Tecra A4 - freezing / crashing after start upward

Hello

My Tecra A4 is nearly 3 years old and over the weekend, it just started to freeze within minutes of the start.
The point at which the machine crashes seems to be when all the various treatments start are completed. The hard drive seems to be stopped and at that time there it freezes.

I managed to make it work for more than start a full crawl. Sounds weird I know, but as long as the hard drive is active the machine seems ok.
It is still then up to a point and freezes leaving me with the only option of the laptop off the power by pressing the power button. Oddly enough, I didn't press the power button I have to just tap on it and the machine switches off completely. The longest, I got it to work for since is so fortunately I managed to copy 20 minutes on all my photos etc.

I thought to try the recovery disk, but as I'm not sure why it freezes so I do not know if this will help?

Any thoughts would be greatly appreciated.

Mark

No one will be able to say exactly why your laptop freezes.
Perhaps only the operating system is confused upward and therefore, it does not work properly. This should be checked permanently.

But in my opinion, the laptop crashes because of the higher internal temperature.
Perhaps the highest temp affect that the memory modules and this would lead to these symptoms of the computer.

I had something like that on my old laptop and one of the modules was of damage due to heat.
I replaced the modules of memory, clean the cooling fans and fans using a jet of compressed air and the laptop works fine now.

In your case perhaps only cooling grids cleaning would be necessary.

Check it out!

Tags: Toshiba

Similar Questions

  • Computer FREEZES / Crash after startup or start-up

    Hello! It's a little frustrating and I had to post this with the help of another laptop because my laptop ASUS freezes/crash after starting and also during the login screen! It's like when I open and enter my password, and enter the screen and click on any program, it will just freeze and hang there! And I couldn't do anything with it! LIKE NOTHING! Nothing, I need to force close by pressing the power button for a long time and makes many times because I wanted to check whether it is really something bad ~ it's been a week but I still can't use my laptop :( The most frustrating thing is, I can't even use the recovery options! The first time a blue screen for the recovery options showed that I had the chance to choose because it froze again!

    I tried to restart my laptop and went into the advanced boot options and you click on RESTART NOW to make that screen again, but UNFORTUNATELY, the TROUBLESHOOTING option does not show! Only the choices available are "CONTINUE and EXIT to WINDOWS ' and 'TURN OFF VOLTAGE the COMPUTER '.

    I wanted to choose "Automatic repair", but given that the TROUBLESHOOTING Option does not appear it seems I have no choice. I tried several times but no luck if I had to choose REFRESH PC but another problem is in place! -_ - I don't know how! I clicked REFRESH PC and selected FOLLOWING, but he said, "COULD NOT FIND THE NECESSARY THAT WE are looking for" something like that so he can't go!

    Please help me :( I have no media recovery, so it is impossible to make the alternatives recommended on internet, I don't want to lose my files. TT__TT please help me. I really appreciate your answers! Thank you so much! ^ _ ^ You're cool!

    You can get the recovery media that you need here: http://windows.microsoft.com/en-US/windows-8/create-reset-refresh-media

  • iPhone 6s turns off after start upward with 30% of remaining battery

    6 s iPhone will turn off after starting with30% battery left please help

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

    More info here:

    https://support.Apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • Firefox always crashes when started upward.

    I open Firefox, and 5 seconds later, it blocks. During these five seconds, I click on 'Restore', and then it crashes always. After a few accidents, I have the option to start mode without failure or reboot, when I opened in safe mode it still crashes. I have not tried to reset it as I like to keep all my settings...

    As a test, start Firefox in Safe Mode; Hold down the SHIFT key
    (On Mac key Options ), and then with the program.

  • Firefox crashes always start upward to the point Windows 8.1

    I just installed Windows 8.1 on my computer. Then, I installed the latest Firefox. The installation is completed successfully. But everytime I open Firefox, it crashes just after 5 seconds.

    Here is my report id: Crash ID: bp-8e22c917-2066-4a30-8fec-cf26c2140626

    Thanks for your help.

    Start Firefox in Safe Mode {web link}
    While you are in safe mode;
    Press < Alt > or < F10 > to display the toolbar.
    Followed;

    Windows; Tools > Options
    Linux; Edit > Preferences
    Mac; name of the application > Preferences

    Then Advanced > General.
    Find and stop using hardware acceleration.

    Dig safe web sites and see if there is still a problem. Then restart.

  • Outlook Express 6 (Windows XP Pro) keep crashing after start-up.

    When it crashes at startup, it freezes when receiving mail electronic (no email is downloaded).

    See if you can get OE open and in tools | Options | General, uncheck the box: check for messages at startup and check for messages every X minutes. It's probably the gel in the poll for messages.

    Create a new identity, you probably have the corruption of dbx files. Make the new identity by default value.

    You may have a damaged identity especially if it's the default main identity. File | Identity | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

    Note: Do not use the main word in the name of the new identity.

    How to create and use identities in Outlook Express
    http://support.Microsoft.com/?kbid=209169

    An Outlook Express basic repair kit
    http://www.Microsoft.com/Windows/IE/community/columns/oerepair.mspx#ehh

    ***********************

    To avoid this in the future:

    Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

    Information on the maximum size of the .dbx files that are used by Outlook Express:
    http://support.Microsoft.com/?kbid=903095

    After you're done, followed by compacting your folders manually while working * off * and do it often.

    Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

    Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
    http://www.oehelp.com/OETips.aspx#3

    And backup often.

    Outlook Express Quick Backup (OEQB Freeware)
    http://www.oehelp.com/OEBackup/default.aspx

  • InDesign crashes after starting from Sierra update [URGENT]

    Hello

    on my MacBook Pro, InDesign crashes immediately after the start from Sierra has been installed.

    1 uninstall and reinstall do not solve the problem

    2 setting the menu bar auto-masquage did not help.

    If someone has an idea, I would be eternally grateful...

    Personal Adobe > please help, I need to finish a project quickly.

    Kind regards.

    OK in my case, that it is related to the RAID used on my computer, with which Indesign 11.4.1 problems, known by developers.

    Easy solution: uninstall 11.4.1, install version 11 and install the update to 11.4 and NOT 11.4.1.

    11.4 works well.

    Thanks to the team of Adobe support for this solution.

  • Why my App tab disappears after starting upwards?

    I tried to set up Twitter on a tab App, but every morning after startup, I have to restore. I use CCleaner at the start, but cannot understand the cookies to keep (if this is the solution).

    (PIN) App tabs and groups of tabs (Panorama) are stored in session data [1] in the sessionstore.js file [2] in the Firefox profile folder [3].

    Make sure that you do not remove the navigation, search and download history on Firefox to clear the browsing history when you close Firefox.

    If you like CCleaner cleaning software, then make sure that the Session is disabled in the parameters of the Firefox application.

  • Tecra S5 - Black display after starting windows XP

    Hello
    I had problems with the display driver last month after the new update, the driver of the original view was gone.
    After some restorations of older versions the screen worked, but not with the original display driver. I was Born the driver on the laptop and the character to install this new, but something is wrong.
    When I start the PC, the bios password is ask, filled, windows XP is started and the screen is dark without courier. Look of the screen reader does not start automatically to start Windows XP.

    What can I do? Only option work you the PC recovery CD?

    You can start a computer laptop properly using SafeMode (F8 at startup) option?

    What can you do?
    In my opinion, you have only two options: to install the Toshiba display driver or install the new OS by using the original recovery disk (radical option but it is better).

  • Video laptop G72 dies after start upward

    I have a G72 with the Radeon 5470 gpu.  2 days ago, my wife received a blue screen on Windows 7 x 64, stating that the driver had stopped working.  At go here the G72 not would make on the desktop without the screen goes dead.  The machine starts in safe mode fine.   I tried as much as I could think to solve this problem, but finally backed its data and restored at the factory.   The problem persisted and I ended up disabling the ATI card in the control panel.  The machine seemed to work after that.   I have begain long BONE up to current curing process.  About 2 sets of updates after Win 7 SP1 the problem came back.   I started in safe mode and checked the driver and discovered that it had been reactivated.  I tried to disable it again and reboot.  Sometimes she remains disabled through reboot, but sometimes it isn't.  At this point the machine turns to a black screen (video not only in black but dead) after that I sign.   This was without taking into account the option enable or disable the status on the ATI card.

    Then...   I tried to make another hook the operating system and got to half way through.  Installing Windows now tries to restart and after that the machine is in place, the screen goes dead.

    Any suggestions?   Is there a way to disable the card in the bios?  It can be physically removed the card?

    Thank you.

    Thanks for your help on this.  The hard reset doesn't change anything.

    After about 20 restarts, I could lift the machine with a regular VGA driver and reinstall the driver of IntelHD.  I can now go to full resolution.  I agree that the ATI card is broken.  Probably because of the heat. (just my opinion)

    For all those running in this kind of failure the key here is persistence.  Keep restarting in safe mode and disable the ATI card in Device Manager, and eventually, you will get a clean boot.  Once you have a clean boot, install your Intel drivers and be happy that you have a laptop and not a brick.

    Peace.

  • Pavilion G6 1010SA: Blank screen after start upward

    Unless I leave my laptop on sleep I get the following problem: when I then start it starts (power light & fan on and I hear cd rom as it starts) but there is no display on the screen at all, it is only black. Either by the way, the blue light caps lock shift flashes once every five seconds then stops, then continues the cycle. I went through all the normal fixes (remove the battery press button start for 30 sec etc etc no luck) and after perseveering attempts of 40 or 50 by pressing F8 repeatedly at the start I finally get a result.  and I am offered beginning of normal startup mode / safe etc. and then windows 7 log on screen performance. Evertime I get the screen back, I noticed that the date is returned in May 2009. Other small things like no sound setting when I click on the desktop icon are also apparent. Restore to an earlier time makes a difference in the way.

    Is this all along the CMOS battery? I know it's in a nearly inaccessible spot on this laptop!

    Also, I tried to reload the BIOS on the HP site but it has no effect (despite the fact that there is an update this year apparently).

    Insyde F52 05/15/2012.

    Help?

    Hi @WaterlooSunset ,

    Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your HP Pavilion g6-1010sa Notebook and the problems dated back to 2009. Try to check the RTC battery. Could be low and causing the time clock (RTC) incorrect real which would cause the error of the internal battery. Here is a document to show you how you can replace that.

    Hope this helps you.

    Thank you.

  • DON'T LOG ON THE SCREEN AFTER STARTING UPWARDS

    Hello

    When I woke up, my computer was in hibernation, and then when I turned it on, everything was different, including my personal settings. Then I started to download my themes because I couldn't find my personal stuff. Then I managed to get my themes, I rebooted my computer, and then all my personal stuff was back to normal. I had downloaded a log on-screen softwear before restarting the PC.

    After the reboot, everything worked well. So I decided to restart, just to make sure that everything is fine, then it starts up normally and loads normally well, but after that the screen is not black, no log on screen for detection of face or password. I've been close and turn my PC for the last two hours and nothing has changed, please help, I have a request that I need to present and I need your help

    Try the system restore / repair my computer:
    http://Windows.Microsoft.com/en-GB/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

    http://Windows.Microsoft.com/en-GB/Windows/what-are-system-recovery-options#what-are-system-recovery-options=Windows-7

  • Another case of player XI crashing after start

    I have a Lenovo Yoga 13: I've updated to 8.1 win a few days ago and the problem started.  Reader crashes at startup, it happens if I open this stand alone or by double clicking on a pdf file.

    I can view PDF documents via the Chrome plugin well (it's a different app?).

    Uninstall/reinstall did not help.

    Acceptance of the EULA did not help.

    This "reg" key does not exist on my system:

    [HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\11.0\IPM]

    so, I didn't try that.

    Being offline has not helped.

    What should I try?

    Thank you.

    Try to disable Protected Mode.  Because you can not open the player itself, disable it via registry: download, unzip, then run the attached registry script.

  • Photoshop crashes after starting with white window

    Screen Shot 2013-09-22 at 05.38.18.png

    When I run Photoshop I see this after a few seconds. PS is then not answer and I have to force her to leave.

    Once I could see the window as "Participate to improve" but I couldn't click it as PS freezes again.

    Mac OSX Lion mountain with all updates, freshly installed 2 days ago. Photoshop has been installed twice intant. I already deleted the preferences to check if this is useful, but same thing happens again. To be sure this isn't one of the custom brushes I have re installed PS

    Screen Shot 2013-09-22 at 05.47.32.png

    How do I get rid of the window or how I can fix this problem?

    Thanks to you all

    Hi Bonepenonline,

    Please open Photoshop root account and check if its not working here.

    New user account: http://support.apple.com/kb/ht1528

    Kind regards

    Romit Sinha

  • Dreamweaver 8 crashing after start-up

    I had this problem a few weeks ago and the culprit was a corrupted file, but for the life of me I can't find the site that explains how to fix this. It was recreate a Site definition folder (or Cache, I don't remember) and replacing the old. I was exploring to do this as DW8 does not completely start.

    If anyone knows what I'm talking about can lend you a hand please? I have to get this up and running again.

    Thank you

    After much research I found that the place to go to fix the problem is in your Application Data folder. Simply navigate to this place (Windows only)
    The documents and Settings\ username\Application Data\Macromedia\Dreamweaver 8\Configuration\SiteCache

    In the cash site folder delete or rename the site definition that is suspected to have caused the problem. Launch Dreamweaver 8. The site cache will be rebuilt and you're back in business.

Maybe you are looking for