Tecra A11 speed on the fan at 100% all the time

Similar Questions

• My Satellite A100 GPU fan works 100% all the time

  First: I have the Satellite A100-440 with GeForce Go 7300 and XP Professional (and Ubuntu).

  There is something wrong with thermal control. The first PC Wizard has always shown that the temperature of my GPU is "a very large number" and the fan is runnign 100% all the time (the main problem). Then I installed ATItool hoping he would show the temperature correctly. Well, it worked in part. Now when I check the temperature with PC Wizard, it indicates the temperature of the GPU normally (like 30-40 degrees celsius), but it also shows the GPU Diode temperature it's "a very large number" (as 4.294967E + 09 C) and the fan will operate at 100%.

  I tried to control fans with RivaTuner, but nothing happens.

  So if anyone has an idea how I could continue to solve the problem, I would be very grateful. I don't know if the problem is with the hardware (I could take this service) or with the software...

  Thank you!

  Post edited by: Avilja

  Hello

  Why are you talking about 'problem' and 'solve this problem?
  I see no problem!
  First of all I'm not all 3rd party applications that monitor temperatures. I'm not 100% sure if these applications provide a good values.

  However, as far as I know the laptop was shipped with Vista and not XP and Linux. You do not use a factory settings. It seems that you have set up the laptop with new applications and you should know that all the software installed and running insists on the CPU and other parts.

  BIOS fan table supports different temperature and cooling of the speed measurements. This means that if the temperature rises to a higher level, the cooling module starts and tries to decreases the internal temperature.

  Usually the temperature depends on the use of the laptop. If several processes of the OS are running in the background, that the CPU performance are high, the temperature rises and the fans start to run. There is nothing unusual about it.

  Furthermore, the dust and debris inside the laptop might have a bad influence on the laptop cooling. From time to time, it is advisable to clean the cooling modules.

  Last but not least the laptop must be placed free on table to ensure the circulation of air correctly. Don't forget that there is enough free space around the laptop.

  Finally, I must say that one of my friends has an A100 and the fans run correctly.
  This means that the cooling modules works with maximum performance while playing games or using graphics software.
  However fans do not work with maximum performance using only common programs like IE software or office.

  Good bye

• Tecra A11 - problems of the more recent/video BIOS

  Hi all

  I just got a Toshiba Tecra A11 the other day which is out of warranty (Refurb). When I got the laptop there is a problem where the photo was displayed at 1024 x 768 and biased (in BIOS). Image 1-2cm off the screen to the left, with over the space of 5-6 cm black to the right of the picture, the low 2-3 cm of the image were also the bottom of the screen.

  I installed Ubuntu Studio initially and attempted to force the display to a wide screen resolution. I didn't have a chance, I also installed Win7, but still with the latest drivers, I had no chance.

  It was strange because the BIOS was displayed in the same way, so, naturally, I decided to upgrade to the latest version of the BIOS. The BIOS of the laptop is quite old (end of 2009).
  I downloaded the update to the BIOS of Toshiba web site and ran the update.

  The new BIOS has been installed and rebooted the machine.
  However there was no image displayed on the LCD screen, windows startup has done successfully, if I connect to an external monitor to the laptop I brush. When starting the laptop backlight LCD lights.

  My question is: what can I do to fix this? Is a tool of recovery or down to BIOS available? Is it possible to reflash the bios? What is recommended?

  Thank you.

  > The new BIOS has been installed and rebooted the machine.
  > However there was no image displayed on the LCD screen, windows startup has done successfully, if I connect to an external monitor to the laptop I brush. When starting the laptop backlight LCD lights.

  This means that everything is ok with the external monitor?
  You can access the BIOS by pressing F2 and you can set it to the default settings?

  Usually, you can switch between the external and internal view using the FN + F5 key combination. It work?

• Tecra A11 - cannot start the BIOS update

  Hello

  I downloaded the latest update of the Bios B2.50 - EC1.80 for Tecra A11-127 (PTSE0E. Wenn I start installing, an error occurs: "this computer is not supported", but my laptop is an A11-127 with Partnumber PTSE0E, why it doesn't work?

  Why is he not possibel to download an old Version of the Bios?

  JSpindler

  Hi jspindler,

  The question is why you want to update the BIOS? This update should be carried out only if it of really necessary. In addition, only the most recent update of the BIOS can be downloaded as it fixes most problems.

  In any case, you need to start the BIOS as an administrator and you should decompress all files from zip archive before start you. Also, make sure that the value added package is installed.

  By the way: what operating system is installed?

• After a virus infection, the App Data/Roaming/swcltb.dll is missing from my computer and the fan use 100% all the time

  Here's the problem:

  My computer was happening slowly, so I did a virus scan and it turned out that my firewall has been closed and wouldn't load up. So it took me some time to solve the problem by following these steps: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/windows-firewall-cant-change-some-of-your-settings/2679690e-c375-4232-ae45-404374386635?page=6 naernxp post, it solved the problem.
  Naernxp suggested from virus scan so I Redid the scan for malware and all then it deleted the file swcltb.dll. I thought it was the virus so I ignored it, but after restart pc my firewall has been set, but the computer showed that the swcltb.dll file is missing and CPU usage was 100% nonstop.
  Before that virus scanning, my CPU usage was normal.
  RAM: 2 GB
  Processor: Intel (R) Core (TM) 2 CPU 6420 @ 2.13 GHz

  This file is not a base file MS Win, I suspect it is a residue of the infection

• Tecra M5 suspended at the time of the switch mode sleep after update Bios 3.2

  I bought a new Tecra M5 - 104. February 6, 2007
  Toshiba Assist button or the presentation button worked. After trying everything I tried a Bios upgrade, found and installed 3.20

  Still buttons don't work and now Hibernate and standby does not work either.

  Hello

  I'm don't know if this will help, but try to reinstall the TOSHIBA common Modules.

• How to speed up the time to query result

  When executing the following query, the result comes after 22 seconds.
  
  How I minimize this time? Please suggest.
  

  SELECT DISTINCT
         PERIOD_NO,
         ITEM_CODE,
         ITEM_NAME,
         SUM(CASE WHEN LEVEL_TYPE IN 'SUB ZONE' THEN WD_FORECAST_QTY_BU / CNV / ML ELSE 0 END)TOT_FRCST
  FROM   SHEET_HEAD, SHEET_DETAIL, ITEM_DETAIL
  WHERE  WH_SYS_ID = WD_WH_SYS_ID 
  AND    ITEM_CODE = WD_ITEM_CODE(+)
  AND    PERIOD_NO BETWEEN :PERIOD1 AND :PERIOD2
  AND    WH_REVISION_NO = 0 
  AND    WH_LEVEL_CODE NOT IN (SELECT WH_LEVEL_CODE FROM SHEET_HEAD WHERE WH_REVISION_NO = 1)
  GROUP BY   ITEM_CODE, ITEM_NAME, WH_PERIOD_NO

  Sanjay

  Hello

  with speed suggest it would be always be expirement with indexing on parameters, after that first scans all what is currently happening in what concerns analyses of full table etc. which are "more expensive."

  Level of the specific actions on your code, that what follows comes out too expensive; -

  AND    WH_LEVEL_CODE NOT IN (SELECT WH_LEVEL_CODE FROM SHEET_HEAD WHERE WH_REVISION_NO = 1)
  

  Here, I would see if you can rewrite, perhaps with a left join / auto join to achieve the same ends, compare the timings, you might be surprised.

  Kind regards

  Robert.

• Tecra A11 - Compatible to express port replicator?

  Hey people, does anyone know if a Tecra A11 can be used with version PA3508E of the Express duplicator?

  Cannot afford the new while I'm between jobs, and I saw one of these 2nd hand on ebay.

  Hey

  Replicator Port Express is not compatible Tecra A11 and Tecra A11, you use the Port Replicator II with PA3680E-1PRP part number specifications.

  The second version of this port replicator is designed for these new models such as the Tecra A11 :)

• Speed up the revision of the app

  I submitted a request Thursday to the World Bank for blackberry. Due to an upcoming event, I need to get the approval of the application as soon as possible. Is it possible to speed up the time of the review?

  My application was approved early in the morning Monday last week!

• Satellite A500-17 x the speed of the fan will never 100%

  Hello

  The speed of the fan in my toshiba Satellite A500-17 x can never go 100% speed. Is there a way to manually control the speed of the fan? The fan speed goes up to 75%, even in game, he'll only at 75% of dish.

  Thank you.

  Hello

  You can change some settings of Windows 7 power management.
  Here, you can control the CPU processing and performance of cooling module.
  Power management is the only place where you can change these options.

  Welcome them

• Tecra A11-128 does not start - black monitor, only the fan is on

  My laptop starts to boot, a few seconds later, the fan runs all the time and at full power. Here the detailed steps:
  -Push the Start button (battery led is green)
  -the hhd led is green for a short time, then off
  -l' screen is black all the time
  -After a few seconds, the fan starts at full power
  -That deer situation change either, I must break with 5s on the Start button

  I tried several keys (Fn + F2, ESC, F5) while starting up, as an external monitor. Nothing has changed.

  Who has an idea? Thank you very much for your help!

  Hello

  If the start of the BIOS (or Toshiba) screen does not appear, it means that a serious motherboard hardware problem can cause this RAM modules or malfunctioning CPU would be possible
  Recommends checking the memory RAM and CPU modules
  The RAM modules could be replaced easily but it of difficult to replace the CPU and test it. Therefore, it would be a job for a technicians for laptop

• Tecra 8100: Question on the temperature of the processor and speed

  advice please, I installed a p3 900 processor in my tecra 8100 and he sees it only as a 700. Since the Bios was outdated, I downloaded the latest bios which had no effect on its speed. However, as the update of the bios fan never happens that maybe a coincidence?

  Can any body advise me the temp for the processor and the motherboard. My diagnostic software shows 55(c) of the motherboard and 43 for cpu, no fan activity at all. The original processor speed was 600 and I expect the 900 full because I think this is a 100 mhz bus.

  Any help or comment gladly received thanks.

  Hello Peter

  I'm not an expert, but maybe don windows to see the t the correct CPU speed. I recommend you to use a tool (clock THG) which indicates the speed of the processor.

• Tecra Z50 A-h-13 - fan works half of the time

  Hello

  I got a new Tecra Z50 A-h-13 (i5, 8 GB RAM).

  Although the processor is underemployed (approx. 20% of capacity), the fan works half of the time!

  When the fan is running the Toshiba PC Health Monitor shows approximately 44% CPU temp. and 36% system temp.

  When the fan works not the Toshiba PC Health Monitor shows similar values!

  What is it good for?

  In my opinion, the fan is not alone. I have not found a possibility to adjust the speed of the fan (PC Health Monitor always shows 45%) or the starting temperature. The current Version of BIOS is installed.

  Is it possible to get a SMART fan control?

  Best regards

  Zvonko

  Hello

  The manual fan control is very limited.
  What you can do is to change some parameters in the Windows power options.
  Go to the control panel? power options
  Select the power plan you use.
  Then choose Advanced settings.

  In the advanced power settings, you will find the option method Cooing and the performance of the processor.
  I recommend you degrade the performance of the max processor at 90-95% and to change the method of passive cooling (both for the battery and plugged)

• How to adjust the speed of the fan on Satellite L450D?

  My L450D has been making warm lately (~ 100) and I need to know how to change the fan speed enough desperately. I'm on the last BIOS v1.33 and still no change.
  SpeedFan simply doesn't work.

  Can I get help?

  Hello

  Mobile computers to control the cooling fan is quite limited and on Toshiba laptops, you have an option only. Enter power options advanced power profile that you use and you will find option methods of cooling options.
  Put please the optimized battery and it must reduce the speed of the cooling fan.

• Upgrade to Win 8.1 the fan runs all the time and Raw (Silkypix) converter consume 100% CPU resources

  Hi, after upgrading to win 8 to 8.1 win my converter (Silkypix) raw program running extremely slow and consuming 100% of CPU. VAIO all updates completed, all Win 8.1 updates made. ATM Radeon HD 7500 M / 7600M (Maj) with 2 GB RAM dedicated.

  In addition, the fan works almost all the time that was not the case with Win 8.

  Vaio SVE1712Z1EB with 8 GB of RAM, i7 processor execution.

  SeanQ, after some time looking for a solution I finally found it on one of the vaio sites forum: it is the Radeon driver that must be installed from the Vaio support site. NOT the driver the latest AMD site. It does not solve the problem.

  I did as follows: device, graphics card, Uninstall Manager. Did not help. Went to AMD in Program files. Setup.exe has begun, but instead of installation, clicked on uninstall. In this way, I uninstalled the driver former AMD and bad news from the site of AMD. I had to manually uninstall the driver in Device Manager, several times. Finally, I went to the site of Vaio and tried updating the driver. He failed. Reset. Manually start the update of the Vaio AMD driver. Finally it worked.

  The fan is now more or less normal speed.

  Overall, I spent 15 hours looking for this solution. How much is my time worth? Just joking, I'm happy that I found the solution.