Tecra A10 - 11 M: Toshiba programs cannot be installed after BIOS update

Similar Questions

• Satellite Pro A300-1DZ cannot find HDD after BIOS update

  Hello world

  I recently bought a Satellite Pro A300-1DZ flea market.
  Put a new copy of Windows xp family.
  I then install all the drivers necessary own site of Toshiba and the end of it, I thought that it is perhaps a good idea to update the bios?

  OH DEAR what a big mistake.

  Now the netbook won't start windows.
  So I thought it's ok, I'll just start from the begginning and reinstall windows again, but he tells me that it cannot find a hard drive on my netbook?

  aaaaaaaaaaaaaaahhhhhhhhhhhhhhh, I'm going crazy,
  Could someone tell me please how to fix this? Thanks x

  Hello

  I think the value of the option SATA AHCI and hence Windows XP mode cannot find the HARD drive.
  It's because of the SATA controller.
  You can set the SATA AHCI compatible mode mode mode and this will allow you to install Win XP on the laptop without the use of SATA drivers.

  So, you have two options if you want to install Win XP:

  -> AHCI mode, but you must include the SATA drivers
  Compatible mode-> Win XP installation possible without SATA drivers

• Tecra 8100 problem after BIOS update

  Greetings
  I have a tecra 8100, 700 mhz with 256RAM,.
  and it works a treat, until I decided to update the BIOS, the date of the previous version was 1999!

  As I run an OS linux on this unit, I downloaded a version of the Bios boot image and loaded on startup, it reported the success of the update.

  My problem now is that the system starts fine but extremely short slow,.
  It takes 15 minutes to start and is virtually unusable.

  I ran several tests of comparative analysis and tests of memory of Hiram boot CD and the only problem in the report was my 700 CPU running at 114.82. And of couse running, the CPU runs at 100%.

  I deleted the cmos data and be restarted using the default BIOS settings.
  Long searched the net and cannot find an answer.

  Help, please.
  was soon Munka

  Post edited by: munka

  Hello

  I visited the European driver of Toshiba page and found the latest version of BIOS that is 2, 50 - WIN.
  Do you use it?

  The BIOS can be updated only run under windows! That's why I m surprised that you were able to update the BIOS, the Linux operating system running on this computer.

  Try to download the most recent BIOS version and update as described on the help page of the BIOS update.

  concerning

• iCloud cannot sync contacts after 10 updated windows kb3176495 - how to fix?

  iCloud cannot sync after 10 updated windows kb3176495 - how to fix?

  Stop synchronization. Wait a few minutes, then recheck the timing.

  Have you tried the signature to iCloud and then reconnect?

• No access to the Tecra A5 Bios after Bios Update

  After updating the bios of my tecra A5 to v.2.0 is not possible to access the bios more. Any key I press (F2, F4, F8, DEL, ESC etc.) after 2 seconds, the system will boot from the hard drive. It is a bit freightening although Windows seems to work very well.
  Any ideas what could have happened here?

  Thanks in advance!

  G_Domi

  Hello

  F2 should work at the entrance of the BIOS on the Tecra M5.
  You must press the F2 key immediately after the unit from.

• Drive external drive is no longer recognized - cannot "re" format after recent updates

  After the updates that my external hard drive does not appear on "my computer", I can't access it. When I go to "devices and printers" it finally shows as "existing".

  He directs me "format." but I just can't.  I tried Device Manager - uninstall, close; Restart the process... but same problem.

  I went to the "format". A pop up box says that I need to check to see if properly connected (Yes); and if read only files (answer should be "no"; but I have no idea how to find this information).  All about the 'Properties' check is completely different after all the recent, new self-installing.  Then. I am at a total loss... and have lost 2 days of work time trying to access my files.  Help!

  2nd question... in desparation on how annoyinlgy my new Dell became slow trying to use a scanning program... Ultra high speed PC... I realized I didn't have to use, or purchase... now I can't get rid of the icon that has permanately attached to my computer and continues to annoy me with pop-up sales pitches.  How can I get rid of him! ?? /

  Hello

  ·         What is the exact error message when you try to access the hard disk?

  ·         You use the USB port or firewire?

  ·         Who is the manufacture of your hard drive?

  Method 01:

  I suggest you follow the link below and check out them.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 02:

  Test the hard drive on another computer

• Windows Vista Home Premium SP1 - multiple windows program or service failures after Windows Update June 17, 2011

  I have Windows Vista Home Premium SP1 (I think that SP1 anyway). Last night June 17, 2011, update of Windows installed an update or updates. Now, Windows Explorer, Internet Explorer, Windows Installer, Windows Sidebar, Panel, Windows Update and other Microsoft programs all fail. I get messages with various error codes. A message is 'class not registered '. I tried a restore to a previous restore point, but apparently the only restore point is the one made after the update. What can I do here? I know that I can always restore the factory image (Dell), but I'd rather not if I can help it.

  Hi doc,

  Method 1:

  You can try to repair aStartup if it is included in the system recovery options provided by the manufacturer of the computer or start from the disc for Installation of Windows Vista.

  Startup Repair: frequently asked questions

  What are the system recovery options in Windows Vista?

  Method 2:

  Alternatively, you can try to start a disk check and check.

  You can view the following link to perform a disk check:

  Check your hard drive for errors

  Note: When you run the disk check, there are chances of losing data if you can take a backup of important data before you run checkdisk.

  Hope this information is useful.

• Cannot boot after BIOS update

  Hi, I recently bought a laptop Inspiron 5000 series, and because the touchpad control was just horrible I did a check for updates and upgrades. The update includes an update of the BIOS I plugged the laptop and ran the update. When it restarts, it failed. All I see is a boot failure:

  The family Realtek PCIe controller error. Media Test failure UNDI. No found boot device.

  I couldn't do a safe boot, but when I tried to get around the boot legacy and UEFI boot it will start.

  I am quite unhappy that a BIOS update (version 1.1.9 was the old version and 1.2.2 was new) caused this. The laptop is only 4 weeks old if I want to get this resolved.

  What should I do?

  You need not Mech system program.  This is what DellCares told me to do it on Twitter:

  Turn on the machine, key to tap F2 on startup Dell logo, it takes you to the BIOS screen. Go to the "Startup" tab, select "start list Options", change the option to "Legacy" to "UEFI".  Restart the machine, it should load correctly in Windows.

  -----

  I must point out that many others on twitter had already told me to try the same thing.  A person has explained why this has happened.  He said upgrading the BIOS changed the start to the legacy option when we UEFI.  Enter the BIOS and change this back solved the problem, so he's probably right.

• Adobe programs cannot be opened after installation due to a problem

  Hello, I just received my copy of Adobe Creative Suite 5.5. The installation procedure seems to be ok. However, when I try to open all Adobe programs I have error message saying:

  Adobe Indesign, or photoshop... CS5.5 cannot be opened because of a problem.

  Check with the developer to make sure it works with this version of Mac OS X.

  My version of MAC OS X is 10.7.2

  You can try running the software from a different user account. CS5.5 should work fine with 10.7.2

• Windows cannot be installed after replacement Toshiba HDD

  I installed Windows 7 (and Windows XP) on my laptop A42F, another manufacturer, using a DVD without problem and was used for about 18 months.

  Last week TOSHIBA MQ01ABD050 hard drive has failed and it turns out the disc has been damaged.

  I managed to save most of my data and the hard drive has been replaced by a NEW and similar (TOSHIBA MQ01ABD050) hard disk.

  Using the same DVD as the previous time I can't install windows more. I also tried other CD and DVD that worked before on other PCs and this laptop.

  I tried to install with or without created partitions.

  When booting from a CD / DVD to install Windows, it starts to load files quickly. About 80 percent, it slows down a lot and finally a page with a message (the note below is not the EXACT text):
  Windows has encountered a problem during communication with a device
  .........
  ... contact the hardware manufacturer
  Status: 0xc00000e9
  Information: unexpected IO error

  It is possible to boot from the CD and run MiniXp (or linux) and write about your new TOSHIBA MQ01ABD050 hard drive.

  My questions:
  (a) any suggestion plausible why I can't install?
  (b) has anyone seen this before?
  (c) what can I do to solve the problem?

  Any help will be appreciated

  Hi Jack

  I think it's a bad place to ask for help, even if you have replaced the HARD precedent with the Toshiba HDD drive.
  For me, it is not a HARD drive problem.

  In my view if s notebook BIOS recognizes the HARD drive correctly, then you should be able to install the system on this new HARD drive. But according to your material, some additional drivers (perhaps the drivers SATA) would be necessary, but it should be clarified with the support of laptop manufacturer.

  I think you should get in touch with the manufacturer for laptop support in order to get more details on possible solutions

• Cannot find the list of the programs already installed after windows update

  I got discount windows to reset the settings of my

  However, before that I do, a pop up mentioned that my installed programs will be removed and their list will be saved on my desktop

  After you refresh was finished, my office was empty... any ideas?

  Hey I solved it thank you

  I just have to "show desktop icons".
  stupid problem

• After Bios Update satellite A10 had totally frozen and the display is blocked

  Hello

  Today, I tried to update my Bios of satellite A10 to 5.20.
  I downloaded the unziped file and executed, as recommended in the instructions.
  After restarting the system, the laptop completely froze and the display is blocked. So, I am unable to do anything...
  How can I solve this problem?
  Thank you very much in advance.

  Wait a moment you sure you used the right BIOS?
  As you say, your laptop is that a Satellite A10 is good?

  I visited the Toshiba driver page and play the version of the BIOS and. It s 1.30!

  Sorry to say but it seems that you used the wrong BIOS!
  You should know that the update of the BIOS is always risky. The bad BIOS or bad update may damage the jury!

  I put t know how to help you try to use the good BIOS. Maybe you are a lucky man and it will work. If not, contact the technician

• Cannot send pictures after iOS updated 10.0.2

  Given that I have updated to iOS 10.0.2, I can't send photos by text message. My MMS and iMessage are both turned on. Can someone please give me a solution for this?

  Thank you

  Lynnski70 wrote:

  Given that I have updated to iOS 10.0.2, I can't send photos by text message. My MMS and iMessage are both turned on. Can someone please give me a solution for this?

  Thank you

  If you cannot send or receive messages on your iPhone, iPad or iPod touch - Apple Support

  If the link doesn't help you contact your telephone operator, MMS is a function of carrier.

• Cannot re - install after broadcast HD, error 2203 on all services

  My problem seems to be very specific and any help on the internet seems to work

  • That's happened?

  I run my system on a SSD and install my programs on a HARD drive to keep the SSD free games. My HARD drive corrupted and had to be reinstalled. Thanks to the fact that Windows is safe in the SSD, it wasn't a problem, all I had to do was re - install the programs on the HARD drive.

  • Can't install or uninstall the previous installation

  iTunes (and apple support pack, install, bounjur, ipod etc.. services that accompany it) were not even install (option = repair) or uninstall. Always returns an error. So, I went to remove them manually:

  + Clean Windows registry from any input on iTunes and Apple

  + Deleted all files and folders

  + run Windows Install Clean Up to make sure they were all gone

  This is often all help the stopovers of the internet, so-called, I would be able to install now that the old installation is over, but...

  • Installation see more older version, even not the box install Apple update, still no luck

  Error 2203 like 4 or 5 times and ends with ' installation is impossible, no changes. " I guess the 4 or 5 times for each service, it attempts to install (Hello, updates, etc...).

  I run the installer correct version and even the old version, I got the backup (which is not this old 12.5.1.21). But it will ALWAYS FAIL WITH ERROR 2203.

  Points of view?

  10 64-bit Windows

  See the note 1 troubleshooting issues with iTunes for Windows updates. Try the Microsoft cleanup tool. Look at the rest of the tip as needed.

  TT2

• 32TL933 - in places of Toshiba Youtube app not working after firmware update

  I started having a problem since the latest firmware update on my 32TL933.

  Everything worked fine until the latest firmware update.
  Since then, when I connect to Toshiba Places, everything works well except Youtube.
  When I try to access Youtube, it shows the Youtube Logo and stuck on it...

  I would appreciate if someone tell me how can I solve this problem. YouTube are the only thing that I used in places of Toshiba, and now, I can't, it's frustrating cause I have this TV since August!

  Have you tried remove the Youtube app, and then add it again?
  Try this!