Tecra 9100: No sound and unknown device

Similar Questions

• Tecra A2 - lost sound and ConfigFree, what should I do?

  1. the device does not work, the "Sounds and Audio Devices Properties" indicates "No. Audio Device. Attempted relocation Sigmatel Audio and RealTek HD audio, but without success, what I try next?

  Also, CofigFree does not work despite having tried a reinstall, at startup, an error message appears saying "not found TOSHIBA Network Device Usermode i/o Protocol. Please reinstall ConfigFree'... How can I fix it?

  Thank you very much!

  I m wondering what you did cela sound and Configfree don t work anymore?  :|
  Regarding the sound issue:
  First, you must remove the software from Realtek sound system manager.
  Control Panel-> software

  Then go to Device Manager and remove the sound card in the list of devices (simply mark it and press DELETE).
  After that restart the laptop, wait for windows would ask the audio driver and then point to the driver files that you downloaded from the Toshiba driver page.

  Regarding the ConfigFree:
  Usually the Configfree should work. If there is something wrong then you should uninstall the Configfree first.
  Then you must restart the computer laptop and recommended to clean the registry using the CCleaner (it s free do google)
  After this attempt to install this new.

• HP probook 6570b: 6570b hp Base system device and unknown device

  I have hp 6570b with os win 7 Professional 32 bit.it appear in Device Manager that there is a need driver software.it shoes Base system unit hardware and unknown device...

  Hardware ID base system device

  PCI\VEN_197B & DEV_2392 & SUBSYS_17AB103C & REV_30
  PCI\VEN_197B & DEV_2392 & SUBSYS_17AB103C
  PCI\VEN_197B & DEV_2392 & CC_088000
  PCI\VEN_197B & DEV_2392 & CC_0880

  Unknown device hardware ID

  ACPI\HPQ6000
  * HPQ6000

  Hello

  Should be below card reader driver.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212928 & swItemId = ob_115197_1 & lang = to & CC = US

  And HP 3D DriveGuard on the following link.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212928 & swItemId = ob_110813_1 & lang = to & CC = US

  Kind regards

  DP - K

• Satellite P30-145: is not an audio device in 'sounds and Audio devices '.

  Hi guys,.

  I've just corrected a problem with the help of a member of fantastic, but now I have another!
  My speakers suddenly decide to not work! I checked the volume etc. and alll was fine, but when I went to control panel > sounds and audio devices, it says I have no audio device!

  It worked fine this morning and I have nothing done havn't who could have done this.
  These problems I encounter are just spontaneous, I don't know what is happening!

  Anyone know how I can fix it and if nobody suspects the virus activity? (I did a scan that says that I don't have)

  I use a P30 145
  Thank you very much

  Hello

  Have you checked the Device Manager? The sound card appears correctly in the Device Manager or yellow exclamation marks appear?

  Have you tried reinstalling the audio driver? If this isn't the case, please try it.
  Of course, I recommend also updating the anti antivirus applications and scan the system for viruses and malware

• Server 2K 8 Remote Desktop no despite its "don't bring to the local computer" active, impossible to find sounds and Audio devices?

  I'm running Vista 64 to connect to a remote computer that has Windows Server 2008. When the remote desktop connection via, under the options for sound local computer that I "Make to this computer" activated. However I still get all the sounds, and the volume in the lower right corner icon has a red x on it. Under the heading reading devices, it says "no audio device is installed". In Device Manager, I don't see anything for sound and audio devices.

  I found an article that mentioned the sounds and Audio devices in Control Panel, however I have only 'His' option - which opens the same as right click on the volume with mute icon and choosing of reading devices. I don't see anything on the RDP Audio Driver settings.

  Here's a screenshot of my desktop remotely, with the Control Panel, Device Manager, and open windows of his:

  http://img27.imageshack.us/img27/959/screenshotxqp.jpg

  How to activate the sound remote desktop?

  Hi Tsaton,
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums, since it is linked to the issue in Windows Server 2008 machine. Appropriate in instances of Windows Server.

  Please post your question in the Forums of Windows Server.

• I can't change "sounds and audio devices" in the Panel

  original title: I can't change "sounds and audio devices" in the control panel after the update my card NVIDIA vidio driver and Microsoft DirectX in my Windows XP SP3 update.  How can I fix it?

  I recently updated my card (NVIDIA GeForce 6800 GT) video driver and Microsoft DirectX after you have experienced a problem with a casual game.  That fixed the problem, but then I noticed that my sound 'e-mail notification' had failed in its original supplied with Windows.  I changed "Sounds and Audio devices", registered, registered as a new regime, etc., and still plays the old default Windows sound.  It was the only noise I had on Windows.  When I check "Sounds and Audio devices", the sound, I have chosen is the one listed, and it does not play when I check, but when the mail arrives, I hear the old Windows by default.  I don't know if the updates, to happen or not, caused only that it took place at the same time.  Thanks for any help you can give.

  Thank you for your suggestions.  It turns out that my e-mail client, "Eudora", had somehow reset the default mode in the Windows sounds.  I forgot that there is a choice to "Be careful" in Eudora Tools.  After I changed it back, it worked perfectly.  Once again, thank you to answer me.

• Tecra 9100: Circle sound card - yellow in Device Manager

  I have a Tecra 9100 using win XP pro SP2. Recently, my sound disappeared, and I use the card his Yamaha AC - XG. The unit displays a with a circle yellow exclaimation mark. I tried to use the help to solve this problem, but still works cant, also tried to download the drivers to date but did not help either.
  Is it possible to fix this problem.

  Hello Bernard

  I have the same unit pre-installed with Windows XP Home SP2 edition too and I installed the audio driver Yamaha 6.13.10.2152 version and it works well.

  Test if you wish.

  Good bye

• Tecra 9100: Jumpy cursor and scrolling are not smooth.

  Hello

  I have a problem with my Tecra 9100 that after moving my cursor for a few seconds, he rushes toward what direction I pointing me. It's very annoying. As well as this, when I the scrolling is not smooth at all, but as the slider, he "jumps." So when I try to scroll down a page that I have to be careful because he could jump right down! Thought I should also mention that drag Windows is too jumpy.

  I'm almost certain that these three problems are all related to each other.

  Before, my laptop was good with any of the above problems. It was until the error messages say "delayed write failed" popped up unexpectedly. Those errors, which I found to be associated with the hardrive does not properly.

  Optimisticly, I formatted C drive and put on a new installation of Windows to see if that would solve my problem. Surely, he would do?... Nope. How I download the driver of my laptop MouseWare comes with?... Still does not solve the problem.

  I run out of ideas and do not think that my problem will be solved by a software update. I think it's to do with my hardware (namely talk, hard drives). I have 2 hard drives. Either way, the error messages "delayed write failed" appears on both my hard drives.

  Answer please, thank you.

  Great info. Thanks for sharing

• HP Pavilion dv8-1099eo: device Base system and unknown device drivers Windows 7 Ultimate lack

  Hello

  Since a new installation of Windows 7 64 bit it is has little material without driver on all simply not recognised. Here is the hardware ID's I hope someone can help get this sort? Laptop computer runs much slower with the CPU it has. An upgrade from 4 GB to 8 GB of RAM is useful?

  1. base system device

  PCI\VEN_197B & DEV_2384 & SUBSYS_7001103C & REV_00
  PCI\VEN_197B & DEV_2384 & SUBSYS_7001103C
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

  2 - system base unit

  PCI\VEN_197B & DEV_2382 & SUBSYS_7001103C & REV_00
  PCI\VEN_197B & DEV_2382 & SUBSYS_7001103C
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

  3. base system device

  PCI\VEN_197B & DEV_2383 & SUBSYS_7001103C & REV_00
  PCI\VEN_197B & DEV_2383 & SUBSYS_7001103C
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

  4 - unknown Device

  ACPI\ENE0100
  * ENE0100

  Thank you

  Michael

  1, 2 & 3 is listed under "Driver-storage" JMicron card reader  ACPI\ENE0100 should be ENE CIR Receiver Driver under "driver-keyboard, mouse and input devices.

  On your page of Support here:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-DV8-1000-entertainment-notebook-PC-series/4011373/model/4040272#Z7_3054ICK0KGTE30AQO5O3KA30R1

• HP Elitebook 8570W: driver problem: other devices - device base system and unknown device.

  Hi guys,.

  After doing a clean update on my HP elitebook 8570W I had a few unknown devices in my device manager.

  The first is a device called "base system" in PCI Slot 2 (bus PCI 36, device 0, function 1). I tried everything in my ability to determine what is this device and what drivers to install, so far without success.

  In the same section. other devices, there is another unknown device on PCI Express Root complex that gives me the same headache.

  I hope you guys can help me understand this.

  If you need further information, I will be happy to provide that.

  Kind regards

  Didier

  Hello:

  The base system device is certainly the JMicron card reader needs the driver, not the alcor one.

  You need this driver...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5257503 & swItemId = ob_124666_1 & swEnvOid = 4158

  If the driver above does not installing it automatically, try to install manually.

  To manually install the driver, go to Device Manager, click the Base system device.

  Click the driver tab.  Click on set to update driver.   Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  The file is located in C:\SWSetup\sp63637

  Make sure that the include subfolders is selected and see the driver installs like that.

• Pavillio dv6-6b07tx: Iin missing PCI device dirvers and unknown device

  In the Device Manager under

  Other devices

  I have the following below two marked messages - by their appropriate hardware ID

  I could not find the proper all - drivers update of all kinds of drivers from the HP site appropriate - I updated the drivers from the chipset of this Web site.

  Are you able to help with this one, as it's a bit frustrating gettign, even if all my apps / damage / printers etc seem to work normally?

  Thank you

  -PCI device

  PCI\VEN_10EC & DEV_5209 & SUBSYS_3388103C & REV_01
  PCI\VEN_10EC & DEV_5209 & SUBSYS_3388103C
  PCI\VEN_10EC & DEV_5209 & CC_FF0000
  PCI\VEN_10EC & DEV_5209 & CC_FF00

  -Unknown device

  USB\VID_138A & PID_0018 & REV_0078
  USB\VID_138A & PID_0018

  Hello

  Should be the card reader driver.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55104.exe

  And validity sensor driver.

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56403.exe

  Kind regards

  DP - K

• found new hardware wizard appears and unknown device device Watch Manager

  Since a few days ago, the Add New Hardware Wizard keeps popping up. I looked in Device Manager and found an unknown device (yellow exclamation mark) should I delete the device? I don't know what to do to identify which device is unknown.

  If you remove it, then he'll probably be back the next time that you start.

  go to start / all programs/windows update (at the top of the list of the menu), custom search, watch your optional hardware updates and search for a driver that you have not already installed, you can get lucky. Otherwise post the details of your specifications and ask again.

  Furthermore, it can take a while to get the pages updated and you may need to install active x on the way, a line will appear at the bottom of the fixed part of your browser screen (the same as when you download) If this is the case, click on it and install active x, then a box should appear and tell you allow I think.

• PCI devices and unknown devices

  Hello

  I use HP Pavilion 15 Notebook PC 15 - n230se.

  I installed windows 8 successfully but I still lack the following drivers:

  PCI devices

  Unknown devices

  Unknown devices

  Please fix this as much, I searched but impossible to repair.

  Thank you and best regards,

  Naeem Nayer

  You are the very welcome, Naeem.

  You need the driver for this device...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123643-1&cc=us&DLC=en&LC=en&OS=4158&product=6762375&sw_lang=

  You should not need to uninstall all the drivers to install the card reader driver, but if you have not installed the chipset driver, you must download and install this one first and reboot the computer before installing the driver for PCI device (card reader).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

  Best regards

  Paul

• T400: Serial device Base system, Port PCI and unknown device

  Hello!

  I installed Windows XP Pro SP3 (unattended) on a new T400 and i've got some unknown devices.

  Screenshot from Device Manager

  Lenovo's SystemUpdate died (May 09) a 'haven' t of the devices of wich idea I forgot to install.

  Anyone have any ideas?

  Thank you for any help!

  Sulotuion:

  PCI Simple Communications controller:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-70313

  PCI serial port:
  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-70317

  Base system device:
  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-68053

  Unknown device:
  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-70123

  Thank you for the mental help :-)

• Windows 7 Home Premium 64-bit with Canon IP6600D printer and unknown device

  I have a Windows 7 Premium build with a Canon Pixma IP6600D printer.  It worked sporatically at first with my Windows 7 until recently.  Now, I get an unknown device and the USB Plug N Play reports that it is not recognizing the device.  The USB port on the printer is good as it works perfectly on my XP machines and the USB port is on the PC as the other devices are recognized without incident.

  I tried stuff Device Manager usual for updated driver, updates the window, etc.  As this is a printer compatible 64-bit of Windows 7 (with some minor limitations), I was wondering why all drivers for Windows 7 is not recognize this printer.  Printer is good, USB is good, the cable is good.  Of course, the OEM driver disk is more compatible to reload the printer because it is a 32-bit application.  So, I rely on Microsoft Windows 7 drivers Canon for the deal.

  Just got off the phone with Canon and they confirm that the driver of Windows 7 are compatible plug-n-play and all I need and that Canon does not provide one direct driver other than the Add on Windows 7 x 64.

  Yet once, I ran all the windows and the driver updates to say everything is as current as possible.
  Next?

  THX.
  AGE

  Get the 64 bit Vista http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=357&modelid=11864&default_os=windows_vista driver and install it, then the add-on (if you need it) on the same page, but change the OS to Windows 7 64-bit.