TECRA 9100 battery problem

Similar experiences to mine, please?

After using no not my Tecra for some time (about 3 months). He was once again the charger for more than 24 hours and I'm now done with the original problem, I had the last time I used the Tecra, several months ago! The problem is, I think, only related to the tent to use it on battery, as follows:

At the start of the machine of 'cold', after passing the request of 'password' screen, it goes straight to a "small blue screen", which includes the message:

Hardware malfunction

Call your provider of support material

NMI: channel check / IOCHK

The system stopped *.

A little more information, I found that I can actually 'blue screen' situation - turn off not having don't no need to remove it battery that I first thought - and if I get the power cable then everything starts up well and seems to work normally. If I then remove the power cable (leaving the laundry to run on battery only) the small blue screen and same message reappears.

Yet once which seems to indicate a battery problem, I guess?

Has anyone else had a similar experience?

Post edited by: Gary S Cooper

Hello

Windows may indicate a fundamental error messages only when material occurrence malfunction, so that the elimination of the errors can be difficult for equipment problems. Most of the problems of material step in connection with the motherboard, the main memory on a motherboard or adapter or the stamp on a motherboard or adapter.

On this path, it is not easy to say what may be the problem. I don't know how old is the unit, but if the unit is still under warranty I advice you contact service partner chartered. I'm sure they can find what may be the cause of this problem.

Good bye

Tags: Toshiba

Similar Questions

  • Tecra M4 - battery problem

    Hello

    My Tecra M4 battery appears to discharge on his tours off the coast. If I charge it to 100%, then unplug it and don't use it for about a week when I come to turn it on it used and I need to connect to the mains. When he dose get Windows reports 0%. It seems to lose about 15-20% per day of power turns off.

    Anyone know if this is normal for this model of if there is probably a problem that I have to look at the dose.

    Thank you

    David

    Hello

    This is definitely not normal. I think you need a new battery. That this be enabled by service. You still have warranty, so it will be free.

    Good bye

  • The Bios Tecra 9100 battery

    I believe that my Bios battery has not in my Tecra 9100

    Two things...

    Can someone suggest a good place for their source to the United Kingdom?

    Also, someone has a pdf file tell you how to replace?

    Thank you very much

    Hey there,

    If your laptop is a Tecra 9100, she has 3 years international warranty and it's probably under warranty, and no debilitating defects, you can call 08702202202 option 1 and option 2 (it's the support) and they will direct you to a nearby Service Center or you can find the service centers in the website www.computers.toshiba.co.uk under support & downloads and find a service partner.

    See you soon

  • Problems of its Tecra 9100

    I have reviewed all 54 pages of messages of the Forum TE and Tecra here and found only one that relates directly to the issue I'm having. He titled "Tecra 9100 major sound issues" and has been locked, unaswered with the last post on 21 July with some response on the use of a new pilot.

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13809

    I recently bought two used Tecra 9100 (guarantee is expired, unfortunately) and they are both in great shape. I couldn't be happier with them, but alas, the sound came out on one. I checked through all the General solutions, Device Manager, reinstall drivers, purchase new sound card on eBay, test with a sound card in the other system of work...

    I tested the drive with a 16 MB SD card and a 1 GB card, of which none were detected (even though I updated the driver for that also).

    Installing the driver for the card his Yamaha returns a warning message telling me that "the driver has been installed not."

    I cleaned all contacts with alcohol and q-tips several times.

    There is no device not recognized in Device Manager.
    The OS is a new installation.
    The BIOS is updated to the latest version (ver 1.60).

    If there is someone tha can you please help me to diagnose more this problem I would be very grateful.
    Thanks to a bouquet.

    Hello

    According to your link that you have posted, the detachment was answered.
    The noise problem was caused by the installation of SP1.
    However, you have bought a second hand units and changed the cards his etc.
    Sorry, but no one knows what you have done on your laptop.
    I found that this unit has been delivered with a YAMAHA YMF753 sound chip.

    In addition, the SD card slot supports are not all sizes of SD card.
    Additional it doesn t support MMC and SD-card/o

  • Tecra 9100 wireless network problem

    I'll have a chance by putting my Tecra 9100 with my home wireless network. The network seems to work very well. My other laptop connects to it without any problems and I can connect the Tecra with the ethernet cable. But the wireless connection, it cannot be successfully established by the Tecra.

    She claims to be connected, but he receives no package, and could get no internet connectivity. When I try to 'fix' the connection, it sits there for a while before telling me that the IP address may not be renewed.

    I managed to connect the Tecra to the network of the next door without penalty, which suggests that there is some kind of problem with our network interface. I tried to reproduce the exact settings from my other laptop, so I don't understand what the problem is.

    Any idea would be appreciated with gratitude!

    Hello

    It's really not easy to say what is happening here. The functionality of the laptop is ok and it's very confusing if it works with other local wireless networks.

    I recommend putting your access point to the factory without some specific parameters settings and try to connect it.

    Sorry, but I don? have another idea.

  • Major problems of its Tecra 9100

    I hope someone can help me with this, it makes me crazy.

    I can't get the sound to work on my Tecra 9100. The system does not recognize that there is a map of his present. When I try to install the drivers downloaded from the Toshiba site, installation is going through the motions and then at the end it turns out that this error message: caution, "was not installed. That's all. I tried to uninstall, restart, fully updated Windows, even by the restoration of the system from the CD that came with the laptop... nothing works! Argh!

    Hello

    You are 100% sure that the sound card is not faulty?

  • Tecra 9100 - problem BIOS update/restore

    Hi all:

    A few days ago, I (declining misguidely) tried to update the BIOS on my Tecra 9100. Now on startup I get the message "BIOS (Block1) is damaged! (Call the repairman). Technician: Place the maintenance disk in the drive and press any key when ready "." I tried to restore the BIOS by following the instructions on the web page of the BIOS (traditional method using a USB FDD) driver - put on with the key immediately to the left of the SPACEBAR key leads to the message "ready for the update of the BIOS. Place the BIOS update floppy in the drive and press any key when you are ready to move forward. "The disk is regularly consulted and the laptop will beep every 10 seconds for a period of a few minutes. Then it stops, but should be repeated after any key is pressed. There is however, no change in the information in the form and no result just possible restart in the same error message on the BIOS damaged.

    Anyone can shed some light on what might be happening here? I'm afraid that I maybe should I follow a few instructions on the screen (as the instructions for the update of the BIOS suggest) that I do not see that the screen is not active? So I can't hit the correct answers when required. Should I really the military and its maintenance diskette? Is this disk available anywhere if I can do it myself?

    Any help or suggestions that anyone can give on this subject would be much appreciated - I don't want to go hunting a new motherboard unless it is absolutely necessary.

    Cheers, Chris.

    Hello Chris

    I am not a technician, but according to your assignment, I'm sure that your BIOS chip is damaged. I'm afraid of nothing that you can do everything alone. I recommend you call and explain the situation.

    I'm really skeptical you will find these special tools online.

  • Tecra 9100 - Ethernet is declining

    Hello

    I have Toshiba Tecra 9100 that I used to connect my ps3 to wireless internet. For some reason my Tecra is down the Ethernet of the ps3, the strange thing is if I turn the laptop off the battery only there is no problem but as soon as I plug I save it starts to give up the connection again.

    Any body know what is the problem?

    Hello

    To be honest, I don't have a specific answer to your question, but maybe you should try to install the latest drivers LAN and WLAN. Also check the properties of the device and make sure that all power saving settings are defined to the maximum level.

    In Toshiba surveillance tool when the laptop is connected to the power supply running set everything up.
    Intel Speedstep option implemented.

    I hope this will help.

  • Tecra 9100 does not supply power to the top

    Hello

    I got Tecra 9100 laptop computer and you have a POWER PROBLEM.
    Basically, it got stuck at the start of the OS and I was unable to click or move the mouse to do something. So I held the power button to turn it off. I do not turn on again entered game coz I had to go somewhere.

    So when I tried to move THE next day and he won't power upward. I can see a GREEN LIGHT but can not hear any CPU, the FAN, the monitor or the hard sound. When I connect to the AC adapter, I can see the LOAD LED but nothing else seems to be powered.

    I also tried to replace the memory Module, but still won't power upward. I guess that the motherboard does not have to be ABLE so nothing is turned. But the one thing that I do not understand why the POWER LED on (GREEN LED) is on, unless it has the power source.

    Can someone tell me what I need to do?
    Help, please

    Thank you

    Hi Sonia,.

    I suggest that you try to remove the battery and power supply so that all power of the laptop is turned off. Reconnect AC power and try to turn on the laptop. If it works, then re-install the battery. I think that the electronics of power sometimes get "stuck" and this procedure usually receives smooth them.

    If the unit still does not power on after having tried the above procedure, then I suuspect there must be a problem of internal material in which case you must take the device to a partner of Service authorized for rectification.

    Kind regards

  • Tecra 9100 blue screen when you disconnect the power supply

    Hi people,

    Im having a major problem, Ive had a major problem with my tecra 9100, when I unplug the power cable and try to use the laptop on battery, the blue screen comes up saying NMI: channel check / IOCHK

    then the computer shuts down, it restarts only properley if I plugged power of ext,
    also something to note, when I unplug everything first, he's not str8, its only when I try to use the laptop, which is pressing a key

    If someone knows something about this could you please let me know

    Thanks carl

    Hello

    This has been already discussed here in the forum:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13784

    Check the sanremo poster, which refers to the knowledge base article Microsoft!

  • Tecra 9100 ' NMI: channel check "BSOD".

    My laptop two years Tecra 9100 1.7 Mhz computer faithful began to get a very regular blue screen of death. This occurs only when it is running on battery power and the error message is:

    Hardware malfunction

    NMI: Channel check / IOCHECK.

    Does so within approximately 30 seconds 2 minutes of running on battery power.

    I was hoping that it was a problem with corruption of driver so I ve completely flattened the thing on day 1 with a full drive reinstall with 'the CD ROM product development' and the problem persists.

    The battery should t be worn, as I have little use, I even kept it out of the machine to avoid wear out that I almost never need to use the machine in a mobile context, i.e. There is a practically new battery! It's only in the past month (since I got wireless broadband) I used the battery at all.

    Just to remind the laptop is totally stable on the sector and never blue no screening while tension in this way. The problem occurs only when powered by a battery. I flashed the Bios up to v1.6 v1.5 with no effect. The problem occurs with a completely new install from the CD ROM recovery and also when it is fully configured with XP SP2 and all the XP2 post updates.

    Anyone any idea what's causing this error? Any diagnosis I could do?

    Thank you very much.

    Tony.

    Hi Tony

    Sorry, but I have bad news for you. This message occurs if there is a problem with the main Board. I can't say exactly what it can be, but I think that some piece of hardware is not recognized correctly.

    Contact the Service partner in your country and Tony let check the laptop.

  • Tecra 9100: No sound and unknown device

    I have the laptop above and have recently flattened and reinstalled Windows XP pro. I have no sound, I have a speaker in my sys tray, Device Manager detects the card Intel (r) 82801 CA/Cam AC'97 Audio Controller, after I installed the RealTek AC 97 drivers. I plugged in the headphones to make sure that this is not not the speakers who have blown. But still no sound. All volumes are turned upward and the volume on the front wheel is set in the middle. In sounds and audio in the Control Panel, all volumes are increasing and the speakers are set to portable stereo speakers.

    Any ideas?

    I have a unknown devices in Device Manager States location is a system compatible ACPI Microsoft from what I see on Google it's something to do with the battery. Once again any ideas?

    Thank you

    I know that your laptop. It s a Tecra 9100 and this laptop supports a Yamaha YMF753 - stereo 16-bit Sound Blaster Pro compatible sound card.

    The problem is the XP SP1 or SP2. The audio driver of Yamaha does not support SP1.
    Seems that you need to update the audio driver.

    Please check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24622

    and

    This Toshiba solution site:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000001b59

  • Tecra 9100: Delayed write failed - hard drives on their way?

    Hello again,

    I am a member of the Club feared messages error "delayed write failed" and some of that my hard drives are to blame.

    These errors pop - up when a large enough facility is in place, or whenever my system is written something great for my hard drives (which I might have to wait a while to complete). It happened before installing the battery Bluetooth Toshiba. My laptop has finally frozen during installation and all I could do was to move the cursor. 30 minutes in the installation, I get several of these stupid error messages. They say ' delayed write failed - file C:/xxxxx/xxx/xxxx was not justified perhaps due to a connection or hardware problem "(or something like that). When the message window there is almost no way to escape in out makes a power off. But when I turn on the back, I get the blue screen of death that checks my record of inconsistencies. It is very annoying and disturbing because it means probably that my hard drives should be cracking up.

    After doing the search several times on the issue, I know it's my hard drives fault for sure. I have two hard drives; They both give me error messages. They must be on their way, after all I bought this 2nd hand computer laptop and they made noises strange "at delay." Recently, I noticed once they made a "beep" "beep". Never heard before so it cannot be good.

    In any case, I think that I need new hard drives. Can someone recommend me one or two who are used to give me these error messages (and are relatively cheap at least 30 GB)? Thank you

    P.S when I opened the PC health since the Toshiba Management Console it says '' drive S.M.A.R.T (disk 0) may fail soon. '' Ouch.

    Hello

    Each HARD disk with adequate material specifications may work on the Tecra 9100.
    The HARD drive should support an interface IDE (ATA-5) and should not be larger than 60 GB.
    I'm sure that BIOS Tecra 9100 will support 30 GB, 40 GB and perhaps also the 60 GB.
    But the larger sizes of HARD drive might not be recognized by the BIOS correctly.

    By the way; You can make a call to the Toshiba authorized service provider in your country and could order the compatible HARD drive.
    In this case, you will be sure that the drive is supported and runs without any problem to 100%.

  • Tecra 9100 does not start, power light flashes

    My tecra 9100 is boot is no longer, when I press the button works / laptop acts although it will start up (only for a second sheet) but instead completely stops and the light starts flashing in a sequence of (short 2, 1 x long, 2 short, 2 long, 1 short). I really need help, and I was wondering if anyone has had the problem before and knows how to solve this problem.

    Thanks in advance

    Tayler Hughes

    Hi Thibault

    I'm afraid that there is a problem with the electronic board. When the power led is flashing, it sends the hex code. This code should help technicians to see what the problem is with the laptop.

    Only thing you can do is remove the battery and try to boot up your laptop. I don't think this will help, but you can try. If the same thing occur, you must contact services partners in your country and ask for help. Sorry! :(

  • Tecra 9100 won't boot to the top

    Hello

    My Tecra 9100 will not start at all. Battery and disc hard drives light up but the machine does not illuminate and etc. cpu fan does not turn. I don't know if anything burned on the main panel, etc. that would stop it boot in the bios.

    For any help or suggestion would be appreciated.

    Thanks in advance.

    Hello Steve

    Sorry, but if there is any sort of reaction and if you are not able to enter the BIOS settings which suggest serious hardware problem. On this path, it is not possible to say what the problem is. Unfortunately I put t see any solution it and I guess the unit must be sent to the service partner.

Maybe you are looking for