Tecra 8200 freezing when moved

Similar Questions

• laptop freezes when moved

  My G6 laptop freezes when moved.  When the battery is jostled when you move and to base it on something again it freezes even when it is plugged.

  SteveC66 wrote:

  The name of HP is on the laptop - I spent everything I had at the time, on what, at the time - it's

  HPs doings and I am very grateful for your help but HPs name wrong in my house any longer and I'll let my friends know what happened with this laptop.  I guess I should have come with an Asian import.  I bought this because it's an American company - my mystake.

  Sorry to hear the bad experiences your having with the new HP I have expected some resolution about HP for you, but I guess that your next step is to enter the HP support and talk to a Manager or supervisor and get a resolution a bit if you can the stock market that. Otherwise if an is another portable computer W8 wifi even goes down so you might go for W7 that is or is not hp laptop and I hope that your experience will be better this time.

• Tecra 8200 freezes every few minutes with the XP Pro Retail version

  I've updated a Tecra 8200 with a retail version of Windows XP Pro SP2 (256 MB RAM) it was a new installation after reformatting the drive. I think I've loaded all Microsoft Windows updates and drivers from the site Web of Toshiba.
  The laptop freezes for about 30 seconds every few minutes, even when you try to open a session.
  Also when starting for the first time there is a constant repetitive ping of the noise, which I assume is the hanging windows startup sound. Finally, it stops and it can be used for a few minutes.

  Can someone please?

  Hello

  In my opinion, you should buy more RAM. As far as I know, this unit can manage with 512 MB max. You can use PC100 256 MB (PA3069U - 1 M 25). I'm sure the spirit more RAM there are much more likely to make it work.

  I hope that all hardware components are recognized and installed correctly. You can also try to check which processes are active and I advise you to stop. On this way, the processor has more power for other applications.

• Pavilion 15-p077TX: my HP Pavilion p077TX 15 notebook freezes when moved from its position

  Whenever I move my laptop from its position, it freezes. As I kept my phone on my bed and I pick it up and place it on my lap then it crashes / freezes. So every time I have to remove the battery and put it again whenever this happens. Sometimes twice a day. It gets really frustrating whenever you do something important. So what I can make of this is that whenever I move the laptop to a certain speed, it freezes, it means that something inside it moves from its ideal location (doesn't happen when I move it very slowly).

  Any cause of definte and the solution?

  Thank you

  Jousset

  Hi @krum02,
   
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 15 - p077tx and concerns with closing while moving Notepad. I recommend that you only take the laptop to a repair center to find the part that is loose. You can check your warranty here.

  Please let me know how it goes.

  You can say thanks for trying to help, by clicking on the Thumbs Up below! .

  Thank you.

• Computer freezes when moving files, making records etc...

  Recently, he began... I had business with him for about 2 weeks. It got progressively worse. Whenever I try to delete something, go to something like a file in a folder, or even extract winrar process crashes. (As if im move a file in a folder of the mobile window comes up and it just stays there and doesn't go away. I always have crtl + alt delete try it so he could disappear.) I'm not sure if it's a windows problem or the problem of products... but it my computer acted first to the top when I uninstalled 3 elements using uninstall utility. I don't remember deleting anything matching as an update of windows etc... But I deleted like 3 articles that I didn't need. My internet browsers starting first Act, google crome wouldn't be able to remain open for more information, then 3mit without crashing, it wouldn't save all bookmarks either. I now use internet explore, because google will not work (I have firefox but it is incredibly slow, it began to be slow at about the same time that google was falling apart). Then as a day after google crome was unusable such basic operations that move a file, extract the content of an archive and rename a folder became impossible to do, if I renamed it a folder would freeze my office, I have to Ctrl + alt delete, end process to explore, would begin again to my office be usable again. So I tried a system restore and as I expected it failed... so... I ' v has had problems with this computer in the past, but I have no idea what's not this time. I thought of making a complete reinstallation of windows, but I need my computer to last December, which is when I intend to buy a new computer and I don't want to lose my stuff when December is the corner of the street.

  Here's my dxdiag on wikisend: dxdiag

  Hi Jack C.

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 2: Follow the steps in the article.

  Optimize Windows Vista for better performance

  For reference:

  Slow PC? Optimize your computer for peak performance

  How to make a computer faster: 6 ways to speed up your PC

• ENVY m6-1205dx freezes when moved

  In may, I bought a laptop from m6-1205dx WANT, and it is so far worked very well for me. However, last week, she began almost every time that the computer is moved physically freezing - there is no error message, the system just hangs and it is necessary to manually restart using the power button to get an answer out of him. It is definitely a hardware problem - I have the same problem on 64-bit Windows 8 and Ubuntu 64-bit 13.04.  The research I did on the Internet indicate that it is probably either a bad connection in the system, a bad hard drive or a crack in the root of the hair in the motherboard. I eliminated the possibility that it is the battery - I took out the battery and ran on the current system and the error still occurred. I ran a diagnostic test fast at startup via the F2 shortcut, and it found no problems with the material, which seems to suggest that it is not a cracked disc tray - this suggests a bad mother or a bad connection. The system is still under warranty, so although I am comfortable working inside the computer, I would rather go browse around inside to see if it's something as simple as a stick of memory let go if it will void the warranty. How can I go on diagnosing this problem?

  Hello

  You can certainly try remove and re-seating the memory modules - see Page 63 on the guide below.

  You can also remove and re-connect the HARD drive.  As well as disconnecting from the system board, I would also suggest re-allocation of places the HDD adapter - Page 57.

  Guide to maintenance & Service-M6-1200.

  Anything more invasive (ie remove the system board, etc.) would almost certainly result in the cancellation of your warranty, so my best advice if the foregoing is not to fix the problem would be to contact HP and arrange for repair under warranty.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• The Windows 7 Explorer freezes when moving files or when I right click a file in my computer, I think it's because of the size.

  It is not malware, etc., or what you guys proposed previously.  I think that Windows is trying to display a preview of the file, and this should not be happening if it slows me down so much!

  Hello

  Look at the link here because it has some good suggestions to help with Explorer Windows has stopped working.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  You can also look at this link for the optimization of the performance of Windows 7.
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  I hope this helps.

  Marilyn

• camera raw Adobe 6.6 freezes when editing

  I have a pc, it freezes when moving from one photo to the next. It is a new and very annoying phenomenon since I have to force close and all over again. I did tons of action shots, and that's what would take an eternity. I have a newer computer with a great processor and plenty of RAM. As I said, this is a new development. Can anyone help?

  Same problem for me - and always there is no any official ifo about this problem. Only solution for now - roll back for ACR 6.5 - or beta 7.0 in Lightroom new

• Tecra 8200 screen goes black when I use the battery

  When I use my laptop Tecra 8200 with (new) battery, light falls down on the screen, making it almost impossible to work with. I use windows XP. I have havn´t found all the settings to adjust it - anyone know what to do?

  Appreciate the help!
  Peter

  Hello

  On the Toshiba driver European page you will find the Toshiba Power Saver for Windows XP this time that it s a 4.05.00 version

  You can find it in the Archive-> Tecra-Tecra 8xxx--> Tecra 8200-> PT820E-> Power Saver >

  Welcome them

• Cursor randomly freezes and jumps to life on Tecra 8200 with Win XP

  Tecra 8200 with Win XP Professional

  The cursor randomly freezes and jumps to life after a few seconds, very rarely, I have to re - start.
  This happens as well with the mouse of keyboard or mouse remotely.

  Hope someone can help because it's driving crazy me.

  See you soon
  Matt

  I agree with Akuma. Disable the internal mouse and external use only. I have old Tecra M1 with the same keyboard and in my case the problem was faulty Acupoint placed on the keyboard.

  With the new keyboard, everything was OK again.
  I recommend you to disable the mouse of the computer laptop and external use only.

• My Tecra 8200 is stop/freezing sometimes

  Hi @all!

  My Tecra 8200 laptop runs with Windows XP.
  Problem is that it freezes, which means that it does not react to the keyboard and the mouse is blocked for a minute or 2. I tried to delete any powercontrols and installed "Speedfan" to cool components, but nothing did. The tech Support told me to change a setting in the bios. Let the OS set up components, and then reinstall the operating system. It did not help.

  I would be gratefull for any suggestions.

  THX in advance,

  Michael

  Hi Michael

  you say that the keyboard and the mouse is stuck for a minute or 2. This means that they continue to function normally after that? Or are you to shut down and turn it on to make it work again?

  Alternatively, you can try to reload the OS with Restore tool! You can find accesssories!

  BR

  Tom

• Win 7 freezes or crashes when moving or copying a file

  Original title: win 7 freezes or crashes when moving or copying from the inside on a file on the hard drive

  Win 7 freezes or crashes when you move or copy the hard drive of the Interior on a file

  Hey Carlos,.

  Check the logs in Event Viewer for any error message when the computer freezes or crashes followed.  See the option of application event (program) for any error message.

  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

  A few things here, you can try and see if it makes a difference.

  1 increase the size of the virtual memory according to the steps in http://windows.microsoft.com/en-in/windows7/change-the-size-of-virtual-memory

  2. run the disk check to make sure that the readers have any errors.

  http://Windows.Microsoft.com/en-in/Windows7/check-a-drive-for-errors

  Note: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data could be lost

  3. run Disk Defragmenter.

  http://Windows.Microsoft.com/en-in/Windows7/improve-performance-by-defragmenting-your-hard-disk

  4 delete the temporary files on the computer.

  http://Windows.Microsoft.com/en-in/Windows7/delete-files-using-disk-cleanup

  5. start a virus on the computer scan to make sure that the computer is virus-free.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss

  If none of the help above, then put the computer in a State of boot is a way to check if there is any third party service or program that is causing this issue.

  6 put the computer in a clean boot

  http://support.Microsoft.com/kb/331796

  "Note: when finished troubleshooting, turn the computer back to the normal state by following the steps described in" how to regain a normal Windows startup mode.

  Browse http://windows.microsoft.com/en-in/windows7/optimize-windows-7-for-better-performance to optimize Windows 7 for better performance.

  Let us know if the troubleshooting steps to help you.

• Where can I download drivers and manual for Tecra 8200

  Where can I download the drivers and the manual for a TECRA 8200 (PIII 900/128/20 / CD)

  Take a look at this Toshiba European website:
  http://EU.computers.Toshiba-Europe.com

  You will find a support home page that contains links to the drivers and manuals.
  Then you must choose the * ARCHIVES * in download form!
  This unit is an oldie and so all the manuals and drivers have been moved to the archives.

  Good bye

• Tecra 8200 Boot and install os!

  I have a tecra 8200, cd player no longer works, so I bought a new... The floppy driver has also been broken, but I just bought a new floppy driver external usb. Everything works fine on windows, but I want to reinstall my OS, but I can't boot from the external floppy drive or a cd player... How can I solve this problem? I edited my bios to boot from the floppy drive, cdrom and HDD, but it does not start, the cd is bootable etc... How can I solve this?

  Hey,.

  When you have changed the former in an ew reader, what was the same model or a better? As SD-R2002 or
  DVD PA3014E-1DVD player Kit
  PA3015U-1CDD 24 x CD-ROM Drive Kit II
  PA3068U - 1 CD 1 CD-R/RW Drive Kit
  PA3073E - 1 CD 2 CD-RW/DVD-ROM Drive Kit

  These disk are supported by the Tecra 8200 series. Another Selcet Bay drive can also adapt!

  It can also help to do a BIOS update unless the old one was not installed!

  Goodbye, TOK

• Control the brightness of the LCD on Tecra 8200

  My Tecra 8200 PT820E, at some point, has been formatted less Tosh. control software. Book of hand says go to the Panel control/power economy and alter the screen brightness it. Which does not exist on my machine.

  The problem is when on battery, brightness level falls to a level that is unreadable. Is there another way to increase the brightness level?

  Thank you.

  You can do this very easily using FN + F7 to raise the brightness level.
  And I think that it is supposed to be the Toshiba Power Saver to look for this option.

  This small utility can manage the behavior of the energy saving modes, and there is an option how display is obscured.