Tecra A2 - lost sound and ConfigFree, what should I do?
1. the device does not work, the "Sounds and Audio Devices Properties" indicates "No. Audio Device. Attempted relocation Sigmatel Audio and RealTek HD audio, but without success, what I try next?
Also, CofigFree does not work despite having tried a reinstall, at startup, an error message appears saying "not found TOSHIBA Network Device Usermode i/o Protocol. Please reinstall ConfigFree'... How can I fix it?
Thank you very much!
I m wondering what you did cela sound and Configfree don t work anymore? :|
Regarding the sound issue:
First, you must remove the software from Realtek sound system manager.
Control Panel-> software
Then go to Device Manager and remove the sound card in the list of devices (simply mark it and press DELETE).
After that restart the laptop, wait for windows would ask the audio driver and then point to the driver files that you downloaded from the Toshiba driver page.
Regarding the ConfigFree:
Usually the Configfree should work. If there is something wrong then you should uninstall the Configfree first.
Then you must restart the computer laptop and recommended to clean the registry using the CCleaner (it s free do google)
After this attempt to install this new.
Tags: Toshiba
Similar Questions
-
I added on a new printer and lost my audio. What should I do?
I added on a new printer and lost my audio. What should I do?
Because this isn't a normal behavior, please provide the following information:
What version of Windows you have, including the service pack (right click on desktop and select properties)
What is the brand and model of your computer?
What is the brand and model of the printer?
Describe, step by step, exactly how you have added the new printer.
Open the Device Manager (start > run > devmgmt.msc > OK)
Double-click any entry that displays a warning icon and a message in the box "Device status" report (also report what is the name of the device) -
Hello! My AirPort Express (802.11a/b/g) lights no more. I think he lost his power. What should I do to restore its power?
If AirPort Express light does not illuminate, this indicates that the internal power supply inside the Express did not, and the device will need to be replaced.
If you really a 802.11a/b/g in the Express version, it is at least 8 years old and probably much older than that. Average life of this product was about 3-4 years, then you have had surprisingly good luck with your product.
-
When a clip is cut, the sound disappears. What should I do?
Hello
I do a video with Windows Movie Maker and I added some clips to it. I cut some of them, but the problem is when I prune, the sound disappears. What should I do to fix this?
Instead of prune... try to split the clip and
remove the unwanted chronology part.Windows Vista - work with clips in Windows Movie Maker
(Divide and combine Clips)
http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-clips-in-Windows-Movie-MakerAlso... If you drag a copy of the video clip to the
Audio / music... He's going to react like any other audio device
clip. Maybe you can use it and cut video
track. -
I synchronize my Firefox
I have I have used very well, but now it creates problem
I have synced my Firefox but I have to enter password to connect again and again what should I doWhat will happen if I click reset sync in options, will I lose my data all the
My problem is solved
I unlike the device options and re-enter the details of the connection and the key synchronization and to synchronize my firefox again, this solves the problem -
I installed G10-ebook but when open it and write down the username and password it starts and stops immediately and closes what should I do?
Hello
Step 1: Check if the problem persists in the clean boot state.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.
The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Reference:
Using the event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=trueUnderstanding of event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=trueProcedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427 -
Equipped with Vista 32-bit, lost sound and cannot install the Realtek-get code 800705 b 4, can anyone help, BB * address email is removed from the privacy *, thank you
How does this relate to the features of Windows Update?
-
I do not own an adobe product and want to get a license payment for students and teachers, what should I expect? There are so many licenses to the choice and lightroom at least 3 licenses for students.
I do not have a campus store but this standalone license of lightroom would work? (the 4th) https://www.Adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_educati on_sl_popular.edu.html
-
Tecra 9100: No sound and unknown device
I have the laptop above and have recently flattened and reinstalled Windows XP pro. I have no sound, I have a speaker in my sys tray, Device Manager detects the card Intel (r) 82801 CA/Cam AC'97 Audio Controller, after I installed the RealTek AC 97 drivers. I plugged in the headphones to make sure that this is not not the speakers who have blown. But still no sound. All volumes are turned upward and the volume on the front wheel is set in the middle. In sounds and audio in the Control Panel, all volumes are increasing and the speakers are set to portable stereo speakers.
Any ideas?
I have a unknown devices in Device Manager States location is a system compatible ACPI Microsoft from what I see on Google it's something to do with the battery. Once again any ideas?
Thank you
I know that your laptop. It s a Tecra 9100 and this laptop supports a Yamaha YMF753 - stereo 16-bit Sound Blaster Pro compatible sound card.
The problem is the XP SP1 or SP2. The audio driver of Yamaha does not support SP1.
Seems that you need to update the audio driver.Please check this thread:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24622and
This Toshiba solution site:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000001b59 -
Need to install creative cloud does not seem to go beyond mgr app to 20% win 10 new photo shop office and executed proXi properly what should I do?
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and disable your firewall
-also clear the cache of your browser if you start with a fresh browser
-check the file hosts for blocked entries https://forums.adobe.com/thread/1912777
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.
https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html
http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html
-
I'm sorry, but I'm loud understand what happening to my master original RAW files, I keep offline on a RAID array and then what I do with my safe that, like all my photos modified? Sorry for this simple question, but would someone help please my lift the fog?
Thank you
Rob
One of the major downfalls of Aperture is that it shows you where are your pictures. They always favored it as a feature (even as a ' new paradigm'), but it's not so wonderful when you need to do something about Apple never intended. Then, it sounds really like it led to you not knowing where your files or files that correspond to which elements of the UI opening. I suggest that you need to nail for yourself - images from Aperture to right click and choose Show in Finder, until you know where everything is.
Otherwise, make sure you have plenty of available disk space, stop asking questions and just see what happens when you run plugin import LR with the options I suggested. It won't damage the opening.
-
Is not in fact not play, but he buffs like 5 seconds, then it stops and it starts playing disordered, at the same time, the sound will disappear. Thank you for your response. PS There occur also in VLC media player and I'm having a problem for my online game, I think that the video card is having a problem.
Well, I fixed it already I only check catches of cables and tighten them upward, perhaps that they release. Thank you also. :)
-
MacPro 2009 suddenly lost sound and the start-up time is more than a minute
Hi just a couple of days my MacPro in early 2009 has started to take well over a minute to start when she used to take less than 30 seconds.
Around the same time, I lost the sound of my Analog Audio Line out port. (Don't know if there is any connection.)
I can still use my head set for its ok when plugged into a USB port.
When I go to the sound pane there is no visible line output port. I have a Boise radio connected to the line port, having the sound transmitted by the intermediary for the auxiliary voltage on the radio. It has been working well for many years.
I tried to plug into a spare set of powered speakers, the choice of output Line Out appeared in the pane sound but still cannot get any sound from the speakers when I chose it.
The loss of the noise is a nuisance, but I can still use my head set.
It is the slow-start up that bothers me, although once it has finally started the computer works very well and reacts quickly.
Something has changed dramatically, and I feel that something happens and it doesn't bode well for me.
Hope someone can give me some good news and a difficulty.
Thank you
Try to open disk utility and repair the drive.
Also, consider posting a report of EtreCheck. This can help us to get to the bottom of your sound issue as well. http://etresoft.com/etrecheck
-
After reformat Windows XP, I lost sound and shows no sound card or drivers on computor.
Windows XP SP3 motherboard - ASUSTEC Computor Inc., model #Amberine M, On41411-version RE101Ambem000
Whenever you do a clean install of Windows XP, which is what I assume you mean "reformat Windows XP" - you must install the drivers for your hardware. In General, this would include drivers for at least the motherboard (chipset), the video card (if it is not built into the motherboard), the audio adapter (if not built into the motherboard), NIC (if not built into the motherboard) and external devices.
For XP, don't get the drivers from Windows Update. Find them in the site of the mfr of the computer (for computers brand) or concerned equipment manufacturers Web site. OEMs like HP, Dell, Lenovo and similar often have specific to their hardware drivers, so check with the computer manufacturer before going to other sites.
-
Dell Dimension 2400 with XP.
mjcandlec1,
Welcome to the forums. Firstly (and this is just my personal opinion) you can actually have a bit more large partition for the operating system. Just to receive the updates and service packs and other.This article will show you how to change the default location of My Documents. Also when you install programs then ensure you that you change the default installation directory, it will try to go on the C: drive.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Help to understand a warning in disk utility
Hi - I run regularly "verify disk permissions" because it was recommended to me. Today I came with a message that I've never seen before, and I hope someone can help me understand what it means and if I need to do something. It reads: WARNING: SUID
-
Please can someone tell me where to find the latest BIOS for a Toshiba Portege M400. I looked on the Toshiba site, and everything is there for Portege is the M750 and M800.Thanks in advance,Joel
-
HP ELITEBOOK FOLIO 9480M: Additional SSD for BOOT HP EliteBook Folio 9480 m
Hello all, I need to know what are the possible ssd m2 which can be mounted on the hp elitebook Folio 9480 m and especially if it can be used as a boot diskThank you very much
-
Unable to access user profile after the point of recovery to restore a previous
On portable computer Satellite internet access via wireless 10mn very slow at startup, sometimes. Suspicious application recently installed making early access before system ready then decided to restore. After recovery in safe mode error messages [w
-
ITunes will not install.
When I try and install ITunes I get a message saying a program in the windows package install could not executed. I tried all the suggestions in the nets, but nothing works. You have any other suggestions? Thank you. Phil