Tecra 8200 - works very well under Windows 98SE, but not on Windows 2000

Hello

I've updated my Tecra 8200 for Windows 98SE and Windows 2000.
Windows 98SE, wireless connection works very well and I was able to access the internet through my SMC Barricade router.
But on Windows 2000, this no longer works.
The connection to the router is ok, but I am unable to connect to the internet or to the page web administration of the router.
The Toshiba Wireless Client Manager provides the following information:
Status:
------
Connected to the network: SMC
Connection: Excellent
Access Point name:
Channels: 2
Encryption: on

----------- Warning ----------------
Impossible to communicate with the AP.
Please check the encryption and IRQ.

Yet once, I insist on the fact that under Windows 98SE, everything worked well... an hour ago...

I am running Windows 2000 SP4 with the latest updates.
Could someone help?

Thank you

François

Hello

Thanks for the solution. I hope that the installation of Windows 2000 Service Pack 1 helped.

Good bye

Tags: Toshiba

Similar Questions

  • I upgraded my laptop to windows 8 unfortunately Shamela library doesn't is not display Arabic titled correctly. I must say it worked very well under windows 7, what should I do?

    I upgraded my laptop Toshipa from windows 7 to windows 8, library Shamela worked very well under windows 7, now after the library Shamela upgrade does not work properly and the titles are written in the language of gibberish. Any solution please

    Are you referring to a custom library that you created?

    If you are, try to remove the library then re-create and see whether or not it appears correctly.

  • works very well on the shell, but not via cron

    Hello

    the ghettoVCB works pretty well on my vShpere 4.1 Standard Server run from console. My setup looks like this:

    vms2backup.conf: listed three VMs to backup

    I have a config file for each virtual machine. That looks like this:

    VM_BACKUP_VOLUME = / vmfs/volumes/VMBackup
    DISK_BACKUP_FORMAT = thin
    VM_BACKUP_ROTATION_COUNT = 3
    POWER_VM_DOWN_BEFORE_BACKUP = 0
    ENABLE_HARD_POWER_OFF = 0
    ITER_TO_WAIT_SHUTDOWN = 3
    POWER_DOWN_TIMEOUT = 5
    ENABLE_COMPRESSION = 0
    ADAPTER_FORMAT = ide
    VM_SNAPSHOT_MEMORY = 0
    VM_SNAPSHOT_QUIESCE = 0
    ENABLE_NON_PERSISTENT_NFS = 0
    UNMOUNT_NFS = 0
    NFS_SERVER = 172.30.0.195
    NFS_MOUNT = / nfsshare
    NFS_LOCAL_NAME = nfs_storage_backup
    NFS_VM_BACKUP_DIR = MyBackups
    SNAPSHOT_TIMEOUT = 15
    EMAIL_LOG = 1
    EMAIL_DEBUG = 1
    EMAIL_SERVER = mail.domain.com
    EMAIL_SERVER_PORT = 25
    [email protected]
    [email protected]

    The NFS part is not necessary.

    I start backing up shell like this: /ghettoVCB/ghettoVCB.sh f /ghettoVCB/vms2backup.conf-l /ghettoVCB/backup.log

    When from the backup of shell as mentioned above, everything works fine. In the end, I get an autoresponder email.

    But now, when I call this script with the same syntax via crontab, only the first two servers when saved and the script stops until the number of rotation shall take effect from the second server. If the third server is not saved and no e-mail is created.

    I have no idea until the problem could be. The hard disk is not full.

    Any ideas?

    Regards Wolfgang

    You can proceed as follows, re - run the script via cron but in your crontab entry, have it configured as follows, where you hit an error that is not connected:

    /ghettoVCB/ghettoVCB.sh f /ghettoVCB/vms2backup.conf-l /ghettoVCB/backup.log d debug - c /ghettoVCB > /ghettoVCB/ghettoDebug.txt

    It will redirect all the outputs generated during the race in /ghettoVCB/ghettoDebug.txt and see if there are errors.

  • Installation of Windows 7 works very well in analog mode, but not DVI mode

    I tried to install Windows 7 with the DVI cable is connected and when I get to the first reboot the screen is black and the installation will stop.  When I use a cable analog VGA instead of DVI installation cable is completed.  Why would using VGA and DVI not working.  It seems that if you have the possibility to use a cable two should work even. Any ideas?

    It is probably a quirk of the type of graphics card you have, fortunately, some cards can work outside either port with standard VGA drivers, but some lower end cards will not output unless the appropriate drivers are installed. (Some lower end cards can also have doubles outings, but can use 1 at a time, not in dualview)

  • 2nd WVC54GCA works very well on the LAN, but I don't see it on the internet

    I recently bought a 2nd camera, so I can remotely monitor the 2 places home. The first camera that I put in place with the other default values that address static ip, I gave him, shipped port port 80 and when I type in my dynamic dns name like "http://myname.dyndns.org:80" it works very well, in fact I have same need to type the port number and it works. The dynamic dns used to take me direct to my configuration of routers (WRT54GL) but now I just type in: 8080 to the end to get to the configuration of the router to the internet. In any case, it works well and I can take pictures, live video monitor, movement detected email snaps etc. without any problem.

    Then I bought a 2nd WVC54GCA and together to the top of the same thing, he has assigned a static IP address and on the options page I activated the replacement web access port and left port 1024, port forwarded in the router with the new ip address and the port etc.  I can access the camera very well via a browser on my local network using the ip address: 1024 or the 'myname.dyndns.org:1024', but I can't access the cam 2nd via the net now. I am confused at this point, I didn't know that a second dynamic dns would be necessary since the device is configured to use a different port, and when I try using the ip address: 1024 it makes no difference anyway.

    Am I missing something here?

    What I thought was the problem wasn't, I had my port of port of port forwarding on the same number, and when you set the parameter port internal address port forwarding port, which is 80 in the case of the linksys cam.

    Once again that I realized that however, 1024 still wouldn't work, so I changed it to 8081 since my routers gui port is 8080, and I had to change the port setting to 81 in port forwarding and add: 81 to my dns address for it to work.

    Linksys should be ignored during the first 80 or some thing, or perhaps 80 is the default, because before when I wanted to join my router gui all outdoor I had was my dnyamic dns name without the: 8080, and when I added a cam to the network it would go directly to the cam, unless I specifically set : 8080 to the end.

    In any case, I have now the two cams work and accessible. For what it's worth, if there are people from linksys playback of this member of the Board they are terrible docco to explain things, the monitoring software is buggy as all get out and if I struggled as a computer scientist looks at work then the average schmoe stands little or no chance...

    My $.02

  • F4580 works very well from the laptop but when I try to print something from mobile internet is blurry?

    Have run the HP Diagnostic print comes very well, very good copy.  The only problem is when I try to print something on the internet and then it's so blurry that it's barely readable.

    Hello Ann,.

    Allow me to quickly gather information about the issue in order to guide you in the right direction.

    1. what version of Windows is installed on the computer?

    2. what web browser do you use to print from the internet?

    3A this works much earlier?

    4 have have there been recent changes made on the computer before the show?

    I suggest you to refer to the links and check if it helps.

    Problems printing from the Internet

    I can't print or preview before printing a Web page in Internet Explorer

    Printing webpages: frequently asked questions

    Please post back with the results and we will be happy to help you further.

  • plays very well on the rocket, but not on windows support

    I borrowed a CD from a friend of mine and downloaded music on WM then I sync them with my rocket. The problem I have is that when I try to play music of WM I get 'no sync rights' and when I play music from my rocket they play very well. can someone help me with this problem

    Thank you.

  • I have a legacy program back that I always use and worked very well under XP but will open in a small window in windows 7?

    How can I get an old Dos program open in its entirety using a pif file that I used to XP

    Hello Grc7,

    Welcome to the Microsoft Answers Forum!

    Surely you can open back fullscreen program in windows 7. To do this, please follow the steps below.

    1. Click Start on the desktop, in the Find box type cmd.

    2. Open command prompt.

    3. right click on command prompt on the taskbar, and select Properties.

    4. choose full screen under display options, or give the custom window size in the Layout tab.

    I hope this information helps. Please get back to us if you have any other questions on this subject.

    Thanks and greetings
    Mir - Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Y470 Slow/stuttering when games - Windows 8... Was very well under Windows 7

    I think it's because of the power management Lenovo does not work properly. I can't set the fan to the effective heat dissipation so causing the CPU/GPU to reduce, producing stutters in games and even Web sites that have a high flash content.

    Is there any solution for this? I tried to remove the Lenovo power management and it did not work. I installed the version of Windows 8 on the Lenovo Site. I noticed that the fan mode button does not work when I press it. He however flash up and down every few seconds.

    Thoughts?


  • Dell Inspiron Fingertapps/Touchzone does not work very well under Vista

    Fingertapps /Touchzone on my new Insipiron Dell ceased to function fully. I tried to download the latest version of Dell, but this has not fixed this problem.

    The Fingertapps in on my new Insipiron Dell Touchzone ceased to function fully.  I tried to download the latest version of Dell, but this has not fixed this problem.

    You must contact the Support Technology Guide for assistance with these products at:http://support.dell.com/support/index.aspx?c=us&l=en&s=dhs.  As this is a new Dell computer, it will still be under warranty and they will be more than happy to help you.  We know nothing about the function of these programs or how to fix therm (or at least in my case, even what they're doing and I have a Dell).

    I'm sure that they that they can help you get this installed and working properly.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I have windows XP (SP3). Office 2000 works very well. I just Windows7. Support Office 2000 - no errors - Word does not. What should I do? (I tried to tell new machine to be "consistent", but did not work.

    What should I do to get Office 2000 to work with Windows7?

    Officially only Office 2003 and newer are supported and are supposed to work with Windows 7. But still, it is surprising that it won't work for you. Did you try to uninstall and reinstall?

  • EPSON Stylus T10 does not print with Windows 7 after works very well with Windows XP

    My EPSON Stylus T10 printer, before I used with windows XP and it prints well now I have a new Windows 7 laptop, I downloaded a new driver compatible with Windows 7.  It prints, but the problem is, it also print the report in each document set that print... How am I going to eliminate printing print report?

    Printer print also the print status

    By reviewing the settings of the printer driver Epson/software or print properties in any program you are printing from.

    This is not a parameter of win7

  • Lexmark X 5650 works very well with Windows 7 Home-64, now, color and size of the pages does not work. The ink is OK. Can't find the solution anywhere! I tried Mr. Fixit... Nothing helps

    Have Windows 7 home - 64. Been using Lexmark X 5650 printer successfully several times. Now only print black and white photos.  Also a part of any page I want to copy will be printed, only in B & W.  Sizes does not correctly... and a lot of ink color & black.  Tried all the suggestion of Mr. Fixit, nothing helps.  Help please!

    Did you upgrade or install something before this product?

    How Lexmark support/help/FAQ to say?

  • MG5320 works very well on cable 2 but...

    When I try to set up on my PC Wireless Windows 7, I get a message that the software cannot find the printer.

    Any suggestions?

    Windows 7 64

    Belkin N150 router

    Adapter Netgear Wg111v2

    With regard to the PC that is connected to the Router 2 they still function perfectly.

    Dave

    Well this thread helped on and doing phone support.

    BUT. I managed to fix it myself so I thought I'd post the solution.

    I converted (boxed) upward 5320 MG

    He sent to Amazon

    Bought an Epson Expression Home XP-400

    Everything works perfectly now.

    My first Canon printer not from the BP1210-D in the middle of the 1980s.

    It is the people of free advice. Free of charge.

    Dave

  • Works very well in the Simulator, but when it is installed through the Desktop Manager questions

    OK so as well Hello world and production apps work correctly on the Simulator... I had some advanced api like blackberry.identity but I removed it because he yelled at me for code signing... I removed the advanced permissions but usually always open... I can see the application in the list of downloads, but clicking nothing

    I tried with the sample application engines and the same thing... click on the application icon, but nothing happens...

    Once again any word on sim and no not use any "features" except the blackberry.ui (on production app)

    blackberry 9630 tour

    Thanks for your help!

    All the BlackBerry Widgets require the signature, even if you are not using a single line of JavaScript.

    The software BlackBerry Widget SDK generates the Java code required to create the widget.  The display of web content in a Java BrowserField, which requires a signature.  Therefore, all the widgets must be signed.

    Code signing keys are usually issued within 2 days of the order, but may take up to 10 business days.

Maybe you are looking for

  • Apple Magic Keyboard 2 (2016) detects only no more than 3 keys at the same time!

    Hello. So I don't know if there is a solution to this, but I played on my macbook pro 15 inch 2015 model very well and I was pressing 'x', 'w' + 'shift' + 'space' at the same time and four keys were detected by the game, and it worked. After I while

  • Can't sync apps or allow iPad Pro

    Don't know if I have a real problem or just confused on how the applications store works. Key goal - don't want to have to pay for the same app twice, first on my iPhone and one more time to get it on my iPad. Scenario: My young son put up our new iP

  • PowerVault-MD3600i connection problem

    Morning all, I was invited to deploy a Dell PowerVault MD3600i as an ISCSI for a Windows Server 2008R2. I have never used this system before, so I'll explain what I have step by step: 1. I connect the Dell MD 3600i on the management port to the hand

  • Reinstall the magical canvas - P71210

    I uninstalled (deleted) magical canvas of our new HP and would like to reinstall (download).  Since it was pre-installed, I guess that there will be no cost.  Can someone please give me a link?

  • Time to Smartphones blackBerry and network devices are different - why?

    My time of the device and network are different in a few minutes. My friends BB is different about 1 hour. -Why is this? -How do I fix this?