Tecra A11 no sound by mini Displayport

Similar Questions

• Tecra A11 - Video No. via mini DisplayPort

  Hello

  I recently bought a mini DisplayPort-> HDMI cable to use with my Tecra A11 Notebook. My intention was to run two external displays by running a cable VGA for my LG W2242 monitor and run the mini DP to HDMI Cable to my HP 2509 m Monitor. Unfortunately, I can't get my HP Monitor to recognize the video Signal from the mini DIsplayPort.

  I downloaded the latest drivers for my laptop, but still no luck. Is there something special I should do to get the mini DisplayPort to send a video Signal?

  Any help would be greatly appreciated.

  Kind regards

  Landon

  Now to maybe stupid question, but where did you get the info that you can use two video output ports at the same time? What is this described in manuals s?

  In front of me, I have Tecra A11 - 19 M and would like to know how to use it. as far as I know that a single external display can be used with this laptop.

• External audio device for Tecra A11 - 11H

  Although the Tecra A11 - 11 sound better than most laptops, I would definitely come back to the full sound quality.
  Without any audio output the possibilities seem very limited.
  USB speakers seem to be either very low powered or high-powered, expensive, or boom-box.

  My daughter, a Windows user, has one of those gadgets
  http://www.cclonline.com/product-info.asp?product_id=57743&TID=gsearch
  with its 5.1 speakers and the result is really good (and I already have the same set of 5.1 speakers, currently unused).
  The problem is of course that Creative do not cooperate with the world of SILK.

  Does anyone know of a similar product that works well with Linux?

  There is in alsa:
  EDIROL UA-1000 and UA - 101
  Tascam USB Audio/MIDI ?
  ? interfaces or controllers US-122, US-224 and US-428
  Native Instruments RigKontrol2 ?
  ? * Native Instruments RigKontrol3 ?
  ? * Native Instruments Kore Controller ?
  ? * Native Instruments Kore Controller 2 ?
  ? * Native Instruments Audio Kontrol 1 ?
  ? * Native Instruments Audio 2 DJ ?
  ? * Native Instruments Audio 4 DJ ?
  ? * Native Instruments Audio 8 DJ ?
  ? * Native Instruments Guitar Rig Session IO?
  ? * Native Instruments Guitar Rig mobile ?
  ? * Native Instruments Traktor Kontrol X 1
  all this must work well...

• 32 envy: no sound on HP Envy 32 via mini DisplayPort to DisplayPort cable on Mac mini

  I recently bought a HP Envy 32 monitor and hooked it up to my Mac mini using a mini DisplayPort (i.e. Thunderbolt) DisplayPort cable. The video works fine @ 2560 x 1440, but I have no sound. The output sound in references to system preferences "the selected device has no output settings" for the 32 envy. The sound works fine when I use a HDMI cable, but then, the resolution is limited to 1080 p. The Mac mini is a mid 2011 model, which is able to transfer the audio via DisplayPort, SAA as far as I know. Any suggestion on how to solve this problem?

  Figured out how to get mini-displayport audio to work with the HP Monitor (I have a Macbook Air)

  In addition to choosing the HP monitor HP ENVY 32 audio in the PREFERENCES SYSTEM-> SOUND->-> OUTPUT

  An adjustment should also be made to the AUDIO and MIDI CONFIGURATION.  You can either do a search for it in the finder, or it is in APPLICATIONS-> UTILITIES-> setting up Audio and MIDI

  1. Open the app
  2. In the left menu, select DisplayPort
  3. Format of... Replace with 48000,0 Hz 2-channel 24-bit wide

  Once changed, you should be playing audio from your monitor.

  Good luck.

• Tecra M11-103 - mini displayport doesn't seem to work

  I posted a question, but it was published, and I think that I misunderstood.
  So I'll try to ask better now...

  I own a Tecra M11-103 it has both a vga port/bus (I'm not sure what to call it) and a mini displayport.
  Everything worked fine until, in the middle of watching TV (laptop was connected to the TV via hdmi adapter mini displayport has) something was wrong, and since then the port is not identified... the vga port works fine but the mini displayport simply ceased to recognize each time a cable is plugged...

  How can I reinstall the port itself?
  I tried to reinstall the display driver, but it did not help, I thought maybe reinstalling the chipset utility, but I don't know what this means and what is the danger...

  If my question is still not clear please help me go the more accurate information...
  Thank you
  Etty

  Hi mate:
  Please do not always start new threads on the same topic.
  Please follow this first thread to avoid misunderstandings:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=237063

• TECRA A11 - listener low sound quality up to THE

  Tecra A11 provides * low sound quality * (iTunes) connection to my hifi system * via Headphone out to THE * in. An Apple MacBook connected in the same way does much better. No idea how could improve the quality? Thanks in advance!

  Hmmmmm... have you tried to change the sound, equalizer settings of player?
  Open Control Panel and make sure is it y audio Manager Realtek (Realtek sound card) and play a bit with the parameters of sound effects.

• Tecra M11 - 120 Mini Displayport to HDMI

  Hey there...
  I received my new laptop and bought a HDMI adapter mini display port.
  On my television, I asked the connector, so I made to the map.
  I also introduced the option in windows 7, I would like to ampilfy my TV, screen went black.
  then I tried only to use television as the main screen, it worked only the solution of 800 x 640 pixels.

  Can you please tell me, what am I doing wrong? Mini Displayport is expected to be able to perform the Full HD 1080 p. And I only wanted to 1360 x 786.

  Welcome them

  >.. .She works perfectly with my pc monitor (LG), but not with my TV (MEDION), it could be something wrong with her as well.
  I agree with you. From this sentence we port the most important information about your laptop work properly. Why you don't have pic on your TV is another question.

  Check the settings of your TV. Perhaps something to be activated it.

• Tecra A11 - 17V unable to connect to the WLan

  I have a Tecra A11 - 17V 15.6-inch and the problemis that i can´t get conection WiFi at home.
  With all of the other devices I come in my WLAN and the Tecra also in others, but not in mine.

  It is a WPA2-PSK AES and 128-bit encryption.

  This may be the cause?
  Best regards

  The wifi connetion couldn't work for different reasons.
  That is to say the Wlan standard could not be supported, or there might be a problem with the compatibility of encryption.

  You can perform a simple check.
  Disable the wireless encryption in your router settings and try to connect to the laptop to open Wlan (unsecured).

  Of course, this should be done just for testing purposes and the Wlan must be always well attached.

• Tecra A11 - USB is not loan Express Port Replicator II

  Hey people,

  I'm absolutely fed up with this, so I hope you can help me with this: Iam using a Tecra A11 with Express Port Replicator II. There are three problems:

  1 USB mouse and USB keyboard are not ready to use so that until that Windows7 is fully loaded (BIOS Mode)

  2. There are USB devices such as USB-HDD, TV Tuner, telephone mobile-station host connected to the port replicator. Laptop remains in the Boot Logo screen and does not start until I have disconnect all devices. So I have to disconnect it, restart it and anchor it again. quite annoying.

  3. using the 64 bit version of WIndows 7 and playback sound stops regularly for 2-3 seconds when I use the speaker plug from the docking station. Using the plug in the laptop itself - no problem.

  I am absolutely fed up with it. Anyone have any idea?

  Thank you!

  Hey Buddy,

  With regard to the problem of USB:
  You have enabled USB legacy support in the BIOS? As far as I know, there is always such an option in the BIOS and it must be allowed, if you want to use USB devices before Windows starts.

  And using his most recent drivers for your laptop? You can check it on the Web from Toshiba site if a newer version is available:
  http://EU.computers.Toshiba-Europe.com

• Re: Unable to run the HARD drive recovery in the Tecra A11

  My laptop is a TECRA A11 - 1 8 PTSE1E-07-J044AR with processor i5, 4 GB RAM and running Windows 7 64 bit. Recently I had a problem with one of the user (desktop profile) profiles and has not been able to create one despite several attempts, so decided to reformat to the factory settings. But nevertheless I tried the procedure, he went only up to the Boot Manager settings. After that, the warning screen never comes to the top and the laptop eventually normal startup.

  So I decided to ignore the recovery of HARD drive and installed Windows 7 32 bit through a CD of formatting of the main partition to C: drive, but keeping the recovery partition, just in case. Now, even if Windows installed fine, however, none of the drivers (LAN, WiFi, video, sound, etc.) are installed.

  Now my questions are:

  1 can I reinstall my old Windows 64 bit through the recovery of HARD drive? If so, how?

  2. can I continue with the newly installed 32-bit Windows and just install all the necessary drivers and utils from Toshiba? If so, where the sources?

  Would be grateful for any help.

  > 1. Can I reinstall my old Windows 64 bit through the recovery of HARD drive? If so, how?
  After the clean version of the OS that it is not possible to install the recovery image using recovery option of HARD drive due to lack of repair my option computer start-up advanced options (F8 at startup).
  You can install recovery using recovery DVDs image only. Did you create this recovery disk?
  > 2. I can continue with the newly installed 32-bit Windows and just install all the necessary drivers and > Toshiba utils? If so, where the sources?
  Of course you can do it. If Win7 32-bit is supported for this laptop model all the necessary drivers, the tools and the utilities that you can find on the download page of Toshiba - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

• min displayport - UK extension cable

  Hi guys,.

  I need a cable Extension Mini DisplayPort for my Mac Pro 2009 and Cinema Display 24 "so I can move my turn more away from the screen.

  Can someone please recommend a good cable to the United Kingdom as Apple do not have their own extension cable.

  Thank you

  I haven't used one of these types of extension cables, but found that-

  https://www.Amazon.co.UK/NEET®-DisplayPort-Extension-female-display/dp/B002SL34U 2.

• Can I see HD using Mini DisplayPort?

  I have a MacBook Pro with thunderbolt port and an iMac with mini DisplayPort. The iMac has a broken screen. Can I use the hd to the iMac using the thunderbolt port (and a cable thunderbolt course) MacBook pro mini displayport to iMac?

  Thank you

  Hello Alt - Max,

  If I understand this correctly, then I'm afraid, you can't. What I understand is that your iMac is broken and you want display MacBook Pro screen on this subject. If your iMac is broken, then you can not do this. However if your iMac is not broken, so here are the steps to configure the target display mode: use your iMac as a display with the target - Apple Support Display Mode

  Cheers, zerotwo77

• Can you connect mini displayport monitors with 2 crush

  Recently, I started thinking of owning a good monitor k 4 for my MBP and I were just interested, if you have cable thunderbolt 2, are you able to use it to the monitors that accept mini Displayport? The port looks like it will work and will work. Thank you.

  Yes, love at first sight includes the mini-Display port output and two ports have always been identical, since they evolved from the same technology.

• Activation of Mini DisplayPort after transplanting HDD internal?

  Just transplanted a SSD internal in a 2008 Mac Pro (who had two DVI input) in a most powerful 2009 Mac Pro (which has a DVI input and two mini Displayport inputs). Trying to connect two monitors, as well as the DVI input is fine but entered Minies Displayport do not seem to be working anymore, and I guess that this is related to the hard drive, as the mini Displayports were fine before the operation. Any advice on how to get these to work require a clean wipe and install Mac OS X?

  Thank you!

  What version of the OS is on the transplanted SSD?

• using the iMac 27 inch mid 2011 as an external monitor with a PC via mini DisplayPort

  I find conflicting information via web search to be able to use my iMac 27 inches, mid-2011 as an external monitor with a PC. Is it possible to use the iMac as an external display via the Display Mode target between Thunderbolt port of the iMac with a PC equipped with a mini DisplayPort?

  Of course, I hear it's possible with the appropriate cable. But if it is not possible, I would like to know for sure.

  Thanks in advance for your help with this. _henry

  Target display mode is Mac to Mac only. Use your iMac as a display with the target - Apple Support Display Mode