Tecra A11 - serial port does not
I have a Tecra A11 running windows 7 Professional (32-bit).
My serial port does not seem to work as I am no longer able to connect to the industrial PLC automation which requires the connection to the serial port for programming.
Some of the software I use is a RSLinx, Easysoft and others.
Any help on this will be greatly appreciated.
Hello
The serial port is properly recognized in Device Manager?
Do you have signs of yellow exclamation point there?
Try to remove the serial port of the Device Manager and reboot the machine to get this recognized again port.
Tags: Toshiba
Similar Questions
-
Tecra A11-110 (PTSE1E) does not load
Hi all
Recently my laptop stopped charging.
The battery is new and worked for a while. It works on another laptop.When I connect the charger, the laptop gets power, but it does not load. I guess it's always work around.
Is this a mistake in any sensor motherboard?How can I fix?
Is the motherboard 'dead' (for this purpose)?
Thanks in advance.
See you soon,.
Hugo.Have you noticed the problem of load using the old, original battery?
If the old battery may be charged correctly, I don't think that there is a problem with the laptop.You said you have tested this new battery in a laptop.
Have you tried using another model Tecra A11?Your comments would be appreciated.
-
Portege M200: serial port does not work with port replicator
Hello
I have a Tablet m200 and the top mentioned dock/replication PA3314-1PRP port.
As the M200 has no serial port (rs232), I want to use the one on the docking station, but it is not recognized as a device on my tablet.Thew network connections and usb ports all work fine and the lpt port is shown in Device Manager. I have restored the Tablet and it still does not recognize the serial port.
How can I get this port recognized so that I can use it.Thank you very much
LeeHello Lee
I just, I can confirm that when you use the Replicator port advanced III with Portege M200 several ports do not work. Problem is that Portege M200 does not support these interfaces.
This is a technical limitation and the port of mouse PS/2 port keyboard PS/2, serial port, I.Link (Firewire) port and DVI port will not be supported when Portege M200 is anchored on the Advanced Port Replicator III. :(
-
S-Video port does not work on Tecra M5
Hello. S-Video on my laptop M5 port does not work. I checked everything Svideo cable, TV and also the drivers. Everything works fine. Could you advise me please? How can BTW, I check the Svideo port?
Hello
There is not much to do
(1) Please make sure you use a S-video S-video cable and connect it to the TV
(2) turn on the S-video TV port - VERY IMPORTANT
(3) use the FN + F5 key combination to switch to TVAll that s!
-
MacBook Pro 13 "Retina Display Usb Port does not... !!
MacBook Pro 13 "Retina Display right usb port does not... I tried to plug in and out still it doesn't then I rebooted my macbook and again inserted the USB, it worked... !! Why this problem is caused? today is the 5th day since I bought my macbook... !! Also last night so he was working in final cut pro that freezes... the keys of my keyboard and trackpad it works do not totally got hung up... and then I pressed my power button after the restart, it was ok... Parachuting also does not work between my iphone and a macbook... say Bluetooth not connected to my phone eventhough after pairing... suggestions and advice? Help me please I am confused and worried... !! It's just the 5th day... !!
Reset the SMC > reset the management system (SCM) controller on your Mac - Apple Support
-
One of my usb ports does not work. A top forward on a MacPro 3.1
So I plugged it in a charger to charge a battery. He went for about 1/2 hour then I got a message a lot of power, port and it will stop the port. Something like that. So now the port does not at all with any device. Can this be reset?
Running OS 10.6.8 snow leopard. 3.1 MacPro Tower.
Try a reset of the MSC...
-
NB200-12N - USB port does not work
Hello
I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
But does not work.Thank you
Paulo
If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.
Try reinstalling the chipset utility.
By the way: two other ports work well, right?
-
Cannot register Portege 205 - serial number does not exist
I can't access path by recording my Portege 205 on Russian site as my second notebook.
Serial number does not exist has been the answer.
What can I do to fix this?Hello
Has used the right serial number?
Please recheck the number on the label that you will find at the bottom of the unit.
Please don t mix letters and numbers. Sometimes people mix the 0 and o for example.But if you think you typed a number and recording not work so I would recommend contacting the Toshiba service will partner in Russia. Technicians can finish the registration process.
PS: I hope that you bought from the computer store and not somewhere in the dark backyard ;)
-
Satellite L650 - 12N USB Ports does not work
My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
It shows a yellow exclamation mark on my system.I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
Under the key USB gives error code 43, I do not understand.The webcam and the wireless card no more.
This boot problem after a storm in my area some time ago.Please can someone help.
Thank you
SaniHello
> This problem start after a storm in my area some time ago.
Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems
I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.
But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you
-
Satellite Pro 6100: USB port does not work after the return of the mode "Eve"
I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.
Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.Plug the mouse on or off doesn't change anything. Only restart helps.
Any ideas?
It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?
-
HP 15-AF006AX: USB 2.0 port does not work
Hello
I installed window 7 in my new laptop, but the usb port does not work in the case of data transfer.
and I am not finding a driver for this, can you help me for this problem
Thanks in advance
Hello:
The only suggestion I can offer would be to settle the AMD Chipset drivers from the link below the problem.
You want the first file on the Web page. Install and reboot the PC.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
-
El Capitan USB port does not worked well under Yosemite.
Running a VMWARE image of the Linux kernel using a Sentinel of SafeNet USB license dongle canned.
Has worked perfectly under Yosemite unfortunately too long to go back.The USB port does not work with other USB devices?
I suspect an incompatibility with the EC and the sine of dongle USB EL strengthened using third kexts. They must be signed, and so a softer update for the dongle is probably necessary.
http://arstechnica.co.UK/Apple/2015/09/OS-x-10-11-El-Capitan-the-Ars-Technica-re view/8 / #h1
-
USB key into the USB port does not appear in 'my computer '.
Original title:-drive Flash USB port does not appear
I have laptop Dell A 4 years and cannot use USB ports. My data flash drive lights flash but nothing shows up in 'MY Computer'
It turns out that there is a problem connecting to the motherboard... so it ' s not worth repair. However, I believe that I can connect to the Internet by the yellow cable supplied with the router. There is also a card I can buy known as PCMIA card that will give me 2 additional USB ports. It's cheap enough to give it a try.
Once more a big thank you to all those who have offered their advice on this matter. I'm amazed that so many people are willing to give of their time to help a noviceTerry
-
series PCI and ocy port driver easy serial port can not get driver Windows 7 Professional
series PCI and ocy port driver easy serial port can not get driver Windows 7 Professional
Hi Louis,.
What is the brand and model of your computer?
You can visit the computer manufacturer and try to install the latest version of the Chipset drivers.
Also try to use Windows Update to update the drivers and check if it helps.
Automatically get recommended drivers and updates for your hardware
You can also get in contact with the support of computer manufacturer for assistance.
Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.
-
802. 1 x authentication port does not
Pass the info:
SW-ConfB > sho worm
Cisco IOS software, software of C2960C (C2960c405-UNIVERSALK9-M), Version 12.2 (55) EX3, VERSION of the SOFTWARE (fc2)
Port config:
interface FastEthernet0/11
switchport mode access
authentication event failure action allow vlan 900
no response from the authentication event action allow vlan 900
Auto control of the port of authentication
dot1x EAP authenticator
dot1x tx-period 5
The RADIUS server info:
key acct-port 1646 1645 auth-RADIUS-server host 10.0.1.52 port 802.1 x!
A little confused why not package Radius comes even from the switch. Any tips?
According to debug it, it seems that the supplicant connected on the switch port does not support the dot1x and MAB is not configured on the switchport so no method left to try and you got the vlan COMMENTS.
3 Mar 04:37:47.963: % AUTHMGR-7-RESULT: authentication result 'no response' of 'dot1x' for the customer (d4be.d907.9637) on the Interface Fa0/11 AuditSessionID 0A000103000000090B4AD0F6
* 04:37:47.963 3 Mar: % AUTHMGR-7-FAILOVER: failover "dot1x' for the client (d4be.d907.9637) on the Interface Fa0/11 AuditSessionID 0A000103000000090B4AD0F6
* 04:37:47.963 3 Mar: AUTHMGR-7-NOMOREMETHODS %: exhausted all methods of authentication for the clientAt this point, the RADIUS is not even came into the picture. Please make sure that the end customer is configured correctly for the dot1x parameters.
Kind regards
Jatin kone
* Make the rate of useful messages *.
Maybe you are looking for
-
Problem with installation of Sierra
Hello everyone. I ask for your help and sorry for my English. I tried to perform a new installation of Sierra -J' made a clone with the CCC to my Mac Book Pro (mid-2014) SSD for a backup external hard drive. Perfectly executed -Created the installati
-
show only the music downloaded in shuffle
On my iTunes on my PC it shows all the music that I bought and when I shuffle it loads the songs that have been purchased but not downloaded, which means that it broadcasts songs that are not downloaded, but were purchased. I only want to listen to m
-
Satellite 1400-103 works 10 min then shuts down completely in WMP or WinDVD
Hi, I need help with my Toshiba S1400-103. Initially, it would not load WinXp. It would save power as options GUI installation process. Then I ran an installation on a different machine and then brought back the HARD drive to the S1400-103. It starts
-
How to run repair downloads when the local disk (c) is bad, system32, rundll
I am home with one leg broken, broken arm, a broken jaw and having my left shoulder replaced, my question, can I me pls someone, anyone, to come and go in my store and get my sled 5lb.hand, I have six kids and they will get no money, in any case, my
-
SEO QML controls a level lower.
I always got arround without this requirement, but I'm curious to know how this is possible. asset > Main.qml asset > EditPage.qml asset > controls > CustomListView.qml asset > controls > MyItem.qml Main.QML: import "controls" Page { CustomListView: