Tecra 9100 does not start in windows-black display

Similar Questions

• My Tecra 9100 does not start correctly

  Hi all
  Please give me some advice.
  The last time I used my tecra 9100 that it functioned very well. Then yesterday I turned it, it seems not initialize properly for the first seconds (light flashing disk showing done something) and then I heard a beep, and although the power was on, the hard drive light exploded.

  Also during this time, my screen was completely black like when the laptop is turned off and has not changed at all.

  What is going on? I can't know if there is a problem with my screen or the real hard disk (?)

  I of course rebooted and rebooted and no change.

  Any help would be greatly appreciated

  Hello Hans,.

  You see the Toshiba "splash" screen when you first turn on your notebook? If you do then the display isn't obviously faulty and the problem will be with your hard drive. If your screen remains blank from the moment you turn on then it is most likely that you view is faulty.

  It could, of course, also have problems with other components that cause the symptoms you describe, for example a failed motherboard.

  HTH

• Tecra 9100 does not start

  Hello
  I have this laptop from my desktop without CD/DVD and HD and without battery (but with external power supply). I put a memory inside and when I start it there is 1 and on 2nd and 4th.
  I don't hear any fan, and he seems to be dead.
  My questions are:
  1 need the CD/DVD or HD to start (or run the fan)? Would be - this SD card enough to start the fan (I just want to know it works before you buy the rest). How to check?
  2. why 4 led is on - there seems to be a HD led (from the image beside him)?
  I rather expect an answer if it is normal in this type of configuration to have on (although it seems odd that no current HD).
  3. is it 5th conduit (which is disabled) indicate the presence of cd (I have no manual)
  4. is it question which Bank is my game of memory dead (I have a chip)
  5. why my 6th led is off - does it mean at this point already wireless does not work (or it is turned off because it does not work yet as it can come later in the boot sequence)

  see you soon

  There is a website where you can check if the memory purchased modules u was compatible. internal battery lithium (not the laptop battery) can also be on its way? I could be wrong, but I think it should be to check the basics first.

  Lisa

• Tecra 9100 does not start, power light flashes

  My tecra 9100 is boot is no longer, when I press the button works / laptop acts although it will start up (only for a second sheet) but instead completely stops and the light starts flashing in a sequence of (short 2, 1 x long, 2 short, 2 long, 1 short). I really need help, and I was wondering if anyone has had the problem before and knows how to solve this problem.

  Thanks in advance

  Tayler Hughes

  Hi Thibault

  I'm afraid that there is a problem with the electronic board. When the power led is flashing, it sends the hex code. This code should help technicians to see what the problem is with the laptop.

  Only thing you can do is remove the battery and try to boot up your laptop. I don't think this will help, but you can try. If the same thing occur, you must contact services partners in your country and ask for help. Sorry! :(

• Satellite C55 - Has - 1 L 0 does not start in Windows 8

  Hey guys.
  I hope you can help me a bit.
  I have a Toshiba Satellite C55 - has - 1 L 0 here and it does not start in Windows 8.

  I turn it on, the Toshiba start screen appears, and then I get a message on a black screen saying "media control" (failure) and after a little while "no boot device. Please restart.

  I checked the BiOS and it does not see the hard drive (said HARD drive - no) and even in the boot order list, I don't get a list with the DVD drive with the exact name, but for the HARD drive.
  I tried to do a recocery with the F12 key and get the list to choosw where I want to start but by selecting the disk hard does not work.

  So I thought I'd try a live distribution of linux to see where is my hard drive and back up my data (after some settings in the BIOS - boot CMS mode) but I can't find there too. (I have a file fstab and mtab, it would help if I posted it here?)
  Is my HARD drive broken? Can I try something else?

  Thank you very much!

  You are right. This issue should be fixed by the authorized service provider.
  Furthermore, why do some risk steps to check this problem, if the warranty is valid.
  Warranty will cover the repair costs.

  Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  Good luck.

• Satellite A200 - support Button does not start when windows starts

  Hey,.

  Today, I decided to disable unnecessary programs as many as I could (to speed up my pc), so I went to Msconfig (I have vista home premium 32-bit) and a lot of things off. Including the "toshiba button support. The next time I restarted my additional buttons on the top of the keyboard all worked, next to one. Who normally turn on windows media player. This time, he did nothing at all. Game/resume, stop, forward, back and button internet all worked without problem.
  However, I really liked the WMP button, so I tried to find out what the problem was. I discovered that it was the support of the key, so I decided to reactivate it.

  However, this didn't not help: (.) I turned it in msconfig, but it does not start with windows more: (.) I know this is the program that I need, because when I run the program manually (this is the program: programfiles/toshiba/TBS/HSON.exe) the button works.
  I put a V in front of the msconfig program, but it does not work. Anyone has an idea why not?

  Edit: I found a solution, even if not the best. If anyone still has the same problem:
  I made a shortcut for the program to run (can be found in C:programfiles/toshiba/SCT and is called HSON.exe). Then I clicked start and said 'all programs', here I chose the "opstarten" folder, it comes to the Dutch version, but my guess is it's called something like 'start-up' in English. In this regard, I glued (copy / cut-> paste) the shortcut to the program, and now he begins again :)

  Hello!

  I agree with Akuma. You should try to reinstall the Toshiba value added Package. This determines media keys FN and all special functions on the laptop buttons.

  Search on the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Tecra M2 does not start successfully - zeroes appear all over the screen

  Help!

  My Tecra M2 does not start. After the toshiba logo, a series of zeros (0) appear all over the screen.

  -suspect it is caused by a virus, I formatted the HD (in another PC), but still the zeros appear
  -I might want to start in the DVD player, it seems to read the disc, but nothing happens, just a cursor flashing at the top left of the screen
  -J' I reset / replaced the RAM, but still no effect.
  -the power button works, lights and shuts the laptop but does not start.
  -CPU fan works
  -LED indicators of work are power, battery, dvd, wireless. Does not have HD LED light on.

  Any suggestions on how to solve this problem is greatly appreciated.
  See you soon!

  Hello

  I think we can exclude HARD disk failure because you are able to format it in another computer.
  As you suggest the RAM modules has been replaced but the problem persists
  So in my opinion, a motherboard problem would be possible

  But as you know, it of really difficult to say what might be exactly wrong
  I think that the technician should check the laptop then it would be possible to say what part is malfunctioning

  In any case, I think a motherboard might be affected

• HP 250 g3: hp 250 g3 does not start with windows 8 ir says the GPT partition style

  HP 250 g3 does not start with windows 8, it is said GPT partition style and custom boot that I have fomarted the hard drive... Please help

  Thnx man always the same thing, but I deleted all partitions and then I was able to start...

• NFS Carbon does not start in Windows XP a black screen and hangs

  NFS Carbon
  Carbon NFS does not work under windows xp... freezes and the screen shows black! Please help someone...

  Hi VikasSinghXV,
   
  Try to update the graphics card drivers by visiting the manufacturer's website and see if it improves the situation.
   

  See this link for more information on the update of drivers:

  How to manage devices in Windows XP

• Tecra A6 does not start with battery only

  Hi all
  I'm having a strange problem with a Tecra A6 I picked up recently at the refurb because it does not start with a battery only: it starts only when / sector is also connected, but eventually DΘmarrer on battery alone (and works fine) with the power cord removed shortly after pressing the power button. It's just on battery alone, I get no answer by pressing the power on button (so the power outlet must be set at this first stage or I don't get anything).

  Now I'm wondering if maybe it's the battery voltage? It seems that there are 2 options for this model, a 10.8 v and the other at 11.1V. With loaded Windows and Hardware Monitor reports running the battery is at 0% wear level and cool until completely (so I don't think that the battery is faulty), but it indicates that the battery is running at * 11, 1V, * but the battery installed is actually the * model 10.8v*. Could that prevent any power on only to batteries?

  More information on the model I have:
  Tecra A6-PTA60E-0EJ013EN
  CPU: Intel Core 2 Duo T7200 2.0 Ghz
  2 GB of Ram.

  Thanks in advance for any help on this one. Essential, I would like to know is if I have a 11.1V battery to run this model correctly (and get it) on battery alone. If the voltage makes no difference so I guess it must be a weird motherboard problem and I need bother not buy a new battery.

  > Will have to buy another battery and see if the same thing happens (I'll know then if it is the motherboard), but in the meantime if anyone can let me know if the voltage is serious I would appreciate it.

  To my knowledge, the batteries for Tecra A6 should take in charge 10.8V
  There's piles more strong for example 5200mAh but the voltage must be the same 10.8

• Tecra 8000 does not start after the BIOS update

  From one day to the other does not start my Tecra 8000 (400 MHz/256 MB BIOS 9.30 for years). After start-up, the disc starts to turn, but the screen including the backlight remains completely black, without red logo TOSHIBA BIOS is not accessible.

  I got a new mainboard on stock, so I replaced it, and it worked. Unfortunately now my WLAN card now did not work properly. I tried several settings of the BIOS with no results, so I decided to do an update of the BIOS from 7.50 to 9: 30. After the upgrade, I get the message "ROM WRITE successful, utility completed. LEADER BIOS: Tecra8000 v 9,30 ". Because what either kept silent, I pressed the power button to restart and heard a long and many short beeps (endless). I could interrupt what pressing the powerbutton for 5s.

  After turning on again I have the same problem as described in the first line :-( I can't get into the BIOS, but I can again update (with pressed F12). Once again these beeps.

  What to do with these beeps after average BIOS update? I replaced the MoBo connector LED with pension. Processor, memory, keyboard and HD has remained the same. So, before I start disassembling the machine, please notify, your help is very appreciated.

  Hello Joachim

  I'm not a technician and don t know what the beeps but I am afraid that the BIOS chip is damaged. Because of this, the unit is completely dead. Sorry, but I really don t believe you can do anything. Maybe the new motherboard again :(

• Why Tecra A3 does not start from CD/DVD?

  My laptop Tecra A3 does not react to the BIOS setting asking at the start of the CD/DVD.

  CD/DVD is the first place in the list of bootable devices (defined through F12 in boot sequence) the operating system starts with the HD. I have a chance to start with a bootable CD!

  The configuration is the following:

  Tip: TOSHIBA EAT10/EAT20
  BIOS: TOSHIBA V2.80 10/25/2006

  Any advice is welcome!

  Thanks in advance

  Antonio Giarrusso

  Have you tested with different CD bootable?
  Also try to start computer laptop using F12 and choose ODD as the first boot device.

  You can use ODD in Windows OS preinstalled?

• t460p does not start after windows birthday 10 update of 1607

  Hi, please help

  I had a birthday windows 10 update of 1607

  It inexplicable the pc, and the screen went black for more than half an hour.

  Now, my t460p will not start any longer, he stops on the red square of lenovo, sensor power print, button and finger are lightning,

  I don't come to a bios, pressing ENTER while booting does nothing.

  How can I boot my laptop?

  Thanks for the help!

  In response to the reports of the Lenovo ThinkPad systems client does not start with a screen as expected after the upgrade for the update of Windows 10 anniversary, Lenovo has provided a workaround solution.

  A TRICK of Service has been made available here: https://support.lenovo.com/us/en/solutions/SF16-T0077

  Thank you

• C50-A0113 satellite does not start in windows

  Hello.

  I have a toshiba satellite laptop C50-A0113 8 64-bit windows running.

  Ive had exactly two years a few days ago I restarted and then when it starts up, it stops at the screen "Toshiba leading innovation" and then he said: scanning and repair drive C, while on this screen it starts the process and then stops at 34%.

  It was two days ago now it just gets stuck on the "screen toshiba innovation leader" and then after a few minutes, it says preparation auto repair.

  Then he leaves the screen and goes to a screen black for a few minutes then flashes the blue screen written "your computer has encountered a problem" then restarts.

  I tried to create a bootable windows disc 8 in order to repair, but it does not start even in the usb port.
  I restart and press f12 to select the media to begin. It checks the media goes to the toshiba screen, then everything goes black for a few minutes until what it restarts.

  Can I please know what is the problem and how can I possibly fix it because the problem is clearly not my hard drive.

  I have removed and put into another laptop and it was fine

  Hello

  If you want to start Notepad using external media (such as a CD or USB flash memory key) you must disable the secure in the BIOS boot option.

  If you want to install Win 7, you must also pass the CSM mode UEFI Boot Mode.

  For me it of not quite clear if you created the recovery media (flash memory stick or disk)

  If you created one in the past, you could use this recovery media to put the laptop back to factory settings.

  In the case where this is not possible, some of the material (perhaps HDD) could be affected.

• Windows 8 Pro does not start after windows update updates for April

  Hello

  Pulled up to my PC this morning and was asked to install updates from windows update. Check the list, there are 11 important available updates. I have unchecked and hiding implementing Nvidia updated as I want to do the updates of my GPU myself. Installed the remaining 10, completed and has been asked to restart my PC.

  The problems starts here; I am more able to start windows.

  It is past the bios screen, shows the blue flag with a circle of rotation below and then... nothing more than a black screen and my screen goes to mode 'sleep'.

  I tried to start in safe mode minimum clean using a prompt (bcdedit/set {default} safeboot) repair my installation disk option, but it does not start even in safe mode.

  I run system restore turned on so that the option is not valid for me.

  The system is now check the disk for errors, but it seems to hang there as well as happens for more than 2 hours now...

  Any way that I can return the updates of windows on the outside? Any other suggestions than the reset of the installation disc?

  Spec: Evga x 58 classified 3, Intel Core i7 950, 2 x Geforce GTX 580 in SLI, 12 GB Corsair Dominator GT DDR3, Corsair Force 3 SSD 128 gb, Dell u2711 2560 x 1440. Win Pro 8 x 64, completely up to date with the latest drivers. PC worked perfectly up to this Point.

  Disappointed that the "major updates" Microsoft kills my work machine.

  Problem solved now and it was the update of KB2808735 who was / is the origin of the problem.

  I placed my SSD into another computer and was able to pull up in SafeMode off and remove the updates.

  Installed all the updates one by one until it chrashed again installing the update mentioned above.