Tecra A5: Question about usage and warranty

Similar Questions

• Tecra A2: Question about DVI and external monitor

  Hello
  I am trying to get a DVI Signal of the Tecra A2 using the Advanced Port Replicator III but without success. The A2 does support DVI anyway?
  Another question: is it possible to set up the main display to the external monitor using "extended Desktop"?

  Thank you
  Ralph Menon

  Hello Ralph

  Your unit doesn t support DVI port and you can't use it. As far as I know just the ports that you can find on the device, you can use in Port Replicator because the signal is just loop through.

  The problem with the screen is that mobile has the main value and it cannot be changed (on my Tecra M1 nor). The windows will be implemented on an external but password box will always be displayed on the screen of the laptop.

  Good bye

• About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  Hi Michael,

  If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

  One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

  

  Content

  To manage this content, you are currently subscribed and changing your preferences, select the content.

  Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

  You can select to terminate a subscription to a thread.

  

  Learn how to manage your subscriptions

  Take care.

• Question about business and Service of Proxy

  Hi friends,
  I have a question about services and proxy services business IE I need to find the time it takes to call an operation on multipoint business of proxy service, how can I do in oracle service bus (OSB)? You can help quickly

  If your question is only about the performance analysis,
  try to activate the 'monitoring' on the 'operational' of the Service Proxy Service/Company tab.
  For the Proxy Services, if you activate at the level of the 'Action' you get a lot of information about each individual action in a power of attorney.

  See http://www.javamonamour.org/2011/06/osb-profiling-your-proxy-service.html

• Windows 7 starts questions about mac and office 2010 following an installation

  It's a long cut as short as vent. I've been miss sold a record of upgrade of windows 8 full disk-shaped, with norton and office 2010. My goal of creating windows on my mac for a course I'm taking. After that know I need windows 7, I bought it online. I created a partition of 80g on my mac charge windows 7, then norton. Until I loaded the office that I was invited to perform the update from apple in the windows software 7. Note before I installed norton, I load boot camp mac utilities according to the instructions. So, followed by all as should be. The prompt update from apple was quick time, iTunes and airport, I checked all and then updated. Then I loaded office 2010 and obtained throughout the process from the Microsoft site. On the last part of the installation, the installation failed due to a mistake of hanging iTunes. I tried again and again, I fixed the update to iTunes to add and remove the section of windows. Then, I got different errors. I decided to remove the whole score without uninstalling all programs again. When I get to the windows live, that this falls priming. I get various error messages whenever I try to start the process. As a header of Bank pool, fatal error and so on. Can anyone help? What is the damage?

  Hello

  Thanks for posting your query in Microsoft Community.

  Because the question is limited to Windows 7 on your Mac with Boot Camp, I suggest you contact Apple Boot Camp support for assistance.

  http://www.Apple.com/support/Bootcamp/

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Question about snapshots and virtual machines

  Hi all

  I have a small question about snapshots. I use VMware for about 6 months and I read about snapshots and how they work but still have a question to make sure that I understand how it works and it will work the way I think it works.

  I have a Windows 2003 server, which is a virtual machine. I have an application that uses MSDE database. I want to upgrade the database to MS SQL 2005, but to do this I need to back up the MSDE database, uninstall MSDE, and then install SQL 2005 and move the SQL database. This happens on the same VM.

  What I was thinking if I well Snapshots correctly is to snap turned the virtual machine before doing anything. Then do my upgrade steps and see if everything works. If its all messed up so I should be able to return to my shot and everything should be the way he had. What is the good? One of the main reasons I moved the server VM was because of this upgrade.

  After reading the documentation for the snapshots, it's how I undestood it. Pretty much any change could be reversed with snapshots. I wish just they had put in a few examples in the PDF file. Also it would be the same for all type of grades of the OS? Could I snapshot a Windows 2000 Server, and then "in the upgrade of the square" to Windows 2003? I've cloned a VM to do this but was curious about whether snapshots would be just as easy.

  Thanks for your help.

  Hello.

  What I was thinking if I well Snapshots correctly is to snap turned the virtual machine before doing anything. Then do my upgrade steps and see if everything works. If its all messed up so I should be able to return to my shot and everything should be the way he had. What is the good?

  That is right.

  After reading the documentation for the snapshots, it's how I undestood it. Pretty much any change could be reversed with snapshots. I wish just they had put in a few examples in the PDF file. Also it would be the same for all type of grades of the OS? Could I snapshot a Windows 2000 Server, and then "in the upgrade of the square" to Windows 2003? I've cloned a VM to do this but was curious about whether snapshots would be just as easy.

  Exactly the same thing for the upgrades of the OS.

  Perhaps the most important thing with the snapshots is to keep an eye on them and don't let them sit too long or become too big.  You have described the use cases are very good uses for snapshots.  Just make sure you have a solid plan with a schedule set, so that you can come back or validate changes before the snapshot becomes too large.

  Good luck!

• Question about CR and LF

  Hey guys,.

  Quick question on LF and CR. As you can see I'm LF and CR of writing to a text file and because directly.

  

  However, I don't get the CR at the time where I read it. Why is this? Is it because Windows ignores the CR?

  Thank you

  Hi dora,

  read the Help for the WriteText function.

  There is an option for handling of CR/LF characters and explained mentioned in the "Advanced" section of the article for help!

• Tecra M3 - questions about the RAM maximum and graphics driver update

  Hi people,

  I have a Tecra M3 (Variant FBCF with the Geforce 6600 w / 128 MB) and I have two questions that I hope someone here can help me with:

  (1) what is the maximum amount of RAM that I can install here? The manual says 2 GB (2 x 1 GB), but I do not see why the laptop would be paralyzed this necessary way, cause as far as I know the 915G chipset can handle 4 GB of RAM. If anyone knows definitively what?

  (2) the latest drivers from nvidia for XP are 2005. As most of you probably know, nvidia systematically more than past performance with versions driver and adds compatibility with some games that end up in trouble. The real driver from the nvidia site does not install because it says that it cannot find any compatible hardware. Can't Toshiba even a pilot updated annually? There is a driver of 2007 for Vista, I can't believe that if they did, they decide refresh the XP one while they were to him. Any chance of their audience on this here? I could force the nvidia.com driver to install, but I don't think that it's necessarily a great idea.

  Thank you!

  Hello

  the maximum amount specified for this machine memory is 2 GB and 4 GB not but you can try it with 2x2gb modules.

  With regard to your graphics: Don t use the nvidia driver since it is not suitable for mobile graphics chipsets and has no timing in the driver that is needed to run flawlessly.

  I'd rather you to view laptopvideo2go and download some drivers here. :)

  Welcome them

• Tecra 8000: questions about memory, mouse and screen

  Hi, im using a tecra 8200, mouse keeps drifting upward left after 30 minutes? keyboard problem?
  Sometimes the screen displays changr, from very dark then normal?
  Finally I was told that I can put in a module of 512 mem alongside 256 existing will this work.
  Thanks for any reply Biffo

  Hello

  As you know on this path it is not easy to give you a good answer on all these problems. The same happen to me with my mouse, but AFAIK it's normal because the mouse must obviously be calibrated again and again.

  Daniel is right about the memory. You can use two modules with 256 MB (PC100 256 MB - PA3069U - 1 M 25). 512 MB should be max according to the specifications of this unit.

  Good bye

• Satellite L850-Y3110 - Question about the international warranty

  I bought a portable Satellite L850-Y3110 in India that has an international warranty.
  There is a problem with it now, it's the cd drive is broken and I took it to an authorized to Newcastle service center.

  Need the driver cd to replace, but now Im says that Toshiba usually give the cause of the part I did not but he to the United Kingdom, and the person told me to go back to the place where I bought and the fix here, I won't go there any time soon, so it's out of the option.

  My question is what is the point of the international interest if it won't be such an inconvenience.

  When I bought a laptop that I wanted one that would guarantee internationally because Im student out of the country for education, that's why I bought this one because it has international warranty and my laptop is still under warranty international.

  What should I do now?

  Hello

  I m not very well on portable computers sold in India, but cell phones sold in Europe are covered with at least 1 year standard warranty, valid from the date of purchase
  http://www.Toshiba.EU/services/standard-warranty/

  This warranty does not cover repairs in other countries, but in case of hardware malfunction, you must visit the authorized service provider in the country where you made the purchase.

  To get the international warranty coverage you must buy an extended international warranty: details here http://www.toshiba.eu/services/warranty-extension/

  In the case where the international interest has been registered for your laptop, the ASP to the United Kingdom should be able to repair the laptop in international warranty conditions.

• Tecra M5 - Question about upgrades

  I had my Tecra N5-ptm51e for a few months and was looking to update and ive got 3 questions

  1. What is the best compatible processor with my laptop.

  2. What is the max ram supported

  3 ive tried upgrading my laptop to Windows 7, but I needed to update my bios and I tried to do and she didn't

  If anyone can help me with this, so I will be gratful

  Thank you very much
  Rhys

  Hello

  OK, so I'll try to help you as best I can ;)

  1 update CPU is not supported as you can read here:
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  2 maximum capacity of RAM for your Tecra M5 should be 4 GB according to the specifications. This means that you can install the 2 GB of memory on each RAM slot.
  The specifications are DDR2-667 you need.

  3 and what's exactly happened after update BIOS? You can start your laptop?
  I put t think that BIOS update is required for Windows 7. In your case I Don t do this update, Windows 7 will also work with the old version.

• Tecra 8000: Question about the possibility of upgrade

  I have a tecra 8000 with a pentium 2 300 mhz processor and I was wondering if it would be up to class? any help would be appreciated thanks.

  Hello

  Well, in general it is not possible to upgrade the CPU because the cpu is fixed and soldered on the motherboard. But sometimes the CPU is only mated. I'm not sure about this device, but as far as I know, this device was shipped with Pentium II 400 233 MHz, 333 MHz and 400 MHz Dixon.
  But if you want to upgrade the CPU to change many other parts because the plu processor produce more heat and this process can cause overheating problems.
  So if you want you can request the service of Toshiba for details.

• Question about the extended warranty on Satellite A300-1EI

  Nice day.
  I need to some information and help please.
  I bought a laptop around mid September 2008 in Saudi Arabia. (Jarir Bokstore). The store had a promotion whereby you get the standard one year international warranty, BUT they give you a further extension of one year (so 2 years in total).
  I intended to have bought an extended warranty for a period of three years. The seller told me that I can activate my warranty 'gift' and later buy another warranty extendable to a total of 4 years international coverage.

  I signed the guarantee and it appears on the portal of warranty toshiba.
  However, when I returned to the store to buy a new extended warranty told me that you cannot register more than one warranty.
  I found it strange and therefore did not buy the extended warranty still additional. I need to know if it's actually true, or I'll always be able to buy an extended warranty again. Seems that I meet a brick wall, when I ask the salemen... .thought I would try the forum instead.

  I need to get information from a reliable and trustworthy source.
  The other news, they also gave me, is that they are waiting for news from Toshiba regarding the same subject.

  Kindly help.
  I thank you and looks forward to a response.
  Lukman

  Hello

  AFAIK all Toshiba laptops are covered under warranty for one year (12 months).
  If you would register your laptop on the Europe of Toshiba page you would get more than one year warranty; total 2 years warranty.

  > The store had a promotion whereby you get the standard one year international warranty, BUT they give you a further extension of one year (so 2 years in total).
  The additional year of warranty is not a gift from the shop. You will get this additional year warranty always if you would register the laptop. It has nothing to do with the place where you purchase this laptop.

  So now, a few words about your warranty extensions.
  First, you will need to register your laptop on the Europe of Toshiba page.
  This registration will allow the second extra year of warranty. (as mentioned above)
  Now if you want you can buy even more extended.

  Toshiba offers various packages and in your case I would recommend to check this Toshiba Europe page for more details:
  http://EU.computers.Toshiba-Europe.com-> download-> guarantee and registration for the Service & support

  Welcome them

• Question about the battery warranty

  Hello

  I own a satellite L300 and with everest, I discovered that my 10 month battery has a capacity of 12% loss.
  It is still under the 1 year warranty.
  I searched everywere and I couldn't find specific conditions for warranty Toshiba battery, so I want to know if it qualifies for replacement.

  Thank you.

  In my opinion these questions, you should clarify with the nearest Toshiba service provider.
  If you have some physical problems then service is the right place where you can ask for help advice and expert.

  By the way: I don't think that tool Everest is relevant for the verification of the hardware features.

• M30-832: Questions about memory and DVD player

  Hi all, new to laptops up to have a few questions! First of all, I have a Satellite M30-832.
  1. He has on the dvd player on the side of the Compact disk with re-writable below image and sign dvd R/RW under. That means it is a DVD burner as well? It does not sem to recognize blank DVDs and I was under the impression that it should be possible to write about them!

  2. can I upgrade the memory with memory DDR - RAM modules or does take a special type? And how to change them!

  Thank you very much

  Hi Richard,

  From what I can find your M30 832 is equipped with a DVD burner so you should be able to burn DVDs (the specification says you can only burn at X 1 speed for DVDs).

  You should be able to update your RAM to a maximum of 2 GB and I recommend you buy a quality mark to avoid any problems. Your user manual should have details on how to change the RAM modules, but generally it will be to remove a panel of access (usually on the bottom of the unit) and then releasing it two clips (one on each side of the RAM modules) plastic spring-loaded and gently raising the output modules.

  Please make sure that you either wear a wristband anti-statuc dirt or this earth you yourself before accessing RAM modules. They are very sensitive to electrostatic.

  You can find suppliers of RAM suitable if you GOOGLE 'M30 832 RAM.

  HTH)