Tecra A10 with wrong source IP address ping responses

Similar Questions

• Tecra A10 with Intel WiFi 5100 running Vista 32 bit fails to connect WiFi

  Hello

  a whole new Tecra A10 with buildin Intel 5100 WiFi fails to connect to the Wlan router, using the pre-installled Vista Business 32-bit. Vista has always said: wrong password.

  Yes, Wifi hardware is enabled, of course. And Tecra WiFi OK MAC is stored in the config of the router. Also the WiFi settings were correct (wpa2-psk aes), corresponding to the Wlan router. Password WPA2 is 13 characters. Connect all the other machines with a Wlan successfully turns a working Wlan configuration and use of the correct password.

  I installed the latest driver on the Toshiba site - without success. I also installed the version of the driver from the Intel site will, too--without success. Doesn't matter what tool I used to connect, Vista itself, or the specific tool of Toshiba (Radar), choice to get an encrypted Wlan connection.

  WPA2 and WPA or WEP can be used. I can't get a Wlan connection when encryption is totally * disabled *! Currently, I use a * clear * Wlan to use this Tecra A10 in the network. Real gross and no solution for more than a few days.

  All other devices in the same network can connect the router Wlan with WPA2-PSK and WEP, no problem. Only the A10 / WiFi 5100 fails.

  Searching the Web I found really many reports all issue of WiFi with a WiFi 5100 devices, so it seems to be a generic material or / and driver issue.

  How can I correct this Wifi 5100 connect problem and use encryption WPA2-psk on Tecra A10 and WiFi 5100 with Vista? If this is not possible, I have to return this laptop and get another model with a working Wifi / Wlan Hardware.

  Thank you.
  -Thomas

  Hello Thomas

  Have you tried to connect your laptop to another router by friends or elsewhere?
  It is really strange that you can use any of the WIFI ciphers available.
  Have you tried to reboot your router?

  I have Satellite A300-1LI with the same card, WLAN, preinstalled with Toshiba recovery WXP image and I use it sometimes linked to the WLAN with WEP encryption.
  Have you tried to contact Toshiba or your local dealer for advice?

• Tecra A10 with webcam

  Anyone know what model Tecra A10 comes with a webcam & software to read the cards?

  Thank you very much

  1Sona

  AFAIK all Tecras A10 with part number PTSB0E-xxxxx have webcam.

• Tecra A10 with replicator - no output to the DVI port but analog works very well

  Hi all. It's driving me crazy. Brand new Tecra A10 with a nine port replicator and a new external LCD. When I plug them all in all and connect to the screen using the blue/analog/d-sub cable, the image on the screen of the laptop automatically turns on the external screen when the A10 is docked. But when the external display is connected with the white/digital/DVI cable, the Tecra and/or the Replicator is auto-switch the output to the external screen.

  In addition, when you press Fn + F5 to switch the LCD only to LCD + CRT or CRT output only, the Tecra is so "smart" as to "realize" there is no screen, and it switches the output to only the Tecra.

  Now, we would put in place with the blue/analog/d-sub cable, but the picture is wavey and not satisfactory at all.

  Just so we're clear - when the display is plugged into another computer, there is a beautiful clear picture on/through the white/digital/DVI cable, so I don't think it's screen.

  Can anyone help with this please? Is the Replicator defective? Or am I missing something?

  Thank you very much

  As the portable Akuma (graphics card) does not have a DVI output.

  If you use the VGA cable, but image quality should not be worse as with the DVI cable.
  Choose the display resolution higher than the monitor supports and 60 Hz.

• vSphere syslog from the wrong source IP address

  I enabled syslog on my pointing my syslog server esx servers. My syslog server has an access list on who can send so I have allowed the whole vsphere management IP address space. For some reason any 2 boxes send the syslog via the network IPs vmotion. The syslog server to sit in one of these segments.

  anyone see the problem?

  I did not the old reboot again.

  Can you please share some details on the host network configuration, i.e. addresses IP, subnet masks, default gateway. Given that the host can be that a single default gateway the vMotion network should not even able to reach the syslog server in another subnet (except that you have configured static routes).

  VMkernel (vmkX) ports are configured for the management and vMotion?

  André

• Tecra A10 - how to disable the fingerprint reader when it is docked

  Hello

  I use a Tecra A10 with a 2 Express Port Replicator.
  How can I disable the fingerprint reader when it is docked and still use it when undocked?

  Thanks for your help

  Hello

  As far as I know that something like this is not possible.
  Following this logic, it will be possible to have access to protected files when the laptop is on docking station.

  Either you use fingerprints or not.

• Downgrade/Upgrade from XP or Vista - Tecra A10

  I have Tecra A10 with pre-loaded Vista Business. I finished the installation.
  There are two things I'd like to know:

  1. If I downgrade to XP Professional using the product recovery disc that came with the laptop is there Toshiba Utilities and drivers as well or I need to download them manually?

  2. now, I don't have to activate my Vista, but in the case of the downgrade to XP, and most later upgrade possible to Vista again using Recovery DVD I made, I will have to undergo a procedure of activation?

  Thank you

  (1) the drive of Toshiba (with Win XP?) always contains the image files. An image is a package that contains Windows OS, drivers, tools and additional software. After installing the drive recovery it s not necessary to install all the drivers.

  (2) you can activate the Vista and can then create an image.
  This image contains the Vista activated. If a second activation is not required.

• Re: Request for help with Tecra A10-156 (Vista backup media)

  Dear members of the Forum

  I am the owner of a laptop Toshiba Tecra A10-156. As the owners of this model will be aware, the machine is supplied with Windows Vista pre-installed. Also supplied is a recovery of Windows XP Professional disc, which, once loaded on the machine, remove everything on the hard drive, including the operating system Vista and the Vista hard disk recovery partition.

  The documentation that comes with the laptop warns the user if he wants to take the Windows XP program on the computer, it must burn a DVD of backup software vista before you load the XP image because if it loads Windows XP without doing that then he loses everything to do with VISTA on the machine.
  Unfortunately, when I bought my machine, I did exactly this error and load Windows XP without backup Vista Software. Load the XP dvd, hard drive was completely wiped out, including not only the Windows Vista installation, but also the recovery partition.

  Although windows XP is a good operating system, I would like the ability to restore my machine to the factory setting. When I asked what to do with Toshiba, they said that the only way they could help would be to sell me a backup DVD of Vista recovery which would cost me a little money. (more than thirty books).
  They also mentioned that if I could find another owner of A10 - 156 using vista would be ready, they could burn a DVD using their recovery from vista machine and then I would be able to use this DVD to do the job.

  As I know personally of all other owners Tecra A10, I am writing to make a plea to ask if some A10-156 (it takes as the exact model) owner would please that nature to let me have a copy of VISTA backup medium please. Of course, I'd be more than willing to pay a total amount of the Virgin DVD (s) and shipping costs.
  If someone is willing or able to help should I very grateful indeed and hope to hear from a fellow A10-156 owner as soon as possible.

  Yours sincerely
  Ian in the United Kingdom

  I hope someone here can help and maybe you should put your e-mail address for direct contact.

• Tecra A10 - BSOD with Port Replicator Port and external monitor

  Hello

  I have a Tecra A10 PTSB0A 05C023 with XP SP3 on an Express Port Replicator, running to an external monitor (1280 x 1024) on VGA. Works fine for a while then seems BSOD spontaneously when not in service - possibly when screensaver or powersaver comes into play.

  BSOD is a STOP 0x0000007E in igxpmp32.sys

  I downloaded and installed the latest video drivers intel from the Web from Toshiba - 6.14.10.4953 site

  Any help or advice by eliminating the BSOD would be greatly appreciated.

  Kind regards

  Rhys.

  Hi mate,

  I asked Google to igxpmp32.sys and this file belongs to the Intel display driver. In your case, I recommend the page Intel searching for the latest display drivers.
  [www.intel.com]

  Also have a look on the Toshiba site for a BIOS update, or you have already installed the latest version of the BIOS?

  In addition, it would be interesting to know what Port Replicator you use exactly. Can you post the model number?

• Tecra A10 - 1LL - connection with the external monitor

  Hello

  I have a problem with my laptop Tecra A10.

  When I connect to an external monitor to the laptop I have to manually switch the screens because external shows nothing. When I disconnect the monitor I have to pass the screens manually with FN + F5 because the internal display shows nothing.

  My old laptop (Tecra A9 (PTS52E-0E702NGR)) is the poster automatically whenever I connected or disconnected an external monitor.

  Anyone has an idea why the A10 light automatically as the old notebook? Maybe it's the only spot in the preferences of the display driver that I don't see right now. :-)

  Hi SilverWizard,

  What happens if you try to switch on the external monitor using the options of display driver, or that this combination of buttons don t work?

  As wrote Al - eX you must update tools from Toshiba to get the keys FN working again. Everything can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  It's working now?

• TECRA A10 - 11 M - problem with TOSHIBA accessibility

  Hello to the forum.
  I have a TECRA A10 - 11 M (a Greek market system) and after I faced many problems with Windows VISTA
  I installed with Windows XP Professional, the legendary Microsoft OS recovery CD.
  Here I have faced a problem with my buttons of accessibility. My function keys do not work!
  The message is: this system cannot be used "TOSHIBA accessibility.
  I uninstalled and installed again the feature, but nothing happened.
  Y at - it a program known that affect my system and prohibits any accessibility to work properly?
  Can anyone help with this?

  Thank you in advance,
  Vassilis

  _ @ dvass66_
  The FN keys need to installation of common Modules and Hotkey utilities for display devices.
  Common modules must be installed first!
  Also I recommend the update to the BIOS too

  _@korenisko_
  > I think that problem on this laptop is Wifi Atheros card
  I put t know why you think this, but I put agree t
  I have Atheros WLan card and since I use the latest BIOS and WLan driver everything works perfectly.
  Vista turn too stable, but indeed it needs MS patches and update my Vista updates more than once a week...

• Keyboard with Tecra A10-112 problem

  I got my laptop Tecra A10 - 112 today and the first thing I noticed is that the keys 'L', 'R' and 'Y' makes very annoying loud clicking sound whenever they are turned on.

  There is no quick fix for this?

  > Toshiba has begun to moderate the Forum now and already denied my last post about the tightness of the A10 to publish screen
  Do you hear this announcement? I think you're a bit confused
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=133178#133178

  This user forum is free and you can post anything you want, but I think you should be objective.

  > The model number you have listed is not yet available in the United Kingdom as far as I know. I was a happy with Toshiba customer, until I bought A10 - 112.
  Looks like you n t know that Toshiba offers different laptops in the different countries and each can series supports of different specification.
  So maybe this A10-112 is not distributed in the United Kingdom, but in other countries. I don't know that other A10 with similar specs can be purchased in the United Kingdom.

  Sorry I m not owner of the A10, but one of my friends bought this laptop and he asked me for the configuration.
  So I know that it is a laptop really good for the market with new features

  I respect your opinion, also because everyone can have different opinions, but don t forget to be objective
  If there is a hardware problem with your keyboard, ask for replacement!

• Tecra A10 - change of resolution with Docking Station problem

  Hello

  I own a Tecra A10 - 14Q and I like it a lot - it is a very beautiful piece of hardware, including the functionality of UMTS.

  When the Tecra is moored to the dock Express, and the external monitor (Samsung SyncMaster 22 "with resolution 1600 * 1200) is on defining the Office to be cloned on both screens, passes resolution of 1280 * 800 on the Tecra to 800 * 600 as"best resolution.

  I tried Intel and Mobility Center graphics settings, but I can't find a way to set I want to keep the resolution 1280 * 800.

  Suspicion to do so automatically is welcome. I found that a program that now lies on my desk that I run so it redefines the resolution to 1280 * 800, but I would like to stress that resolution remains just that it is.

  Kind regards

  YaGru

  Hello

  It's not easy to say why the resolution automatically decreases

  But sometimes, if the external monitor would be connected to the Tecra A10 directly without using the Express Docking Station?

  Otherwise the problem could be linked to the dock Express (Replicator of port express?)

  Maybe the 1600 * 1200 resolution on external monitor is too high for the express port replicator and so there are some questions which s my personal suggestion

• Tecra A10 - 11 M unable to connect wireless with protocol draft n

  I have a Tecra A10 - 11 M, which has the Atheros AR5007EG wireless card. My OS is WIndows 7 64 bit.
  Although it connects up to 54 Mbps Wireless, I can not get connect with draft n, which is supposed to support Toshiba Tecra peculiarities.
  I have installed the latest driver for my wireless card with (ver.8.0.0.258). Can someone help me with this?
  My router is ok because I connect my other laptop with 802.11n without problem.

  Hey,.

  Where you can find this information as the Tecra A10 - 11 M N support project?

  If I search on the Toshiba Web site for several models Tecra A10, take all support 802. 11 b / g only.

• How to find the source IP address of open session with VC

  I gave only a single journal id for all users in my virtual environment. They all use the same ID for their own use. My question is how do I know the source IP address of the active\idle open session with VC?

  VC Server - version 4.0 - 208111
  vSphere Client - 4.0 build-208111
  Servers ESX - 3.5 build-238493

  Thank you

  Ganesh

  Take a look at the thread below, it might be useful

  vCenter session - find origin of connection