Tecra 9000 reload Windows XP

Similar Questions

• Sound problem with Tecra 9000 on Win XP SP2

  Hello!

  First! Excuse me for my English!

  I am trying to install a Tecra 9000 with Windows XP SP2. The problem is the noise. My XP does not recognize the sound card, I am trying to install the drivers, but the system answer me 'the driver was not installed' and I don't know how can do to his works.

  I read a few post on the forum, but I can't solve this problem.

  Could someone help me.
  Thank you!

  I think this doc Toshiba should help you:

  [Windows XP Service Pack 1 and 2 incompatible with existing Yamaha driver sound | http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=2772 91xml & sliceId = & dialogid = 54976777 & stateId = 0 0 52121258]

  There is a link to a driver that should help to address this problem.

• Issue when installing fresh Windows XP on Tecra 9000

  I have a Tecra 9000 running Linux.

  I would like to install windows XP but the Setup CD I charge readers and then crashes to windows is the loading screen. I have no recovery disks or driver for this computer as I bought it used. and I don't know why he struggled.

  The SN for the unit is Z1086914G ST900-0.
  I have read forums about similar problems and think it might be the chipset driver for the HARD disk.

  I can't find a driver for nowhere so I can't try this line of thinking.

  Anyone has any ideas.

  Hello

  As I remember the Tecra 9000 does not support RAID or SATA controller that would require RAID or SATA drivers, so I put t think that your problem is related to the missing driver

  Have you tried to install Win XP SP2 from container?
  Are you sure that the HARD drive is OK? I think you should check the HARD disk for some problems initially.

• Tecra 9000 - error message with Windows XP SP3 home edition

  Hello

  I have a Tecra 9000 in very good condition, until yesterday, I have no problem!
  After updating my Windows XP service pack 2 on the "service pack 3", everything works fine but when I press the button 'TOSHIBA controls' and 'mouse' for setting, Windows error message occure: "run a dll as an app"!

  Even if I go to "Start" and "Control Panel" and press the mouse, after setting close icon, or just simply do nothing (cancel), the same message! I did not notice any other problem with the TOSHIBA utility!
  My driver for mouse is "Logitech mouse ware, 9.40! Can you help me?

  This oldie works well with Windows XP SP2 home edition and in my opinion you should use without SP3. Try to remove the SP3, and I hope that everything will work properly again. Problem is that the old tools and utilities designed for Toshiba probably aren't tested and updated to SP3.

  I have more Satellite M70 and use sill with SP3. I don't want to risk anything and have problems.

• Tecra 9000 - BIOS block 1 damaged

  I have a Tecra 9000 with a broken BIOS.

  I looked at upgrading the BIOS FAQ [1] and searched the forum (found [2]). However, I have no Windows installation and at least my Toshiba Tecra 9000 doesn't have a floppy drive, so I can't follow the procedure described here.

  You will find my update of the BIOS for the laptop with the serial number 32222375G: http://de.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=DE&userAction=SMP_RESU LTS_PAGE & partNumber = PT900E-08YZG-GR & serialNumber = 32222375 G & USER_ACTION = Serial % 20num ber

  So, what should I do?

  BTW: I can't real poster on this forum. I can't post the exact BIOS error message because the forum software claims that I used profanity. The relevant part is contained in the subject line of the thread.

  [1] [http://eu.computers.toshiba-europe.com/innovation/faq.jsp?FID=TRO0000000b07 |] http://EU.computers.Toshiba-Europe.com/innovation/FAQ.jsp?FID=TRO0000000b07]
  [2] [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=46581&tstart=0 | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=46581&tstart=0]

  Hi uAyjYdKT,

  Download a version on diskette in the bios called "trad.
  -You can always start your machine?
  -You can install anything on hard drive?

  If both answers are Yes, follow these steps:
  -do a back on your hard drive installation (this can be done on another machine)
  -unzip / uncompress the bios disk do a hard drive
  -Insert the hard drive of your machine and run the bios update

  If the responses were not: see one servicepartner to have made

• Tecra 9000: SD card reader does not work with XP

  I've made some progress on this issue, it seems that Cardbus devices cannot share IRQS, although the main problem is that FFDFB200-FFDFB3FF memory address is shared by the SD card controller and device memory SD card. Unless we find a way to edit the registry to resolve this conflict of memory, the simple answer is that the SD card reader does not work under XP.

  I think that it would take a major surgery of the register or re-writing of drivers to move the address of memory used by the SD card device, I always work on this for now.

  Can someone support Toshiba or Toshiba Marketing explain to me why my Tecra T9100 has a "Designed for Windows XP and Windows 2000" sticker on it, when Toshiba does fully support XP on the 9000 series?

  David

  [Edited by: admin]

  Hi David

  Unfortunately, I n t think that you will find here a Toshiba marketing person or other departments. It is ONLY a user to user forum.

  What you say, it is simply NOT true.

  The Tecra 9000 was delivered with 3 different OS.
  It was delivered with Windows XP Pro, W2k and Win98. You can order all the images of this Toshiba home Toshiba service partner. That's why Tecra 9000 does support Windows XP!
  Tecra 9100 has been bundled with Windows XP and Windows 2000 and also supports Windows XP!

  Of course, there are different models with a different hardware configuration, but all supports Windows XP.

  I put t know why you get this error message or why you cannot use the SD card, but I guess you don t use the image of Toshiba. That's why you installed your operating system isn't properly. Because you are a newbie you don t know the Toshiba all the driver installation must be done in the right order and all Microsoft QFEs must be installed also.

  As you can see you must pay attention to many important things if you want to manually install the operating system.

  Good day

• Tecra 9000 display driver

  Hello

  I recently acquired a Toshiba Tecra 9000. I added a new 40 GB hard drive and installed Windows XP. The standard display driver does not allow me to connect an external monitor to extend my Windows desktop on 2 screens, so I downloaded the latest driver on this site. However, when I try to install the driver (S3 Graphics SuperSavage/IXC 1179) a hardware setup error appears saying this driver has not passed Windows Logo testing to verify the compatibility with XP. There is no other driver to select on the Toshiba site, so I installed the driver. At first, everything seemed ok, but today my laptop has projected Blue 6 times within the last hour. I've now uninstalled the driver and have not had any problems. However, because I have everything installed display drivers display is basic at best.

  No one else has this problem with the display driver for a Tecra 9000 with XP? Or anyone knows other drivers compatible with my model?

  Thank you

  It's very strange! All the drivers on the Toshiba download page are the same as the CD Utility & Tools.
  Is your TECRA 9000 a European model?
  Try using the driver CD tools & utilities. On this way, you'll be sure to use a right.

• Tecra 9000 - WLan and new hardware issue

  I have a 2nd hand Tecra 9000 that works all fine except the Wlan
  Also the new hardware wizard (perhaps related) keeps poping up.
  1. WLan Bluetooth.
  the computer labels proclaim inside the WiFi or Bluetooth.
  * There is a Wlan switch that illuminates an indicator
  * refresh list product Netowrk "(aucun réseau sans fil dans la gamme) PC is about 2 feet of wireless router that other PCs pick up fortunately"
  * fix the wireless, cannot complete does the stuff that ends with "to join the wireless network!
  View wireless networks still says "no available wireless network.

  Device Manager identifies Toshiba Wireless LAN mini PC card OK, but even if I put it on the same channel as the router it captures anything

  I'm a bit woried it can be off somewhere because I can't Fn + F8 to work. There simply nothing. Is there another way to access the installation that displays Fn + F8? Maybe his game to bluetooth or something?

  2, New Hardware Wizard. Manager device Idenifies "other devices" and under the present is SiW (yellow? and!)
  General ' not configured not reinstall the driver.
  Detail, said USB\VID_0930 & PID_0502\FB3A017A0300
  but updae windows can't find a driver.

  Any thoughts on one of these is welcome

  Hello

  Tecra 9000 was equipped with optional WLan and module BT.
  This means that not all units supports the feature WLan and BT.

  Anyway, if you found the WLan and BT label background o of the device you T9000 should support these two features.

  First of all, you must make sure that the WiFi network has been successfully activated. The material on the side of notebooks switch must be activated. The FN + F8 key combination switches between the BT and WLan. So if you want to use the WLan you have to use the FN + F8 key

  I put t know why the keys FN don t work on your T9000. Maybe some tools and drivers are missing. So, try to reinstall the drivers from the Toshiba page. You should find it in the ARCHIVES.

  I think the unknown device could designate the BT module and the driver missing BT.
  The BT driver here could be downloaded from this page:
  http://APS2.toshiba-tro.de/Bluetooth/

• Problem installing XP on Tecra 9000 battery

  I just installed Windows XP on my Tecra 9000 and re-installed all the drivers via software Driver Genius Professional 2007. Everything worked fine except the driver of my battery (battery model: PA3084U-1BAS) and the infrared device.

  I can't find the proper drivers. You can provide them for me?

  Thank you very much for the help!

  Louis

  Hello

  Usually the doesn´t need drivers battery. The only 'drivers' that needs to be installed (and which are limited to all the energy components in your system) are Toshiba Powersaver. If it is installed, then the battery stuff would be recognized.

  Please go here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Download and install the powersaver and other tools for your machine if not already done. Computers laptop Toshiba need their own tools to work properly and not just drivers.

  See you soon

• Tecra 9000 USB port failure

  Hello Helpers,
  My Tecra 9000 IGH with Windows XP model has two usb ports dead and taken from mouse. From what I've read, it's a defect with this model. The USB ports are on a separate module that is plugged into the main Board.

  Is the fault on the set of the USB module or on the main Board or the fault lies in the power plug. Is the fault of the joints for example dry easily repairable, where a quick touch of a soldering iron can redo them. Does anyone have a circuit diagram which would make tracing easier fault.

  I had partially circumvents the problem by using a USB card, but this often causes freezing the computer and my laptop hard drive will not work with it.

  Any help appreciated.
  Linlithgow your sunny.
  Derek

  Hello Derek

  On this path, it is not easy to say what the problem is here, but I guess there is a contact problem. It is really not easy to say it's the problem motherboard or separate module itself. I think that it should be checked on professional way.

  The second problem is the scheme of construction. As far as I know that is not a public document and you'll be lucky if anyone has it for you. I know that you will not be satisfied by my suggestion, but I think the best way is to communicate with the technicians and talk with them. Maybe there really small problem and can be cheaply repaired.

  Good luck!

• IDE #1 error on my Tecra 9000

  I have a combo DVD/CD-RW drive in my Tecra 9000, model number UJDA710.

  Unfortunately, when I start the laptop, I get the message Error in IDE #1.
  It will always start in Windows XP, but the drive is not available and is
  not shown in Device Manager.

  I read on the internet that it is something to do with the fact
  This work of discs online slim Toshiba cable select (CSEL) default mode
  but this can be fixed by an update of the firmware or CSEL-changer.

  Is this true and if so, what do I need solve the problem?

  Thanks in advance.

  I guess it's a disc that you added and not one that comes with the Tecra 9000 originally.

  If the laptop worked fine previously (and otherwise works OK now) then Yes, you will need to change the drive to CSEL. There is a way to do this in hardware, by bridging two contacts on the connector IDE PCB, but you have to be VERY careful about the bride points correct and do it with a soldering tip fine iron. I made myself (to make a work of UJ - 820B in a Tecra 9100).

  If I can find the details I'll post them upwards, otherwise someone else can have these practices.

• Cannot use the recovery CD after update BIOS on Tecra 9000.

  Failed to retrieve the system (Windows 2000) after update BIOS on Tecra 9000. Recovery CD says "it's a bad machine. Can I go back to old BIOS? Another solution?

  Hello

  Maybe chain can confirm, but I put t he seems the best idea to mix stuff designed for laptops Americans and Europeans models.

  Can you please confirm if the method described in the previous ad works?

• Tecra 9000 running W2k - driver for the Audio controller problem!

  Help, please!

  I have a laptop Toshiba Tecra 9000 and recently discovered that the sound was no longer working. I'm not sure exactly when he first stopped working, but believe it was with MS Windows 2000 Updates or when cleaning PC after spyware attacks. While they inspected the real device (Yamaha AC - XG Audio Device), it has each if useful ""! "with a ' Code 10 - device cannot start", in the "Device status" screen
  I removed the device and allowed windows to detect & install, without success, then downloaded and tried many devices and generic drivers, drivers and
  even later as suggested on a Web of Toshiba site, I find
  http://EU.computers.Toshiba-Europe.com namely;

  Driver date: 22/05/2001 Version: 5.12.1.2138

  I'm at a complete loss as to why it has stopped working and what to try next to try and solve the problem. Any
  help or advice would be greatly appreciated.

  Concerning
  K

  Hello

  It is possible only after the installation of the MS Updates that the audio driver is blocked by a load of your system and no sound can be heard.

  If you want you can try to install this driver:
  http://drivers.Soft32.com/driver/download-Yamaha_AC_XG_Generic_Drivers_for_YMF753_743_752-24609.html

  It is useful after installing SP2. I don't know if this will help in your case, but you can try it.

  Good bye

• Tecra 9000: After installation of SP2 Yamaha audio driver does not work

  Hello

  I have a Tecra 9000, with a Yamaha AC - XG sound card.
  The problem is that since I installed Windows XP with SP2 included, I lost my sound.

  I also know that Toshiba is aware of this situation and they managed to post a solution for this. I tried this solution:

  Detail:

  Yamaha AC - XG driver used the PortCls function to check the version of the operating system. XP Service Pack 1, PortCls function is changed, while the Yamaha rider cannot get operatingsystem version correctly. The operating system provides the Windows 95 version. This is why the operating system has a blue screen. That's why Microsoft has added that the solution and the clandestine drivers cannot work on SP1. This problem also happens to Windows XP SP2.
  Yamaha provides already the fixed driver Toshiba. The fixed driver version is the following;
  yacxg.sys 6.13.10.2152 with software synthesizer
  yacxgc.sys 6.13.10.3152 free software synthesizer

  How to solve this problem:
  Install the fixed driver on a system before and after the installation of Windows XP Service Pack 2.
  Install as follows:
  (1) unpack a file attached to your hard drive.
  (2) to start the INSTALLATION. EXE
  (3) click on the next button.
  (4) select ' Yes, "I want to restart my computer now" and click Finish.

  A toshiba engineer told me that first of all I need to install the old driver "5.12.01.3141", and it worked ok, but still no sound.
  And then he told me to install the "6.13.10.2152" version, but it didn't. I got the error message "the driver was not installed.

  I already tried many different drivers, including generics and the yamaha riders.

  Please tell me a good solution for this problem if possible.

  Thank you very much
  Hugo

  Hello

  Do you get the CD of Windows XP Home edition without SP (or perhaps including SP1) facility somewhere? Tecra 9000 is old enough laptop model (6 years) and maybe you should start installing OS like original recovery image.

  Install Windows XP without SP home edition and configure all hardware components. After doing this update to SP2 brand. Maybe this order facilities will help you to have BONES works.

• Tecra 9000 - LED flashes and cannot start

  I recently got an old laptop Tecra 9000. Unfortunately, it doesn't have a HARD drive (it was taken and sacked by the former owner).

  I bought some hard drives that I thought should work in this machine, but all that seems to happen is that the power light blinks 7 times, pauses, then flashes once (and then repeat this.

  I guess it's an error code any.

  Readers, I've tried are a MK4025GAS and a MK4026GAX. The result is the same on both.

  Can we say what means this error, or even tell me the part number of a disk that is compatible with this machine?

  Thank you very much.

  Hi Guy

  One question; have you tried to power the laptop without inserting the HARD drive?
  Usually if the laptop is ok, it should be possible to boot the laptop. Of course the laptop will not load the Windows operating system because the HARD drive is missing but it should be able to start and the led must Flash not!

  But if it flashes, it means that the fault was detected on the motherboard and the LED lamp sends a blink code.
  Short blinking means 0 and 1 long flashing
  Error code starts with LSB (least significant bit)
  for example:
  0000 0001-> 1000 0000

  This code you need to turn it into hex and you will get the error code.
  But in my opinion, no one will give you an answer what it means.
  Each laptop clean error code series offer...