Tecra A3x: Is the IrDA Port available?

Hi can someone confirm whether or not the Tecra A3x (PTA3XE-01D00NEN) has to a port infra-red or not.

Thanks Jason

Hello

No, the IrDA port is not available on the Tecra A3X

concerning

Tags: Toshiba

Similar Questions

  • Qosmio G20 - 141: is the IrDA port available

    I try to use my MCE RC on my forehead IR but not good
    is there one or not?
    I cheked my manual, it shows that theree is an and that I can use the RC on it!

    Hello

    I found the specs port IrDA is not available.

    Good bye

  • Qosmio F20-154: Re-activating the IrDA port

    Hi, some time ago I disabled the ir on my qosmio F20-154 port, as I saw no need.

    Now half a year later, I've forgotten how to get it (for a new laptop).
    I see very little in the manual wonder, if I need to use the remote control receiver?

    Concerning
    Hans

    Hello

    You forgot how to activate the IrDA? ;)
    As far as I know the IrDA port is not available on this device.

    Check Device Manager if there is no IrDA devices appears.
    I think that you will find nothing, because there is no such thing as the IrDA port.

    Of course, it is possible that you received an IrDA device for the use of the remote control, but you cannot use it to transfer files.

  • Satellite 4100XCDT: how the IRDA port works under DOS

    I have a Toshiba Satellite 4100xcdt. How do I assign a COM port to the IRDA (infrared) port in the BACK so I can use programs such as Winsamp
    http://www.veg.Nildram.co.UK/remote.htm

    The BIOS assigns COM1 and COM2 serial port to the built-in modem. However there is not a single option for the IRDA port not found.

    How can I make the IRDA port works under DOS?

    In my opinion it of not possible to use the IrDA DOS, because drivers must be installed and initialized.
    The IrDA port driver is a common Windows driver and the irda connection works only when windows was loaded

  • Satellite A60-124: using the IrDA port to transfer the data to the mobile phone

    Hi, I want to Exchange data between a phone mobile SonyEricsson and my laptop A60 - 124 via an IrDA port. I activated the infrared sensor in the phone but the laptop does not detect anything.

    The device setting menu shows my port Irda ok and seems to be enabled. What should I do?

    I m not 100% sure but I think on some portable computers, you can enable and disable the IrDA port in the BIOS. Check to be sure.

    In the control panel in the IrDA option, you can choose the place where the incoming files must be saved. So if the IrDA connection has been activated on your mobile phone it should work.
    Remember that the mobile phone IrDA window is in the right position.

  • Satellite A100: How to use the IrDA port with cell phone?

    I have a laptop with an infrared port that I can use with another computer.
    Now, I have a problem with my laptop at home, A100 series.
    I downloaded Nokia PCsuite software from the Nokia site, but it can not connect to my phone.
    If I put the phone to transmit IR, always the pc does not regognice the phone anyway even if the phone is located near the infrared port of the PC.

    I updated my bios, tried to take the infrared port, used as a port standard com etc. Nothing works.
    What should I do to get the infrared port of the function and write down automatically if I bring about my mobile with IR?

    Thank you
    Petri

    Don't be angry with me because I ask, but are you sure that your laptop supports the IrDA?
    What cell phone do you have exactly? Satellite A100-xxx

    IrDA option appears in the control panel?

  • Cannot connect to my Satellite M30-106 of the mobile phone using the IrDA port

    Hello

    I'm trying to connect my phone to my laptop via the infrared port, but the phone tells me it cannot detect all devices when I put it right next to the port of FIR. Some how do I need to activate it first? The device manager says that the device works, but how to check?
    I've never used this facility before on this pc. Can anyone help?

    I googled for your model type and it has an infrared port for sure.

    Maybe you should remove from Device Manager and then do a restart, so can reinstall windows? That might help, but I Don t know if he would.

    See you soon

  • Tecra A3x hangs at "Setup starts windows" during the XP installation

    Hi again
    I posted another thread on this laptop. This question was cured by adjusting the correct CPU.

    So, now everything seems fine. Everything seems to work except very well.
    During the installation of XP, the drivers all will charge them and then we get the text 'Setup starts windows' the lower left of the screen.
    It does not further, just sitting there.

    I googled this problem and read many old threads on the subject, I went to the Microsoft website too.
    So far I tried (on the basis of these old threads)

    Different installation discs
    Different memory
    Disable (in bios) that anything not reqd such as Lan
    Reset the default bios settings
    You press F5 when invited to press F6 for scsi drivers. From there, I tried different setting options.

    The current bios is 1.30, I understand there is a update available for 1.4 but it is a basic installation Win rather than back may be done without THAT installed XP.

    Suggestions for what the problem maybe?

    Hello

    What version of Win XP you try? Win XP contains the SP3?
    Please include to the Win XP SP3 using a tool called nLite and then try to reinstall Win XP.

    AFAIK the Tecra A3x support a common IDE HDD so no driver RAID or SATA is necessary.

    You can also check the HDD of the Tecra.
    Use the tool called Drive Fitness Test to test the HARD drive

    Good luck

  • Satellite A100: To receive data can I use the remote port IrDA?

    Hello

    I have an A100 which has infrared, which is used for the remote control supplied with the laptop. I was wondering if this infrared receiver can be used for other devices (e.g.: mobile phone) other than the remote control.

    I checked the control panel and Device Manager and both have no infrared information, but I thought that it would be always necessary even for the remote control.

    Help, please.

    Thank you.

    Hello

    I think that it s not possible to use the IrDA remote control window to receive files or data.
    I wonder how it should work if you don t have IrDA options in Control Panel.

    If this option is not available in the Control Panel, you cannot activate the IrDA and you can't assign a download or download the IrDA connection. So in my opinion you can't use it as a connection port.

    Unfortunately ;(

    But I found external solutions. If you want to use the IrDA, you can buy a USB IrDA key. I didn't test this device, but other people on the net have used it and it works.

  • How to change the infrared port on Satellite M30 to be IrDA to be direct IR?

    Hello world

    I just bought a new watch that should be able to communicate with a pc via the infrared port (it's the Polar S710).
    Unfortunately, it does not work as the 'Protocol' of the watch is directIR, rather than be IrDA, as is my cell phone.

    I saw somewhere that it would be possible to change the infrared port of my laptop in order to operate in directIR. Anyone know the procedure? I think I could change something directly in the driver, but I did not how to deal with.

    I would be very grateful if someone could help me.

    Thank you
    SEB

    Hello

    I think that it of not possible to change the IrDA Protocol on the laptop.
    But have you tried to update the software polar?
    Consult the manufacturing site:
    http://support.polar.fi/PKBSupport.nsf/library?OpenForm

    If this does not help I think that only and an external solution as USB-> DirectIR dongle help

  • Tecra A3X - how to remove the BIOS password?

    Hello

    I have a Tecra A3x who died before Christmas. I bought a motherboard replacement on eBay. I mounted the motherboard and the powers of the Unit well stop but to a password screen that is black. I tried to find a way to wipe the BIOS and have removed the CMOS battery for about 10 minutes. I read that most laptops have a jumper built in too fix. I've looked in the usual places - memory modules etc. I can t find it anywhere.

    Any help would be very welcome.

    Thank you
    John

    Hello John

    As you probably know BIOS password is very important security feature and remove the BIOS password can be described on the public forum of the manufacturer s. It is a kind of top secret information.
    It is not logical to do this, right?

    Each Tecra A3X stolen with BIOS password could be unlocked.
    In my opinion, you should contact the person who sells you this motherboard and request password. If he cannot stop, return. At this info in the description of the product on its offer to ebay?

  • Tecra A4 and the docking station Port Replicator III

    HI, I would buy a Tecra A4 with the staition of home, but I see that the docking POrt Replicator III has no s-video, bur the pc Yes. Anyone knows if I can use the s-video on the oc when I put the pc on dockin station?

    Hello

    Sorry, but it is not possible. You can only use the S-video port on the device directly.

    Good bye

  • Tecra M9 longer works with the Advanced Port Replicator III

    Hello

    I have the Advanced Port Replicator III Plus (PA3474E-1PRP), and it works very well with my M5 (M3 and M200). For example I connect my laptop through it to my monitor/mouse/keyboard/external DVD/hard drives, sound, webcam etc...

    Now, I'm to assess what should I buy as my next laptop and the M9 (PTM91E-03000MEN) seems good.

    Question: * the M9 will work with my plu III advanced port replicator? *

    Otherwise, * y at - it another docking station option that will allow me to connect a M5 and an M9 * please? (of course not at the same time).

    If there is no solution that allows a single docking station for the M5 and M9, then I might as well choose a laptop from another supplier... Main reason to stick to Toshiba all these years is the docking station compatibility that I move older models to the newest...

    All thoughts welcome...

    See you soon
    Daniel
    --

    Tecra M9 and Tecra M5 do not have the same docking connector.
    This means Tecra M5 is the APR III +, Tecra M9 has Express Port Replicator.
    You need the correct docker for each system.

    May it is a solution to be able to use the Toshiba Dynadock. It's USB based:
    http://www.dynadock.com

  • Tecra A3X: How to run the recovery CD

    Hello

    Can someone please help? I want to do a full restore on my tecra A3x, but when I start and you press F12 as I am told in my book, nothing happens, how do I do a cover of product. I did everything the manual tells me to do, so not obvious answers please. Thank you

    Hello

    By pressing the F12 key immediately! After that laptop startup should allow a start menu.
    Then you should be able to choose between different devices like ODD, drive HARD, LAN, etc.

    Alternatively, you can try to press the C button allow booting from the CD/DVD drive.

    Last but not least, you can change the boot order in the BIOS.
    But don t forget to save the settings after changing in BIOS!

    PS: in all cases the CD must be interested before indicating the laptop

  • Latest version of the BIOS necessary for a Tecra A3X

    Hello
    I have a Tecra A3X (number of product PTA3XE-00NUB4) and I'm looking for the latest bios update.

    On-site support world-wide, there are updates to v2.70 revision v1.4 (for series S2/A3: ts2_a3v27.exe), but when I try to use it it complains about unsupported hardware and that it does not level (I tried the direct upgrade from WinXP and cd burning methods).

    On the french support site there is only a revision 1.4, which is the only one that has worked so far.

    My laptop was bought for the Luxembourg, is the A3X model a different device than mentioned on the support in the world?

    Thanks for any help...

    Hello

    Don t know which site you mean saying support in the world but the Tecra A3X site is without doubt a European model for laptop and you must use the page of European disk from Toshiba for the driver and BIOS download.

    I mean this page:
    http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

    There is only one a BIOS v1.40 - WINNER.
    So if you want to update the BIOS, you should use it.

    Concerning

Maybe you are looking for

  • I can't recover my address bar or settings/bookmarks, back button, refresh button, etc.

    I can't recover my address, bookmarks bar, back button, button refresh etc. that disappeared This has happened Each time Firefox opened is 2 months ago

  • Change the language of the menus and options in German to English

    Hello I have L40 Satellite Pro computer laptop which came with OEM installed Windows Vista Home Basic edition in German.But I need other options to be displayed in the English language and the menus. How this can be done? Thanks in advance,Kind regar

  • Conflict of flow of data on the front panel

    Hello My vi is almost done, but I still have a problem with the front panel. I think that there is data traffic conflicts in my vi. When you run my vi, you will see the pop-up window asking you to set a path of file, control devices, selection of dat

  • "Fan error" on T60

    So first of all, there is no dust and there is nothing to block the fan blades, so it should work fine. In addition, fan is tested outside the laptop on a different power source to make it work probably. But when I turn on the laptop the fan does not

  • Z5 display problem

    Sorry for my English... The screen has a backlight brighter in the Center area. Looks like a bright horizontal line, especially on white background. Most of the apps are very uncomfortable to use!