Tecra 8200 wireless issue

Well, this is probably a stupid question, but I have a Tecra 8200.
I have to buy something else for wireless work?

Hello

This question is not stupid ;) as the Tecra 8200 was equipped as an option with the LAN card internal minPCI. This could be a bit confusing.
So in some units of Tecra 8200 WLan is already included in some Tecra s minPCI WLan card must be installed first to use WLan technology.

You should check your device manager if a WLan module is listed in the network adepter
If it s already registered then you n t need a WLan card.
If it s are not, then you must upgrade the machine with the minPCI wireless network card or with a USB WiFi key.

AFAIK the PA3070U-1MPC wireless mini-PCI card may be compatible with your laptop.

Tags: Toshiba

Similar Questions

  • Cannot connect Tecra 8200 wireless network

    I have an old laptop Tecra 8200, I recently bought a wireless router but I can't get the laptop to connect to it.
    He sees the network and attempts to connect to it, but after a few minutes it stops and returns looking for available wireless networks.
    The laptop uses windows XP with service pack 2.
    Everything on the laptop is standard and I did no improvement to him so there the standard network card. I don't know if this is the problem and that is that I'm not sure what network card enough.

    What card Wlan do you use?
    Check Wlan card details in the Device Manager.

    Looks a bit a problem of compatibility between the wireless network card and router.
    Please make sure that your wireless network card uses the same Wlan standard IE. 802 11 B G etc. as the Wlan router.

    What you could do is update the Wlan driver too.

  • Tecra 8200 - no finding wireless networks?

    Hi all, a n

    Symptoms are as follows,

    (1) Tecra 8200 with a detected Toshiba Wireless Mini Pci Card
    (2) a belkin 54 g wireless router
    (3) a belkin 54 g wireless bridge
    (4) a portable detached with a map of pcmi belkin 54 g

    to try to find wireless networks it does not find

    If I put the card of pcmi belkin in lappy everything works fine

    OS: winxp sp2

    all drivers are in the form of windows found installed n such that it is impossible to find any XP wlan readers n utils on the support site

    I see not all ideas

    any aid must be good help

    Hello

    First that I want to mention that this device is not supported for Windows XP Home edition and it is reason why you can't find driver Wireless Windows XP Home edition for this device. Please check the BIOS settings. You will find an option called device configuration. Switch to the installer of the OS.

    Do you use client or windows for configuring wireless settings?

  • Not able to install the wireless adapter built on Tecra 8200

    Hi all

    I have a Tecra 8200

    After you have installed Windows XP Pro, the wireless adapter will be found as PCMCIA MTD-0002.

    I cannot install the drivers for the card of m.

    XP is SP2
    BIOS is 1.60

    Could someone help me what to do, thanks in advance.

    Brgds,

    Thomas

    Hello

    If you have the card WLAN MiniPCI Agere, the system needs to install the following registry key with the WLAN card driver:
    [HKEY_LOCAL_MACHINE es\Pcmcia\Parameters]
    "IrqRouteToPciController" = dword:00000006

    I found a statement of installation:

    1. new installation of Windows XP Service Pack 2 package
    or clean install Windows XP Gold package and install Service Pack 2 update image on it.
    2 copy the TICardBusIrqRouting.reg on the system, and then click the file on the system.
    3. the following window will appear,
    "Are you sure that you want to add the information in xxxxx\DISABL ~ 1.REG in the registry.
    Then select "Yes".
    xxxxx is the location of TICardBusIrqRouting.reg
    4. the next window will appear,
    "Information in xxxxx\DISABL ~ 1.REG have been entered in the register."
    Then click on 'OK '.
    xxxxx is the location of TICardBusIrqRouting.reg
    5 restart the system

    Good luck!
    Good bye

  • WiFi on Tecra 8200 after installing XP SP2

    I am running XP service pack 2 on a Tecra 8200.
    The problem is that the wireless card cannot detect any wireless router.
    I use a belkin G wireless router and it works, checked with another pc with a wireless card.

    However the toshiba wireless client shows no wireless network, the router or another computer.

    I have the antenna turn on and how to configure a wireless connection.

    I tried the old drivers and tried a number of drivers out of this site and others.

    But I had still not everything yet, does anyone else have this problem or a solution to this problem

    Hello

    If you use a client for a WLAN connection WLAN Windows settings SHOULD be disabled. Please check under properties network connection Wireless wireless networks tab.

    There is an option called use Windows to configure my wireless network. This option SHOULD be disabled (without hook).

    Good bye

  • Tecra 8200: I can not install Wlan for XP driver

    Hello
    I can't find the driver for windows xp wireless. I have Tecra 8200. I try to install a large number of drivers from the official page of Toshiba Tecra 8200 for but the drivers do not work.
    If anyone knows how I can install wireless in my tecra 8200, let me know.

    Hello

    First of all, I want to say it's the Tecra 8200 has not been delivered with Windows XP and you will find not all Wlan for XP drivers on the Toshiba site.
    I checked and there are only drivers for W2k, NT and W98SE.

    But as far as I know the device was shipped with the standard ORiNOCO specification Wlan miniPCI Wireless LAN Card: 802. 11 b
    In this case, I recommend looking on the net for these drivers.

    Unfortunately, that's all I can suggest.

  • Tecra 8200 - works very well under Windows 98SE, but not on Windows 2000

    Hello

    I've updated my Tecra 8200 for Windows 98SE and Windows 2000.
    Windows 98SE, wireless connection works very well and I was able to access the internet through my SMC Barricade router.
    But on Windows 2000, this no longer works.
    The connection to the router is ok, but I am unable to connect to the internet or to the page web administration of the router.
    The Toshiba Wireless Client Manager provides the following information:
    Status:
    ------
    Connected to the network: SMC
    Connection: Excellent
    Access Point name:
    Channels: 2
    Encryption: on

    ----------- Warning ----------------
    Impossible to communicate with the AP.
    Please check the encryption and IRQ.

    Yet once, I insist on the fact that under Windows 98SE, everything worked well... an hour ago...

    I am running Windows 2000 SP4 with the latest updates.
    Could someone help?

    Thank you

    François

    Hello

    Thanks for the solution. I hope that the installation of Windows 2000 Service Pack 1 helped.

    Good bye

  • Tecra 8200 built in WiFi Lucent

    I have a Tecra 8200 running Windows 2000. I ran all the latest news from the BONE. I put the built in Wifi Lucent card and can communicate Ad Hoc with an another toshiba laptop with a wireless Belkin 54 g card. After a few minutes of inactivity, the Tecra 8200 can no longer access the remote computer. The only way to regain access is to the computer remote ping of the IP address of the 8200.I have had the same problem with several remote machines and several cards from Belkin, so I suspect now that the problem lies in the Tecra 8200.Can someone help?

    Hello

    Do you use the Toshiba Toshiba Wireless LAN Client Manager and Wireless LAN Client Manager to set up peer-to-peer connection?

  • Tecra 8200 to format HARD drive - how to install windows?

    Hello

    I bought a Tecra 8200 used with a formatted hard drive, when I put the original cd of Windows 2000 in the cd player, nothing happens, how do I get Windows installed?

    When I turn on the power, he said something about the dos mode and then it displays the date and time and after that nothing happens.

    I hope someone can help me!

    Thank you!

    Hello

    It seems that the machine can boot from the cd rom t.
    Please check in the BIOS if the CD rom is recognized.
    Also if you have installed the original W2k OS of this device it of necessary to install driver in the following order:

    Driver Chipset
    Video driver
    Audio driver
    Common modules
    Energy-saving
    Toshiba Utilities
    Mobile extensions
    Internal Modem driver
    Infrared driver
    The mouse driver
    LAN driver
    Wireless LAN driver
    Toshiba Client Manager
    Toshiba network device switch
    Microsoft updates / QFE
    Extended IDE controller driver

    Good bye

  • Tecra 8200: How to get the WPA encryption?

    How can I get wpa running on my tecra 8200. I installed Windows XP SP2, but it still doesn't work.

    Where can I download an update of the firmware of WLAN card because it's my last hope...

    Hello

    It depends on the properties of material WLan if you use WPA encryption option.
    You cannot enable this feature by updating the BIOS or the installation of SP2.
    As far as I know, this wireless network card supports only WEP, but not a WPA encryption.

  • Tecra 8200: Wifi and LAN Manager client problem Win2k Pro

    Hello

    I just install win 2000 pro on an old Tecra 8200.

    The "LAN client manager" says that I'm connected to the wireless access point but windows icon indicate that the wire is cut.
    Is there anyone know how to fix this?

    Thank you.

    PS: I get the latest software and driver on Toshiba website and the wifi switch power switch is turned on.

    Wait a minute: you can use WLAN or not? You are just irritated because of this icon of windows or what?

  • Tecra 8200 and Win Xp

    Hello

    I just installed WinXp on my Tecra, because I was not able to use an external USB HARD drive. So far so good
    but now, I have some problems with my wireless card und the notebokk tells me every time you start, I need "Toshiba common Module" for my select bay.
    Someone at - he of the experience with a Tecra 8220 and WinXP.
    Thanks for your help.

    Blunma

    Sorry for my writing is not very well English, my normally preferred language is German. So long.

    Some information more than my Tecra 8200:
    -PIII 850
    -384 MB of Ram
    -Windows XP SP1 (I don't have confidence in SP2 so far.)
    -Installation of WinXP was an update on Windows 2000 SP4

    Hi Mario

    I guess you need the common Modules. It is a special Toshiba driver you have to install first.
    This driver, you can find on the delivered tools & utility CD or on the official website of Toshiba. Note: There are different drivers for Xp or Win2000.

    Good bye

  • Where can I download drivers and manual for Tecra 8200

    Where can I download the drivers and the manual for a TECRA 8200 (PIII 900/128/20 / CD)

    Take a look at this Toshiba European website:
    http://EU.computers.Toshiba-Europe.com

    You will find a support home page that contains links to the drivers and manuals.
    Then you must choose the * ARCHIVES * in download form!
    This unit is an oldie and so all the manuals and drivers have been moved to the archives.

    Good bye

  • Tecra 8200 screen goes black when I use the battery

    When I use my laptop Tecra 8200 with (new) battery, light falls down on the screen, making it almost impossible to work with. I use windows XP. I have havn´t found all the settings to adjust it - anyone know what to do?

    Appreciate the help!
    Peter

    Hello

    On the Toshiba driver European page you will find the Toshiba Power Saver for Windows XP this time that it s a 4.05.00 version

    You can find it in the Archive-> Tecra-Tecra 8xxx--> Tecra 8200-> PT820E-> Power Saver >

    Welcome them

  • Tecra 8200 - what computer laptop model number should I?

    All top
    Can someone tell me how do I know what model I have? I try to download the drivers for my computer, but am not sure which series / model it is.

    I have the following information on the basis of the machine:

    TOSIBA Tecra 8200
    Model No.: PT820E-05WQT-E
    Serial No.: 61276516 G ST820-0

    It is a Pentium 3 machine, but is - this one: has / M / R / S series? So what model to choose after that please?

    Thank you.

    Your Tecra is simply Tecra 8200 and there is no other model number.
    Download the drivers, you can find on Toshiba page under http://eu.computers.toshiba-europe.com > support & downloads but under product type, you must choose option ARCHIVE.

    You will then find option for Tecra 8200.

    Good luck!

Maybe you are looking for

  • Unable to activate the Windows 98 operating system.

    NEED TO ACTIVATE a GATEWAY WINDOWS 98 os I have a vintage computer laptop gateway 1998, and I need to reload the operating system.  Microsoft won't activate and gateway can restore disks not power gateway.  What should I do?  is there a product key g

  • Error in Win32 generic host process in SP3, no sound

    Ive spent a bit of time to research this on the way to fix it with nothing doesn't. Most of the 'fixes' are for SP2 but nothing for SP3. Has anyone found any patches for this yet? Please, im tired of this... - Aaron

  • Windows 7 starter edition will not burn DVD and will not format

    My recorder DVD format player, will play and burn DVDs when I move my dvd drive to another computer running windows vista It will not burn a dvd or format a dvd rw disc when it is attached to my netbook toshiba running windows starter 7

  • Can I retrieve my product key?

    The sticker on the bottom is completely worn out. I tried Magic Jelly bean, but I get the C004E003 error code when you try to activate. So, is there anyway to get my actual key, I guess it's that bad? There is a recovery on my disk partition but it's

  • Are not sent to the printer by default, asks me to save in PDF format

    Everytime I go to print a Web page, the print menu comes upward and instead list the default printer first, he asks me for sure the Web page in PDF format. How can I get this back to where it displays the default printer as the only option I have?