Tecra 9100: After the installation of the DVB - T USB no sound could be heard

Similar Questions

• Tecra 9100: After the CD/DVD drive upgrade IDE #1 error apears

  Hello!

  I'm a happy user of Toshiba laptops, and I like my Tecra is even older. My setup is a PIVm 2.0 Ghz and a few days, I changed the HARD drive. This isn't THE PROBLEM.

  Now, I have a 80 GB Seagate HDD and works very well. Days ago, I bought a DVD - RW, H - L space (Hitachi-LG) GWA-4082N, origin of another towing specifications.

  When I boot the IDE #1 ERROR message is displayed. In windows works fine, recognized as the secondary Slave PIO mode only. I am integrating then, I searcehd the web and found solutions.

  I've read on C - SALT and reversed the master/slave issue. I downloaded a firmware for Toshiba, same version for my DVD but nothing. In my opinion, is for Toshiba, but not for this model. So I tried the solution of jumper pins 45 & 47. 47 pins Cable sync/select and 45 is identical to 48 GND.

  The solution is good half. I started the laptop and does not work, no more ERROR IDE. In windows is now secondary master UDMA Mode. Works very well...

  THE PROBLEM: it's that I turn off the laptop, pick up the DVD, battery and Commander edge and when I reconected all back, the #1 ERROR IDE is sown again :(((.) Therefore, works, but sometimes it is not. What is the problem? Even with the 45 & 47 pins the message. I have readit pins 35, 36 is something CSEL0, CSEL1...

  I do more short films? Or where I can find a good firmware for my drive or the software to mass the firmware...

  Please read this post and I hope you can help me!

  Hello

  As you already know not all ODD is compatible with a laptop because masters /slave and c - salt settings.
  These parameters are controlled by a firmware and most often but not always these firmware located on sites of car manufacturing.

  I don't think you'll find this firmware on the Toshiba site. It s recommend buying the good player but don't not to Flash the firmware.

  Anyway, I also found the statement on the connection of the PIN 45 and 47 together.
  This is a solution in time and not recommended because it will damage the other pins.

• Re: Tecra M10 - after the installation of recovery XP - Boot time 3-4 Minutes

  Hey,.

  Hey well Im installing this laptop for a client and I used the XP CD recovery.
  Now every time you start taking 3-4 minutes after the Windows XP logo. Black screen and the HARD disk is almost not in use.

  I get the following in windows logs event: event 7026 - Source: Service control management
  Failed to start or systemdrivers - atapi and PCIIde
  Device Manager is fine, all green

  Google search but found nothing useful. So what can I do the notebook starts up fast as usual?

  Post edited by: HansiHusten

  Hmm, check if the Tempro software is installed.
  If Yes, then you have two options; would it remove the system or if you want to use Tempro then you need to update this tool.

  The Tempro software is a tool of Toshiba which monitors the HARD disk and the operating system and send you a notice if a new update of driver/tool is available on the European driver Toshiba page.
  I deleted this tool because I don t need.

  I have always followed this suggestion; never change a running system you know :)

• XAV-701HD questions, even after the update - changing Staion, no sound after the cycle of keys.

  I have a Sony XAV-701HD installed in my 09 Ram. I have had for a while now and still have problems even after the last update of the firmware. Since I installed the radio, the stations would change when I turn off the key and then restart the truck. Ususally a station off where I was listening. Then I noticed that when you listen to a CD, if I stop the truck, stop, and restart, I have sometimes no sound from the CD unit that change source to something else then back to CD. In addition, it seems to take an eternity for the CD start playing when I insert one, or when I start the truck every morning. Sometimes the CD start just up, other times not. Now, I've added SiurisXM to the unit, and I noticed that when I turn the key off the coast, and then back on, the device will not be playing Sirius Music until I have changing source, let the next launch of source for play, then switch back to sirius. I'm a professional installer, I know all my wiring is good, everything works. My Kenwood has worked perfectly in the same truck for 2 years before I changed to the Sony. Any ideas?

  
  

• After the use of helmet - no sound

  Everyone knows who after the use of the helmet, when it came out it is not through the speakers of Treo 680?

  I couldn't hear the phone ringing, incoming audio or ringtones playing. System sounds (beeps, etc.) seems to work. I have reinserted the helmet along with the helmet. I tried jiggling the plug and at the end of a few moments, has been able to recover the loudspeaker.

  There is a small switch inside the plug on your device, sometimes when a headphone is inserted and then picked up on this switch is not back to external sound more. The resolution is simply re - insert the plug and remove a few times to get the changeover to folding and the sound should return.

  Message relates to: Centro (Sprint)

• Tecra S1: After the installation of new Toshiba BT stack does not work correctly

  Hello
  I need help on my problem with the bluetooth configuration on my laptop tecra S1 with built-in bluetooth hardware.
  I have a Blackberry 8700 g with bluetooth function and Bluetooth Logitech headphones.
  At this moment, I have download the latest drivers from toshiba:
  Bluetooth stack
  Easy Bluetooth connection
  Bluetooth monitor

  The first time I installed the battery Bluetooth on my Windows XP / SP2 Machine.
  everything is ok...

  On the new start helping him material apears and installed Bluetooth RFBUS from Toshiba and a few more.
  After stopping and restarting, I have a magnitude of the 100% CPU usage.
  I start the monitor Bluetooth an i found new devices, but I can't connect to my Blackberry or my headphones...

  I think that the battery Bluetooth toshiba does ' t works well because there is the battery Bluetooth in XP/SP2 in the depths of the system.
  Can I use only Microsoft Bluetooth or only the Toshiba stack?

  Thanks for your replies
  Mike

  Hello

  In my opinion, you must use the MS Bluetooth stack or the Toshiba Bluetooth stack.
  If you want to know how to remove the battery Microsoft Bluetooth the OS with SP2, see Microsoft Knowledge base article:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;889814

  Good luck

• Tecra S1: After the VICTORY-start allways the mouse is moved without wheel

  Hello

  allways when I'm away from Windows XP Prof. I to set the mouse settings even once, to indicate to the system that my mouse is a wheelmouse.

  I open «THOSIBA Duales Zeigegerät» settings
  I guess in English
  "TOSHIBA Pointingdevice binary"
  Then he shows me the settings for a wheelmouse while I only agree with 'OK '.

  Maybe someone has the same prob or perhaps a solution because I get out of it.

  Best wishes
  Patrick

  Hello Patrick

  I use wheelmouse Microsoft on my Tecra M1 for a long time but never have similar problem.
  If the mouse is connected to the laptop runs the audio signal and the mouse can be used without any configuration or change parameter. Can you please explain to me where you see this option in the properties of the mouse tab double score?

  I can't find this option.

• Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  Hello

  I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

  The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

  How can I get out of this loop please?

  Thank you.

  Lucie

  Hello

  For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

  This recovery process is the manufacturer, not Microsoft.

  ________________________________________________

  You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

  See you soon.

• Tecra 9100 splash screen & installation of corrupt Boot but OK on XP

  Hello

  I just 'inherited' the laptop above and when I got it it had this weird problem. When starting and in "Setup" the display is corrupt. In the start screen, this corruption takes the form of rows of small white lines and dots on any screen, but the screen configuration (or splash screens where you see white low resolution written on a black background) a significant number of characters is defined in the incorrect character (mainly the graphics/Wingding characters.) Corruption exists if the boot & configuration screens are in "Stretch" or not. Its almost impossible to see what the settings are on the installation screen.

  However, if I leave the laptop to continue and to start XP, the screen works great, really clear and non-dead pixels or corruption.

  I tried re-flashing with the latest BIOS (windows method), I F-Disked, then put in shape, then re-installed XP and applied SP2, then all drivers; However, the problem remains.

  Someone has an idea what is the problem?

  Thanks much for any help you can provide.

  Hello

  Sorry, but on this path is not easy to imagine what it looks like, but it's very strange question. I have a similar problem with my Tecra M1. When I watch a video file with Real player and remove the actual window the entire screen is suddenly fuzzy and there are a lot of points with vertical white lines.

  Just restart can fix it. I put really know why this happen and I can't do experiments because I use for work. In my opinion before using the unit to reinstall with the recovery media. On this way the unit will be installed properly and it shouldn't happen.

  If you are recovering the unit and if this action solves the problem please let me know.

  Good bye

• Windows 7 x 64"looking for preconfigured folders' 10-20 minutes after the base peripheral USB pluging

  As in the question.

  Windows 7 x 64 'preconfigured search folders' for 10-20 minutes after pluging base peripheral USB - flash stick, mouse, keyboard.
  The installation of the drivers is displayed.
  The small circles looking for minutes and minutes.
  Then the message becomes - installation of the unit
  It lasts still minutes (5 to 10 or more)
  At the end some time, that the device is installed sometimes it fails.
  If I unplug the unit and plug it into another USB port - all again.
  During the whole process, the computer becomes very slow and unusable.
  The Task Manager shows CPU idle but there is no update on the user interface, new programs may not start.
  When the end of the installation then it catches up and everything opens and update with a normal speed.

  I have the same problem as Windows 7 Ultimate SP1.

  If a driver online is available for a USB device, it installs ok.

  If the system is based on the preconfigured drivers folder it will not install.

  I've removed all USB devices (including root hubs), reset and rebuilt the cache driver and nothing works.

  Rebuilding my PC will take ages! There must be a faster solution!

  I found the solution!

  You need to repair or rebuild Windows DriverStore. (which would make a reinstallation)

  You need access to a working Windows machine to solve this problem, but your PC will fix the driverstore himself.

  To do this:

  1) go to "C:\Windows\System32\DriverStore\FileRepository" from a working PC that is copied to a USB drive or a network share.

  (2) on your PC goto Device Manager and find the device that settles (look for the yellow triangle).

  (3) right click and select "Update Driver Software".

  (4) select "Browse my computer for driver software".

  5) navigate to the location of your good copy of the DriverStore

  (6) "Include subfolders" check and click Next

  Windows will now search the driver good store and will be re - install the pre-configured drivers.

  Ignore any warnings about the driver being unsigned and let your PC to install them.

  Work pilots will be given on your pc, the driver cache will rebuild and your device will start working.

  Hooray!

  If you move the device to another USB port it will now install automatically, as it should.

• After the Service Pack 2 update sound stopped working

  Recently, distributed with my laptop satellite. Everything was good and everything worked perfectly until I have download Service pack 2. Since the audio has stopped working.

  I'm a novice, but have you tried the following:

  I uninstalled the driver and downloaded the appropriate site Realtek drivers. reinstalled but still get the same problem. no error messages, but just "driver is enabled but has not been started" in the form of properties for the properties of sounds and devices.

  Can anyone offer a solution?

  Hello

  You re right. I read that on some laptops the doesn t work after installing XP SP2.
  But the instillation of update should help.
  Could you please put you name of the laptop?

  This page you will find a list of Windows XP Service Pack 2 models supported:
  http://support.toshiba-tro.de/KB0/FAQ5300V6000DR01.htm

• Satellite L30-SL33: unknown device after the device external USB connection

  Dear all,

  I bought a Satellite L30-PS33 with Vista, but due to driver with my existing peripheral equipment problems, I decide to switch from Vista to XP.
  I have an internal problem with usb HUB, even if the installation is OK with design windows XP drivers generic when I plug a USB key, I get the message: Unknow device.

  Can you give a link to find good drivers I should use in my computer?
  It is very difficult to use a computer without any USB equipment?

  Thank you and I hope you have any solution for me.

  Best regards.

  Chris

  There is no USB drivers for all Windows operating systems.
  Still is it USB driver are part of the Windows system and you will find not all drivers use 3rd for a USB port.

  In your case, I recommend updating BIOS and update Win XP to the last State. All updates and patches XP must be installed!

• After the effect CC does not sound

  My AE CC do not return sounds even I clicked on the menu without loss and take the audio option. My AE is the last version that I installed just 3 days back.

  Please can someone help me...

  See the last article here:

  known issues in after effects CC 2015 (13.5)

• After the upgrade to USB 3 Hub Ethernet Sierra is no longer works

  On my mid-2015 15 "MBP, I have a Sitecom CN - 340 USB 3 Docking station. Apart from all kinds of outputs, it has an Ethernet port, which I've been using for the last 6 months without any problems... until the update for Sierra. Since then, the report of control center that the cable is not connected. I am now connected via Thunderbolt. Has anyone noticed this too? And then knows how to fix? The latest drivers are February 2016.

  Kind regards

  Oliver Holmes

  It turns out that the problem is so the driver being old-fashioned. The chipset is the AX88179 and the manufacturer provides its own drivers here: http://www.asix.com.tw/download.php?sub=driverdetail & PItemID = 131

  So, all is well again.

  See you soon,.

  Oliver Holmes

• HP EliteBook 850 G3: HP EliteBook 850 G3: its problems after the update of Windows 10 anniversary

  Hi people!

  After the update of Windows 10 birthday I have problems with my sound card. There are two sound cards listed by Device Manager. The first is "Conexant Audio of ISST" and the second "Intel High Definition Audio". I know not weather it was the case before the update. I just recognized it after the update when I had sound problems.

  In any case, on a sound start works on the other boot it does not work. It seems that Windows chooses the sound card, every time when it starts. Sometimes it takes the bad sound card.

  I tried to uninstall maps its and their resettlement. On the HP site, there is a driver for the Conexant map bot no driver for Intel High Definition Audio card. 10 Windows itself is not find a driver for this sound card. I also tried to reinstall the other drivers, chipset drivers for example. But unfortunately it did not help. I also tried to disable the Intel High Definition Audio, but also without success.

  What else can I try? I don't want to reinstall Windows. There must be a solution without this. Any ideas? Here's a screenshot of my device manager, perhaps it helps:

  

  If you need more information, please let me know.

  Best regards

  Ty

  I just tried this driver and I still have sound after 6 resets.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1