Tecra 8200 - run XP ok?
I have an old 8200 with 256K of RAM - he has been of pentium III x 86 family 6 model 10 stepping 8
What is this chip?
It will run ok in XP?
Jonnny
Hello
As far as I know, this unit came with 4 different processors.
PIII-M (Mobile) 750 MHz;
PIII-M (Mobile) 850 MHz;
PIII-M (Mobile) 900 MHz;
PIII-M (Mobile) 1.0GHz
In addition you can upgrade the RAM to 512 MB max.
If you want to use Windows XP for your device should a min. 256 MB memory.
Tags: Toshiba
Similar Questions
-
Tecra 8200: flicker of brightness of the screen on the use of the battery
I have a Tecra 8200 running Windows 2000 Pro. The problem is with the brightness of the screen flashes intermittently, all a few minutes when it's on battery. The Toshiba power saver utility seems to work OK. his answer seems to depend on remaining battery life, that is to say less than 50% there is no difference between 'normal' and 'long life' with regard to the brightness of the screen.
Superior to 50% there is no difference between 'normal' and 'high power '. There is no problem at all when running on the current.Recently, I changed the battery; the original was a PA3062U-1 bar, but the news is a PA3062U-1BAT. Can that be a problem?
Hello
The new battery is the right specification for this model of computer Tecra laptop and on I think that the battery cannot be responsible for this.
If you try what Tom suggested it please let us know about the results.
-
Tecra 8200 built in WiFi Lucent
I have a Tecra 8200 running Windows 2000. I ran all the latest news from the BONE. I put the built in Wifi Lucent card and can communicate Ad Hoc with an another toshiba laptop with a wireless Belkin 54 g card. After a few minutes of inactivity, the Tecra 8200 can no longer access the remote computer. The only way to regain access is to the computer remote ping of the IP address of the 8200.I have had the same problem with several remote machines and several cards from Belkin, so I suspect now that the problem lies in the Tecra 8200.Can someone help?
Hello
Do you use the Toshiba Toshiba Wireless LAN Client Manager and Wireless LAN Client Manager to set up peer-to-peer connection?
-
No sound from Port Replicator NetDock after installing XP on Tecra 8200
After a recent accident, I re-installed my 8200 using XP SP2. Now I have no sound from the Netdock. All other functions of the DS seem to be OK.
I downloaded the latest drivers Yamaha for XP SP2, but still no sound.I get no option to change analog output on the control panel of Yamaha. Device Manager lists system Yamaha DS + XG Legacy Sound (WDM) and Yamaha DS - XG PCI Audio Codec (WDM) as well as other codecs, gane and multimedia control device port.
I want to get her back through the Netdock.
Thank you
Pete
[Edited by: admin August 10 05 19:30]
Hello Pete
One of my friends has a Tecra 8200 running Windows XP Home edition, but SP1and everything works correctly. I really don' t understand why the its doesn't work.
Sorry, but this unit is not supported for Windows XP Home edition, and it is not easy to say why the Board its doesn't work properly. If all goes well, another forum user has more experience.
Good luck!
-
WiFi on Tecra 8200 after installing XP SP2
I am running XP service pack 2 on a Tecra 8200.
The problem is that the wireless card cannot detect any wireless router.
I use a belkin G wireless router and it works, checked with another pc with a wireless card.However the toshiba wireless client shows no wireless network, the router or another computer.
I have the antenna turn on and how to configure a wireless connection.
I tried the old drivers and tried a number of drivers out of this site and others.
But I had still not everything yet, does anyone else have this problem or a solution to this problem
Hello
If you use a client for a WLAN connection WLAN Windows settings SHOULD be disabled. Please check under properties network connection Wireless wireless networks tab.
There is an option called use Windows to configure my wireless network. This option SHOULD be disabled (without hook).
Good bye
-
Tecra 8200 - works very well under Windows 98SE, but not on Windows 2000
Hello
I've updated my Tecra 8200 for Windows 98SE and Windows 2000.
Windows 98SE, wireless connection works very well and I was able to access the internet through my SMC Barricade router.
But on Windows 2000, this no longer works.
The connection to the router is ok, but I am unable to connect to the internet or to the page web administration of the router.
The Toshiba Wireless Client Manager provides the following information:
Status:
------
Connected to the network: SMC
Connection: Excellent
Access Point name:
Channels: 2
Encryption: on----------- Warning ----------------
Impossible to communicate with the AP.
Please check the encryption and IRQ.Yet once, I insist on the fact that under Windows 98SE, everything worked well... an hour ago...
I am running Windows 2000 SP4 with the latest updates.
Could someone help?Thank you
François
Hello
Thanks for the solution. I hope that the installation of Windows 2000 Service Pack 1 helped.
Good bye
-
My Tecra 8200 is stop/freezing sometimes
Hi @all!
My Tecra 8200 laptop runs with Windows XP.
Problem is that it freezes, which means that it does not react to the keyboard and the mouse is blocked for a minute or 2. I tried to delete any powercontrols and installed "Speedfan" to cool components, but nothing did. The tech Support told me to change a setting in the bios. Let the OS set up components, and then reinstall the operating system. It did not help.I would be gratefull for any suggestions.
THX in advance,
Michael
Hi Michael
you say that the keyboard and the mouse is stuck for a minute or 2. This means that they continue to function normally after that? Or are you to shut down and turn it on to make it work again?
Alternatively, you can try to reload the OS with Restore tool! You can find accesssories!
BR
Tom
-
Tecra 8200: If I use the moniter decrease brightness battery power
I have a laptop Toshiba tecra 8200, when I use it on battery moniter decrease brightness, I tried to adjust the power to the control panel settings, but there is no option for brightness (win xp)? anyone has idea how to adjust the brightness on battery?
Hello
If I remember right you can set the brightness of the display by saving settings. Please start Toshiba Power saver. Check the part runs on batteries. There must be some NORMAL called marker profile. Click details, and then click standby power mode tab.
There monitor the brightness option. All the four options set at the maximum level. Now when you use your laptop on battery power the brightness of the monitor will be defined to the maximum level.
Please test.
-
Tecra 8200: After SP2 computer laptop installation keeps rebooting
Hello.
I am running Windows XP Pro in my Tecra 8200 and decided to install SP2 (oh error) now, whenever I turn it on I go as far as a blue screen with the following message
STOP: c0000135 {Unable to locate component}
This application has failed to start because winsrv was not found. Reinstalling the application may fix this problem.After my laptop keeps restarting - boots - blue screen again. I have tried everything to connect to windows to uninstall SP2, but I can not connect.
I tried to change the boot sequence (some ppl said that it was starting in LAN), I disabled the CPU Cache and L2 in the BIOS and still nothing. If I turn off reset on the failure of the system (as some other guy suggested) I just can't not anywhere either.Unfortunately, I do not have the boot floppies so I can not format the laptop.
Now I know why that is happening, but the answers I get is to uninstall SP2, update the Bios, or to download patches, but I can't make one any of them because I can't get into windows, even in safe mode.
Someone at - it ideas?
Hi Hector.
If you cannot start in safe mode, and then unfortunately mode your only real option is to reinstall your operating system to the original recovery disks.
I think something went wrong during the installation of SP2 and this has led to the corruption of one or more of your system files.
I also recommend that you take a full backup of your system before attempting to do a re-installation of SP2 so that you do not have to depend on start-up in Windows to regulate if necessary.
Personally I take a picture full backup to an external hard drive using Norton Ghost before applying any big maintenance work on my own laptop.
HTH
-
Cannot access TSetup on my Tecra 8200
I replaced the first installation of Win98 to WinXP Pro on my Tecra 8200. Now I am unable to access the TSetup. I tried to reinstall the original win98 since the restore cd, but the CD will not run.
I need to access the TSetup to activate the correct for S-video settings so that I can see my pictures stored on my TV.
What can I do to access renewable TSetup?
Hello, since a few days, I have a Tecra 8100.
Try the following:
Turn off the laptop
Press ESC and switch it onAfter seeing the TOSHIBA sign, you can press ESC.
Order to press F1
The you if everything is fine in the BIOS without the Setup program that is also mentioned in my textbook, but is not on the computer.
Best regards
Hans-Walter
DL9LBH -
Tecra 8200: How to get the WPA encryption?
How can I get wpa running on my tecra 8200. I installed Windows XP SP2, but it still doesn't work.
Where can I download an update of the firmware of WLAN card because it's my last hope...
Hello
It depends on the properties of material WLan if you use WPA encryption option.
You cannot enable this feature by updating the BIOS or the installation of SP2.
As far as I know, this wireless network card supports only WEP, but not a WPA encryption. -
Where can I download drivers and manual for Tecra 8200
Where can I download the drivers and the manual for a TECRA 8200 (PIII 900/128/20 / CD)
Take a look at this Toshiba European website:
http://EU.computers.Toshiba-Europe.comYou will find a support home page that contains links to the drivers and manuals.
Then you must choose the * ARCHIVES * in download form!
This unit is an oldie and so all the manuals and drivers have been moved to the archives.Good bye
-
Tecra 8200 screen goes black when I use the battery
When I use my laptop Tecra 8200 with (new) battery, light falls down on the screen, making it almost impossible to work with. I use windows XP. I have havn´t found all the settings to adjust it - anyone know what to do?
Appreciate the help!
PeterHello
On the Toshiba driver European page you will find the Toshiba Power Saver for Windows XP this time that it s a 4.05.00 version
You can find it in the Archive-> Tecra-Tecra 8xxx--> Tecra 8200-> PT820E-> Power Saver >
Welcome them
-
Tecra 8200 - what computer laptop model number should I?
All top
Can someone tell me how do I know what model I have? I try to download the drivers for my computer, but am not sure which series / model it is.I have the following information on the basis of the machine:
TOSIBA Tecra 8200
Model No.: PT820E-05WQT-E
Serial No.: 61276516 G ST820-0It is a Pentium 3 machine, but is - this one: has / M / R / S series? So what model to choose after that please?
Thank you.
Your Tecra is simply Tecra 8200 and there is no other model number.
Download the drivers, you can find on Toshiba page under http://eu.computers.toshiba-europe.com > support & downloads but under product type, you must choose option ARCHIVE.You will then find option for Tecra 8200.
Good luck!
-
Tecra 8200 Boot and install os!
I have a tecra 8200, cd player no longer works, so I bought a new... The floppy driver has also been broken, but I just bought a new floppy driver external usb. Everything works fine on windows, but I want to reinstall my OS, but I can't boot from the external floppy drive or a cd player... How can I solve this problem? I edited my bios to boot from the floppy drive, cdrom and HDD, but it does not start, the cd is bootable etc... How can I solve this?
Hey,.
When you have changed the former in an ew reader, what was the same model or a better? As SD-R2002 or
DVD PA3014E-1DVD player Kit
PA3015U-1CDD 24 x CD-ROM Drive Kit II
PA3068U - 1 CD 1 CD-R/RW Drive Kit
PA3073E - 1 CD 2 CD-RW/DVD-ROM Drive KitThese disk are supported by the Tecra 8200 series. Another Selcet Bay drive can also adapt!
It can also help to do a BIOS update unless the old one was not installed!
Goodbye, TOK
Maybe you are looking for
-
Is it possible to run Windows 7 on Tecra S1 PT831E
Hello is it possible to run Windows 7 on my Tecra S1 PT831E 126PQ? I've updated the BIOS (last?) version 2.50 (it should be suitable also for Windows 7). With this done BIOS is fully compliant with ACPI? Checking with Windows 7 Upgrade Advisor should
-
So I just got a new laptop HP Envy. I've set up and it worked fine the first hours I have connected and used my bluetooth mouse. McAfee ended up going and it's by resetting the computer (I don't know why this shit is preinstalled). Anyway, the laptop
-
I bought the printer M277 today. Im trying to download the drivers for my Mac. I downloaded the HP Easystart program. It goes to the point where its driver (v4.0.0.32, 148 mb) download. Then, he begins the dwnload but he cancels with the error "Pleas
-
Can't detect the wireless, gateway 4025gz. mod, turn on wireless, Dosnt show the icon in the login screen. OK before wipjng drive.
-
History of connection CMF - how far back is the average
Hi Folks, interested to hear how far back in time connection events are able to go? With a virtual FMC in production for 2 months with the maximum managed hosts and default settings, we went quickly up to 24 hours. That is to say, we couldn't get in