Tecra A4 does not light when you press the power button

Similar Questions

• PC does not start when you press the power button, after that starts automatically as a ghost!

  I have HP Pavilion a6030in, my pc does not start when I press the power button / stop ther, but she starts automatically after some time after that, it works fine.

  Even once when I closed and leave it for a while and still the problem is not resolved.

  Help, please

  I solved the problem

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Volume/brightness does not appear when you press the volume button on laptop keyboard

  Recently, when I went to change my volume, the small bar has not appeared on my screen, showing how much I was going to the top. Brightness bar did not show either and it's really annoying because I never know how it is until music strikes out. Any suggestions on how to fix it? I'm totally lost.

  Hello

  I apologize for the delay in responding. It seems that the user profile that you are using has gone corrupt. Try to create a new user profile and check if you have the same problems here as well.

  1. open user accounts by clicking on the button start the picture of the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.

  2. click on manage another account. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4. type the name you want to assign to the user account, click an account type, and then click on create an account.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  To fix the corrupted profile follow the steps mentioned in the article below.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Try using the tool (SFC.exe) System File Checker to check and repair corrupt system files.  To do this, follow these steps:
  How to run scan SFC

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all of the necessary files any replacement SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11 after the scan finished, close the command prompt window reboot the computer and check.

  For more information, see the link below.

  http://support.Microsoft.com/kb/936212

  Let us know if this helps

  Concerning
  Anthony.

• My cd-writer/DVD disc tray does not open when I press the Open button. He is not blocked and has no disk in it. How can I me t to operate?

  Cd-writer/DVD disc tray does not open when you press the Open button, or when you use the buttons to control the media on the keyboard. How can I restore it to its operating state?

  Hi John,.

  Please let me know exactly what happened when you tried my suggestions of first and second.

  Of your most recent post, looks like you're watching the wrong part of the Device Manager. Optical drive is listed under "readers of CD-ROM/DVD-ROM". The info you gave appear under "drives". If the drive is not listed under "readers of CD-ROM/DVD-ROM" or there is no such section in Device Manager, then Windows do not see. If windows can't see it then this means that there is no power or that the drive is broken.

  When you pushed the drive back in, the player no longer has much of the book or did you have to push all the way. If the latter, it means that the drive has no power or is broken.

  With respect to the opening of the case, I guess I should ask first if it's a laptop or desktop?

  Tricky

• PowerEdge T410 won't do anything when you press the power button / stop.

  My work has recently retired this t410 server. It worked without any problems when he was arrested. I had to remove and destroy the hard drives from the system. After that, I was allowed to bring home for my own use. I installed a new sata drive and plugged into the power supply and a free sata port on the motherboard. I get nothing when I tried to boot the system. This version has the unique power. Power light only lights up when you press the test button. System fan is going at full speed, but stops when you release the power button. Also on the control panel lights 1,2 and 4 and HDD power on and turn until the test button is released. There is a single green light lit on the motherboard, while it is plugged. Apart from that, I have no response when you press the main power button. Can anyone tell how to try to get it up and running again.

  -Who-

  I have not received the answers more so I think that this issue is ignored. So I'll let everyone know what finally happened. I solved my problem after a lot of electrical testing. I found a diagram of the arrangement of the power dell power supply pins and I made myself the best possible meter test. After several rounds of tests, I found several pins that did not have the right voltage. I bought a new power supply. I installed and replace everything. I plugged into the system and it auto fed on itself. I loaded from an OS and it works perfectly.

  Problem solved

• new tab does not appear when you press the button "open"

  A few days ago I suddenly can not open a new tab when you press the button open tab , press file-> open the tab, or Open the tab button next to a tab...

  Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• Touchpad on Satellite A200-1 body weight does not light when you tapoterez the top right

  Satellite A200-1 body weight.

  This has a double Synaptics touchpad mode that switches modes when you press on the upper right corner - at least he used to. Upgraded to Win7 and had to do a clean install as I had Vista Ultimate 32 bit version.
  Used the upgrade of Tosh package but the touchpad driver gave me the basic features, no double mode.

  Looked around and installed the driver of Luxpad V6.5 9.1.14 dated November 2, 2007. Played a little and everything came out to be almost normal, but the pad does not turn on & change the mode when I press on the upper right corner despite the checkbox for this being checked. It does turn on and work if I check the second option on the external mouse, etc..

  All ideas will be considered with gratitude that I tend not to use it. See you soon.

  Hi ple2011,

  Where did you downloaded Luxpad V6.5 driver? I can t find it on the Web from Toshiba site

  Is that on the Web from Toshiba site, you can download Alps Electric and Synaptics touchpad driver and you must install two drivers. You can download them here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Dashboard does not appear when you press the button on the dashboard

  I just got my board replaced on my MacBook Pro.  Before it was replaced, when I pressed the button with the dashboard icon (F4), it is toggled between my widgets that have been opened in the dashboard and the window, in that I was working.  Now, after you set up the Mission control to show the dashboard with the key to the dashboard, I see the dock (which I choose to hide) and all my apps icons.  I then have to click on the application of the dashboard to show my widgets.  How to reset the key so that it only shows the widgets when I press on it?

  Try going to system preferences > keyboard and check the box use F1, F2,... etc as Standard keys.

• Loop will not stop when you press the stop button

  Hello

  I have a LabVIEW program that includes a number of loops, but one of my curls (which surrounds a series of functions "Write TDMS") has a Boolean stop that transmits a signal through two GOLD and functions in a control of the loop (see aea of interest). My problem is that when I press the button stop the loop will not stop and will continue to save and write data that I didn't need a file.

  Could someone please help with this?

  Kind regards

  Aaron Broady

  
  

• Audio does not play when you press the arrow keys.

  Hello

  When I'm working on a project and I press the left or right side of the keyboard arrow keys to move a picture in the timeline, the audio does not play.

  He used to play and also appear in the audiometer as a level, but recently he has ceased to be. Maybe it was because of an update?

  Is it possible to turn it back on? Maybe I hit a button by accident and disabled the function.

  If it is due to an update, is there a way to revert to a previous version?

  Looking forward to you soon.

  Thank you for your time and help in advance.

  All the best

  George

  Mac OS X El Capitan 10.11.1

  iMac 27 inches, end of 2013

  Processor Intel Core i7 3.5GHz

  16GB 1600 MHz DDR3 memory

  NVIDIA GeForce GTX 780M 4096MB graphics

  First Pro CC 2015.1

  9.1.0 (version 174)

  Please let me know if you need more information and I will be happy to provide it.

  Try pressing SHIFT + S, which is the shortcut for "toggle Audio while Scrubbing."

• Pavilion 15, G8D9OPA #ACJ: my laptop does not turn on after pressing the power button

  HII, after a week that I have on my computer hp laptop 11 months but its not get. I even removed the battery and tried to get by pluging the adapter, but it doesn't work. What I would do. Please help me.

  Hi @Swati_20,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the HP Guide's Forums:

  Learn how to post and much more.

  I understand that your Pavilion laptop not turn on.

  When I did a search with the product number, you provided I have no results.  Would you be kind enough to verify this information.

  How can I find my model number or product number?

  What operating system do you use?

  When you connect it to the power light on the power supply?

  Here is a link to the HP laptops - tests and using the AC adapter that can help.

  You can also try a hard reset.   HP - notebook computers use the hard reset to solve software and hardware problems

  Please keep me updated.

  Good luck!

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to resolve your problem as " ""Accept as Solution"" " to help other members of the community!

  To show the appreciation for my efforts, please click the 'Thumbs UP' icon' below.

• Audio, attached to the text box does not restart when you click the Replay button

  Hello

  I'm currently having problems with audio / reading slides. The characteristics of sliding replay I tried (listed below) read the images and text boxes, but the audio attached to text boxes do not restart, continue as if nothing has happened during the synchronization of text boxes and images have been reset. This happens also with videos and flash files - the slide reads but the videos and flash files continue to play.

  The two replay options slide, I tried:

  With the help of a widget: http://www.cpguru.com/replay-slide-widget-for-adobe-captivate/

  Advanced use of stocks: http://www.youtube.com/watch?v=vhT7B5I3fw8

  Is there a setting I can change to make audio/video restarts along with other objects on the slide?

  Thank you!

  I thought about it--(yay!)

  Here is a screenshot of the code that worked... need to replace a 'framework' with a 'landslide' command command

  

• Two Macbook Pro, both does not start up, when I press the power button, I hear two disc bit Caryl, I see little light on the front on the displasy release button, black screen, no edge

  It was weird because I've NEVER had two computers have the same problem before. They are the model 2008 2.2 Ghz Core 2 Duo, 6 g of RAM, models of 128 GB of hard drive, the two Yosemite running, both had new hard drives, cables, batteries and RAM installed OWC (Apple approved reseller) and I use Macs for at least 20 years. In about a week, one just blacked out while sitting on my desk doing nothing, the other does the same on a week later. When I press the power button, I hear the drive hard hum twice, then all I get is the little light on the screen release button, that's all. Black screen. fails, nothing. I can press the power button and it will fit off the coast. Is it possible that some of them have infected somehow, or possibly send me the malware that has infected my system? I would not normally only, but for all of them to go down to one right after the other with the same problem just made me think, it must be the same cause, but what?  I had been in a war of fire recently with very ugly people, and I've never seen two Macs have the same exact problem in a row like that right.

  I took readers on the Macbook Pro, put them on sleds and threw them in my PowerMac, and both seemed fine, no problem, started well upward, ran utility disk on them, no problem, so I started to the checklist. Reset the PRAM. Nothing. SHIFT key at startup. Nothing. D at the start. Nothing. V order at startup. nothing. I wouldn't mind even their evisceration and making a portable useful with the parts of the two, but until I find out what the problem is, what can I do?

  If anyone has any suggestions, I would really appreciate it, I've supported every button I can think at the start, tried an inch USB key, boot and disk, this is the same Caryl bit both of the car, no chime, black screen, that's all.

  Thanks for your help.

  Damicon999 wrote:

  Is \Is possible for someone they have infected somehow, or possibly send me the malware that has infected my system?

  no chime, black screen, that's all.

  I don't think they are infected.

  The startup chime indicates that the Mac has made the initial diagnostic tests and there is no hardware problems or fundamental software.

  No edge in your case is a problem.  I think it's the luck of the draw to have 2 failures.

  In or out of warranty you can get for free a 'Apple Service Diagnostics' OTC test

  Genius of booking http://www.apple.com/retail/geniusbar/

  Online https://getsupport.apple.com/GetproductgroupList.action

  check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

• Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game. __Keyboard is very good

  Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game.
  Keyboard is fine.  Is this a compatibility issue?

  ---------------