Tecra A10 with Intel WiFi 5100 running Vista 32 bit fails to connect WiFi

Similar Questions

• No Wireless N on Tecra M10 with Intel Wifi Link 5100agn a XP Pro

  Hello

  I can not connect mode n to my wireless n router. There's always going to G.
  The driver that I use is 12.4.0.21 4.3.2009.

  802.11n mode is enabled, everything is set by default.

  Without thread-mode is set to standard, a., b and g.
  I wonder why the n modus is not shown here. This is perhaps the reason why I can't use the n-modus?

  Thanks for any help

  Rolf

  Hello

  > Wireless mode is set to standard, a, b, and g.

  Do you want to say that these WiFi modes (A, B and G) are defined in the settings of your WLan card?
  If Yes, then this would be the reason why the M10 doesn t use the Draft N.

  If you want to use the Draft N then this standard Wlan key must be activated in the router WLan and Wlan card settings!

  Wlan card settings can be changed in:
  Device Manager-> Wlan card properties-> Advanced tab

• Equium P200 1IR running Vista 32-bit Home - no WiFi

  I have a Toshiba Equium P200 1IR running Vista 32-bit Home with a wifi problem. The wifi adapter is an Atheros AR5007EG.

  The problem I get is endangered wifi networks and laptop connects to networks I use normally.

  I tried to reinstall the connections and passwords. I know that routers are functioning as my wifi phone can connect to routers, but the laptop will not.

  I removed the battery and reset the BIOS, I removed the adapter from the list of Device Manager and reinstalled, I updated the driver and restarted the laptop.
  I can see some time the wifi router and sometimes I can't. If I can see my router named it will connect to it.

  Sometimes, he will not recognize the router but when I use the Toshiba wifi doctor and run the radar feature, you can see the router but it does not show in the network and sharing Center, although I can see on the radar option.

  Any help would be greatly appreciated.

  Hello

  You update the BIOS?
  Please do if the laptop uses the old BIOS.

  In addition, you must update driver WLan
  You said you did, but I don't know if you used the latest version of m

  Here you can download the latest Wlan drivers.
  http://APS2.toshiba-tro.de/WLAN/

• Tecra A10 with webcam

  Anyone know what model Tecra A10 comes with a webcam & software to read the cards?

  Thank you very much

  1Sona

  AFAIK all Tecras A10 with part number PTSB0E-xxxxx have webcam.

• Tecra A10 with replicator - no output to the DVI port but analog works very well

  Hi all. It's driving me crazy. Brand new Tecra A10 with a nine port replicator and a new external LCD. When I plug them all in all and connect to the screen using the blue/analog/d-sub cable, the image on the screen of the laptop automatically turns on the external screen when the A10 is docked. But when the external display is connected with the white/digital/DVI cable, the Tecra and/or the Replicator is auto-switch the output to the external screen.

  In addition, when you press Fn + F5 to switch the LCD only to LCD + CRT or CRT output only, the Tecra is so "smart" as to "realize" there is no screen, and it switches the output to only the Tecra.

  Now, we would put in place with the blue/analog/d-sub cable, but the picture is wavey and not satisfactory at all.

  Just so we're clear - when the display is plugged into another computer, there is a beautiful clear picture on/through the white/digital/DVI cable, so I don't think it's screen.

  Can anyone help with this please? Is the Replicator defective? Or am I missing something?

  Thank you very much

  As the portable Akuma (graphics card) does not have a DVI output.

  If you use the VGA cable, but image quality should not be worse as with the DVI cable.
  Choose the display resolution higher than the monitor supports and 60 Hz.

• My office uses Windows 7 and my computer is running Vista 64 bit. My home computer can work with my office from a USB files?

  original title: office / Home compatibility

  My office uses Windows 7 and my computer is running Vista 64 bit.  My home computer can work with my office from a USB files?

  The game, August 5, 2010 15:24:35 + 0000, JerryPMP wrote:

  My office uses Windows 7 and my computer is running Vista 64 bit.  My home computer can work with my office from a USB files?

  Yes. There is no problem with their two different versions of
  Windows. The files contain not what anyone who still marks that
  Windows version they were created under.

  But there is a potential problem. If the files have been created with a
  another version of Office that you have, you may have
  Difficulty reading the. For example, Word 2007 and 2010 creates .docx
  files by default (unless you tell her save as .doc) and if you
  an earlier version of Word, you will not be able to open a .docx file
  unless you install the compatibility pack to
  http://Office.Microsoft.com/en-us/Word-help/open-a-Word-2007-document-in-an-earlier-version-of-Word-HA010044473.aspx

  or http://tinyurl.com/29f5scy

  Ken Blake

• Need USB drivers for old Equium L40 - 10U PSL41E running Vista 32-bit

  Hi all

  I think that my USB driver is corrupted. I found the ChipSet, LAN and BIOS drivers for my old PSL41E Equium L40 - 10U running Vista 32 bit. However, I have not found the USB drives I need. USB drivers are contained in the ChipSet, BIOS or LAN driver?

  If not, where can I find and download the USB drivers for my old old Equium L40 - 10U PSL41E running Vista 32 bit?

  Thank you! -Le Cannet

  Here is where I found the drivers (but with no mention of USB drivers):
  [Drivers Equium L40 - 10U PSL41E | http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&selCategory=8 & selFamily = 391 & selSeries = 326 & selProduct = 752 & selSho rtMod = 541 & language = 13 & selOS = 26 & selType = all & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 8 & pa ge 1 = & startPage = 1 & prevCl = true]

  > Are contained in the ChipSet, BIOS or LAN USB drivers driver?

  USB drivers are part of the Windows operating system.
  The USB ports should work after the installation of the Windows operating system and, therefore, there is no such thing as a USB driver for the USB 2.0 standard.

  In addition, the chipset driver must be installed.

  I checked the proposed link in your ad and here, you can download the Intel chipset utility.
  The update of the BIOS is also available

• I am running vista 32 bit and I think the upgrade to windows 7

  I'm running vista 32 bit and I think the upgrade to windows 7, I don't know if I choose the upgrade option, I can keep all my files and all the software that I

  installed on my laptop but that include photos, video and music and send the parameters I use outlook 2003.

  Thank you

  Hello

  Depends on which edition of Vista you use on Windows 7 edition, you can switch to.

  And as you use 32-bit, you can only switch to Windows 7 32 bit.

  32-bit to 64-bit should be done with a clean install.

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  See you soon.

• When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Tecra A10 with wrong source IP address ping responses

  Hello!

  I have problems with my network connection.

  After installing Win7 pro answers tecra A10 ping on the lan with 192.168.0.239 port, but he 192.168.211.36 the DHCP server.
  In Wireshark on tecra A10 I don't see demand for IGMP but no answer.

  On the other PC the answer comes a false IP (and of course a wrong MAC).
  If I disconnect the lan cable a stop responses.
  If I boot in Linux, everything's fine.

  So what software changes IP address?
  I see no answer in wireshark, I think it might be something around the network card.
  Internet is OK, but I can't do any remote.

  Someone at - it an idea?

  If your problem is the remote control only, right?

  If I understand right you don t use original Toshiba recovery image so no one here Don t know exactly what have you installed and you do exactly.
  If your LAN/WLAN card working properly and you can connect to your router, this proves that there is no hardware problem.

  Have you tried the same thing with the original preinstalled recovery image?

• Tecra A10 - 1 H 1: I can boot from extrnal drive is connected to ESATA

  Hello
  I need to buy a new laptop. What I'm looking for is a laptop with an ESATA connector. And it must be possible to boot from an external drive connected to the ESATA connector.

  I found the Tecra A10 - 1 H 1. The specification seems perfectly for me. But I cannont find information, it is possible to boot from a drive connected to the ESATA connector. Does anyone know if this is possible?

  Concerning
  Norbert Ruessmann

  Hello

  A friend told Tecra A10 and he said that he of a notebook of big business, it seems, he is very satisfied with this laptop. :)

  I asked him about the startup eSATA option and he told me that it of not possible to start from eSATA, but you can boot from a USB storage device. I put t know why you want to start from eSATA, but if you want to boot from your external HARD drive you can connect via the USB port for example. It should work.

  Furthermore, system dual-boot (for example, XP and Vista) is also possible and you n t need a external HARD drive or second for that.

• Will be skydrive folders to sync between computers running vista 32 bit and 64 bit win7 systems?

  I have two laptops, running a Vista 32 bit and the other works under Windows 7 64-bit.  Can I use SkyDrive to synchronize folders and files between two computers?  I am the only user of both computers

  SkyDrive will be see no difference between the different OS and bit versions. You can upload your documents to SkyDrive from a Vista 32 bit and download them on a 64-bit of Windows 8, or even on a Mac.

  For a real-life example, I created earlier today a PowerPoint presentation using a 32-bit Office PowerPoint 2010 on a 32-bit Windows Home Premium, uploaded to SkyDrive and later at home, downloaded on my Windows 8 Pro 64-bit and continued to edit with Office PowerPoint 2013.

  Your files and documents "know not"what version of the program and the OS bits, they were created with. " Bit version is important when it comes programs and system files, not with your personal files and documents.

• BEX with Adobe Acrobat error on Vista 32-bit operating system

  I am running Vista Home Premium (32 bit) and get a Windows error message when I try to get a PDF with a password Adobe Acrobat 8.1. Reads the error message Windows: "Adobe Acrobat has stopped working.   (The problem event name is BEX).  And when I click on 'Check online for a solution and then close the probram', he just seems to close the program.  I searched for an answer online (Adobe and Microsoft), but can't seem to find something close to what I feel.  Can anyone help?

  Hello

  Have you installed the toolbar with Adobe Acrobat?

  BEX errors often are caused by toolbars such as Google, TrendMicro and others. Are you using a 3rd party
  toolbars in Internet Explorer? Cause and solution is the same for Vista and Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave remnants behind which emits causes).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore advanced settings, and then click RESET - APPLY / OK

  IE - Tools - Internet Options - Security tab - click on Reset all areas - APPLY / OK

  Close and restart IE or IE with no addons

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be a BHO - BHOremover - free - standalone program, needs no installation, download, unzip and run.
  Also not all the BHO is bad, that some managed bars of tools and features that you added.
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only. If you ever think malware update and then run it as
  a scanner.
  http://www.Malwarebytes.org/

  ======================================

  Check with the Support of Adobe Acrobat Reader and other Forums

  Adobe - Support
  http://www.Adobe.com/support/

  Adobe - communities
  http://www.Adobe.com/communities/

  Adobe - Forums
  http://forums.Adobe.com/index.jspa

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• HP c 722 deskjet printer running Vista 64-bit

  Can someone tell me if its possible to print using Vista 64-bit with a HP deskjet printer the 722c?   I went through all the troubleshooting techniques and no help.  When I try to print only the flashing and nothing comes out.  Also, is pass an option to only Vista Basic (not 64 bit) because it seems that it can work in this environment.

  Here is the solution for 64-bit Windows.

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/DeskJet-710-720-810-820-100-series-printers-patch-for-64-bit/m-p/203377#U203377

• Tecra A10 - S3501 Power blinks, fan runs full speed.

  Welcome all,

  I have a clients Tecra in the shop, and after having received a good description of what was going on at the tme of failure, I still can't understand it. She was watching a flash video when it froze. On reboot, it will not init the LCD, it seems at least partially POST, the CD spins, and all LCD screens blink as usual. Still no init LCD and the power light flashes green, without cause, is not a binary led post code. The fan runs at full speed directly and remained there for the duration. I counted 20 a second flashing with the fan at full speed, before you turn off the power. Any ideas? Customer has no guarantee, so would be good remedy for her. :-) Thank you and have a nice day.

  THERE

  Hello

  Simply said the screen is blank when snaps for laptop and you can not see anything
  You are able to access the BIOS?
  Press ESC, then press F1 to access the BIOS

  I also recommend to connect an external monitor to check if something would be visible on the second screen.
  Otherwise I think that it s a screen hardware problem or GPU