Tecra A2 - striped screen of the chassis

Similar Questions

• Tecra 8100: vertical stripes on the screen

  I just bought a second hand Tecra 8100, who has been stripped of all its programs, OS. So I installed Windows98SE on this - now I get a screen with vertical stripes, which perch in the middle of the screen of the laptop with Windows just about visible in the background.

  I went to the display driver Toshiba and downloaded Web pages relevant windows 98se. Once on my laptop, the exe file does nothing; is neither their "graphics card" option in my device manager - everyone has ideas as to what is happening?

  Hello

  Please connect external monitor to your laptop and check if the result is the same. If so, there is probably a problem with the graphics card. If this isn't the case, I presume your laptop LCD screen is defective.

• Tecra 9100 blue screen when you disconnect the power supply

  Hi people,

  Im having a major problem, Ive had a major problem with my tecra 9100, when I unplug the power cable and try to use the laptop on battery, the blue screen comes up saying NMI: channel check / IOCHK

  then the computer shuts down, it restarts only properley if I plugged power of ext,
  also something to note, when I unplug everything first, he's not str8, its only when I try to use the laptop, which is pressing a key

  If someone knows something about this could you please let me know

  Thanks carl

  Hello

  This has been already discussed here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13784

  Check the sanremo poster, which refers to the knowledge base article Microsoft!

• Tecra A2: Automatic change of the resolution of the screen

  I use a Tecra A2 with an external 17 '' TFT Phillips, connected via the Toshiba docking station.

  TFT works best with a resolution of 1280 x 1024 - 1024 x 768 only supports the computer screen. I spent a lot of time, try to configure the integrated Intel 82852/82855 GM/GME Graphics Controller to automatically select the external screen when connected, otherwise use the screen of the laptop. I can get both use the same resolution (1024 x 768), but makes the screen external look terrible!

  This feature was present in my Sat Pro 6000 - but now that I have moved upward at a Tecra, I seem to have lost it?

  Any help would be greatly appreciated.

  Hello

  AFAIK the Tecra A2 takes care of max 1024 x 768 resolutions and it s not possible to increase it. Well, you said that your screen looks terrible with 1024 px external.
  I guess that the display looks like fuzzy. It of normal because the standard resolution for this monitor is 1280 x 1024.
  Well, unfortunately you have to use this resolution if you want to have a clear display resolution.

• Tecra M2: vertical stripes on the screen!

  I have a laptop Tecra M2, which (to this day) starts with a display of colorful vertical stripes that gradually change color and width over time - trippy!
  The laptop is password protected, and I can always connect (although can't see what I'm doing).

  So it seems to be a screen rather than a computer problem or a software problem. Any ideas how I can get rid of the scratches?
  Or I am looking to buy a new screen to the laptop?
  See you soon.

  Hello

  Have you tried to connect the external display of notebook o? Not?
  Do it and check if scratches appear on the external monitor.
  If the lines do not appear on the second monitor, the screen of the laptop or one piece is malfunctioning. But it must be a graphics card problem.

  But if scratches appear on the second monitor there must be a card problem.
  However, it seems that it s a hardware problem and you will need to ask a technician for assistance because I put t think you will be able to fix it yourself

• Tecra 8000: W2K - how to operate the 2 screens at the same time

  I have a tecra 8000 with win 2000 pro is installed.

  Everything works fine with one exception...
  Press the [fn] [f5] keys to use the device outside.

  Is there a way I can get it to run 2 screens at the same time (either cloned or, preferably tv being a secondary monitor)?

  If anyone can help I would be eternally grateful

  Thank you

  I'm not familiar with the Tecra 8000 and W2K operating system. If there I sno good driver on Toshiba download page (I assume W2K is not supported for this model of laptop), please try to find the driver somewhere on the net. I found some info your unit has NeoMagic NM2200 (MagicMedia 256av) video card.

  To use an external monitor as a second monitor, or extended display just try to use the Windows settings in display properties.

• Replacing the screen on the Tecra A10

  Ladies and gentlemen

  Please someone know how to get to a screen on above laptop. I don't see how to get the palmrest and screen separated from the motherboard, but how I get to the screen to replace it, I cannot say.
  Your
  Ian

  You need to take off the mask LCD joints and remove the 2 screws (one on the left) and one on the right side. After making the cover of this separate the LCD and cover entire while releasing the latches. Ribbon of glass must be removed.
  Unplug the LCD beam and HV operate via the connectors on both sides of the FL inverter and remove FL inverter.
  Remove the glass ribbon and unplug the beam of the LCD screen of the LCD unit connector.
  In the end, you must remove 4 screws and LCD screen.

  It is quite complicated so do gently to avoid damage.

• Tecra 8200: Question about replacing the 14.1 screen

  Hi, my screen shows that the left side, a line falls down in the middle and the right side is empty. I have the external monitor firmly on the upper left side, the entire screen lights up as usual. I've attached a screen remote and it works fine. I said that it is a defect in the screen.
  The part of the screen is LTM14C438, they are very expensive. Can I get a number of different screen (LTM14C433), which is a toshiba 20 a TE2000 pins, and I like that it will work.

  No matter which confirm this, thank you, Allan

  Hello

  The fact is that the screen and the motherboard are the most expensive parts of the laptop. I put t know if you can use a different laptop screen, but I guess that it s is not possible. You must always use compatible parts and supported and devices.
  You can try to contact Toshiba and you can try to ask the opinion but I think that it will recommend to use original Toshiba parts.

• Tecra A10 - 1LL - connection with the external monitor

  Hello

  I have a problem with my laptop Tecra A10.

  When I connect to an external monitor to the laptop I have to manually switch the screens because external shows nothing. When I disconnect the monitor I have to pass the screens manually with FN + F5 because the internal display shows nothing.

  My old laptop (Tecra A9 (PTS52E-0E702NGR)) is the poster automatically whenever I connected or disconnected an external monitor.

  Anyone has an idea why the A10 light automatically as the old notebook? Maybe it's the only spot in the preferences of the display driver that I don't see right now. :-)

  Hi SilverWizard,

  What happens if you try to switch on the external monitor using the options of display driver, or that this combination of buttons don t work?

  As wrote Al - eX you must update tools from Toshiba to get the keys FN working again. Everything can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  It's working now?

• Tecra S1 - black screen even on external monitor

  Hello

  I'm not sure if this is the right thread for this, but here goes: I have a tecra s1 who was working fine then one day. I turned it on all I get a black screen. I suspect that it's the hard drive but not 100%.

  I tried to connect to an external monitor as the same just a black screen. My question is this laptop does not start if the hard drive is bad I think it would be at least got to the bios screen, but I get nothing but a black screen.

  any help would be appreciated thanks.

  Hi cracypcguy,

  For me, this looks like a hardware malfunction if on an external monitor, you can see a white screen also. In addition, I doubt it has something to do with the HARD drive. In this case you should see the screen of the BIOS at least.

  Anyway, in your case, I'll ask a maintainer approved assistance. Technicians can check your laptop parts and the exchange of defective material.

  I hope I could help you! :)

• My Tecra A9 TFT screen is bluish

  Hello

  I find my Tecra A9 a little bluish TFT screen... Most of the colors are a shade of ILO, including the reds.

  I wonder if this is a feature of the poster of the Tecra A9 or there is a problem with mine... I read some reviews, but none is talking.

  Thank you

  Pedro Duarte

  Me be thick or not, but when you say TFT you hear an external TFT monitor or the current screen on the laptop. If the screen on the lapto is and he just started to happen, then I think it's maybe a hardware problem, best way to try is to connect an external monitor and see what you get on this. Press FN + F5 to change the display device by the way. The only other thing I can think is some kind of framework in display properties, to verify this, right-click on your desktop and then click Properties. I check here, for anything that can suggest a kind of theme blue at all.

  I hope this helps.

  Chuck

• Tecra M10 - light screen problems

  Hi guys,.

  at first I m sorry for my English is not perfect.

  That is the problem.

  When I created the brightness on my screen on max, everything is OK.
  But when I put it down to minimum, after awhile the diodes (or bulbs) stop working.

  I think there are 4 LEDs in the screen for two more left to stop work.
  When I created the brightness to max once again, after a while these left diodes begin to work again and everything seems fine.

  I thought that I would like to reinstall the display driver, but when I download and run the Setup.exe it says that my pc does not meet the requirements for the installation of this software and I have no idea why.

  Any idea what should I do?

  Thanks for your advice.

  Lucien

  PS: I have Tecra M10. C2D, Nvidia Quadro NVS 150

  > When I created the brightness to max once again, after a while these left diodes begin to work again and everything seems fine.

  Don t think its problem of diodes generally the FL inverter controls the brightness of the screen.
  The fl inverter is a small part that is placed behind the frame of the screen.

  I would say that this part needs to be replaced, but of course this is only my personal opinion and I recommend you ask a technician for a control before changing anything.

• Re: Crash on Tecra M3 of screen

  This morning my Tecra M3 green screen LCD turned and then slowly disappeared in a cloudy cloud.
  When I restarted I had a large screen with red and white rays online and weird graphics.

  Windows XP logo comes up but is covered with white lines vertical white followed by many bosses of white stripes horizontal but then the OS is not kick in and I end up with a white screen.

  Maybe 5 minutes later I hear the theme of Windows but still no office - nothing.
  I don't see/hear the spinning of the HD.

  I tried to boot mode safe, where I always get red and white patterns, but I can make the text to start safe mode.
  I have recently re-installed XP of the original system DVD (version 2006 - I think) and everything seemed ok so far.

  I have a load of work to go for HELP!
  Is is ok to continue working normally in Safe Mode - it is possible to connect in this mode?

  Help!

  Safe mode is option that offers access in the operating system preinstalled if there is a problem and that you cannot use it in normal mode. In safe mode OS will be loaded with a minimum configuration and without important driver. It is not the solution for you.

  If I understand you, now you have the own operating system preinstalled. Try to start as usual and see what happens. I fear you have serious hardware problem and there is not a lot that you can do everything alone. Is the defective LCD screen or the graphics card does not work properly. What you can do is to test it with the external monitor. If these lines will be displayed again it is certainly because of the faulty graphics card.

  In any case, contact service and see what they can do for you.

• Tecra M4-sale points on the LCD

  I recently bought the tecra m4 tablet pc and recently I found something like points Sales appeared on my screen. It's as if the screen protecting the cover was dirty. It shows in every program and at the same place. It feel / looks like scratch and not burnt pixels (you can see what is underneath if you look on the side), looks just like the dirt from the inside!
  I tried to clean the screen with special cleaning fluid, but it did nothing.

  What can I do to remove it, it is very annoying.

  Hello

  Are you sure it's dirt?
  For me, this looks like a dead pixel.
  See this forum on a dead pixel.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=10662&MessageID=38179#38179

• Tecra S2 cannot switch to the external display

  With my Tecra S2 and when it is docked in the Port Replicator APR - III, I used to be able to connect my external (via DVI) display so that it was to automatically screen output to we by default, not only to the windows startup screen (Yes, I noticed the topic on the forum at the start of windows) but also when display login screen and beyond.

  Only problem now is that there is no more than anything, she now only sends the output to the external display when starting and then switches back to the computer screen displaying the screen Windows login and when you are connected to Windows.
  Also after commissioning and connection, FN + F5 does not at all, even when you switch to DVI, display does not illuminate.

  I feel that either the nVidia properties settings (double screen, unique, etc.) or the Mobile Extension Manager have something to do with it.
  Anyone who knows the answer / solution to this problem?
  Experts on the Mobile Extension Manager or several monitor in nVidia settings with of Toshiba Tecra?

  Thank you

  Arjen

  Hello

  Well, as I know it is not possible to set the external monitor as a default monitor.
  I use a Satellite phone and sometimes I plug it into the external monitor and use the extended desktop option.
  During notebook startup procedure the windows boot image will appear on the second screen, but the user name and the operating system appears on the screen of the laptop.
  I think you can use the external monitor but you can't set it as a default monitor and you can use it if the operating system has been released.