Tecra A11 - 11N - after that the BIOS update programs not loading now

Similar Questions

• After that the BIOS update can not use Debian

  I upgraded to v3.70 Bios and now my Debian has following problem:
  at the start of the adage about stucks kernel:
  PCI: BIOS Bug: f0000000 MCFG area isn't E820 - reserved.

  Did I screw the upgrade (Win startup, run the bios update and follow the instructions)? Or is this normal?
  How can I know Toshiba, they have the bug in the BIOS?

  Stepan

  Hello

  After the BIOS update you can use delivered and supported operating system (recovery image)?

• After that the BIOS update cannot start my Satellite L305-S5885

  Last night I've updated the BIOS of my laptop, but when the completed BIOS flashing, she restarted Windows. The machine could not start. The CD/DVD device go into a cycle with a yellow light and the screen does not appear anything. Can someone help me solve this problem.

  Old Bios: v1.40
  New Bios: v1.50
  OS: Windows XP with SP3

  I can't use the CD/DVD device to start with a Win PE.

  Thank you

  Hello!

  I think that the BIOS was not correctly because your computer laptop doesn't start up again.
  In this case, you can make t a lot of.

  Try this: remove the battery and the AC adapter, wait up to 1 hour and then connect the battery and AC adapter. Try it again and hope it works.

  If this does not work, you should contact a local ASP. In the worst cases, the motherboard must be exchanged :(

  Welcome them

• After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

  After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

  Have you tried these steps? If iTunes does not your iPad, iPhone or iPod - Apple Support

• Microsoft Management Console error: this function is not supported on this system. Also noticed that the automatic updates did not install it and returned error 80070005.

  Original title: Microsoft Management Console this feature only is not supported on this system

  I am running Vista 32 bit Business since an administrator account.

  Recently, I noticed that the automatic updates did not install it and returned error 80070005.   After investigation, I found that I could not open mmc at all and always get the message "this function no is not supported on this system.  No major changes have been made to the configuration to trigger it and I can't watch the event log because it is in the MMC.
  I have studied this question in line and tool the following actions, which none worked:
  carried out a complete antivirus scan (I use Commodo internet security)
  created another account administrator
  has run SFC (no problem)
  has run the registry cleaner (no problem)
  has run msconfig.exe and disabled all the startup process
  updated windows right click and run as administrator
  Started in safe mode and tried all above
  After that, I don't know where to go... it doesn't seem to be a download for Windows vista to reinstall mmc.
  I have about 50 updates critical, sitting in my windows update that can not install because of this problem.  Can anyone help?
  Jeff

  Hello Helpmehelpme,

  First, I would check since it is professional Vista was that computer on a field of work or it was already on an area of work? There may be group policies that are in place that prevent to run MMC.

  When did start to happening? Is there anything new on the system which has been introduced into the environment (software, hardware)?

  This thread gives a few steps trying to the original poster that you can't have.

• It keeps telling me that the required updates are not installed... I have already installed SP2 and restarted my computer TWICE. Please help me!

  He continues to tell me that the required updates are not installed in order to download and run Internet Explorer 9... I have already installed SP2 and restarted my computer TWICE.  Please help me!

  I wouldn't bother downloading it, but I need for a course that is only compatible with IE9... He is constantly telling me that "Setup does not support this pack", even if the sine qua non pack has been installed!

  Hi stephprice,

  I suggest you follow the articles provided below and check if it helps.

  http://support.Microsoft.com/kb/910339/

  http://support.Microsoft.com/kb/971058

• SP 2 settles - gives a message telling me that the bios updated to the needs

  Original title : Sp 2 downloads ok, but used to install

  I have a dell latitude d820 32bits that originally had xp on it,

  I installed vista on it from a backup I did on an advent computer (purchased new mine).

  I managed to install ie9 on it, but it tells me that I need to install sp2,

  I tried to install after the download from windows update and microsoft own website, but always the same problem, I can't get sp2 to install even if ok, it will download

  I got a message telling me that the bios needs updating, and my opinion is that, even if the software came the computer still thinks it's a dell and this is the problem

  Hello
   
  1. What is the full error message?
  2. is the specific question of the installation of Windows Vista Service pack 2?
  3. you receive update of the BIOS message during the installation of SP2 or elsewhere?
   
  Method 1:
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 2:
  
  Put the computer in a clean boot state, download and install the Windows Vista Service pack 2 and see if that helps.
  Download here:
  http://www.Microsoft.com/download/en/details.aspx?ID=15278
  Clean boot:
  Here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
   
  Method 3:
  Update (Flash) your BIOS
  The main function of your system BIOS is to recognize and initiate any material that your system is ready to be used. It is synonymous with updating the BIOS of the motherboard to the latest version of "Flash" BIOS. The times often requires a floppy drive must be installed on the system.
  Please visit the site of the manufacturer of your motherboard for instructions on how to check the version of your BIOS and tools, that you can use safely update your BIOS.
   
   
  Reference:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  
  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
   
   
  For more information, see:
  
  To find out what operating system is installed, follow these steps:
  (a) click Start right click my computer
  (b) click on properties

• Satellite A100 PSAA8K stuck in the BIOS after that the BIOS is flashed

  Hi all

  I used the utility to update the BIOS of Toshiba on this machine. It was working fine before, now it is blocked with the Toshiba Startup logo. Pressing F2 or F12 don't work. Pressing ESC. Gives the following error. No TPM or TPM has problem. Everything else seems as usual. It shows the BIOS 6.00, which is what I had in theory flashed to.

  I guess the flash gone bad. Is there a disaster for this recovery procedure?

  Hi guys

  It seems really turned something went wrong during the BIOS update process.
  Perhaps a new module ROM BIOS flashing could solve this problem.

  The point is that you need a BIOS version of special rescue and the drive to reflash the module ROM.
  But only the authorized service provider has such special rescue tool and only the ASP technician can reflash the BIOS.

  So maybe it's not a real solution but a tip how to get a solution
  I would recommend so contact the ASP in your country for the control of the laptop and a reflash BIOS.

  Best regards & good luck

• The BIOS update does not work on the Satellite - cannot load PHLASHNT.sys

  "Cannot load the PHLASHNT.sys driver.
  It gives then a few silly respons to check if you have admin rights or not.
  Under windows, very nice everyone has admin right here, that the problem with this :-/

  Hello Clemens,

  PHLASHNT. SYS is flash Phoenix NT driver that is necessary if you're updating a Phoenix BIOS. However, you don't tell what Satellite phone model you update or what version of the BIOS update you are using (Windows or traditional). Please send additional information so that we can try to help you with your problem.

  Kind regards

• Satellite P205D-4378 crashed so that the BIOS update

  Hello everyone,

  It is my first post on the forum, although I've read here a lot.

  My problem seems to be classic: had several problems with my Satellite P205D-4378 crash.
  Visited the Web from Toshiba site, they have a BIOS update that fixes the problems that I have. I do the update, CRAAAASH!, dead computer.

  Death seriously.

  Turn on the other computer, search, find a few websites on "crisis recovery disk Phoenix.

  I read religiously, run to the store, buy a FDD, some readers, usb, the Bios file download, rename, make the drive...

  Trembling with anxiety, I press FN + b, switch on the machine, and it works!

  Well well... at least the works of the Zombie fashion: pink LED, high speed fans, manages the USB FDD, begins the USB FDD, he read for a good two minutes! Then nothing.

  'It's ok, it'll be ok' I think. The starting block is a program that is not more than 4 k, the computer has no bios, impossible to use anything, and must digest a 1000 k bios.

  I wait, nothing happens.

  SO what now? I tried the 'start FDD' ten times at least. Last try, I waited all night! I Went sleep after the computer read the floppy).

  Whatever I do, once the disk has been read, nothing happens.

  I turn it off, I unplug it, I try with battery, no battery, I speak well, I insult, I pray, I cry, I swear... NOTHING WORKS!

  I do something wrong, somewhere.

  On my drive are the phlash16.exe, the minidos.sys and the bios.wph (extract from a file named AASA40. ROM, downloaded with the pack zip on the toshiba site)

  What should I do? I read it on some forums that computer makers like Dell and Compaq deliberately disable the Boot Block Flash, is the same thing with Toshiba?

  The latest version of the bios that I have downloaded is corrupted?

  Is it possible that my motherboard is physically by the update failed? In this case, is it easy to replace yourself?

  I don't want to be ripped off by Toshiba for repair, if the only thing that I miss so far is a combination of keys at the end of the flash Boot Block recovery...

  In short, I'm lost.

  No idea to this wonderful group of reflection?

  Thank you

  Baaharb.

  I think that the update of the BIOS based on windows is security more like an update of the traditional Bios.
  Why? Because using the traditional BIOS there is always a risk that the wrong BIOS would be used.
  The BIOS using focused on victory, this risk does not exist.

  I know a lot of people who uses a bad BIOS and damaged module BIOS ROM.

  Anyway. To show you, I think that there is one solution as mentioned by delvoie, you will have to contact the local ASP.

  See you soon

• After recommending the bios update, hp dv6131od running xp pro sp3 will not load windows - is there a wa

  After installing an update of the bios recommended on the hp website my dv6131od running xp pro sp3 will not load windows

  Update does not seem to have problems - failure, lack of time for flash, backup, etc.

  boot sequence seems normal (finds it a bootable cd in the drive, etc.), but windows won't load in safe or other mode

  next steps?  is there a way to access the BIOS?

  Thank you

  There is a simple solution to this problem.  The HP Online Crash Analysis Team has finally responded to my email after 34 days.  I had given up hearing from them despite several requests to repeat.

  I had completely disassembled the laptop trying to find the bios setting the jumpers on the motherboard in response to an idea contained in one of the PM, I sent... all to nothing does not...

  OCAT told me to look in the BIOS under "system configuration" for the Native SATA support.  The last update of the BIOS resets this point 'activated', but that only works for Vista & Win 7.  This must be set to "disabled" for XP and previous operating system.

  I hope that this post will save someone having to wait 5 weeks invest hours of work for a solution that took 3 minutes!

• Re: Tecra A10 - where are the BIOS updated release notes?

  Hello

  I have a problem with my Tecra A 10, it sometimes turns off.

  I have updated BIOS 1.4 3.0 BIOS to see if it suits it.

  I can not find the release notes to see what has changed between revisions of the BIOS, can someone point me to them?

  Thank you
  Dominic

  Hi Dominic

  And now is the problem solved?

  On the page of European support, you will not find this info but WE manage the page there are a few information about it.
  Download page HERE you can find for us Tecra A10. Check the 3.0 update BIOS and look for info on the change history.

  To be honest, BIOS are the same.

• Re: Satellite C660 - after the BIOS update can not connect to Internet

  Hello
  I've recently updated my BIOS on my Toshiba Satellite C660 1.70.
  Everything goes well, but when I rebooted and tried to connect to the internet, he could not.

  I thought that there was a temporary error, but it's been 3 months and it has still not repaired.

  Can you help me? Thank you!

  Have you tested with WLAN and LAN connection?
  Have you noticed the same problem using two connections?

• USB no longer works after that the BIOS flash to ABCN74WW on the new Z70-80

  Hello

  I started with the installation of Windows 7 on my brand new Z70-80 which worked well, worked USB 2.0 ports.

  After flash BIOS to ABCN74WW USB ports do not work any longer. I already tried soft reset BIOS by unplugging the power supply and the battery by pressing the power button for 20 seconds. USB ports are still inaccessible after that, a USB flashes for a moment, mouse LED is lit but no laser and no operation at all. Even when I start any new installation of windows.

  Is it of any known issues with this version of BIOS? Can I cancel the flash BIOS?

  Kind regards

  I do not remember on an option to backup the bios and certainly did not do. In any case, the upgrade from windows to 8.1 solved my problem...

• After the BIOS update can not startup Satellite C640 using USB key

  After upgrading my bios Toshiba Satellite C640-10F (PSC02E) to WIN 2.00, I can't boot the laptop using USB key, when I checked the BIOS with F2, I was stunned because the USB port connected to the laptop has been labeled as FLOPPY drive. Y at - there no possibility to downgrade the BIOS?

  Thank you

  Stand by.
  Set the BIOS to default and after restarting, use F12 to get into the boot menu.
  USB option is available there?
  What is saved on your USB device? I mean why do you want to use device USB to boot from it?