Tecra 9100 - required accupoint driver for XP

Similar Questions

• Equium A200 - windows requires a driver for Microsoft ISATAP Adapter

  Hello

  I am a complete newbie at this forum and came looking for help. I recently bought an Equium A200 laptop computer with Vista preinstalled.

  Lately when I start the computer and log in to Windows, I get a message that windows requires a driver for an unknown device and ask for permission to connect to the internet to find the driver concerned. When I click on this option, I get a message saying that the computer has found the driver but has encountered an error trying to install "Microsoft ISA TAP adapter".

  What is it and why should we need for installation? I thought it was quite strange. Any ideas people?

  Any help will be much appreciated.
  J.Sutton

  Hello

  I searched a bit in the Microsoft Knowledge base and discovered that this symptom appears on computers running Windows Vista.

  http://support.Microsoft.com/kb/932520

  Microsoft recommends that ignore this error message. This error message does not indicate a problem with the adapter, computer or any other device. The adapter will continue to function correctly.

  Here are more details;
  + Microsoft ISATAP what inter Site Automatic Tunneling Address Protocol device is used to help the transition to an IPv6 infrastructure companies. Map ISATAP encapsulates IPv6 packets with an IPv4 header. This feature allows the customer to carry IPv6 traffic over an IPv4 infrastructure. This approach allows organizations to migrate slowly to an IPv6 infrastructure without having to spend too much time and financial resources to convert the new infrastructure. +

  Concerning

• Tecra 9100 - which HARD drive is bigger than I can use?

  Hello

  I just bought a second hand Tecra 9100 with a 40 GB HDD (not yet received but it is in transit).
  I would like to exchange the hard disk and put a bigger but in one I was wondering.

  What is the largest disk in the BIOS will support?

  Thank you

  Hello

  This forum contains a large number of threads for similar issues.
  Why you n t use the option search and the search for similar topics?

  I found these threads:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=146617

  Here in this thread someone updated the 80 GB HARD drive
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=76045

• Tecra 9100 unrecognized hard drive

  Hello
  If I replace the hard drive in my tosh bios indicates no hard disk is installed.
  The new hard drive is MK2016GAP I tried with and without the master/slave relationship.

  Clues?

  Hello

  The MK2016GAP is a 20 GB HARD drive.
  I searched the Internet for the Tecra 9100 and discovered that the phone comes with 40 GB or 60 GB HARD drive.
  BIOS shouldn't t so no problem with the size of the HARD drive. The size of the HARD drive is certainly supported.

  So I think it's a problem of jumper or you did not connect the disk HARD corectly.
  I put t know how the jumper was set to your old HDD, but you should check the position of the jumper and put it also on the new HARD drive.

• Tecra 9100: Unknow device - driver modem XP needed?

  Hi guys

  "Unknown" is listed in the Device Manager, I guess that's the modem because no modem is listed in the Device Manager or connections. So I downloaded the driver modem XP Toshiba Web site but does not. Then tried the XP 9000 modem driver, no joy tried 9100 2K driver, still no joy all the info I've found points to make it a Toshiba driver made so I'm stuck. Although 1 site suggests that perhaps a Scopio Agere, tried, but has always failed.

  Anyone know where I can get the modem for a laptop Toshiba Tecra 9100 XP driver please?

  Thank you
  Scott

  Hello

  Are you sure that the modem is an unknown device at 100%?
  I found this document Toshiba how to identify an unknown device:
  http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

  Unfortunately, all I can suggest to check the page of the Toshiba driver drivers or you check tools and Utilities CD for the drivers.
  The other possibility is to use the Toshiba Recovery CD to recover the operating system.

• Re: Tecra A7 - Win XP driver for PC card Type II card necessary

  I have not found on the toshiba site, the driver for the PC card slot for 1 x Type II card, type: slot Express Card?
  where is it possible to download?

  The slot for PC card requires no additional driver and, therefore, the driver isn't available for download

• Re: Tecra 9100 - new HARD drive is not detected

  I have a Toshiba Harddisk provide a Tecra 9100. Checking the BIOS it shows "Enhanced IDE", but you are trying to boot from the disc does not work HARD. Even trying to install a new operating system present, that the HARD drive is not detected.
  From the laptop is also very long.
  Any idea?

  Your new HARD drive is larger than 120 GB? The HARD disk controller supports the 28-bit LBA and large drives as 120 GB will not be recognized by the BIOS.

  What you mean with Enhanced IDE? The BIOS recognizes the new HARD drive with model number?

• Tecra 9100: Unique need driver sound yacxg.sys

  Hi, I had this problem with the sound card on my Tecra 9100. If there is anyone who could send me please the only driver version yacxg.sys: 6.13.10.2152

  Please, I really apreciate your time all your help. Now, I tried to download from the toshiba Web site but I get the error at the end telling me that the driver is not installed. I just need this file to see if it works, that I hope.

  Please let me know if someone can help me with this file. Thank you

  What about this:

  http://www.Yamaha.co.jp/English/product/LSI/us/support/downloads.html

• Tecra A11-19th - touchpad driver for Win 10

  Anyone know it if there is a driver for this model of Toshiba touchpad and when can we find? If there is not, is there a chance that it will be provided?

  A11 is not supported in Win10.
  Windows Update can find a compatible driver.

• Tecra 9100: Yamaha audio driver problem

  H

  I've just formatted my hard drive and installed Windows XP Pro.

  I ve installed all the latest drivers but I m in trouble with one. audio driver for the yamaha ac device.
  I get the yellow mark next to him.
  So I tried to uninstall, but when I reinstall I cannot start code 10.
  It s the latest driver so I put t know what s causing the problem.

  Can anyone shed any light on the subject, thanks rob

  Hello

  The outcome is known for me.
  The audio driver is simply not compatible with Win XP SP2

  Yamaha AC - XG driver used the PortCls function to check the version of the operating system. XP Service Pack 1, PortCls function is changed, while the Yamaha rider cannot get operatingsystem version correctly. This problem also happens to Windows XP SP2.

  Yamaha already provides the fixed driver. The fixed driver version is the following;
  yacxg.sys 6.13.10.2152 with software synthesizer
  yacxgc.sys 6.13.10.3152 free software synthesizer

  Welcome them

• Tecra S5 - 10: ACPI driver for Windows XP

  I had to downgrade a tecra S5 of company from Vista to XP pro for obvious reasons when you use a computer for professional use.

  I successfully patched the OS with the utility chipset but windows keep saying that my computer is not ACPI!

  Is there a driver or a specific patch?

  Good news! Thanks for the comments. Usually if you use all the stuff that follows the order of instructions of facilities do not have any problem.

• required video driver for the windows vista Director

  Re: video drivers that are required for the Director of windows vista please can someone tell me where I can download the file (s) to do so.

  Ian

  Hello

  That's where you get your video graphics drivers

  go to your computer or graphics card manufacturer site and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

• Tecra 9000 running W2k - driver for the Audio controller problem!

  Help, please!

  I have a laptop Toshiba Tecra 9000 and recently discovered that the sound was no longer working. I'm not sure exactly when he first stopped working, but believe it was with MS Windows 2000 Updates or when cleaning PC after spyware attacks. While they inspected the real device (Yamaha AC - XG Audio Device), it has each if useful ""! "with a ' Code 10 - device cannot start", in the "Device status" screen
  I removed the device and allowed windows to detect & install, without success, then downloaded and tried many devices and generic drivers, drivers and
  even later as suggested on a Web of Toshiba site, I find
  http://EU.computers.Toshiba-Europe.com namely;

  Driver date: 22/05/2001 Version: 5.12.1.2138

  I'm at a complete loss as to why it has stopped working and what to try next to try and solve the problem. Any
  help or advice would be greatly appreciated.

  Concerning
  K

  Hello

  It is possible only after the installation of the MS Updates that the audio driver is blocked by a load of your system and no sound can be heard.

  If you want you can try to install this driver:
  http://drivers.Soft32.com/driver/download-Yamaha_AC_XG_Generic_Drivers_for_YMF753_743_752-24609.html

  It is useful after installing SP2. I don't know if this will help in your case, but you can try it.

  Good bye

• Tecra M5: Need BACK driver for LAN card

  Hi, since we use floppy disks to start BACK for access to the network, we need driver Intel PRO1000 PL BACK so that they work on our new M5s I could find on Toshiba or Intel sites...
  Thank you!

  As far as I know Toshiba doesn't provide drivers for DOS.
  I guess you have to google a little and maybe you can download from any website 3rd.

  PS: as far as I know the LAN card uses Intel 82573 L (Vidalia) chip.
  The info might be a useful tool for you.

• I have a WIndows 7 Ultimate operating system failure and required a drive for a clean install. I have the product key, but Microsoft offers no English option.

  I have a Windows 7 Ultimate active computer that was swarming (STRONGLY) of malware/virus/junk files/adware...

  I think I have cleaned out, but want to do a clean to be sure install, but I have no partition recovery (may be erased by a virus?) and no recovery dick.

  I went to the Microsoft website and entered my product key.  He has been recognized as Windows 7 Ultimate, but when I had to choose a language, English was not available.

  Any solution, or should I continue to use the computer and all hope is clean?

  EDIT - I installed the windows 10 (using an ISO image) on Windows 7.  I do not enter the product key when asked (the program said I could jump at this stage of the installation).  Installation went well.

  I then checked to activate Windows 10 - it activated without any difficulty.

  I will now try a clean install...

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?