Same story, then dead in the middle of winXP, switched off and no boot again. It took to the same service point, they tried some other RAM chipsets that it refused to start.

  The interesting thing is; When they inserted a faulty RAM in slot A and non-use slot B we get the message "memory incompatible chipset" on the screen. With the RAM mentioned above in the slot B (problem as always) and the A we get nothing, just a blank screen, DVD slot starts green lit, but nothing.

  WHAT SHOULD I DO, PLS HELP

  What is the RAM causing problems? What must a chipset that is exactly compatible with the model no pls?
  Is it the two locations of memory A or B, their change could solve the problem?

  This is the machine he itself, must it be thrown away?

  ANY SUGGESTIONS PLEASE

  Hello

  I n know where you tried to upgrade the memory but as Lisa suggested this was not a serious technician. I changed and upgraded memory on multiple PCs, and you must use 100% compatible modules! You shouldn't t install the modules with a brute force or use strange things as a communication between the housing and the memory module.
  Possible slots are damage due to use this procedure. But I hope you're a lucky man and everything will work correctly.

  If you n t know which modules are right and taken in charge so you should contact the service partner authorized Toshiba for the right and the upgrade modules.

  Good luck

• Tecra M7 memory upgrade question

  Hello everyone, I would like to upgrade the RAM on my Tecra M7, which came with 1 GB and is supposed to get a free site available. Since the system's maximum memory is 4 GB, I guess you can use up to 2GB stick into each slot.

  My question is: can I have a 1 + 2 GB configuration (with / 3GB in total) or modules should be combined for better performance (1 + 1 GB) DDR2? I read somewhere something memory dual channel working only with identical memory modules, but I'm not an expert so I don't know?

  Any idea anyone?
  RADO

  Of course, you can mix the sizes of memory. It s nothing unusual!
  You can use different memory module sizes, but you should be 100% sure that both modules supports the same specifications as DDR2 533 MHz (PC2-4200)

• Tecra A5: Memory upgrade Question

  My Tecra A5 has 256 MB installed.
  I understand that this can be upgraded to 2 GB. I bought two 512 MB modules, but under the memory cover between it seems to only be space to install a plug-in. Y at - it might be an another available socket to use somewhere. I would appreciate a guide idiots please as looks that I totally wrong the process to upgrade the memory on my laptop.

  Concerning

  David

  Hi David

  Second location of memory, that you can find under the keyboard. Keyboard is fixed with two screws and you can find them under the cover of the band. If you want to do it alone, please take it easy because you can damage the sensitive plastic piece.

  Good bye

• Tecra 720cdt: memory upgrade question

  I'm looking for 1 oiece 128 MB of memory (MAX)? for my 720cdt. Can someone help me as to a place that I can get this or does anyone have good used sweater, that they no longer need.
  Just tell me what you need.

  Thank you

  Garth

  Wow, that's a really an oldie.
  To my knowledge it s about 10 years.
  What do you what to do on this old notebook?

  In any case, I remember that the slot of memory could be at the bottom of the unit.
  Am I wrong? In addition, you can use module max memory 128 MB and the memory can be upgraded to 144 MB. Why? Because as far as I know that this unit should have internal 16 MB memory and it cannot be removed.

  I searched a bit on the net and found information that this module memory must be compatible:
  PA2046U 128 MB

  These modules you should be able to order the Toshiba service partner in your country.

• Question about the Bios Tecra 8100 2.5

  Hello
  I installed the latest version of the Bios on my tecra 8100. My Question is, what is the maximum size of hard drive for these phones? Now I have 13 GB hard drive, but I want to have a bigger. And 512 MB of Ram is the maximum, right (2x256mb)? Can I adjust the size of the videoram?

  In my view, the tecra 8100 is a laptop very well.

  Greetings,
  Stephan

  Hi Stephan

  You are absolutely right. 512 MB of RAM is max for this pretty portable. If you want to buy more RAM I will suggest you that a PC100 256 MB (PA3051U-1NME). This RAM is tested and working properly with your device.

  Sorry, but video RAM is not possible to extend. And now something on the HARD drive. Unfortunately there is no documents where you can find information like this, but I know very well that here should not be a problem with 30 or 40 GB of HARD drive.

  I wish you lots of fun with this laptop old but nice.

• Tecra 8100 seeing all installed memory

  I'm working on a Tecra 8100 laptop for a friend. Machine does not seem to recognize the memory installed in location B at all. Is there something in the BIOS to force her to perform a new analysis or I'm just looking at a broken slot? Everything seems OK visually and clips seem sound.

  I agree with Feliks;
  Module of RAM or housing could be faulty.
  You should try the RAM module in A slot in order to check the functionality.
  If the same RAM would work in the slot, but not in the B slot then I guess the slot B is damage.

• Tecra 8100 - slot memory B do not work

  Hello

  I recently bought a Tecra 8100 and I decided to upgrade the ram from 128 to 512.
  I did not buy good modules, but in any case, when I opened the laptop, I discovered that I had 2 modules of 128 MB...
  I did some tests:
  -1 module in the slot, he was allowed (128 detected)
  -1 module on the slot B, nothing happened, the laptop won't start...
  -switch modules, always 128 detected
  That's why I think that my slot B is dead...
  Someone has any idea what I can do?
  Maybe a bios update will do... I have yet to try this...
  Furthermore, what is the combination of keys to access the bios?

  Hello

  There is not much to do if the slot B is defective. If you don? t want to repair you can use the module in slot A memory of 256 MB. The number of compatible 256 MB module is PA3051U-1NME.

  BIOS settings, which you can open by using the ESC key.

  Good bye

• Tecra R10 - how to remove the memory module?

  Hello!

  How to remove the memory module?

  Get the following message and for me, it means that one of the modules is broken:

  Out of memory error
  Address = H 00034000
  Read Date = H 28034000
  Write data = H 00034000

  For my opinion, the computer should start up again when I remove the memory broken slice?

  The Australia has soon

  Hello

  You can easily remove the memory modules.
  I think that the Bay is placed at the bottom of the unit.
  Remove the screw that is blocking the Bay, and you will have access to the module.

  Here is a video of how do this on another Satellite L500 laptop. But the procedure is not very different on Tecra R10
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=81

  I hope this helps a little

• Question about CPU on Tecra 8100

  Hello.

  I think I bought the toshiba tecra 8100 on summer (when I had the money), but I have question. What is this laptop processor?
  I read it as 600 mhz, 700 mhz, 800 mhz and 850 mhz, but what really are? Or it's possible overclock via the bios etc?

  Hello

  I Don t understand the question is what a laptop processor. It s the thing that makes your 'computer' computer or think. No matter what.
  The speed is set in Mhz, so it depends on the model how Mhz, the processor of your machine has.

  The exact clock speed is written on the label on the bottom of your machine. You can also try CPU - Z to determine the exact speed of your processor.

  And NO, not possible to overclock the CPU of machines it s.

  Welcome them

• How do I reinstall the ACPI Modules for W2k on Tecra 8100

  I need some information on how to reinstall the Modules ACPI for Windows 2000 on my Tecra 8100. I get a message indicating that "there is missing files to use Toshiba Selectbay Service getting started. Please re - install for Windows 2000 "Toshiba ACPI Modules.

  Anyone know what this means?
  It started to happen after I tried to install the update 'Value-added logical device' on the Toshiba site.
  I suspect it was probably already on the computer, that's why the installation failed.

  Any thoughts would be much appreciated.

  Hello

  I found the description of this file.
  The value logical device is Toshiba ACPI common modules for Windows 2000 support.
  This software is the Foundation for other utilities provided by Toshiba Win2k and must be installed first!

  I put t know not in what order you have installed the driver but this ACPI support Toshiba common modules must be installed at the beginning!

• Question about connector Bluetooth internal on Tecra 8100?

  Hi all.
  I have a laptop of 52 - sp pt810e - 13 c. Updated to 512 MB by using 2 toshiba 256 MB pc100 modules purchased on ebay, upgrade to a PIII 850 also obtained in a ebay and upgraded to a larger 40 GB wdc wd400e hard drive, with a lot less noise than 12 GB the original.

  Play with my computer, I found an internal connector "bluetooth" next to the inside which belongs to the keyboard.

  Why is this? Are there any new Bluetooth module for Toshiba Tecra 8100?

  Hello

  I guess that this connector is placed on the motherboard, because it is possible to upgrade the Tecra 8100 with an internal Bluetooth module.
  I don t find Bluetooth modules compatible but all supported and compatible parts, you can order from the Toshiba service partner in your country.

• Tecra 8200 does not start with the new memory module

  Hi, ive just rode this memory to my willingness to .it tecra 8200 not initialize the message comes up / remove the incompatible memory in B / someone knows why?

  Memory for laptop IBM 256 MB PC100 144 pin SDRAM SODIMM

  IBM FRU L 33, 3070, 256 MB PC100, SDRAM SODIMM, no parity, 3.3 volts, 144 pins, 32 MB x 64

  Thanks for the replies biff

  Hello

  Well, I really put t know why this message occurs. It seems that this module must be compatible with your device. Are you sure that the module has no fault?
  Have you tried to use this memory module in Bank?

  Otherwise I found other compatible memory modules.

  PC100 256 MB (PA3069U - 1 M 25)
  PC100 128 MB (PA3005U)
  PC100 64 MB (PA3004U)

  http://www.frontline.co.UK/product_detail.aspx?pid=MEMKNG5662

  Good bye

• Question of memory module - Qosmio F10

  Half of the year there, I changed the motherboard of Qosmio f10 PCB p000415760 to p000454980 (F10) of PCBs.
  When I get back any computer laptop I had a "RECORD OF INFORMATION TOSHIBA" who is after point 2:
  2 confirm the compatibility of the memory modules
  one. Some problems have been found with combination of the chipset Intel 915 PM EXPRESS and some memory modules.
  So you have to check what type of expansion memory is installed in the customer unit.
  b. Exchange an incompatible module with a PC 2700 DDR SODIMM (333 MHz) for module Alviso.

  This means that I have to change the memory module that was on the old Alviso module 855 chipsets?
  If so what type of memory should I get? Buy DDR2 for this motherboard?

  Thanks in advance

  Hello

  With your questions

  Half of the year there, I changed the motherboard of Qosmio f10 PCB p000415760 to p000454980 (F10) of PCBs.
  It's the card used for the Qosmio F15 AV201 model we. TOSHIBA motherboard (special), A5A001749010 (PM0025960010).

  > Means that I have to change the memory module that was on the old Alviso module 855 chipsets?
  No, if you use the module in memory of the former Intel 855 chipset to the new Intel 915 and try no problems, there is no need to change.
  When he says PC 2700 DDR SODIMM, this means that the type of memory to use. In this case, with a frequency of 333 MHZ, taken in charge by the 915 chipset. The brand is your choice.

  > If yes what type of memory should I get?
  The most often used with the Intel 915 are the Infineon PC 2700 DDR SODIM, but Samsung memory modules work fine, too.
  The best are the Corsair and Kingston (512 MB and 1 GB) and the most expensive modules.

  > Buy DDR2 for this motherboard?
  No, you cannot use the DDR2 modules with your motherboard F10. They are different fisically and performance at different frequencies, too.

  Francisco

• Tecra 8100: Question on the temperature of the processor and speed

  advice please, I installed a p3 900 processor in my tecra 8100 and he sees it only as a 700. Since the Bios was outdated, I downloaded the latest bios which had no effect on its speed. However, as the update of the bios fan never happens that maybe a coincidence?

  Can any body advise me the temp for the processor and the motherboard. My diagnostic software shows 55(c) of the motherboard and 43 for cpu, no fan activity at all. The original processor speed was 600 and I expect the 900 full because I think this is a 100 mhz bus.

  Any help or comment gladly received thanks.

  Hello Peter

  I'm not an expert, but maybe don windows to see the t the correct CPU speed. I recommend you to use a tool (clock THG) which indicates the speed of the processor.