TECRA 8200 does not recognize the second module memory

Similar Questions

• Tecra 8200 does not recognize the RAM in Slot B

  Since a few days my Tecra does not recognize the RAM Module in Slot B. Before everything was fine. I have 2x256MB Modules. I was wondering why my Tecra becomes slower, the last days, and then I saw that I have now only 256 MB of RAM. I have change the slot Modules A to B. I checked also the two modules of RAM with MEMCheck. Both are ok! Just at the moment where I put a RAM for Slot B and none in slot A my Tecra won't start! If I insert the two module my Tecra boots but with just 256 MB of RAM.

  Is there another solution then buying a new laptop? Is my Mainbord damaged?

  I was so contently with my Tecra ;-) so far

  The slot B is probably defective. Only solution for me is to buy compatible 512 MB module and use it in A slot. According to specification for laptop, your device can handle with max 512 MB of RAM.

• HP 6120 t BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller

  Hello

  HP 6120 t (vista) BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller. The other SATA disk and the DVD player came with the machine.

  I hooked my old 200 GB Hitachi drive via the controller. I also put the jumbers in the present as a slave. I also took the original WD drive and just connect the IDE hard drive. BIOS do not show any drive at all.

  I would try something possible at this time I have a lot of my data on the old disk.

  Thanks appreciate any suggestion.

  Try to enter the BIOS and I believe under change of Advanced menu of SATA to IDE or Enhanced.

  You need to do when you install Windows XP or you will get a blue screen and it does not start.

  Don't forget chang back when you put it in your drive home hard sata.

• First does not recognize the video modules.

  First does not recognize the video modules. I have updated the readers without results, also update the bios. All the other adobe products work except the first.

  You have a laptop with dual video?

  -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html

  -http://forums.adobe.com/thread/1001579

  -Use the BIOS http://forums.adobe.com/thread/1019004?tstart=0

  -Why link http://forums.adobe.com/message/4685328

  -HP Fingerprint/password in conflict http://forums.adobe.com/thread/911575

  -Utility from Mac http://forums.adobe.com/thread/1017891?tstart=0

• Tecra M1 does not recognize the DVD drive after replacement

  I am trying to install a new drive CD-RW/DVD-RW on a Tecra M1; However, when the computer does not recognize the drive.

  Is there a solution to this?

  Thank you

  Colin

  For me it s case.
  I would say that the BIOS can't handle the new player properly because of the wrong master/slave/c-salt settings
  Readers slim for computers laptops support setting master/slave/c-salt settings and these settings can only be changed by changing the rider as on desktop drives.
  So it is very important that you purchase a compatible player and supported because disks with incorrect settings will not work.

  Before buying a car, you should ask the service provider to Toshiba for a caught player supported and compatible

• Tecra M9 does not recognize the SDHC 4 GB

  Tecra M9, Windows XP

  The internal card reader does not recognize the SDHC 4 GB (provider: "extreme memory"), being inserted in camera or PNA not connected via USB, no problem to read or write to the card.
  No idea how to get the card to work with this card reader?

  Hello

  I have an idea.
  I think that the SDHC 4 GB card is not recognized because a Microsoft patch is not installed on your XP operating system.

  Microsoft has released this document which should help you to solve this problem:

  [Hotfix for Windows XP that adds support for a capacity of more than 4 GB SDHC cards | http://support.microsoft.com/kb/934428]

  Good bye

• Win XP does not recognize the second disk in the Qosmio F30

  Hello.

  You have a problem...
  After using the recovery disk WinXP MCE does not recognize! second HARD drive.

  I mean in the Device Manager it's ok I see 2 hdd... but in his only C:\ Explorer

  Utilits RAID recognize also second HARD drive.
  But I'm going to use this HARD drive not for mirorring... I need this second HARD drive as separate HARD drive.

  Could someone help me solve this problem?

  Just format the drive and make it ready for Windows to use.
  Go to control panel-> administration-> computer management tools-> Storage-> disk management

  Here you will find all the options necessary to make your second HARD drive in Windows.

• Tecra S5 does not recognize the SDHC 4 GB micro card

  Hello.

  I have a 4 GB microcard SDHC and the reader of my laptop does not recognize the card...

  Help.

  GR Arno

  Hello

  Are you sure that this laptop supports this type of card?

  As far as I know THAT these cards are compatible:

  Card SD - 8 MB - 2 GB
  SDHC - 4 GB card
  -16 MB - 2 GB xD Picture card
  Memory Stick - 8MB - 256MB
  Memory Stick Pro - 256 MB - 2 GB
  MultiMediaCard - 8 MB - 1 GB
  miniSD (with SD adapter) - 32 MB - 2 GB

  Only the SDHC card and not SDHC micro card is supported

  Concerning

• Portege 7220 does not recognize the Extension of memory (Kingston)

  Hello

  Recently, I wanted to update my old notebook, Portege 7220 with a 256 MB Stick of Kingston Ram. According to their website, it should work, but the machine does not recognize the memory at all. (just using internal 64 MB).

  I can't upgrade the Bios either, because when I press F12 when the computer starts, it cannot read the floppy drive in the docking station. Do I need a USB floppy drive for that? I tried with a usb key, but it does not work. is there a possibility to redo an update of windows? (Comp running Windows 2000)

  Thanks for your help, much apprechiated.

  Rawnonymous

  > I can't upgrade the Bios either, because when I press F12 when the computer starts, it cannot read the floppy drive in the docking station. Do I need a USB floppy drive for that? I tried with a USB but that doesn't work. Isn't there a possibility to do a windows update? (Comp running Windows 2000)

  Only the TRAD of the BIOS version exists for this Portege.
  This means that you will not be able to update the Windows operating system running, but you will need an external floppy drive to perform these updates.

  Regarding your problem of memory;
  Check this box:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=5388&ft=m&St=3

  You can find the compatible memory module. It s a PC100 144 pin SODIMM.

  Maybe you used the not-entirely-compatible module or the module is defective

• Satellite L30-113 does not recognize the two modules DIMM RAM

  Hello

  I have a Toshiba laptop Satellite L30 113.
  It has 512 MB of RAM and therefore struggled to run Windows Vista, so I bought another 1 GB of RAM.
  It's DDR2 553 MHZ (PC4200.

  The problem I have is that the laptop does not recognize both DIMMs, i.e. the old 512 MB and the new 1 GB when they are in the whole PC. I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB. I tried the DIMMs around two ways but without success.

  Did I miss something?
  They should be the same size as in the bad old days?
  What is going on?

  Thank you

  Adam

  > I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB
  Seems that the two RAM modules are not completely compatible...
  I've read several times on these issues and to be honest it s are not uncommon

  I advise you to buy two identical RAM modules ad then to try again

  I'm afraid there is no other solution for your problem of m.

• Tecra 8000 does not recognize the new HARD drive

  I read on this forum and Google search, but nothing helped.

  I think the disk on Tecra 8000 (Pentium II, 266 Mhz) is "dead".
  I tried to replace it with another laptop to see if that would work.

  The laptop does not, even if I put just like the original.
  Y at - it somehow special or what I have to change something in the Bios?

  Hello

  Don t need to change BIOS settings

  As long as you use the compatible HARD disk, the BIOS should recognize the HARD drive automatically without big problems
  What drive did you use? What size, interface, etc.

  The Tecra 8000 is an oldie and I think that you could use only the 4 GB; 6 GB; 9 GB; 10 GB; 14GB IDE hard drives.

  More large hard disks would be not recognized by the BIOS.

• 13 Alienware does not recognize the second ssd m2

  I just installed an ssd in m.2 ADATA in the second slot, and while the drive appears in the bios and in intel rapid storage app it does not appear in windows as a usable drive.  What I understand is the original ssd in the 'c' drive and I it does not show as a "d" or any other player.  He also appears in Device Manager as well.  What should I do to make it appear as drive "d".

  Thank you!

  Sounds like it needs to be initialized and formatted in Windows:

  http://www.overclock.NET/t/1227647/how-to-initialize-and-format-a-new-disk-for-use-in-Windows

• Satellite A100-289 - does not accept the second module RAM

  Hello
  Sorry for my bad English

  I have a problem with my RAM secend slot. At the first bank i installt 1 GB 533 MHz DDR2 RAM in the second Bank too. The laptop starts but when I installed the second RAM after the BIOS Windows screen accepts 2 GB of RAM.

  [PC-information]
  Modellname Satellite A100
  TEILENUMMER PSAA9E-11H047GR
  Serial number 96304832Q
  BS-Version Microsoft Windows XP Professional 5.1.2600 Service Pack 3
  BIOS 6.00 version
  Processor Intel (r) Core (TM) 2 CPU T5500 @ 1.66 GHz

  Hello

  > but when I installed the second RAM after the BIOS Windows screen accept 2 GB of RAM.
  This means that you install RAM modules while the laptop is running?
  I m wondering your laptop still works. Normally, you could destroy the whole motherboard and the module.

  Anyway, to me it sounds like that your laptop isn't compatible with the memory modules vive. What modules do you have exactly?
  I have good experiences with the Kingston modules.

• Tecra S11 does not recognize the Art store

  Hi guys,.

  I have a new S11 with Win7, 64-bit and a disc Toshiba StorE art. The S11 will not see the drive, but my other machines running XP and Vista have no problem to recognize.

  Any ideas on how to access the drive with the S11? Input much appreciated!

  I recommend you to follow:
  -install the OS using the Toshiba recovery disc or HARD drive recovery procedure
  -Install all updates from Microsoft
  -reconnect the HARD drive

  Must work on Win7 32/64 bits.

• Tecra M9 - does not recognize the 320 GB HARD drive

  Hello @ all,

  I tried to install the HARD drive, but it seems to be not recognized by the BIOS. Any chance to get this problem resolved?
  With Acronis Disk Man. I get an error message: No. HDD installed!
  BIOS version is 1.80, HARD drive is a Seagate ST9320421ASG (Momentus 7200.3 320).

  Thanks in advance

  Hello!

  Have you tested the HARD drive in a laptop or in an external enclosure? Maybe it s faulty.
  Or you test another HARD drive in this notebook.

  Normally a 320 should work in Tecra M9.
  There is a new version of the BIOS on the Toshiba, but I doubt that the problem of the article, but try to update.

  Good bye