Tecra 8100 only start in safe mode

Similar Questions

• Re: Toshiba L305 Satellite 1) screen is messed up and only start in safe mode

  * HELP! *

  Windows starts only in safe mode or safe mode with network. My screen is messed up (black and gray with horizontal lines and the screen looks like it scrolls continuously).

  I connected the laptop to an external monitor and it still does not start normally and I need to recover contacts from my iphone from itunes.

  Is there something I can do? I really don't want to lose all my contacts! I have to remove the hard drive and it burst in another machine and try to start windows normally to have access to my current drive with all the data that is on it, but I don't know if it works or if it's a bad idea.

  What could be causing the screen get all dirtied upwards and at the same time windows does not start normally? I have never had a virus before problems!

  Help! Thanks :)

  Hello

  > Windows will only start in safe mode or safe mode with networking

  It seems that the bootmanger is corrupt or something like this

  > I really don't want to lose all my contacts!

  I know, I Safe mode, you have access to all data on the hard drive. So, you can move all the important data on USB or on the partition (if available) 2 nd on your hard drive and you don't need to remove the hard drive
  Then you can reinstall Windows with a recovery disc or by using the disk copy of Win. This is the best solution in your case, try to fix windows can take a lot of time as a new installation.

• Computer hangs, reboot, can only start in safe mode

  Original title:-i can only start in safe mode

  Ive tried to use several restore points but when I try to reboot the computer freezes and I have to start in safe mode

  Safe mode is a mode where Windows works only the bare minimum programs and processes necessary to the performance of your system.  When you start in Normal mode, many more processes and applications running.  At least one of these programs or process causes your computer to crash.  If your task is to identify this program/process and, at least temporarily, to prevent it from running at startup.  Microsoft has a tool that you can use to selectively disable or or the process that normally run at startup called "msconfig".  It can be a long and exhausting iterative process of turning things off and restart to see if it you fixed program, but that's what you do:

  "How to solve configuration errors by using the System Configuration utility in Windows XP"

  <>http://support.Microsoft.com/kb/310560/en-us >

  First, disable all items "start-up".  If it does not, set it to 'Services '.  If this does not work, then reactivate some of them and try again until you zero - in on the culprit.

  HTH,

  JW

• I have windows xp after the installation of service pack 3 I can only start in safe mode

  I have windows XP after the installation of service pack 3 I can only start in safe mode?

  Hello

  ·         You get the error message?

  ·         What happens when you try to start in normal mode?

  Method 1

  Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.

  This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:

  (a) minimal (b) network (c) safeboot: minimal (alternateshell) For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems RESOLUTION (a) click Start, run and type MSCONFIG (b) click the Boot.ini tab (c) If you have a dual-boot system, select the entry that is appropriate under the [operating systems] (d) in section downstairs, Startup Options uncheck / hisFEBOOT (e) click OK (f) restart Windows The entry/SafeBoot are removed from the Boot.ini file.

  Method 2:

  If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.

  Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

• XP will only start in safe mode after service pk 3 install, mdule Eventvwr say service command failed

  After a clean install of windows xp family, with nothing but Pctools virus installed and disabled, Xp will only start in safe mode, all 3 choices, it does not start in Msconfig service diagnosis either. Eventvwr said service control module has failed. I tried to uncheck that service figure, but he said that the computer will not start if it is disabled. I uninstalled 3 times and reinstalled with the same results. A last one being a service pk 3 that I downloaded and installed in safe mode.

  It has been installed and working before the clean install of windows with pk3. I removed the patration from the hard drive, write 000 to the dick and reformatted before clean install of xp. It will work with service pk 2 is installed.

  I checked the forums and he Goggled and could not find a solution

  any help will be appreciated

  E-mail address is removed from the privacy *.

  Boris

  You must install SP3 before you install your antivirus program. This can be done safely by downloading the file in advance and install while physically disconnected from the Internet. In addition, you should keep IE at the level before installing SP3 IE6.

  Link to the standalone SP3 Installer file:

  http://www.Microsoft.com/download/en/details.aspx?ID=24

• computer will only start in safe mode, always samekh in normal mode

  Original title: help

  computer will only start in safe mode, always samekh in normal mode.any ideas?

  Hello

  do this work in Mode safe mode with networking:

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• XP SP3 update causes computer to only start in safe mode

  My daughter had XP IE8 running on his computer, site update Windows XP SP3 download.  I downloaded and installed, however it won't start in safe mode. When I remove SP3, the computer loads normally.  I then uninstalled IE8 (went back to IE6), made sure I had the pre-requistes, followed the steps as outline on the microsoft site, downloaded SP3 again and installed.  It will only re-start in safe mode.  I tried everything, no matter what I do, XP SP3 causes the computer to restart in safe mode only. I'm totally frustrated. Can someone help me?

  What is the origin of XP SP3 only start in SafeMode anfter installation? What can I do to fix this?

  Continuous restarts or can only to Safe Mode boot after installing WinXP SP3?

  See: http://msinfluentials.com/blogs/jesper/archive/2008/05/08/does-your-amd-based-computer-boot-after-installing-xp-sp3.aspx

  [NB: the above has been updated several times and now includes "a small tool that allows to detect the problem IntelPPM and mitigate before installing (WinXP SP3)".]

  Possible workaround: boot safe mode and rename INTELPMM. SYS to INTELPMM. OLD.

  Other references include:

  • Error after you upgrade a computer that uses one processor other than a processor of Intel for Windows XP Service Pack 2 or Service Pack 3 for Windows XP: "STOP: 0x0000007E"
    http://support.Microsoft.com/kb/953356
  • HP and Compaq Desktop PC: restart the computer after the display of the Stop error 0x0000007E after installing WinXP SP3]
    http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01457284

• start-up after norton install fails can only start in safe mode

  I don't know how this problem started, I got a blue screen on startup, start single icould my pc in safe mode.

  The only way I could use my pc was to do a system restore.

  At this point, I have lost Norton 360 v 3?

  I contacted norton and they have been very helpful, they re-installed norton remotely.

  they are just me to reboot my pc

  My pc is restarted, I got the blue screen and could only restart in safe mode, I had to again, restore the system to get online and I lost norton, but the Startup icons are still there.

  The problem may be caused by the incompatible Norton (Symantec) with the hardware or software you installed recently.

  Uninstall Norton (Symantec) in Mode completely safe
  

  ==========================================

  1. reboot the computer and start pressing the F8 on the keyboard key. On a computer that is configured to start to multiple operating systems, please press the F8 key when you see the boot menu.

  2. when the Windows Advanced Options menu appears, select Safe Mode, and then press ENTER.

  3 log on to Windows by using the administrator account or any user account with administrator privileges.

  To uninstall Norton Internet Security, please run Norton Removal Tool.

  Note: If the following tool cannot be downloaded via Safe Mode, I suggest we first download it on a different computer and then copy it to the problematic original computer to install it.

  4. Please visit the following Web site to download the tool:

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  5. save the tool for Windows Vista desktop.

  6. run the tool according to the instructions on the Web site.

  7 restart the computer

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• SP3 update: problems, can only start in safe mode

  Windows XP Home Edition: update to SP3, in the hope that it would, among other things, allow me to install the windows update service. Unfortunately, I can only boot in safe mode. If I try the normal startup, it goes into a boot loop. By that I mean that he tries to startup that fails, she tries again, then fails and just keep the loop. All of the answers.
  The only way I see is to uninstall, and which may not be the right answer.

  Hi, Harvey,.

  Try the solution given by DenyB:

  "Installation disk to boot into the Windows XP Recovery console. He asks which disk you want to access and the Admin password (if you do not have a fair shot of password to enter). "Then type: COPY C:\WINDOWS\SERVICEPACKFILES\i386\gdi32.dll (1 place) C:\WINDOWS\SYSTEM32\gdi32.dll press enter crush Y (Yes) press enter type EXIT reboot should Do It."

• Re: Satellite P300 - 19 p - can only start in safe mode

  I started up my laptop recently and there is no noise when Vista starts loading and then Vista crashes while loading. Now I can run only my laptop is safe mode.

  The sound card will not affect Vista, and can do something if the sound card is faulty?

  Hello!

  As Luke has already said if an earlier work of t restore point doesn't use HARD drive recovery.

  If you don't know how to use it, you should read this article:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  Good bye

• Error starting XP - can only start in safe mode

  I have XP with Service Pack 3.  When starting, I get the following message:

  ("We apologize for the inconvenience, but Windows did not start successfully" it gives then five options: 1) start windows normally. (2) safe mode; (3) safe mode with networking; (4) safe mode with command prompt; and (5) last known good configuration.

  The only option that works is safe mode.

  Safe mode, I made several attempts to restore the system, without success.

  I ran SuperAntiSpyware and Malwarebytes Antimalware, find no malware.  However, my antivirus program cannot perform a scan.

  I have no connection to the internet.

  Any suggestions would be greatly appreciated!

  Well done.

  The savrt.sys file is a driver belonging to Symantec.  I think it stands for Symantec Anti Virus Run Time (good guesser).

  It could be that you got some update that did not work completely or is not compatible with anything else on your system.  I spend too much time trying to understand it, I uninstall, download going again and then reinstall the latest version.  Maybe your cleaning program clean up too much or not enough.  What happened, you know what at least part of the problem is now you can work on fixing it.

  You can see if you can get help from Symantec, but sometimes they tell you that your only solution is to resinstall XP or let them connect remotely to your system and run their tools and perhaps their 'Eraser '.  I've never seen a happy ending with these approaches, but you could see what they have to say.  They may not know immediately and exactly what to do.

  If you paid for the Service, he came sinstalled or you got by your Internet provider, I would uninstall it making sure to use the Symantec unintaller who is here:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

  The tool is an executable, so you may need to copy to your Internet system not using a USB key... or maybe someone else has other ideas.  I have not used all of the Symantec products in a long time.

  You can click on start, run and enter in the box:

  Msconfig

  Click OK to enter msconfig and see if you can locate all Symantec, NAV stuff in the tabs XP Services and startup and disable the (this does not uninstall anything) and see if you can boot normally and go online to download the tool.  I have just do one thing at a time and restart until you can start normally (sorry for the trial and error).  Make notes of what you turn off when you turn off something that is no better off so you can put it back.  Do not disable the just what you see in msconfig if you don't know what it is or is not obvious (look for the stuff Service or SYM).  I only remember that the savrt would be in the Services tab.

  This also explains why you can boot mode safe too - Symantec stuff will not be loaded in Mode without failure.  Symantec/Norton is part of the affection.

  Perhaps using Add/Remove programs to remove Symantec will work enough for you will get, but the Symantec tool must be run at a time to clean up the damage.  It must be a bit messy, since they had to come out with their own removal program (but a lot of antivirus provider it nowadays).  I do not like the installation of their products to see how it works these days.

  I would like to use msconfig to disable as much as you can find a little at a time, then see if you can boot normally and get on the Internet.

  Of you can just hang out and wait for other ideas for other ways to remove or to start normally.

  What happens when you try to get on the Internet now (not to mention it doesn't)?

  They you will need to decide if you can fix your Symantec or just drop out all together and use something else after this pleasant experience.

  Some people really like their Symantec/Norton products, so I'll try not not too bad the bash.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• My computer will only start in safe mode

  Original title: HELP!

  I HAVE A DELL STUDIO XPS WITH WIDOWS VISTA 64 WHICH STARTS ONLY IN SAFE MODE. WHAT CAN BE DONE TO FIX THIS?

  Hello

  do not post in all capitals

  all the capitals make it very difficult to read

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
  4. The System Configuration utility opens
  5. Make sure the Normal startup is selected
  6. then click on the STARTUP tab at the top
  7. Make sure that the startup is disabled
  8. Apply - OK - then follow restart guests

• Windows XP will only start in safe mode after Windows updated 09/02/2011

  We have seven Windows XP SP3 computers.  All are set to download/install automatic updates every day at 03:00.  Today, one of them does not start in normal mode.  When the user arrives at 08:30, screen was black and would not, if power to monitor and PC were in.  The user powered PC turned off/on.  He came normally too far that the screen blue, just before the login box appears, sucked to boot options.  Boot in safe mode and safe mode with networking mode.  Restart in safe mode after shows the same result.  The event log shows a SaveDump:

  Event type: Information
  Event source: Save Dump
  Event category: no
  Event ID: 1001
  Date: 09/02/2011
  Time: 08:30:01
  User: n/a
  Computer: TOTB-02
  Description:
  The computer was restarted after a bugcheck.  The bugcheck was: 0x1000007f (0 x 80042000, 0x00000000, 0x00000008, 0x00000000). A dump was saved in the: C:\WINDOWS\Minidump\Mini020911-01.dmp.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Installed updates: KB2393802, KB2476687, KB2478960, KB2478971, KB2479628, KB2483185, 2485376

  Word and Excel will not run.  The office is OpenLicense.  Says can not verify the license for this application.

  Thank you

  aDaniel

  A suggestion: as stated above, I thought I was wrong this posted in the Windows 7 Forum.  In fact, the link under XP for updates takes you to the Forum Windows 7 > Windows Update.  It seems that it would be less confusing, if questions update go to a forum, out of Windows 7 and Windows Update as a stand-alone speaker.

  Thank you for all your help,

  aDaniel

• Vista system does not start after installation of windows update 10thFeb2010. Only start in safe mode. Windows Update does not open

  Updates to auto (windows Update) using.  Downloaded automatically update yesterday (10thFeb10) and when I shut my computer down it started to install them - as usuall.  However start my computer than this 11thFeb10 am and he began to run through regestry files when starting up.  Then it is impossible to load windows.  Just went to a blank screen.  Rebooted several times and were able to start it in safe mode.  Tried system restore but the same thing happens.  Obviously there was something to this update that 'changed' my computer and I'm not happy about it!  Also thought that there could be new updates (perhaps to fix the last update) but I can not even Windows Update to open it.  Tried online and he tells me that I have never downloaded updates and that none are available.

  I use Windows Ultimate x 86.  I hope someone can help me!

  Got a response from Ms.  Good all who have this problem - you have an ATI Radeon graphics card?  Driver is causing the conflict.  Uninstall all the stuff ATI goes on ATI web site and install the download of 'single driver '.  Reboot and then you can download and install other fancy programs that come with your graphics card.

• XP will only start in safe mode and System Restore does not resolve the problem

  Don't know not if this is related to the same reported people of BSOD problems after recent updates, but from Tuesday my computer does not start in normal mode.  I can get it to boot in safe mode, however I tried to restore to several different restore points and nothing seems to solve the problem.  Any suggestions?

  Hello

  Many people face this problem after the latest version of windows update on the XP machine. I would like to know where are the updates that have been installed on your computer Tuesday. You can view them from the Windows update history by examining it from the Windows update site.

  In case, if the KB977165 has been installed then, take a look at this thread and check if this helps you boot normally to the desktop.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1

  If the update history shows the other updates in the history list, please let us know the xxxxxx KB (number) updates, so that we can try to help you the best.

  We hope to hear from soon.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.