Tecra A10 - BSOD with Port Replicator Port and external monitor

Similar Questions

• Toshiba Tecra A3 - problem with Port Replikator III

  Hello

  I have a problem with a Toshiba Tecra A3 combined with a Port Replikator III. Both work very well together until you disconnect the laptop computer. After you start the Toshiba Tecra A3 without the Docking Station, everything is always ok. But when I anchor again and start it, Win XP is not able to display the logon session on the external monitor screen. All configurations, I did (for example only display on external monitor) with the mobile extension module are only available after login. But when I don't see the logon screen, I can't do that; (o). so, does anyone have a solution how can I use the external screen after the boot (without using the FN + F5) key.

  any help is much appreciated
  Thank you
  Mario

  Hello

  As far as I know logon window can be displayed on the primary monitor only. Computers laptop LCD is set to a primary, and it cannot be changed. As you can see this option is grayed out in display properties.

  Good bye

• Tecra A2: Question about DVI and external monitor

  Hello
  I am trying to get a DVI Signal of the Tecra A2 using the Advanced Port Replicator III but without success. The A2 does support DVI anyway?
  Another question: is it possible to set up the main display to the external monitor using "extended Desktop"?

  Thank you
  Ralph Menon

  Hello Ralph

  Your unit doesn t support DVI port and you can't use it. As far as I know just the ports that you can find on the device, you can use in Port Replicator because the signal is just loop through.

  The problem with the screen is that mobile has the main value and it cannot be changed (on my Tecra M1 nor). The windows will be implemented on an external but password box will always be displayed on the screen of the laptop.

  Good bye

• HP Elitebook 8560w: screen using my 8560w with the lid closed and external

  Hello

  I connected my 8560w to an external monitor via an advanced docking station.  My monitor allows me to switch between two sources.

  I intend my set-up for my future office and virtually all that my activity will be on the 8560w and the monitor.

  Can I run the 8560w for a long time with its lid closed without risk?  I was in Control Panel/power/choice what closing the lid does and all sleep on battery and nothing power are.

  Is there a heat problem? Or other side effects?

  Thanks, Russ

  It should not be unwanted problems to run for a while with the lid closed.

• Problem with T400 and external monitor (1920 x 1200 resolution)

  Hello

  My laptop:

  ThinkPad T400 2767-C99 * (graphics: ATI Mobility Radeon HD 3470 256 MB / X4500MHD (Switchable Graphics)), OS is Windows XP

  I just installed the latest video driver from lenovo page (which also installs "ATI catalyst")

  Externale monitor:

  I just bought a Samsung SyncMaster 2443FW, 24 "TFT monitor with a maximum resolution of 1920 x 1200

  Problem:

  Monitor works fine with my new T400s and my old Acer laptop. However, with my T400 (described above), I can't do the monitor uses the 1920 x 1200 resolution. However, all the other ugly resolutions so I need it to work with 1920 x 120

  -If I change the resolution of right on the desktop of Windows XP (and then properties-online settings) and set the screen on 1920 x 1200 resolution, then my monitor used only a lower meanless (1440 x 900) and effect of scrolling as I move my pointer on the screen

  -If I use the ATI catalyst software to set the resolution, I can only chose smaller resolutions (he not go 1920 x 1200)

  Questions

  Is it a hardware (maybe the graphics card does not support 1920 x 1200) or a software problem (maybe a problem with the driver) or just a matter of adjustment?

  What can I do?

  Help would be much appreciated!

  * Original description: 2767-2JG base: T9550(2.66GHz), 4 GB of RAM, HD 250 GB at 5400 RPM, 14.1 LCD in 1440 x 900, 256 MB ATI Radeon 3470HD, CD-RW/DVD-RW, Intel 802.11agn wireless, Bluetooth, Modem, 1 GB ether, UltraNav, chip dry, RPF, camera, 9 c Li - ion, BACK license

  Problem solved:

  I was using my old monitor vga cable that doesn't use 14 pins (worked fine with my T400s and Acer laptop - but not with the T400).

  => When I switched to cable 15-pin that came with the monitor, the problem was gone!

• With both internal customers and external view of the Horizon, I do * have * to have at least a connection to the server by type of connection?

  If I want both external and non - VPN and LAN users internal to access desktops from view, I need to have a connection to the server dedicated to external users and another for internal? Right now I have one pair of Security Server-connection to the server and external connections work fine, but the internal connections are not. I have to get up at least a connection replication server and change the URL HTTPS Secure Tunnel for internal users only?

  Apparently, you don't need a connection to the server dedicated to internal users if you also external users and a security server. I found this during my troubleshooting. The URL of security server will be configured as administrator mode that external URL can be resolved and accessible while the URL to connect to the server will be configured with a URL can be resolved internally and is accessible in administrator mode.

• Problems with my slower... graphic AGA and external monitor does not display

  First of all, let me say that I am not computer savy.  I just bought an Alienware 17 June 1.  Got my AGA and installed a Geoforce GTX 980 inside graphics card.  First I tried as far as I know (which is not yet much about computers) to connect an external monitor to the AGM.  For some reason that the monitor does not display anything and my laptop States there is not all the other monitors it can detect.  Now, the other problem I have is that I run games using my AGA and when its connected I can really see my games download restless and slower.  I thought that the whole purpose of the AGM was pushed my graphics and do amazing things... not very frustrating.  Any suggestions on what I might hurt?

  Try the following:

  Disconnect the graph.

  Uninstall the video card drivers.

  Install the following driver (this version is not in the official Dell support website again, however, it has been tested by our engineers)

  Restart the system and connect the graphic amplifier and test it.

  Please let me know if this helps you solve the problem.

• MacBook 12 "and external monitors - experiences

  That I have not found much info on using a MacBook 12 "with external monitors (but have found problems), I thought I would post my experiences here for the benefit of other researchers:

  MacBook 12 "with Dell u3415w (3440 x 1440) via a USB - C adapter Digital AV Multiport (HDMI):

  VIDEO: Experienced random black screens on the external monitor. After update to El Capitan 10.11.4 version which included an update of the firmware of the adapter, the problem become constant, with the external screen crashing to black seconds nonstop. Switching the HDMI on the MHL port on the monitor completely solved this problem.

  VIDEO: I'm only able to get a resolution of 2560 x 1080 scaling to fill the screen, which is a little fuzzy but fine for office tasks - selection reduced 3440 x 1440 or "best resolution for this monitor" translates into a look, windowed 16:9, with black bars on the right and left. I have not yet found solution to reach ultra-wide 21:9 angle at the native resolution (but would appreciate a).

  VIDEO: Macbook 12 discs easily display 3440 x 1440 for tasks of office such as word processing and surfing. Video full HD YouTube is generally good, but gets now and then a little agitated.

  AUDIO: Holding Option and clicking on the speaker icon in the menu bar show selectable option for the audio output to the device (monitor). On this screen, it seems to be a problem of reception of the signal of the Macbook when another device is connected to another port. In my case, a PC connected to the DisplayPort would be "laundered" the audio signal of Mac but ONLY if the PC has been out audio through external speakers, not the monitor (a lot of trial and error to discover this. When the audio PC sent ONLY to the screen, the monitor then accept the audio signal of the Mac, too. But have an external speaker connected via a cable audio 3.5 mm to the pc mobo (taken minijack) would somehow replace the TWO PC and Mac audio signal to the monitor. Something to do through the DP connection maybe)

  with ASUS PB27Q (2560 x 1440) via an adapter, no problem.

  with ASUS PA328Q more ASUS PB287Q (3840 x 2160 or '4 K') using the same adapter. Cursor extremely lag/Office up to that you enable DP (Displayport) 1.2 through settings on the screen of the monitors. This allows the Macbook to drive a monitor 4K at 30 Hz, which is always a little laggy, but realistic enough to be productive for word processing, surfing, etc. Would not recommend a 4K monitor for Macbook 12 for a really "nice" experience until / unless that 60 Hz is an option.

  Hope someone finds this is useful.

  Mac Book 12 with external monitor Acer H277 Hu with Usb c

  random black screens

• Portege M800 and external monitor Dynadock question

  I have a M800 connected to a U Dynadock docking station.
  I have problems when I try and put my external monitor as the primary device and have the cell phone as the extension to monitor.

  I am running Windows XP.

  Are the only options it will allow: Clone, Extended (laptop is main and external is the extended option)

  If I use the WIndows graphic option it does not put the external monitor as the main display (I check this option and click on apply and it remains unchecked)

  If someone could help that would be great.
  Otherwise, I would recommend is not to use the dynadock

  Sorry mate but I still don t understand what you are talking about what problem do you have?

  Is the Dynadock video drivers give you the ability to view a total of three screens.
  -L' screen of the laptop.
  -external monitor connected to the video port on the laptop (if available)
  -ewxternal monitor connected to the Dynadock

  In addition, you can use mirror Mode and Extended Mode.

  Mirror Mode creates an identical view between your computer screen and the external monitor
  Extended mode extended Mode lets you split your display on multiple monitors.

  These are the features that you can use with Dynadock

• HP ENVY 5830 HDMI / DVI and external monitor not detected

  I have a HP Envy 15 with the ATI 5830.  I want to connect an external monitor.  The outside is a Samsung SyncMaster P2770HD and has a DVI (also has HDMI, but poor quality when used from a PC). My laptop has only HDMI.  When I use a DVI - D HDMI converter / my laptop does not detect that there is an external monitor.  I've lived all my settings and updated the Bios and video drivers.  I'm missing something. Appreciate any help.

  Hmmm... Looks as HDMI / DVI - D adapter for me, like the HDMI port problem works well insulated... I don't remember any problems, I've heard of HDMI to DVI - D and untimely on Envy 15...

• CS5.5 and external monitoring - is there something new?

  System requirements says:
  "Capture port IEEE 1394 compatible OHCI for DV and HDV,
  "export to tape, and transmit to DV device.
  http://www.Adobe.com/products/premiere/tech-specs.html

  Does "transmit to DV device" hardware output MPE average to a DV device?

  Or, this post is always the 'official' for external monitoring solution from Adobe
  without the help of third party material and sequence presets?
  http://forums.Adobe.com/thread/744683

  DV out is still not compatible with the GPU acceleration.

• Connection ethernet and external monitor

  Is it possible to connect an ethernet cable and a VGA adapter to a MAC AIR at the same time?  I use my crush on internet in my school and I would like to use an external monitor at the same time.

  There are two options: a dear TB hub that allows you to add additional ports or a USB Ethernet adapter. The USB adapter will be slower, but depending on the speed of your school's network you may not notice a difference.

• Satellite U300-113 and external monitor use

  I have, what I thought until very recently, a very simple need: I would like to connect an external monitor on my laptop, but on the continuation of the investigation things seem much more complicated about resolutions natives and elongation.
  Is there anyone who could recommend an acceptable quality monitor that is proven to work?

  I think that you should check the resolutions supported for external monitors and I think you can find answer in user manual s on page 119. To have a perfect image on external screen, you should buy external display with a native resolution listed in the table of user s manuals.

  Also talk to your local dealer. Perhaps you can test the functionality in the store before buy you.

• EliteBook 8460p and external monitor/projector does not work

  We have several 8460 with the same question.

  They work fine until you try to connect to an external monitor/TV/projector and then the trouble begins.

  When you use Fn + F4 to establish a dual monitor output the external monitor and integrated display switches between the two, as if the PC cannot determine the display to use. On rare occasions, it works but it is not reliable. I ve it first met on a fair and when I tried it before the session, it worked fine. During the session it just started this behavior. I took it out and replaced the graphics drivers, BIOS and made sure that the resolution was not the issue. It worked fine and I returned it to the room of the lesson and he did it again.

  I started to believe that the projector was the wrong part here, so I didn't want to use the PC again on this fair, but no other computer shows no signs of distress.

  Since then, it was at the beginning of this spring, I ve seen and experienced the same problem with several computers of the same type and with different monitor and they all behave in the same way.

  I have spent some time now and searched the web but found nothing I ve doesn't explain anything around it and so far no update driver, and no other updates (including a full installation) has solved this problem.

  There are the HP Elitebook 8460p with AMD graphics card in the computer.

  There is no any other indication that something isn't going to the newspaper or whatever it is.

  Any suggestion of what may be the cause of this is useful.

  Hello and thanks for the reply.

  The original problem is old, from 2012, in fact and more or less no longer applies. Some of the more troublesome computers has been replaced with other models at the time and the 8460 p is used more or less entirely users who do not have the need for external screens.

  Have not seen it since a long time but we've updated the BIOS and drivers a couple of times so the current status is in fact "stable".

  Thus, we can say that the problem is not more, but whatever solved the problem is unknown.

• Using the function tablet and external monitor at the same time

  Hello

  I was hoping with the docking station and the external monitor, I can work as with an ordinary computer and at the same time to use the computer screen Tablet laptop to take notes with Journal (extended desktop display).

  Unfortunately, when I touch the screen with the stylus, it is still planned for the external monitor - no matter what I set as main display it seems just really stupid.

  Does anyone have an idea how to prevent this?

  divB

  I've updated to the latest official drivers from the Wacom homepage (not Lenovo-, they are old!) and it seems to work!

  I hope he'll stay until now.