Tecra 9100: Accupoint skids permanently mouse to the side

Similar Questions

• Tecra 9100 does not supply power to the top

  Hello

  I got Tecra 9100 laptop computer and you have a POWER PROBLEM.
  Basically, it got stuck at the start of the OS and I was unable to click or move the mouse to do something. So I held the power button to turn it off. I do not turn on again entered game coz I had to go somewhere.

  So when I tried to move THE next day and he won't power upward. I can see a GREEN LIGHT but can not hear any CPU, the FAN, the monitor or the hard sound. When I connect to the AC adapter, I can see the LOAD LED but nothing else seems to be powered.

  I also tried to replace the memory Module, but still won't power upward. I guess that the motherboard does not have to be ABLE so nothing is turned. But the one thing that I do not understand why the POWER LED on (GREEN LED) is on, unless it has the power source.

  Can someone tell me what I need to do?
  Help, please

  Thank you

  Hi Sonia,.

  I suggest that you try to remove the battery and power supply so that all power of the laptop is turned off. Reconnect AC power and try to turn on the laptop. If it works, then re-install the battery. I think that the electronics of power sometimes get "stuck" and this procedure usually receives smooth them.

  If the unit still does not power on after having tried the above procedure, then I suuspect there must be a problem of internal material in which case you must take the device to a partner of Service authorized for rectification.

  Kind regards

• Tecra 9100 - BIOS block 1 damaged and the update of the BIOS?

  Hello

  I have an old Tecra 9100 with years of quality service, and it is my first problem, but is a great, after a forced restart the display shows the message BIOS 1 damaged block. I tried to fix the BIOS upgrade to the latest version I found, the 1.6 one, but it is a version of Windows (to upgrade a Toshiba computer I think) and when I try to run it in another computer to generate a floppy and upgrade the BIOS drive, I can't, because a common message from modules of Toshiba.

  Its there any floppy BIOS image - archive I can download to perform the BIOS update the BIOS?

  Thanks in advance.

  Hello

  All you can find is stuff on the Toshiba support page. I don't know where you live, but try to contact nearest Toshiba authorized maintainer.
  They have access to the database of Toshiba and they can get it for you. Call and ask for help. I'm sure they will help you fix this BIOS.

• Tecra 9100 blue screen when you disconnect the power supply

  Hi people,

  Im having a major problem, Ive had a major problem with my tecra 9100, when I unplug the power cable and try to use the laptop on battery, the blue screen comes up saying NMI: channel check / IOCHK

  then the computer shuts down, it restarts only properley if I plugged power of ext,
  also something to note, when I unplug everything first, he's not str8, its only when I try to use the laptop, which is pressing a key

  If someone knows something about this could you please let me know

  Thanks carl

  Hello

  This has been already discussed here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13784

  Check the sanremo poster, which refers to the knowledge base article Microsoft!

• WLAN on Tecra 9100 - LED should go orange if the s/w keyboard shortcut NOT installed?

  I bought a Tecra 9100 that had been restored to XP SP1 and without good Toshiba utilities that most drivers seemed to be OK - for example screen OK but USB has been 1.1 until I added the Intel Chipset drivers.

  I can't get the WLAN card to work by sliding the switch (close microphone) - also, it does NOT appear in Device Manager. I spotted a post below (which was locked) where Pedro said WiFi hotkey software must be installed to make it work. Two questions:

  1 if the s/w keyboard shortcut IS NOT installed should always be able to mount the light Orange / appear in Device Manager
  2. is there an alternate download site because I tried 20 times in the last 15 hours at: http://support.toshiba-tro.de/tedd-files2/0/cmod-en-20070925121500.zip (for the common modules) and the site just seems to be 'dead' - nothing is received at all

  Thank you very much in advance - I want to become a happy member of Tosh' club... Cheers, Brian R.

  PS; The Tecra has a WiFi tag on the bottom and even a MAC address and I have not yet looked for nothing changed so much material.

  Pedro post follows:
  + Hello +.

  + Is the map original WLAN or you have upgraded on your own? What is with Device Manager, this is the card of wireless network which are listed there? +

  + For the use of WLAN, there are few requirements: +.
  + WLAN switch must not be broken or defective.
  + Wireless network card must be compatible one.
  + The WLAN antenna must be connected correctly.
  + Wireless network card must be installed properly (the right driver must be installed) +.
  + Wireless network card must be enabled in the Device Manager.
  + Wireless network card must be activated using the FN + F8 key combination (Wireless Hotkey V2.0.0.1 must be preinstalled) +.

  (1) first you should check if there is a yellow exclamation (unknown device) in device under network adapter Manager.
  If you find any unknown devices in the network adapter section then your laptop was not equipped with WLan minPCI card!
  The shortcut key has nothing to do with the WLan card status in Device Manager! The keyboard shortcut software only controls the function FN + F8.

  (2) don t know what you mean! The functions of link!

• Tecra 9100 - scroll has stopped working on the left and right buttons

  I can no longer scroll by pressing the buttons left and right above my left click button. It was working fine until one day it just stopped doing anything. All solutions?

  Thank you
  -Lewis

  Why you n t try to reconfigure the touchpad settings.
  Have you checked the settings in Control Panel-> mouse control?
  There should be an option and some touchpad properties that could be changed.

• Tecra 9100 - no audio device after XP Pro install

  The audio device does not appear after installation of xp pro sp2 on Tecra 9100.
  I tried allsorts to research on forums and websites.

  I found install them drivers on this site but used to my laptop.
  I need to locate the audio device before get drivers?
  I know this is a very old problem but I tried for 12 months with no result.

  Any help appreciated.

  WOW!
  You are still using the good old classic? Surely she s or it was a nice laptop but maybe it's time for something faster? ;)

  Back to your question;
  On the European driver Toshiba page, you can find drivers Tecra 9100.
  You should look in the Archive (in product type click Archive instead of the laptop)

  There are two audio drivers for Win XP.
  She s Yamaha audio driver version
  -5.12.01.3141
  -6.13.10.2152

  I guess the 6.13.10.2152 is a more recent who is available and I think that you should use it!

• Customer password-Toshiba Tecra 9100 Setup

  Hello:

  I have an old Tecra 9100 and I need to access the configuration, I wrote to Toshiba Spain provide data on my computer and from there I was forwarded to a different email client and atencionn the truth is that, after nearly two months now, however, no one has contacted me!

  On the page to access this forum is reported that if the user is logged on the Club, among other things, will receive the password if necessary.

  I am really very disappointed with the service that it provides to its customers and Toshiba but I am about to buy a new one, I have serious doubts have emerged whether he should opt for a Toshiba.

  If anyone can help me write in Spanish, my post is [email protected] address

  Saludos,

  Rafa

  Hello Siegen

  I am very interested to understand your problem and try to help but I really didn t understand your problem. Of course, my English isn't the best, but I hope you can clearly explain what you want to know about this old notebook.

  BIOS password has this oldie and now, you don't have access to it now?
  Is your laptop or you bought one?
  Here you can ask what you want and I'm sure that you can chat with other owners of Toshiba laptops on your problems.

  I have two of them and I am very satisfied. Support and customer service are on the high level. So I'm really interested about your problem and the reasons why you think that the service is not good for you.
  I mean, for each question, there must be a logical explanation.

  I am quite often here and you want to discuss with other people. If the last comment on the propaganda is somewhat strange to me.

• Hi speed USB via a Port Replicator advanced for a Tecra 9100?

  I have the same problem with a Tecra 9100 and upgrade to hi speed USB as a previous post where the proposed solution was to use a PCMCIA card.

  (see link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=24103)

  I had an idea, but I don't know if it will work and need some advice?

  Can you buy an Advanced Port Replicator that has Hi Speed USB 2.0 ports on it (like the PA3082U APR II that works with the Tecra 9100) instead of the PCMCIA card.

  If the docks of Port Replicator in the motherboard will it give you Hi Speed USB 2.0, or is the Tecra 9100 forced to USB 1.1 via hardware in the laptop itself and the Replicator will not help?

  Also if I go down the road of Port Replicator I need drivers for speed ports Hi of the Replicator to work on the Tecra 9100?

  Or to ask the question – what is the PCMIA USB 2.0 card in that advanced with HI Port Replicator speeed USB is not?

  Thanks in advance

  Hello

  the Tecra 9100 has NO usb 2.0 and it's a fact. Given that the Replicator has these USB ports 2.0 does not mean that your machine when it is docked to the Portrep, is able to manage USB 2.0 devices. The portrep, it's like a usb hub and behaves like. So if your machine doesn´t have it then that's it.

  And the explanation on the PCMCIA/Cardbus solution:
  The pcmcia card USB 2.0 Chipset, this is the reason why it IS a USB 2.0 device (roothub).

  I hope this was clear to you :)

  Just buy this card and you will have USB 2.0

  Welcome them

• Tecra 9100 - startup of HARD disc is not possible

  Hello

  I have a tecra 9100 that is not booting at the moment. When I turn it on I get the Tosh start screen and I can choose a boot device if I want to. All that I choose (HARD/CD disc) all I get is the flashing at the top left cursor.

  I got out the HARD drive and tried to start a CD/DVD but that doesn't work either. Also I can't get into the BIOS, I tried to do an upgrade via a bootable CD, but that no longer works.

  Cheers for any help

  Hello

  Have you tried to use ESC then F1 to access the BIOS?
  Check in the BIOS boot sequence.

  Good bye

• Tecra 9100 - required accupoint driver for XP

  Hello

  I need a MS XP driver for the accupoint of my new (used) Tecra 9100. Or at least I think, because the accupoint does not work and there is no configuration on the menus of the mouse tab.

  On the driver download page http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU I don't know which is the "driver type", I have to choose.
  Can someone help me?

  Thank you

  JS

  There is no available accupoint driver for Tecra 9100 and Windows XP.

  I searched on the Web from Toshiba site too and I looked in the installation instructions, but there is no driver available.

  Sorry, but it's done.

• Tecra 9100: Where can I get the motherboard?

  Hello everyone

  I need the part number of motherboard of tecra 9100 (PT910E-00DYG-S3)

  can someone help me where I can get this motherboard

  Hello

  Usually, if you want to buy accessories or devices to your laptop, but you don? t know the right parts, so you can contact Toshiba service partner in your country.
  There you can order everything for your laptop.

  On this page, you will find ASP in your area:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

• Tecra 9100: I want to use the same settings in all user profiles

  I use it on a Tecra 9100 (if it matters).

  Is it possible to export my settings (best for all profiles at a time), to copy it to another windows user? and any other laptop Tecra 9100? I work with two user accounts on my laptop (one for businesses, a private), I did all the settings as I want, but in the other user account, it comes with factory settings, so I guess that these settings are stored for each user separately.

  And if it's possible, I want to copy the settings for laptop computer to my colleague too.

  Hello

  I have gift? t know exactly what settings you use, but as far as I know just administrator have full control over the tools pre-installed and utilities. As an administrator, you can give an administrative access level.

  On the copy on another machine I can't tell you much, but I guess it must be configured individual.

• Tecra 9100: Unable to connect external monitor to the APR III Plus via DVI

  Hello
  I have a laptop Tecra 9100 that I try to use with an Advanced Port Replicator III (APR3 +) to connect to an LCD flat screen widescreen Dell via the DVI connector, but so far without success.

  All other connections on the APR3 + operate without problem, the monitor stir however not until Windows finishes loading, how it shows a totally white screen with black bars very close down vertically.
  I upgraded to the latest version of the BIOS and tested all the cables, but in vain. I also carefully searched from Toshiba Web site, but the only document which deals with taken ports supported on the APR3 + I can find does not list my laptop model at all.

  Please can you tell me if this mode of operation is supported and if it is how to enable it?
  Alternatively, if it is not supported, could I use a VGA - DVI cable to connect the APR3 + LCD flat screen?

  Concerning
  Ross.

  Hello

  I see that you have updated the BIOS. I think that it was not a bad idea, but you also need to check if you have installed the latest version of TOSHIBA Mobile Extension 3.
  I don't know if that helps, but please check.

  How to check the current version of TOSHIBA Mobile Extension 3
  -Select Control Panel in the start menu.
  S ' please click on ' Add / Remove Programs "from the control panel.
  -TOSHIBA Mobile Extension 3 for Windows XP V3.xx.xx.XP"appears in the list of software to ' Add or Remove Programs".
  -If the current version of TOSHIBA Mobile Extension 3 installed on your computer is V3.19.00.XP or more, please upgrade to the new version V3.21.00.XP.

  How to upgrade the TOSHIBA Mobile Extension 3 to version V3.21.00.XP
  -Uninstall the current version of TOSHIBA Mobile extension 3
  -Restart the computer.
  -Download the new version, unzip it by running, and run "Setup.exe" from the compressed file.

• How to use the CD of diagnosis of the engineer for Tecra 9100

  Anyone who has used the engineer Tecra CD diagnostic for the 9100 (or any other model if they are similar)? I was able to acquire the CD and have been able to recover part of the diagnostics to run tests starting at BACK 6.22 and the tests directly to the release of the CD. There is probably a "correct" way to use this CD but I have no documentation.

  Specifically, I'm trying to diagnose his painful card problem - it is not recognized by Windows and I can't install the Yamaha riders. I basically JUST replaced on this laptop and still no sound.

  All in ALL, I mean: two mothers (upper/lower case); map its (three different cards!); CPU - what else is one that can be connected to the sound?

  Anyway, if anyone can give some guidance on the diagnostic use of the engineer Tecra 9100 CD it would be greatly appreciated.

  no_bones

  Where did you get this CD of engineers?
  I m scared but in my opinion these CDs are not intended for common use of the user and, therefore, you will not find many people who has experience with those CD.

  But it would be very interesting to know how to get this CD