Tecra 9000 - no display on the LCD screen when you turn on

I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

Someone at - it suggestions? This is a problem for others here?


As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.

Tags: Toshiba

Similar Questions

  • Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is restless))

    Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))

    Serial number C02FD2CPDF8V

  • Get the blue screen when you create a new message or the response message in OWA Exchange 2007

    Get the blue screen when you create a new message or the response message in OWA (Exchange 2007)


    I suggest you post the question in the forums and check them off below if it helps:


    It will be useful.

  • Request password to the login screen when you try to access Outlook Express. He has never done this before.

    Request password to the login screen when you try to access Outlook Express. It appeared suddenly.
    (I recently bought phone and set up by my family could have invited)
    In any case-"main identity is the identity alone on the login screen. I need password to manage identities. Can I by pass? This means a first time trip into the bowels of the registry? or I can avoid this.

    original title: express outlook for connection screen password
    Then we will try this password to logon OE.
    Outlook Express keeps to request your password
    Save the password setting will no longer exist in Outlook or Outlook Express
  • I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

    I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?


    Info on the link above will help you.


    More info on including a password reset disc info.

    See you soon. Mick Murphy - Microsoft partner

  • Qosmio G20 - could not get the video to display on the LCD screen

    I have a laptop Toshiba Qosmio G20, running Windows XP MCE.

    The DVD player on board isn't sounds very well so I thought I would plug an external DVD drive to expand its use. After a lot of internet research, I finally found how to do this. Here's my setup.

    Using the monitor port I used the adapter 3 RCA jacks. (There is no S-video on the DVD drive and an adapter did not work). I finally discovered that in order to get the image on the screen, I have to use Fn + 4. Now, here's where I'm having the problem. I can't get the video to display on my external LCD. FN + 5 didn't do. The monitor is an I - inc AH191D and is connected by VGA cable. There is no driver other than the one for the VISTA operating system... That is why it is not anywhere in the Device Manager.
    Here are the settings I use in order to have all that shows on my desk, shows on the monitor.

    In Control Panel open to the screen. Properties
    Number chosen 1 - multiple monitors GeForce Go6600 video card...
    Advanced under
    the GeForce G06600 tab,
    nViewDisplay Mode: clone 1 a 1 b
    The main screen: digital flat screen
    Secondary display: AH191

    I also tried using the properties of controls on Toshiba. He says under TV output TV output but gives options of the program, but I don't know what I would use. Any ideas out there?

    Wait I'm confused, if you try to send the output of your external DVD drive in the laptop, and then display the image on an external monitor attached to laptop?

    If you use the DVD player on your laptop, it will be good quality S-video as a signal of low resolution.

    Is there something wrong with the DVD player?

    If it's just the DVD software you don't like, you can download other DVD players. PowerDVD is excellent, its better than WinDVD and other players in my opinion.

  • Get the blue screen when you play a game (COD modern warfare 2), ID: 1044. At all the most recent drivers.

    This is part of the error code, if you need more just ask. (It's in Norwegian, but I guess you'd understand it anyway)

    Pa problemhendelse Navn: BlueScreen
    OS-versjon: 6.1.7600.
    ID for nasjonal innstilling: 1044

    Tilleggsinformasjon om problemet:
    BCCode: 124
    BCP1: 0000000000000000
    BCP2: FFFFFA80082494B8
    BCP3: 0000000000000000
    BCP4: 0000000000000000
    OS version: 6_1_7600
    Service Pack: 0_0
    Product: 256_1

    I have all the latest drivers, and no update is available in Windows Update. When I check the event viewer, it is said:

    - Provider of
    [ Nom ] Microsoft-Windows-Kernel-Power
    [ Guid ] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
    Event ID 41
    Version 2
    Level 1
    Task 63
    OpCode 0
    Keywords 0 x 8000000000000002
    - TimeCreated
    [ SystemTime ] 2009-11-16 T 12: 53:50.350843600Z
    EventRecordID 4618
    - Execution of
    [ ProcessID ] 4
    [ ThreadID ] 8

    Motherboard:    ASUS P5E WS Professional
    Chart:           Sapphire Radeon HD 3870 X 2 1024 MB
    CPU:                 Intel Core 2 Quad Q9450
    RAM:                 OCZ PC2 - 6400 Platinum Vista PErformance Edition 8 GB (4 x 2 GB)
    Power:             Power PC & Cooling Silencer 750W

    Nothing is overclocked, and my cooling system is running on max, never had a problem with the heat.

    So what is the power of the nucleus, and why he will enter the blue screen only when I am games? And most importantly, how do I do?

    Thanks for the replies!


    It was just a possibility that heat is a problem.  Also in your games if you operate in high res\max video settings you can turn them down to smaller settings and test.

    You also mentioned that the motherboard has not yet all drivers for Windows 7.  Maybe it's that you will have this kind of problem until you get correct chipset drivers.

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to fix the black screen when I turn on laptop

    The power lights, but all I have is a black screen.

    Cannot use the keys F. NO screen... all black!


    If you have no splash screen (Dell, Acer, Logo etc.) or instructions at the bottom of the screen to enter the BIOS (F2, delete, etc.) when you start your computer, you have a hardware problem.

    If under warranty, contact the manufacturer. If it is not under warranty, contact a repair shop, local.

    See you soon.

  • How to stop the keyboard to the loading screen when I turn on the computer?

    How can I get the on screen key board to stop appearing

    How can I get the on screen key board to stop appearing

    Assuming you are using Vista.

    Start button > control pPnel > left column, Classic view > accessibility > use computer without mouse and keyboard >uncheck "use Screen keyboard" > click Save for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Text for the username variable input area moves to the next screen when you click

    I assigned a username variable to a text entry area. If I mouse click inside the text box to enter a name, I am taken to the next screen. In other words, the entry text box seems to act like a button. Is there something I need to change in the Properties window to prevent this?

    Hi Eddie,.

    You have 2 possible actions: a by clicking on the button (success), a when you click outside the button (the rest of the slide) which is a failure. And you can attach an action at a time. The default action for both is 'Continue', which means that the head of reading which has been suspended by the button, will continue. You don't want that to happen if the user clicks on the button, but outside the key (like by clicking in the field ETB). This is the reason why recommended Manish allows you to change the action for failure to 'No action', which means that nothing will happen if the user clicks outside the button. He can then click in the text field and type its entry.


  • iPad 2 returns to the home screen when you try to type in the search bar


    My iPad 2 is a return to the home page when I try and type in the search bar of safari.

    Have released the story, the iPad, but it made no difference and ideas how to fix?

    Obviously a problem on the end of Apple but try settings > Safari > Safari Suggestions > offshore, for now.

  • Envy 15-j144na: indefinate black screen when you turn on

    I need help I have a laptop of hp envy 15-j144na

    the power led lights up when I press the power on button. the f12 key led stays orange. the caps lock white button will blink twice every four seconds. the screen never lights up.

    When I turn on, I hear the drive power upward.

    I tried to take out the battery and unplug AC and then pressing the power button / stop for 15 seconds then fix ac and power on.

    I tried to remove the battery and memory and power cable. then put it all back together and tension.

    I tried to hold the windows key and the b key and pressing power for a second, but it is not the bios update.

    I tried to connect an external monitor, but it does not show anything

    When I power the laptop on the bios does not appear if I press f2 or DEL or esc.

    before that, windows is checked 10 crashed when using bittorrent and then reset and black screen now power on.

    any ideas?

    I left my laptop this weekend, and he had the same symptoms.

    I swapped the hard drive to another hard drive.

    The new hard drive has windows 7 and the bios reported that he was unable to start. It was different because I could see something on the screen at least BIOS.

    Then I plugged my hard drive laptop screen and back to work and it started windows.

    I don't know why the laptop now works. Very strange. I have never seen this on any previous laptops or desktop computers.

  • 6s + guard stuck in the wrong direction when you turn it on?

    My 6s + keeps stuck in the wrong direction when I come out of my pocket and turn it on. When I held vertically, it's very, very often stuck in landscape mode and even when I flip it back, nothing has changed and I need to activate the button and off to change. Is this a common problem? Is there any fix for it?

    Thank you.

    Try force reboot:


  • Download the search screen when you try to open a folder on my desktop

    When I double click on a folder on my desktop, it comes up with a screen of search rather than the documents I have in each folder.  How can I get this back to how it was before I see my documents when I open a folder?

    Doug Knox fix - http://www.dougknox.com/xp/scripts_desc/xp_folder_open.htm
    Search Companion starts if you double-click a folder or computer drive - http://windowsxp.mvps.org/searchwindow.htm MS - MVP - Elephant Boy - Don ' t Panic!

  • Get the blue screen when you select last good known Configuration

    Original title: screen dlue

    blue screen won't go away after I selected start in the last known good configuration

    We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

    Pouvez be able to get the DMP without crashing files by booting in SafeMode (F8) with option.* *.

    If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

    To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

    The procedure:

    * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
    * Zip up the copy.
    * Join ZIP archive to your message by using the button (attachments) "trombone".
    * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

    To ensure the minidumps are enabled:

    * Click Start, in the search box, type: sysdm.cpl, press ENTER.
    * On the Advanced tab, click Startup and recovery... Settings button.
    * Make sure that automatically restart is unchecked.
    * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
    * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
    * OK your way out.
    * Reboot if changes have been made.

    Please also run MSinfo32 and download the output as well.

    To run MSinfo32 please go to start > run > MSinfo32
    Go to 'file', 'save' and download the PDF is saved with the DMP
    (Instructions for XP, Vista, Win 7, Win 8)

Maybe you are looking for

  • error code 0165

    I constantly receive 0165 error code when starting the service of 4 k with the connected player. Nothing in the instructions on the net. Internet connections and HDMI are OK

  • How to sort notes entries in alphabetical order?

    Struggling to organize entries in NOTES in alphabetical order since the upgrade to El Capitan? Thanks for any help

  • No RAM?

    All the video games I run tell that I don't have any what RAM when I have 6 GB of RAM on my computer. Then it won't be just to start the game because of that. I need HELP. I have windows 7 64 bit

  • Cannot save the project with film about WMM 2.6

    Hi im trying to save my movie in Windows Movie Maker 2.6, but it does not let me save all I need a way to record as soon as possible... Please give me answers that will help me as soon as possible!

  • Credentials manager

    When I reinstalled Vista and applied SP2, I got called the Credential Manager.  I don't like this feature, and I don't want to use it.  How can I disable it for good.