Tecra 9100: Try to install updadet driver for card his Yamaha AC - XG

Hi all

I got a Tecra 9100 and like many others I had problems after installing SP2.

I tried to install the sound card with the driver downloaded from the toshiba support page:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000001b59

but I get a windows pop saying that the file yacxg.sys is missing.
Once the installation is complete and the sound card is not installed.

Is there anyone who can help me?

Thank you
Joazinho

The fact is that the driver listed in the FAQ from Toshiba is for SP1 and NOT for SP2

I think you should google a bit and should look for if you find an audio driver that is compatible with the Service Pack 2 update

Yamaha already provides the fixed driver.

yacxg.sys 6.13.10.2152 with software synthesizer

yacxgc.sys 6.13.10.3152 free software synthesizer

Tags: Toshiba

Similar Questions

  • Try to install the driver for my Motorola Droid

    How, I discovered if I use 32-bit or 64-bit so that I could install the driver for my Motorola Droid?

    Monday, October 4, 2010 20:52:20 + 0000, Samcay wrote:

    How, I discovered if I use 32-bit or 64-bit so that I could install the driver for my Motorola Droid?

    Hold down the Windows key, then press Pause. Break. The screen, you get
    by the practice will tell you.

    Ken Blake (MS-MVP)

  • CASE policy Error Message When you try to install the driver for Kodak esp 5250

    I get the error message "Manager policy of Microsoft .net framework case has stopped working" when you try to start the installation of the 5 Series Driver Pack. Tried all the Basic .net troubleshooting I found on the net. Get the option debug or close the program. After clicking Close the program, I get the error message "installation printer Kodak has stopped working". Any ideas? Advice? More info needed? Vista SP 2.

    Hi MC_JP,

    Users faced with a similar question solved this problem by installing Microsoft .NET Framework 3.5 Service Pack 1.

    Step 1: I you suggest to download and install Microsoft .NET Framework 3.5 Service Pack 1 from the following link and then try the printer driver

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en

    Step 2: Put the computer in a clean boot and installation of the printer driver

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Important: n ' forget not the computer to start normal follow step 7 in the link.

    Kodak printer drivers

    http://www.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?PQ-path=15506&product=EKN036744

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I have a solid year Usb webcam (syc8368) and when I try and install the driver for windows 7 it never works. Help, please!

    I don't really know how old the webcam is, as this is where I downloaded the driver as the official Web site happy new year seem to take does not support the webcam more: http://www.laptop-gate.com/en/driver-usb-web-cam-solid-year-syc8368/

    The driver .inf file indicates "this file contains information for installation of digital cameras NW800 for Windows 98/2000/ME."
    Extract the files using a utility like 7zip to a temporary folder. Right click on Setup.exe in the folder and choose Properties. Click on the Compatibility tab, and in the drop-down list, choose either "Windows98 / ME ' or 'Windows 2000 '. Click on apply, OK and then double-click on it to run it.
    It may or may not always work; It is a material that is quite old, built originally for Windows 95. Compatibility mode is your best bet, in my opinion.

    SC Tom

  • When you try to install the driver for printer Epson homepage says Windows could not finish as installer works not properly. Can I get a windows fix or diagnosis and remote assistance?

    Because it's part of windows, why it does not help with the problem? Lived the installation with the Epson phone while technical assistance process what to do and they say it's faulty Windows.

    Hi paul,.

    What is the exact error message?

    Check this box if this may help: http://support.microsoft.com/kb/315346

    http://social.msdn.Microsoft.com/forums/en/windowsgeneraldevelopmentissues/thread/f8d02788-04dd-42dB-8E74-55f980aa566e

  • Tecra M9 - need to Win 7 driver for PCI communication controller

    Hello world

    I've been clean installation Win 7 32 bit on a Toshiba Tecra M9 and thereafter, all drivers.

    Now in the Device Manager it is still an unidentified device called "Communications controller PCI (single)", with several starting hardware ID by "PCI VEN_8086 & DEV_2A04 &.

    I can't identify what device it is, I searched for hours and a lot of people seem to have this problem. Everything works, except that a Campbell Scientific device (USB adapter to an owner interface) does not work and I fear that this could be the cause.

    Can someone help me?

    Best regards
    trash

    If you want to identify the unknown device please check http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

    In your case, it's Intel PCI communication controller-Intel Management Engine Interface.
    Have you installed a driver for card slot?
    Try please install the driver of chip card reader and post comments.

    You will find that all the drivers on Toshiba download page?

  • L750D-14R satellite - cannot install the driver for the TouchPad Win7

    Hello

    I have a problem with drivers for the touchpad. I downloaded v 15.2.11.1 Synaptics and me couldn't install them.
    "Installation of Synaptics (sync TP) ranked" I've got Windows 7 x 64. I've looked everywhere but I can't find any information on this problem.

    If someone knows what can go wrong and how can I fix this problem I would appriciate it.

    Never had any problems with installing the touchpad driver.
    I guess its not the touchpad driver problem but the problem with your system.

    First, you must uninstall the old driver for the touchpad.
    This can be done in the control panel-> programs & features

    Clean the system using some freeware like for instance CCLeaner tools.
    Restart the laptop between procedures.

    Then download driver Synaptics driver Toshiba UE page.
    Alternatively, you can try to install the driver for the Synaptics driver page: http://www.synaptics.com/resources/drivers
    In my case it worked and this driver has added some additional options that I would change in the Synaptics touchpad settings

  • Satellite A100-599 - cannot install the driver for nVidia GeForce Go 7600 graphics card

    Greetings to all!

    Try to install the driver for Nvidia GeForce Go 7600 after reinstallation of the entire system, but without success. Only safe mode is available after this pilot plant, tried with Windows XP, Vista and Windows 7 and with different drivers from Nvidia and Toshiba sites - same result always :(

    Would be happy to be aware of how this problem... Thank you very much.
    Satellite A100-599
    Current OS: Windpws Vista Home premium sp1.

    Post edited by: Airtoground

    Hey,.

    > but without success.
    Does that mean exactly? You get an error during installation or what exactly is going on?

    > Only safe mode is available after the installation of this driver
    Why only safe mode is available? What happens if you start Windows in normal mode?

    And before you start a lengthy discussion: what laptop do you have?

    You may notice no problem if you install Windows recovery disk Toshiba?

  • Problems when installing a driver for my scanner

    Hello!

    I have serious problems when you try to install a driver for my scanner - Epson Perfection V700 - on my desk. It was installed earlier, but after a reinstall of XP Pro (SP3), it seems impossible to install it again. Whenever I get an errormessage: "not able to copy the files. Make sure that the target disk is not dead. »

    I tried to install the driver when I had turned off almost all the programs, in "auto-start" - same problem. I run a scan of the disc and also done a defrag - same problem. I have installed many programs on my desktop, so until after I encountered the problem with the driver for the scanner and it was no problem to install the driver on my laptop (also XP Pro).

    I ' v chatted with the support of Epson in England and they have suggested that the problem was in my PC. Because I'm taking care of family archives, I am more eager to get the scanner working again. Any advice/suggestions how to deal with the situation are so much appreciated.

    Hello

    Good to know that your problem is resolved and thanks for letting know us.

    ·        If the scanner works fine then, why do you want to update the driver?

    You may need to consult the manufacturer of the scanner (Epson) to check if they have released an update of the driver for your scanner. To update the drivers on which are present on the system, follow the steps mentioned in the article below.

    How to manage devices in Windows XP

    http://support.Microsoft.com/kb/283658

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Re: Tecra A10 (PTSB0A-020001) - need webcam driver for Win 7 x 64

    I can't locate these were? I tried vista x 64 does not, any help would be great

    Tecra A10 PTSB0A-020001 webcam driver for win 7 x 64 build 7600

    I m wondering really Vista driver won t work properly.
    Try please install THIS driver support European page.
    I hope that it will work.

  • Re: Satellite P300D-20U - I can not install display driver for Win XP

    Hi all!

    I bought the laptop P300D-20U, I installed windows XP on it.
    But now I can not install the driver to display on it.

    I downloaded from this site (it's the only display driver for this laptop).
    When I install and restart, Catalyst Control Center to write me that it do not display driver support and don't launch.
    Windows loads in resolution 640 x 480 and 4-bit color.

    When I'm changing resolution or color apears black screen and nothing happens, in 20 sec it cancels.
    I tried different drivers from ati.com but nothing works :(

    SRY for my English but I hope that you will help me guys, ty

    Hello

    Satellite P300D-20U belongs to the PSPDCE series and I think that it was equipped with the chip graphics ATI Mobility Radeon HD 3470 (M82XT).

    Did you choose this series in the form of European driver of Toshiba?

    I see the Display Driver for Win XP v 8.477.

    If you can not install using the setup.exe, then you should try to install this driver in Device Manager.
    Mark (possibly marked with yellow exclamation) graphics card then choose put up-to-date driver, use the Advanced installation procedure, point to the driver files downloaded from the Toshiba page and apply.

    It should work

  • I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10?

    I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10?

    I was struggling with this ACER for more than a year. I have do it I have back when it was still under warranty, 14 months ago. Now I've updated free online through Microsoft for Windows 10 back in early August. I had hoped that my mess was a stack of the operating system, but unfortunately, it's still a piece. However, there is no virus. I run Malwarebytes Pro full time with it has quarantined of PUPPIES as well as McAfee Anti Virus full time. I use cCleaner to keep cut up. I NEVER garguillo or browsed porn.
    I've got max 16 GB of RAM. I have very few applications other than Office 2013.

    Even if this thing was a room at the time where it was running Windows 8 and 8.1, so I want to try to make it work on Windows 10 without having to start over with a clean install. That's why I asked about the drivers.

    your ZC-102 will not have a direct drivers updated from Acer support, which means you have to rely on Windows Update by itself the drivers or get them by yourself.

    Let me give you 3 Tips:

    1) never use Registry cleaners Windows 8.x and above all, they are no longer needed

    (2) uninstall McAfee, he kills the performance of your machine, use the antivirus windows integrated, it is good and very light

    (3) If you require loading time fast on programs, think about an SSD upgrade

  • Unable to install the driver for the network printer, the reason according to HP's Service: MSIServer

    Original title: Error code: OX8004FF01

    While trying to download microsoft security essentials on a computer running Windows XP Professional with service pak 3

    I received a cannot install security essentials (OX8004FF01 error code)

    I removed all Norton parts from this computer and the firewall is turned on.

    So, what is this code and how to fix the problem?

    I am not able to install the driver for my network printer, is the reason according to HP

    Service: MSIServer

    Microsoft manufacturing

    Version: 0.0.0.0.

    The name of the HP printer file is: 100_228_PS_A10_02_Full_Net_enu_NB.exe

    Any help with these problems would be appricated: * address email is removed from the privacy *

    Hello

    What is the model number of the printer?

    Help with Microsoft Security Essentials issues, contact the Microsoft Security Essentials team. You can use this link to contact them.

    http://answers.Microsoft.com/en-us/protect

    For the printer problem, check these links and see if they help.

    Method 1: Refer to this link.

    Error "Windows Installer service could not be accessed" occurs when you try to add or remove a program in Windows XP or Windows Server 2003.

    http://support.Microsoft.com/kb/315346

    Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:http://support.microsoft.com/kb/322756

    Method 2: Install fixit from the following link and try to install the drivers.

    How to fix MSI software update registration corruption issues

    http://support.Microsoft.com/kb/971187

    Also visit these links:

    How to manage devices in Windows XP: http://support.Microsoft.com/kb/283658

    How to install a printer driver locally for a remote printer in Windows XP: http://support.Microsoft.com/kb/282842

    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  • Cannot install the driver for DV6-6c11nr wireless network

    OK, I've been on this thing for the last hours 8 tries to install the driver for wireless network.  I downloaded all the drivers from the HP website and whenever I try to install the downloaded file, it opens, then closes without installing.  I can't say I'm surprised because I've always had problems with the HP drivers, but this one is by far the worst.  Bluetooth driver also did the same thing and miss me the bus sm with usb driver that is not listed on the site.  I went to the website of ralink unsuccessfully.  I have a new install of windows 7 ultimate with all windows updates installed.  Any help would be greatly appreciated.

    Hello

    Download and install:

    • Realtek Wlan driver here
    • Here validity fingerrint sensor driver

    If you will ask you to restart the system after you install a driver, please do it before you install the other.

  • Tried to install the driver for the Cam, and he said that he could not? Installed something, but I don't see it installed?

    Tonight I tried to install a driver for the Cam ti and he could not. Instead, he made somewhere, but I can't. And it does not appear as a program installed or peripheral? The driver I have is a Driver USB PC Camera. REV:168 H. For Windows 98.

    Hello

    1. you receive an error message on the computer?
    2. What is the brand and model of the Webcam then?

    Perform a clean boot and then try to update the driver compatible with vista on the manufacturer's Web site.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.
    Check out the link to update the drivers.
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

Maybe you are looking for