Tecra 8100 - slot memory B do not work

Similar Questions

• Tecra 9000: SD card reader does not work with XP

  I've made some progress on this issue, it seems that Cardbus devices cannot share IRQS, although the main problem is that FFDFB200-FFDFB3FF memory address is shared by the SD card controller and device memory SD card. Unless we find a way to edit the registry to resolve this conflict of memory, the simple answer is that the SD card reader does not work under XP.

  I think that it would take a major surgery of the register or re-writing of drivers to move the address of memory used by the SD card device, I always work on this for now.

  Can someone support Toshiba or Toshiba Marketing explain to me why my Tecra T9100 has a "Designed for Windows XP and Windows 2000" sticker on it, when Toshiba does fully support XP on the 9000 series?

  David

  [Edited by: admin]

  Hi David

  Unfortunately, I n t think that you will find here a Toshiba marketing person or other departments. It is ONLY a user to user forum.

  What you say, it is simply NOT true.

  The Tecra 9000 was delivered with 3 different OS.
  It was delivered with Windows XP Pro, W2k and Win98. You can order all the images of this Toshiba home Toshiba service partner. That's why Tecra 9000 does support Windows XP!
  Tecra 9100 has been bundled with Windows XP and Windows 2000 and also supports Windows XP!

  Of course, there are different models with a different hardware configuration, but all supports Windows XP.

  I put t know why you get this error message or why you cannot use the SD card, but I guess you don t use the image of Toshiba. That's why you installed your operating system isn't properly. Because you are a newbie you don t know the Toshiba all the driver installation must be done in the right order and all Microsoft QFEs must be installed also.

  As you can see you must pay attention to many important things if you want to manually install the operating system.

  Good day

• Tecra M10 - 10z - 3 G does not work after installing Win 7

  Tecra M10 - 10z, I installed Windows 7 pro 64-bit
  Everything is correctly configured, but the 3G connection does not work: the message is "no network".
  with Windows XP is ok.

  I can't update the firmware or similar.

  Y at - there someone who can help me?

  TKS

  Hello

  To use the 3 G, you should first check whether the module G ericsson 3 has been successfully installed.
  Where there is a visible yellow exclamation point in Device Manager, the 3G driver must be reinstalled.
  I found on the page of the Toshiba UE driver:
  [Driver Win 7 3 G Ericsson | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 5 & selSeries = 148 & selProduct = 813 selSho rtMod = null & language = 13 & selOS = 30 & selType = 295 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 295 & page = 1 & ID = 71930 & DISO =-1 & driverLanguage = 42]

  Additionally, make sure that the 3 G RF power control utility has been installed properly.
  3 G RF Power Control utility"turns your 3 G at the start.

  This tool can be found here:
  [3G RF Power Control utility for Win 7 64 bit, | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 5 & selSeries = 148 & selProduct = 813 selSho rtMod = null & language = 13 & selOS = 30 & selType = 322 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 322 & page = 1 & ID = 73658 & DISO =-1 & driverLanguage = 42]

  Hope the 3G network functions the reinstallation of these two tools.

• Tecra A11 PTSEOU: Some keyboard keys not working not

  Hello

  In my Toshiba Tecra A11 PTSEOU - 08904L model, some of the keys on keyboard did not, initially, key 6 did not work. But now about 12 keys did not work.

  When I press one of these keys, I hear a single beep and nothing happens.
  Even I can't see the bios menu when you start the computer as "press f2 for boot menu".

  Is there something to do with the bios for this problem?
  I tried updating the bios, but the installation failed saying incompatible bios. Help, please

  Thank you
  Thawfeek.

  > Is there something to do with the bios for this problem?
  BIOS? Why ORGANIC?
  I assume that the problem of its equipment and you will have to replace the internal keyboard.

  Just to confirm the problem with keyboard: you can connect external USB keyboard.
  In case the external keyboard would work correctly, the problem is related to the internal keyboard.

• Presentation of Toshiba Tecra A8-103 & Assist buttons do not work

  Hello world.

  I'm new to this forum and hope someone can help me. I checked elsewhere, but could not find a working solution. Here is the problem Im facing with my laptop Tecra A8-103. I found yesterday evening (31 October 2009) that Toshiba Assist button and the button Toshiba format are no longer works when you press on them. What is someone having the same problem and how did you solve it? If anyone knows how, please share it with me. I need a step by step solution because I'm not good with computers. Thank you very much.

  Other information about my Tecra A8-103:
  He joined Windows Vista Business Edition inside when I bought it 2 years ago.
  With the updates of windows, I am now on SP2.
  Model: PTA83E

  I have tried the solution, but does not work:
  I reinstalled the driver of value added package of download from Toshiba site nothing is done. What other option that I need to get this 2 buttons work?

  Please help me. Thank you at the beginning.

  Winston to Philippines

  Hello Winston

  I don't have this model of laptop, but as far as I know, these buttons can be defined by the user. So try please start button configuration tool and check if the option is where you define which application should be open to each button.

• Tecra A11 - 11L - fingerprint sensor does not work

  Hello
  I had a problem with my Tecra laptop. The fingerprint sensor does not work since yesterday. It also disappears from the hardware Manager. I tried to reinstall the utility, but the setup.exe will not run successfully. When I try to install the utility directly from the amd64 Directory installation will be successful, but the software is unable to connect to the fingerprint sensor. I also tried to install the original Windows image, but the sensor does not work.

  You have any ideas?

  Berst cordially
  Thunder1988

  You can try a BIOS update and set the default BIOS. If it still does not appear in Device Manager, the player is maybe defective or there is a connection problem. I'm guessing that the laptop is still under warranty, you may have to send the laptop to a Toshiba repair center.

• QOSMIO F20-132 TV on media center card and memory Player do not work

  Hi, I have a lot of problems with my qosmio. first the media Center TV never works and I don't know why. and the memory card reader does not work too... I don't anderstand why... If someone hepls me thank you.

  Thank you

  [Edited by: admin on 10 June 06 21:09]

  Hello

  On this way I can't tell you why your TV doesn't? t work. Test it with Qosmioplayer.

  If you wish to discuss your problem maybe you should give a little better description how you try to watch TV on your device. You can't expect a lot of help with the description of a single sentence.

• Tecra A7 - keyboard and Touchpad do not work after standby or Hibernation

  I have a Tecra A7 to XP. Once time and a some time to wake up from sleep or hibernation, the keyboard and the Touchpad mode do not work. I can always open a session using the recognition of fingerprints. An external USB mouse and then also works.

  I have to close the session and Re-Log-On using the external mouse to the keyboard and the touchpad works again. Very annoying, especially when you are in a hurry... hehe

  Anyone else has a similar problem? All solutions?

  Thanks for any help guys!

  See you soon,.
  OzzieMark

  Have you installed the drivers for your mouse or external keyboard? For example the Logitech drivers?

  Try to uninstall the third-party drivers 3, they may be in conflict with the drivers of Toshiba.

• Memory stick does not work when insalled in plugin usb

  I bought a memory stick attached, it keeps raising no malfunction of the driver software

  A memory stick should not require some special drivers run they run on inbox drivers. If the drivers that came with Windows itself lack so none of the memory key usb will work.

  If you have a different memory stick try to plug into this computer and check if it works.

  If you have access to another computer test plug this memory stick to another computer and check if it works.

  On the computer that has a problem try equipped with a utility spell system "sfc file analysis".

  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista

  In addition to this, you can try the steps of troubleshooting on this link: http://www.kingston.com/support/usbflashdrives/faq/pcdt_20.asp

• Tecra A3 - Creative wireless mouse does not work

  My Creative wireless mouse does not work while the touchpad is installed.

  Even if I turn off the touch pad, the seal of the mouse does not work.

  Anyone know how to fix this?

  Thank you
  R.P.

  Hello

  On this path, it is not easy to say what the problem is. I guess you have some software installations to your external device. Install it and it should work.

  As much I know external mouse functionality does not depend on the touchpad settings.

  Good bye

• Memory card does not work on my Satellite L305D-s5893

  Hello

  I reinstalled the operating system and downloaded the drivers from Toshiba s drivers page, the only driver (I thought) doesn't you work the card reader.
  I put an SD card in the card reader, but the OS does not read anything.
  Is there another drive for the card reader, or maybe the card reader does not work?
  How do I know this?

  Hello.

  If you can not use the driver from Toshiba, it is without doubt that the pilot is not suitbable for you. Toshiba has a lot of brands for Satellite L305, you may need to look at the correct driver for your model. From my experience, apart from the value Pack provided by Toshiba, I'll use Windows Vista update to find the most recent and correct drivers and download driver GP of supplier of the graphics card for my laptop after each new installation.

  Hope this can be your answer.

  Kind regards.

• Tecra M5: print fingerprint sensor is not working properly because a drink was spilled on the keyboard

  My finger print sensor does not work correctly as a drink was spilled on the keyboard. While booting, it automatically "fails" 5 times in a row (without any attempt to slide a finger), and then by default at the entrance of password to boot the disk hard machine.

  This is not a problem and all I want to do is disable the finger print sensor, but cannot work out how to do this. I tried to uninstall the driver, who seemed done without any problem, but during the reboot, the sensor still seems active, and always goes through the same process.

  Everything else works fine and it's just a minor niggle, but I would like to delete the gene of it me beep 5 times then it does its thing.

  Can someone tell me how I turn it off completely?

  Thank you.

  Did you remove the fingerprint software? If Yes check if some unknown device is listed in Device Manager. Please post the result.

  Maybe you can try to disable this unknown device and it will not be recognized as new hardware every time when you start the laptop.

• Tecra M7: ESC/Rotation button does not work

  There is "ESC" key on the screen of the control panel (lower left corner). The other function of the button is to turn the screen if you hold for more than 1 sec (depending on the image and the manual).

  This should be handy in tablet mode. Unfortunately, the rotation function does not work for me. The button itself works because flight' does what it says. I don't mean to redefine 'escape' to 'spin', but there is not even this option.

  Someone has / had similar problem?

  Hello

  This ESC/Rotation button works in the same way as the ESC key when struck or changes the orientation of the screen when pressed for more then second. That s right!

  Have you read the additional information in the user manual? I found some nice info in succession the orientation of the screen section.
  You can change the orientation of the screen on three different ways and one in this way is the use of the key ESC/Rotation!

  When Toshiba Rotation utility and Toshiba accelerometer utilities are run, the changes in the orientation of the top and bottom of the screen is automatically recognized by pressing ESC/Rotation for more than a second.

  So remember that the two utilities are run correctly!

  Best regards

• Tecra 8100 - processor/memory upgrade

  Thanks for the help with previous enemy of apology from answers not responding not pc crashed.

  have cannabilised ibm t22 and equipped with 512 ram pc 100 to tecra no idea why, I kinda figured that pc100 is overheating as sage pc100 memory chips, the processor is a 900 I adapted this tecra 600 instead and he sees it only as a 700 despite being a fsb 100 very happy with the gain processor but confused on the question of temp memory It works a HDD 40 gig and xp with a fine dvdwriter, outside temp issue, ideas, thanks

  Hello

  Do you know why laptop manufacturers recommend users to use just original material or tested upgrade parts?

• Tecra T9100, XP, Stand By does not work

  I have a Tecra 9100 with XP pro.
  When I click "Turn off computer", I get a pop-up with 3 buttons: Stand By, shut down, restart
  The "Stand By" button is gray (disabled)
  So far:
  I checked the Control Panel, Power Options
  I updated the BIOS from 1.3 to 1.6
  According to a post in this forum:
  "Try to reinstall the Toshiba Power saver.
  I'm not sure if it will help, but this software from Toshiba is responsible for hibernation mode and standby to 100%. »

  Then, I installed the 'save energy', but had to first install the "common module.
  Still no result

  Hint please?

  Hi Raymond

  The Toshiba power saver is responsible for the standby and hibernation mode.
  But if you have installed this software properly, then you must use the FN + F3 key combination to go to stand-by mode. The hibernation mode will be with FN + F4.
  I put t know if you installed your OS manually or with the recovery CD, but after installation with the recovery CD Toshiba all options should work correctly.