Tecra A3-184: enter hibernation mode Setup?

Similar Questions

• Tecra R840 - Win8 - energy hibernation mode

  Hello

  I did the upgrade offered to W8, I am very satisfied with the W8 system, but the problem is that the laptop consumes battery also in hibernation mode.

  I wouldn't understand that energy consumption will be in mode 'sleep', but on the hibernation mode?

  I discovered that when the computer is in sleep or Hibernate, and I opened the lid, the computer automatically starts EVEN if the 'power computer when open cover' option is unchecked.

  When I select to shut down the computer - it does not react to open the lid, I have to press the power button.

  The problem may come from the windows system, that BONE tolds the computer wake up once the lid closed.

  The problem is, the computer starts to load whenever I wake up after hibernation (I had my 15 minutes of the Home Office, and it consumes about 1 to 2% of battery.

  It is quite annoying that my battery capacity full load is about 83% of the original (I bought my PC in June2012).

  I got Lenovo T60 7 years ago, and there was an option to start to charge the battery only when the battery charge was less than 95% and it saves the battery capacity.

  Does anyone has some clues?

  Thank you!

  Fact is that the battery capacity will decrease even if the laptop is turned OFF completely. Capacity of the battery will lose some percent of capacity. To reduce this review - http://aps2.toshiba-tro.de/kb0/FAQ9C015N0001R01.htm
  A useful document for you can also be http://aps2.toshiba-tro.de/kb0/HTD9401AZ0001R01.htm

  > I Lenovo T60 7 years ago, and there was an option to start to charge the battery only when the battery charge was less than 95% and it saves the battery capacity.
  As far as I know that this option is not available on Toshiba laptops. When it is connected to AC notebook power supply starts to load the battery automatically.
  There is no possibility to change anything.

• sleep patterns that my computer cannot enter hibernation mode after accidentally deleted my hibernation files

  original title: modes of sleep

  About three weeks ago, I did a disc clean up and accidentally deleted my files of hibernation. now my computer can't get hibernation mode, how can I fix it.

  I can't see any link please send again

  http://support.Microsoft.com/kb/928897

  "I used the disk cleanup tool in Windows Vista, and now the hybrid sleep feature and the hibernation feature are unavailable"

  Read the above info.

  See you soon.

  Mick Murphy - Microsoft partner

• Re: Satellite Pro M30: cannot enter hibernation mode or standby

  I have a Satellite Pro model M-30 # PSM35E-000NU AR recently the hard drive crashed and I installed a new 80 GB replacement.
  Now I can not access the 'characteristics of hibernation or standby.
  In addition, shortcut keys are inop.

  When I go to programs, utilities Toshiba the only option available is SD memory card format.
  I can't access the link of "accessibility". and I can't access the configuration of H.W Toshiba.

  Can anyone help me with any of them?

  Hello

  For me, it looks like you don't have Toshiba drivers all installed and necessary.
  Have you used the Toshiba recovery disc after the HARD drive has been replaced or have you installed the Windows XP using a clean CD Microsoft?

  Please note that the common Module are very important!
  You must install this software first!
  The Toshiba Power Saver help you to enable Hibernate mode and also to access standby mode!

  On the Toshiba European pilot page you will find all necessary drivers and you'll also find installation instructions.
  Follow m this and I sure will get you everything works again!

• Tecra M2: Traveling around in hibernation mode?

  Dear Sir.

  I use my tecra m2 for medical purposes for most, I'm patient and each time I have to open and close windows: one thing a lot of time: is it possible to travel in a hibernation and is it safe for the HD?
  Or it is better each time to stop?

  Thanks in advance

  Hello

  To save energy, the laptops can go into hibernation mode, preserving the autonomy and your work. Hibernation is a great feature that is often sadly ignored despite its great benefits. It's like the Stand By mode where you save the battery, but instead simply to enter a low power state, the computer is actually off. Everything in memory is saved, however, so that when the computer is turned on again, it's like you never left.

  Remember that it is advisable to restart the unit from time to time. ;)

• Tecra S10 - 11W: WXP SP3 stuck while entering sleep mode

  Hello people,

  I bought me a Tecra cos it came with a version of windows XP.
  Next to the strange effect once launched, it consumes about 800 MB, instead of the usual 300 MB, the system suspend frequently ends up in a kind of State of transition.

  I checked the definition wol bios, I changed it to disabled. (still wondering why it has been activated by default on a laptop)

  I went through all the 174 updates per DMS.
  There is still no improvement.

  For the most part, the sequence is like this:
  -cold start
  -to suspend by powermanager in 15 minutes unattended
  -wake me
  -to suspend by my
  -wake me
  -suspend again and display the message: "Please wait, windows is now ready...» "infinitely

  Well well... until the battery is discharged or I pulled the plug

  Ah. Do not get to an answer from HP as: "this is the first time we have ever heard of."
  I have two other Tecra. running latest version of XP all had the same bad habit.
  Moreover, using hibernate generates the same result.

  Hope one of you can help out me.
  Thanks in advance
  Max

  Hello Maxtor

  As you can see, this is the forum user and there is no answer HP or Toshiba.
  We are here to discuss about the issues described. If you wish to discuss with the Toshiba people that you're on the wrong place here.

  Return to describes the problem: I've heard of these issues, but it is not specific for certain model of laptop. You must understand that your configuration of the laptop and pre-installed software does not for us and it is not easy to say what may be responsible for this.

  Until we start to discuss, I would like to know if you have noticed that the same with factory preinstalled operating system. With own OS preinstalled, there are no software updates or anything else that can run in the background and blocks suspension mode.

  Have you tried to put an end to some of the laptop before running process comes into hibernation mode to see if that will help?

• A satellite series will not automatically enter hibernation/standby mode

  This feature to work on my laptop, but at the time (maybe 6 months), he started this problem. I don't remember any significant incident they coincide at the beginning of this problem. The computer will enter either of these modes and works fine if I manually turn them, but I can't put it so that they enter these modes automatically after a period of time. I tried to change controls for both the Toshiba utility and Panel options screensaver standard windows, but neither worked for a while. Any ideas?

  An application may be preventing the laptop to enter the Hibernate?

  I remember that PowerDVD did this on my laptop, so close all applications you can, then try again.

  If you have no luck, you may need to run the recovery to reinstall Windows.

  Also try a BIOS update.

• My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ============================================

  After the foregoing: a Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Vista will not wake up out of the hibernation mode, reboot

  Running Vista Home Premium with Service Pack 2... computer goes into hibernation mode after some time and he doesn't wake up.  It is used to show me the office, or that has never been open for a second, then return empty.  I used to be able to hit CTRL Alt Delete, then cancel and everything would be fine.  Now, I have to hard reboot.  I can force the issue with Ctrl alt del and then by selecting Hibernate.   It very well when I force the sleep.

  No error codes, etc.

  Help!

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  A Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Cannot enter Sleep Mode after undating for win7 / new BIOS

  Model: dv4 1435dx

  problem: cannot enter the mode 'sleep', when close the lids or click on 'sleep' without closing the lid, computer, enter the mode 'sleep' but immediately wake automatically. but it will not occur if the computer in mode sleep automatically

  So, don't know where the problem occurs, the first time I got Windows 7 update kit. It automatically update the BIOS of F43 to F44. then install windows 7. I don't remember if this problem occurred at this time. seems not at first, but after 1/2 weeks later

  can I update the BIOS to F61. problem still exist. then F65A. problem still exist.

  all other things are fine. No reset automatically. Hibernation is very good.

  So, I don't know if this is a bug in the latest version of the BIOS.

  In addition, update the driver from HP protect smart update of the window (I installed the driver from the website of HP, but windows update say there is a better driver)

  I wonder if it will be a problem too.

  Help, please. without "standby" mode, it is not good at all

  Oh, well, it's kinda stupid to answer the question myself...

  But I can't find the solution

  These guys have the same problem with me

  Just to go the device management, and then right click your mouse wireless, cancel the 'allow this device to wake your computer'... then problem solved.

  : bravohelen:

• Updated 2011 MacBook Pro at El Capitan 10.11.4. At the opening of the Photos, he entered into mode 'Library Preparation', but was stuck at 50% complete for more than 30 minutes. What should I do?

  Updated 2011 MacBook Pro at El Capitan 10.11.4. At the opening of the Photos, he entered into mode 'Library Preparation', but was stuck at 50% complete for more than 30 minutes. What should I do?

  Give it time - it may take a few hours depending on the size of your library is

  LN

• Satellite P100 will not stay in hibernation mode

  Hi everyone ~.

  Satellite P100
  Vista

  Before going to bed, in that I always put my computer in hibernation. He won't stay in hibernation mode. I don't know fashion 'sleep' here.
  I click on the Start button and then choose put into hibernation. It goes into hibernation and I go to bed, so I don't know when it will come out of hibernation.

  I used to have to press the power button, get up and running after his hibernation. Along the front of the computer are 5 blue lights. I'll call them a, b, c, d and e.

  d & e are usually off when I use the computer.

  a, b, and c are on when I'm on the computer. When it goes into hibernation mode b turns off.

  When I get up in the morning a, b and c are all back on and everything that I have to do is move my mouse around then newspaper instead of the first press of the power button.
  I have a few scheduled tasks, but I've always had people.

  Help, please. Is there a setting that I can do to take care of this problem? TIA

  Hello

  Have you noticed the same thing with the mode sleep too?

  Anyway, check it please Windows Update option and disable it. Click the settings (left) and make sure that the first option install updated is automatically disabled. Maybe your laptop starts each day at a time and try to do the update of audit.

  Test it!

• NB100: battery discharges in hibernation mode

  Now that my hibernation function works OK, I used most of the time, I let the netbook.
  So it is faster to recover after hibernation that restart.

  But I notice that landfill of battery substantially; It is usually on the critical alarm level after some 12 hours of "hibernation".
  Is this normal?

  The device is new and so is also the battery. He holds for about 3 hours in normal use.

  Hello

  Usually the battery needed to dump also if the laptop would it boot mode (simply DISABLED). I read as the options enabled like Wake up on LAN, etc. needs a small part of the battery power even if the laptop is not enabled. Could the battery loses power during a night between 10% and 15%.
  If the laptop is in hibernation mode the battery could lose more than 15%.

  However, I think that you should check the BIOS settings and should disable options like Wake up LAN, etc.

  Welcome them

• Satellite X 200-20 years do not go into hibernation mode when the battery is 2%

  Hi all

  I just received my X 200 brand-new and very shiney and went through the normal procedures of change in VISTA power management settings, but I can't seem to enter the State of hibernation automatically. I have it configured such as a battery alarm critical (to 2%), the laptop should automatically enter Hibernation State save my data and downtime.

  Unfortunately, this does not happen and he died right after that the battery level has dropped below the 2% limit. On re - boot (with power supply) VITSA tells me it has not been closed correctly. You don't say! :-)

  I have configured laptops before using XP and have not had any problems. I know that VISTA it has many more options to set up and wonder if I'm missing something. I checked the help files for the VISTA and I seem to do the right thing.

  I really would prefer to use Hibernate instead of sleep, but simply can't get to do on a critical battery level.

  Does anyone have any ideas or suggestions?

  Thanks in advance

  Hmm normally, it should be possible to set Vista power options to hibernate if the battery reaches a critical level.
  I think you should try to reconfigure the settings.

  Check the hibernation of different battery level. For example, you can set the level of hibernation at 10%. Please don t forget to apply settings ;)

  By the way; I recommend to check the BIOS settings too.

• Satellite T135 how to enter Safe Mode and HDD Recovery if 'F8' does not work

  Hello everyone

  I have a laptop Toshiba Satellite T135 and it crashed recently. Since then, whenever I turn it on, startup repair is enabled automatically. But it does not fix the error.
  I tried to solve the problem with the system restore, but that no longer works. So I think I have to go through the procedure of HARD drive recovery.

  The problem is that I have a lot of data on my laptop that I must first of all safe. I wanted to do it via Safe Mode that supposedly, I should be able to enter by pressing "F8" at initialization, when the Windows logo appears. But my laptop is not responding when I press F8, but rather getting a sound alert, if I press the button for a long time.

  Apart from how to enter safe mode by pressing F8 during initialization does not work, I have a second question: Toshiba Recovery Wizard is the equivalent for the HDD recovery procedure? It is the only similar option that I could find...

  Thank you very much for your advice.

  Hello

  The recovery of HARD drive installs the image of Toshiba.
  The image is the package that contains the operating system, drivers and all the tools that have been installed on the first day of purchase; simply said; using HARD drive recovery you would set the laptop back to factory settings.

  You want to save the date before you install the operating system once more?
  Well, remove the HARD drive, put this in a USB HDD enclosure and move the file to the HARD drive to another computer.
  It would be the best way to get the file save.