Tecra 8100 - screen goes black sometimes
I recently got a Tecra 8100 for cheap on eBay.
The screen sometimes goes black its still on I need to press the shaft close to the screen and it beeps sound sounds and back on.
I removed the frame of the screen and it made the difference for a about a week but just happen again:(mais je croise les doigts pas très souvent.)
I read on google etc. it can be sumtin with led, etc. I just want to know how to replace the part?
What part I need to replace etc.?
I disable all power management things, and sometimes even of it is would no doubt something with the screen.
I need ideas how to resolve this because it's a good laptop for a student lol prity.
Thanks for reading and any rear power
Sorry, but it's really not easy to say what needs to be replaced.
But it s certainly a hardware problem I put t know what should I PIN you meant exactly, but maybe a loose connection is causing this problem I mean a FL-inverter connection
Here's a useful page [how remove and replace card ups FL on Toshiba Tecra 8100 | http://www.irisvista.com/tech/laptops/Toshiba-Tecra-8100/remove-replace-fl-inverter-board.htm]
Maybe it could be useful for you
In any case, these hardware issues are always delicate, and in most cases, each unique piece, and the connection must be checked. It's not easy, and in most cases and the computer laptop technician should take a look on this laptop
When I use my laptop Tecra 8200 with (new) battery, light falls down on the screen, making it almost impossible to work with. I use windows XP. I have havn´t found all the settings to adjust it - anyone know what to do?
Appreciate the help!
On the Toshiba driver European page you will find the Toshiba Power Saver for Windows XP this time that it s a 4.05.00 version
You can find it in the Archive-> Tecra-Tecra 8xxx--> Tecra 8200-> PT820E-> Power Saver >
Screen of my Satellite A210-19 t starts to turn black and white however the computer is still on.
Its not not in hibernation that I'm at the computer to use it.
Any suggestions on what it might be and how I can fix this problem?
As I just bought
I read in this forum about similar issues all of a sudden the screen is blank. The graphics driver and BIOS update helped to get rid of these symptoms
I have a Satellite P100 and randomly, the screen goes black but the system continues to operate. I downloaded the latest drivers from toshiba, all power options the maximum support, run ccleaner and driver Sweeper to remove the old entries driver, re-installed the login screen of the mobo and nothing seems to work.
The screen goes black sometimes when using windows but STILL turns black as soon as the ramps of gpu for example of playing a video or comparative analysis of the graphics card.
Any help would be greatly appreciated.
Model: Toshiba Satellite P100-PSPA6A-02NO21
Processor: Intel Core 2 Duo [email protected]
GPU: Nvidia Quadro nvs 510 m
Chipset: Intel i945PM
HARD drive: Fujitsu 148GB
RAM 2 GB
Windows 7 Ultimate SP1 operating system
> ALWAYS goes black as soon as the ramps of gpu for example of playing a video or comparative analysis of the graphics card.
This means that the graphics card is defective
Theoretically, it could be an overheating problem too. Higher time can also cause a black screen. You should try everything that is possible to clean your laptop using the jet of compressed air to blow the dust from the cooling fans.
If it doesn t help it seems to be a hardware malfunction but seriously a point would be interesting: have you noticed the same thing with preinstalled OS (Vista) Toshiba?
my screen goes black, sometimes not for days sometimes after 15 min. What is happening and how can I
Thanks for posting in the Microsoft Answers forum! Your question is still there while inSafe Mode? If so, you try to run a SFC scan for troubleshooting the corrupted system files on your PC.
To perform a scan of the SFC, follow the steps on the following link: How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7
Your computer may also be infected and needs to be cleaned in order to work properly. I suggest that you try the steps listed in the related post below with your question:
You can also try a clean boot troubleshooting method to see if it helps you solve your problem.
Please let me know if this helps J
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
I bought this fantastic machine called spectrum x 360 and I love it.
Unfortunately since the early days I'm facing what I think it's a problem of driver/software (not the related material).
This problem only occurs when I'm on Windows, not in the bios or at the startup. JUST IN Windows envinroment, especially after the login, and when the computer was turned off. Sometimes when I use it after a while, randomly.
This occurs only when the spectrum is on battery. The problem does not appear on AC adapter.
Problem: the screen goes black randomly for a few seconds and then reappear, sometimes the entire image on the right slide and there is a part that looks like yellow and corrupt, then goes black and reappears.
Windows Version: I'm on Windows Home 64 bit, build 14393.321 10 (update of the anniversary).
The entire screen works fine for normal operations, no artifacts.
Replication of the problem
Initially, I was able to reproduce the problem with the driver build 4360 (which is the version of the driver from the HP site). Whenever I loaded the home page of youtube and the banner has started playing on the screen went black sistematicly.
Then I updated the GPU driver through the Device Manager, which has improved my GPU driver to 126.96.36.19994, as of July 25, 2016 and the problem happens much more rarely.
Now I am facing this problem again but Edge works correctly and is not the cause of the problem, it can appear even when I don't do anything with the PC.
I noticed this problem appears when saving options are enabled for the Intel GPU (I'm trying to translate this to English because the GPU driver Panel is in Italian):
-update panel houses;
-advanced mode; energy saving
If I disable these options, the problem does not appear or, better, for I've tested so far, he could not displayed when options are not in market, but I have not tested this very long to be sure.
In my opinion, there is a bug in the display driver, or some customizations made by HP causes problems with the driver.
The rest of the computer works correctly.
Any idea to solve this problem? Or should I keep these options turned off power saving?
Hi, thanks for your help.
I have a passion for COMPUTING and ex-computer SCIENTIST, I am familiar in surveys on hardware/software questions and hope that this post will help some users get rid of this problem.
Black screens and screen corruption has been issued by the option called "auto refresh Panel" energy saving.
I did a lot of hours on battery (condition where this pop ups problem) in these days and the problem didn't show when it was turned off.
To verify that I tried to activate "Panel options self-identity" in certain occasions and, at random, on the first boot of the machine (after being turned off) the problem arises again.
It certainly is a problem with this energy-saving option.
Now everything works fine.
If the problem appears again, I will post more information.
Thank you for your support.
I think it would be useful to stick this post on top in this section of the forum, to be useful to other users and being more visible.
I got my satellite A210-171 for a few years and a few months ago, everything was OK.
But our when I'm working or watching a web my screen goes black and nothing seems to work?
The only way around this is to turn off the power switch on the laptop then restart it again.
I then get a message saying roughly...
Computer has not closed properly OR sound closed to protect all data, then a countdown begins to re open!
It may be OK for a few hours or maybe a day there is no limit of time on it!
If anyone can help I would be very grateful, but please don't use of computer jargon that I don't understand
It is really hard to tell what is causing this problem. It could be a hardware malfunction or a software problem.
But as Auma says you should test the RAM with Memtest86. It's really very easy to use and can detect modules memory defective RAM check it!
Another question is have you installed a different display driver or updated? I ask this question because the display drivers they are not causing Toshiba sometimes of questions.
In any case, I would recommend updated display driver and check the site Web of Toshiba for a update.
And before moving on to an authorized service provider reinstall you Windows using the Toshiba recovery disc. So you will get back factory settings and with these settings, your laptop should work fine.
My iMac screen is absolutely randomly fade to black (sometimes with the seeds), but the system continues to work very well. It happens even in recovery mode (command-R to chimes sound), but worse than usual. After about 10 to 20 seconds in the mode screens recovery becomes black.
Is - this problem is software or hardware?
P.S. screen goes black when Windows is running under Bootcamp so.
iMac 21'5 late 2013, GPU Intel Iris Pro, OS X 10.11.3 (problem with 10.11.2)
Impossible to say with certainty, however please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.
If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.
HP Touchsmart TM2-1010ea
Windows 7 64 bit
recently updated to AVG, nothing of other news.
When I use the high-performance GPU the laptop screen going black and white, still functional. When you use two screens, the second screen is in color, while the laptop is in black and white. using the screen of the laptop power saving GPU is again in color.
Welcome to Hp forum. Your question is not in the list. http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=56801&tmp_task=solveCategory&CC=UK&DLC=en&lang=en&LC=en&product=4100044 So, in this case I sujest a restore back to remove what are the mistakes caused by a bad AVG update. GoTo all programs search and type in Recovery Manager click that above and open it. Click Yes (white box) so it apears. Select Microsoft System Restore Click next to three windows now you will see a list of dates, select a date prior to the installation of the update, then click. Let the computer do its restoration. Once done see if your problem is solved, if so try the update again, make you that the update is for 64-bit Windows 7 computers before you download it again. If that happens again once you know what AVG is not compatible for your computer.
Probably you have only received part of the witch update caused this problem due to the disruption of atmospheres. Sometimes this happens. Put day of my HP only made once. I just did a restore back and downloaded the update again and the second time through work. Please click on Bravo if this solves your problem. Thank you frrw.
I said the video card is corrupted or is overheating.
The screen goes black randomly. Sometimes 2 minutes playing or until hours later. Sometimes it will not.
Connect the computer to another monitor. If the problems are gone, replace the original monitor. If the problems persist, then you have hardware problems on your computer. You can troubleshoot the hardware yourself:
This includes exchanging the video card for a well-known work.
On tests of hardware failures often alleged swapping parts by parts checked. If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.
MS - MVP - Elephant Boy computers - don't panic!
Original title: SCREEN GOES BLACK, COMPUTER STILL WORKS. A MESSAGE CAME ON A MIRROR SCREEN, COMPUTER WORKS FINE IN SAFE MODE
COMPUTER STARTS SOMETIMES, BUT SA SEEMS IF THE NETWORK IS ON THE DISPAY GOES OFF, A MESSAGE CAME ON SCREEN MIRROR, EVERYTHING HAPPENED THIS WEEKEND. DID A FULL VIRUS SCAN, NO PROBLEM, DID SPYBOT AND SOME COOKIES WERE FOUND. vISAT OPERANTING SYSTEM.
If the computer is running in safe mode, then start in safe mode and perform a clean boot to verify if a third party program or service is the cause of the problem.
Start your computer in safe modeand try to perform a system restore, safe mode.
Check out these links for more information about the system restore:
Try to put the system in a clean boot.
Refer to this article for help:
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
Steps to perform a clean boot:
a. click the ORB start on your desktop
b. type msconfig in the search box and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
c. in the general tab, click Selective startup.
d. under Selective startup, clear the check box load startup items.
e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
f. click OK.
g. When prompted, click on restart.
NOTE: Please check that you start your computer in normal mode when you are finished troubleshooting. Followstep 7 of the article mentioned above.
Afzal Taher-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think.
After that I have enter my password and click on enter, it says welcome with the thing to load next to him. Then that disappears and the screen goes black and all I can see is the pointer. Sometimes the bar on the bottom with start on it, is also displayed. Any suggestions on what to do? It works fine when I run it in safe mode.
original title: after I Log In, the screen goes black. Help me!!!
You can also try theclean boot to see if this is due to a program/process.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer
You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
on devices and UNINSTALL - REBOOT.
Another method to try to get to the desktop (try in normal Windows Mode without failure)
CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
by tapping F8 as you start several times.
First check this thread in case it is simple and if not to come back to this thread.
Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
That there is no information on a black screen as it is on a blue screen just adds to the
Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
Google to see the proposed repairs, whom some have worked however these cover a wide
Here's a video of one of them.
Here's another fix
You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
manufacturer will sell them at low prices. Or try in safe mode if you can get there.
How to make a Vista system restore
You can create a recovery disc or use someone even version (to do the system restore there only to)
How to create a Vista recovery disk
These require the correct Vista discs since you can not start safe mode.
Try the Startup Repair tool-
This tells you how to access the System Recovery Options and/or with a Vista disk
Try recovery options Startup Repair
How to do a startup repair
Here are a few Google searches where many have found different solutions:
Vista black screen - check that a 1st
Vista black screen Solution
Vista black screen Fix
If necessary and you can access all ordinary Windows.
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.
You can use another DVD that are not protected but you will need to copy you have the product key.
If nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.
This tells you how to access the System Recovery Options and/or a Vista DVD
How to perform a repair for Vista Installation
Another method that works sometimes: at the command prompt, type of Vista startup disk:
(type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
CD c:\Windows\System32\winevt (there is a space between cd and C :)
Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)
I hope this helps.
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
This has just begun. Screen goes black and the computer shuts down. Is also off sometimes when I try to wake him up.
Hello Mary LouJoseph,.
Click the link for the who might help with your problem of black screen.
This is whyis my screen black when I start Windows 7?
Let us know if that helps.
Original title: the screen goes black - windows 7 home premium
my screen turns black during surfing. I use Safari and have several windows open at the same time. Photos on Facebook, I click find sometimes black. All windows to show a little blue circle spinning and I have to restart... I uninstalled Safari thought it was but it kept happening. I'm at my wits end. Have done all updates as they come in...
1 have had any changes made on the computer before the show?
2 - is the problem occurs when you use Internet Explorer?
I suggest you to use Internet Explorer and test for the problem on the computer. If the problem occurs in Internet Explorer, also try the procedure described in the link and check if that helps.
Try the procedure described in the link.
Tips for solving problems when Internet Explorer hangs or stops working
Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
I suggest you to restart the computer in clean boot mode and check if the problem persists.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
If you are not facing problems with Internet Explorer and you should always check with Safari, I suggest that refer you to Apple support link:
Hope this information is useful.
Maybe you are looking for
I would like to change the thai keyboard layout, or create a new one with a key mapping different. This former article describes a way, but it may not affect El Capitan: http://xahlee.info/kbd/osx_keybinding.html. The "Keyboard shortcuts" directory d
I am trying to sync my Outlook calendar on my MacBook Air with my iPhone and despite checking the appropriate box in the setting of preference it doesn't seem to work. Any suggestions?
Hello My friend has recently formatted his computer and reinstalled Windows Vista Ultimate Edition. Now, he can get the internal Wi - Fi to work. It uses a Toshiba Notebook A210.Windows Vista does not detect the internal WIFI card. I do not exactly k
I have a Lenovo Y410p. I erased the drive and I lost Lenovo VeriFace. I did a clean Windows 8.1 and redownloaded Lenovo Veriface installk. Unfortuantely VeriFace doesn't work anymore. It does not install and when I try to run it, it says it can opera
Hello I replaced my hard drive and windows 7... but now, the network controller driver is missing. When I did a search an entire list came have idea that to install. Please help, thanks... HP Pavilion g7-131ous