Tecra A5 PTA51E stop start if the power is not connected

Similar Questions

• Trackpad and usb mouse stop temporarily when the power adapter is connected

  It is a very weird, crazy question. It began to happen today.

  Introduction: I installed ubuntu since 2008 in this laptop from version 8, now I installed 11.04. My brother has the same problem since a month there is around. It has the same model of laptop (DV9000 HP), but Windows Vista computer.

  The problem: mouse freeze random by 1 or 2 seconds, the two mouse pad and usb mouse attached. When I unplug the AC adapter, mouse works well immediately.

  Indices: I forgot my adapter in my apartment this week, and I got my brother to work here (the House of my parents). And another hint, I used a power adapter for cars, today give it a 19, 7V instead 18, original 5V AC adapter. My brother also use this car adapter.

  Hey, try to get the other original AC adapter. My laptop has become normal when I got my power adapter. See me first post

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• Pagefile.sys has completely disappeared. It started when the power failed and my computer crashed.

  My pagefile.sys has completely disappeared. This all started when the power failed and my computer crashed.
  I get the message that he was away, I went to the performance and settings and tried to change custom settings & re-start.

  No matter what I do, nothing works. I lost several hours of visiting sites for tips and nothing seems to help.

  I was told when re-boots WinXP it creates the new file pagefile.sys and I should delete the pagefile.sys file may be corrupted on the C drive.

  So I put the folders to show hidden files and delete pagefile.sys. I have re-set and tried to recover with no success.

  There is now absolutely no pagefile.sys on my C drive. Anyone know how I can get back my pagefile.sys?

  I want to get my virtual memory works again?

  Thank you very much in advance!

  I'd start first with the chkdsk/r.

  Don't forget - if you have a factory installed recovery Partition, fixmbr will scan it as the Master Boot Record that written XP will equal not the MBR installed by the factory, so first run chkdsk /r (did I say that already)?

  Here are some instructions:

  http://pcsupport.about.com/od/fixtheproblem/SS/RCONSOLE.htm

  Where people have no XP bootable media, here are my instructions:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• In Windows Media Player 11 when spend to add songs, how get the list to stop starting at the top?

  With WMP11, when adding pieces of the current reading library, I often change between two tabs. My question is every time I switch back to the library to add more songs, tab how can I get the list to stop starting at the top? I have a number of songs scrolling on there where I left last can be very inconvenient. I remember with an older version when you leave the library, that he would stay where you left it. Yet once, how can I stop the library always start at the top and instead pick up where I left off?

  Thank you very much

  Reinstalling wmp11

• Dell Latitude E6400 does not start pressing the power instead button, I have to remove the battery.

  Original title: problem starting Latitude E6400 lappie

  Hi all

  When I start my dell latitude6400 is not start pressing the power instead button I have to remove the battery to the rear and place it again, and then the lappie starts... someone can help to...
  Thank you

  Hello

  1. what happens when you start the laptop, you receive no error message?

  2 have you made any changes to the computer before the show?

  I suggest to remove the battery and connect the laptop to AC power and then try to start the computer to see if the problem is with the battery.

  I suggest you to contact Dell support on the issue, as this can be a hardware problem.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=DHS&CS=19

• Satellite Pro L20: battery not charge when the power adapter is connected

  Hello

  all advice appreciated.

  I had a Satellite Pro L20 for about 18 months. Recently, battery does not charge when the power adapter is connected. The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile. However the ACPI often said that AC is "offline."

  There are two recent occurrences that coincide with this problem, I try to eliminate:

  1. my friends rat chewed by the feeder for pets! Power is Mobile OK insofar as he fled sector - the rat seems to have simply chewed by the outer cover (I see some threads, but I think that is just a shield, although I'm not an electrician).

  2. I put the laptop in hibernation for the first time. That seemed to mess up the system a bit, which was what initially drew my attention to the problem. This question is a bit complicated because I'm under Linux (Xubuntu).

  I updated the drivers etc from windows when I bought the laptop. Never had any problems until now and have been running linux for centuries. Also, I have mainly the laptop the power supply turned off, but do not remove the battery (is that really a problem these days?)

  I obviously need to replace the adapter, but is - it is likely (and how I can check) that the battery was borked until?

  see you soon
  Chris

  First, please check if the other are lit.
  If the AC led and power led are on the adapter sector is ok and it provides the power to the laptop.

  > The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile
  If the battery LED is yellow, this means that the battery is not fully charged and if the Green led changes then recharging is caught and the battery has been recharged.

  So I really don t see any problems with the charge process.

  Maybe the battery is old and so you cannot use it for an extended in such a case only the replacement of the battery could help.

• ProBook 4530 s BIOS update fails - "...". the computer is not connected to the external power supply. »

  I made an update of the system to the original settings and everything seems to go as usual.  While performiong the many windows updates, I noticed that the battery indicator indicates "no battery installed.  I found a few solutions dealing with this problem (none of the other solutions worked) and that which is shown updating BIOS.  I checked and the BIOS is F.07 and the current version is F.41.  I downloaded the update and begun the process of Windows.  The system restarts to start the process, but when the BIOS updated starts I get the following message:

  "A significant update of the BIOS of the system is available, but the computer is not connected to the external power supply.  Please connect the external power supply and then press Enter to continue. »

  The computer is connected to the power of HP to the original address since it is the only way so he can turn it on.  I tried removing the battery and from the update only the connected power and get the same result.

  Either way, I tried to insert a different battery, I have more than one of these laptops.

  Sorry

  Please test the battery after boot press F2 HP Diagnostics

  http://support.HP.com/us-en/document/c00821429

  and calibration of the battery for laptop

  http://support.HP.com/us-en/document/c00817650

• My Pavilion g does not start. The switch does not work. Any ideas how to start the computer?

  My laptop series HP Pavilion G7-1135sd will not start. I get no response from the switch. Some lights come but the display does not illuminate. I tried holding down the power switch for long periods - without success. I tried to take out the battery - also without success. Any ideas?

  Hi @DutchyH,

  Welcome to the Forum.  Sorry to hear of your problem power button on your HP Pavilion g7-1135sd.

  In a situation like this.  You have removed the battery and tried to push the power button with out.

  Have you tried while he was not powered as well.  So basically, remove the battery and hold the power button for 40 seconds with the power cord not plugged in.  Then replace the battery followed by power cord.  Then press the power button again.  If it does not at this stage I would contact HP support by phone.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Telephone support for other regions.

  I hope this has helped you.

  Thanks again for posting and have a great day.

• Windows Live Mail could not be started. The application could not open the Windows Live Mail message store error code: 0x800C0155

  Origianl title: windows live does not open

  My Windows Live Mail has recently stopped working, by double-clicking on the desktop icon top of page does not open the program, appears it the "Windows Live Mail" logo and then a message saying:-"Windows Live Mail could not be started. The application could not open the Windows Live Mail message store. Your Windows Live Mail mailbox is currently being used by another program, such as a virus scanner. close the program or wait so he could complete its operation, then open Windows Live Mail again. (0x800C0155).

  I tried to reinstall WLM, restore my computer, remove anti virus protection. Nothing works

  Help, please!

  Hi B Clinton,

  For a more specialized on issue of Windows Live Mail help, send your query on the Windows Live Forum.

  Windows Live Forum -http://windowslivehelp.com/

• The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  Original title: clear the display

  Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.

  

  Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.

  You can now close the Power Options pane when you return.

• Re: Satellite A300-21I trying to start but the screen does not light upward

  I have a laptop Toshiba Satellite A300-21I 15.4-inch around the age of 2 months.
  He walks yesterday and received a message (very short)-initialization failed, see the event log.

  Laptop computer tries to start but the display does not illuminate.
  No prior problems.

  The indices of anyone?
  Stanley

  Hello

  You are able to access the BIOS?
  You see a Toshiba start screen that usually appears at the beginning?

  What happens if you press F8 at the beginning of the boot process?

  Please provide more details!

• I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  Can she be seen by disk utility (and which version of Mac OS X is)

• Error Windows Live Mail: Windows Live Mail could not be started. The application could not open Windows Live Mail, mailbox messages.

  original title: Windows Live Mail

  I am trying to send messages on my own page of email, but windows live mail does not accept my emails.

  The message I get is as follows:
  Windows Live Mail could not be started. The application could not open Windows Live Mail, mailbox messages. My Windows Live Mail mailbox data is currently used by another program, such as a virus scanner.

  I need to close the program or wait for it to complete its operation and then reopen Windows Live Mail. Are the numbers that I get this message: (0x800c0455, 997) then I ok this message and receive another message.

  Windows Live Mail could not be started because. MSmail.dll could not be initialized.
  Windows Live Mail may not be installed correctly.

  Can you please help me settle this question, as I have a lot of mail to be sent to my e-mail address?

  Hello Annie,.

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• What happens when "Still waiting for network when starting the computer and logon" is enabled and that the computer is not connected to the network?

  In MMC, I created the group policy and found through web search that computers with mapped network drives can connect better if "always wait for network when starting the computer and logon" is enabled...  So far, it has been very nice to have allowed.  Is no longer mapped network drives see the place as disconnected.  But what happens if the computer is not connected to a network?  Say the wireless router will turn off and your computer always 'wait... '. "turned on, should the user could still log the computer timely?

  Check these:
  Troubleshooting intermittent slow connection or slow start of http://blogs.technet.com/b/instan/archive/2008/04/17/troubleshooting-the-intermittent-slow-logon-or-slow-startup.aspx
  Priority and group policy processing
  http://TechNet.Microsoft.com/en-us/library/cc785665%28WS.10%29.aspx