Tecra A6 - external mouse connected to USB erraticly port rolls

Similar Questions

• Tecra A8: external keyboard connected to the serial port: the necessary specific configurations?

  Hello
  I want to share a monitor and an external keyboard with Tecra A8 and a desktop computer. To do this, I bought a switch 2-port Linksys where I plugged the external monitor and a keyboard. With the monitor without problem because there is a specific port for this. However my Tecra has only 3 USB ports and a serial port 6-pin where I connected (with a 6-pin Mini DIN adapter) on the keyboard. When I turn on the screen it's ok, but the keyboard (I also tried a mouse) does not work. Do I need a specific configuration on the serial port to accept the external keyboard? If so, what commands do I need on the XP operating system?
  Thank you
  Luis

  RGB (monitor) port used to connect the external monitor.
  If you want to connect the external keyboard, you have to use the USB ports.
  Additional legacy USB emulation must be enabled for the keyboard.
  These settings you can change in the Toshiba HWSetup under control panel.

  If you connect multiple devices to the switch USB (hub) Please be sure that the USB hub using external power.
  A low power USB could be a reason for the external USB device failure.

• Satellite U300 - only the external mouse works via USB

  My touchpad has stopped working. I tried to reload the driver, reset the settings via the control panel and checked the Fn F10 button. My external mouse works via USB and I have not activated the button ' disable when the external mouse connected "(and even when the mouse is disconnected the touchpad still does not work).

  Any help would be appreciated. I don't know that I missed something very simple.

  Hey Buddy,

  > checked the button Fn F10
  It is the combination of bad for touchpad keys. You must press the combination of keys FN + F9 to toggle the touchpad.

  Check this box!

• Tecra A20 + external mouse problem

  Hello, I have some problem with a Tecra A20 which is connected to a docking station. If I start the laptop with the lid down and you start Microsoft Outlook the left button of the mouse on the external mouse acts as a right mouse click (the right button of the mouse serves as a right-click). Only, the fault occurs in Office applications and does not appear when the laptop is started when the cover is opened. I tried to reinstall all drivers for mouse/touch pad, Toshiba software and office software. I've also been through all the power save and docking of parameters, but the problem persists.

  Hello

  I use in my office series Tecra M with docking station and external keyboard and mouse. I have gift? t know how it is pre-installed in your case, but with my external keyboard and mouse, I myself? (troisieme party software? allows me a configuration complete external mouse.

  Is the same situation in your case?

• drive external hard connected via usb hub powered Time Capsule guard fall...

  Hello.

  Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.

  When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..

  After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.

  What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?

  Just seems like something somewhere that expire, causing it to drop the connection...

  Thanks for your useful suggestions to fix this!

  Is your TC the Gen5, model AC?

  I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.

  What is the speaker (the box is powered)?

  Quality of the envelope varies a lot... What is it??

  If this is the typical brand X... Plug it into your Mac. is it reliable?

  Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.

  I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.

  I start TM. After a few minutes the backup fruitbodies.

  Check in the finder, it has created the sparsebundle and works.

  Can you have a USB hub between the external hard drive and time capsuls?

  It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...

  Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...

  The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.

  I started a thread for a database just now... has not progressed much.

  https://discussions.Apple.com/thread/5912861?TSTART=0

• How can I keep my internal on my work laptop mousepad while I have an external mouse connected?

  I had to have a new hard drive, put on my laptop. Since then, I had problems with my external mouse I use. The guys at PC shop told me how to turn off my internal mouse pad so that I would not inadvertently touching the mouse pad while typing and get unwanted words in places that I didn't want them to appear. But now I'm having this problem again. Can you tell me where to go to turn off my internal mousepad while I use my external mouse I have installed? I prefer to use external mouse only. Thank you

  I had to have a new hard drive, put on my laptop. Since then, I had problems with my external mouse I use. The guys at PC shop told me how to turn off my internal mouse pad so that I would not inadvertently touching the mouse pad while typing and get unwanted words in places that I didn't want them to appear. But now I'm having this problem again. Can you tell me where to go to turn off my internal mousepad while I use my external mouse I have installed? I prefer to use external mouse only. Thank you

  That's how I did it on my HP laptop.  Hold down the Windows key and press 'R '.  You get the run dialogue box. Type in 'Control' (without the quotes). Click on 'OK' Control Panel opens.  Find "Mouse" and click it. You should see a tab that reads "device settings". Click this tab and just below where it is the device listed, you should see a check box for "Disable pointing device internal when the external USB pointing device is attached." Click the box to check and see if it will work.

• Drive external hard connected via USB hub: icons not showing on desktop

  Hi... on an iMac 2015, using a USB hub 3.0 occasionally to connect an external hard drive (which stores these things as art assets)... but the external hard drive icon does not appear on the desktop... it IS in the sidebar of Finder, though...

  But on the icon the Finder sidebar, the small icon "eject" gray is missing, and the only way to eject is to right click and select "eject" or use the eject button in the Finder toolbar... it's okay...

  But is there a way to display the icon on the desktop, so I can always remember to eject the disks attached?

  (the desktop icon shows normally when connected directly via the USB ports at the rear)

  Thank you.

  Finder-> Preferences-> general, check the appropriate boxes under "show these items on the desktop".

  [My personal choice is them having all checked]

• Vista doesn't show that drive external hard connected by USB (USB 2.0 TO IDE)

  I formatted and partitioned Maxtor 30 GB HD and you want to use as external backup storage device. I put the jumper to "Master" and the format type is NTFS. The HD works perfectly with my old PC (Win XP) as an external drive via USB. But when I set with my new PC (Vista Home Premium), the HD appears only in "Device Manager" and not the case in ' mycomputer ' or 'disk management '. I've tried different USB ports on my new PC, but I could not be able to get it recognized by Vista yet. I searched on the internet and most said about changing the drive letters and fitness solutions in form, but my problem is that disk external drive does not appear in the "Disk management" section at all in any form. Any help in this regard will be highly appreciated.

  Hello
  
  1. What is the status of this drive in Device Manager? Is there an exclamation next to him?
  
  Check the status of this device by using the command of part of the disk. Refer to the he links below for more information and measures.
  A Description of the Diskpart command-line utility
  http://support.Microsoft.com/kb/300415
   
  DiskPart command-line options
  http://TechNet.Microsoft.com/en-us/library/cc766465 (WS.10) .aspx
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP laptop - 15-f233wm: external monitor connected to the HDMI port has video but NO sound

  If I connect an external monitor to the HDMI port and check my audio device on the right on the screen cone winder it displays 2 only) 1 HP and Intel) 2 Audio display speakers and No HDMI option selection.

  Ernie4576 wrote:
  

  If I connect an external monitor to the HDMI port and check my audio device on the right on the screen cone winder it displays 2 only) 1 HP and Intel) 2 Audio display speakers and No HDMI option selection.

  By adopting the option monitor MHDI PC/AV Pc mode will solve the problem, I use a unit screen color Samsung TYPE model / MODEL: C27F591FD (N).

  The device playback option on the care of the portable property are all set to default, Intel C27f591 display sound card works fine!

• hard pad works do not (yellow on), forced to use a mouse with a USB connection

  For manipulaying the cursor touchpad has stopped working.

  I have to use a mouse connected via USB to the cursor automatically.
   
  [Moved from comments]

  Hi Kilei,

  1. what operating system is installed on the computer?

  2. What is the brand and model of the computer?

  Answer the questions to help you best.

  Good day!

• 2.72 TB external drive via the USB port

  I realize, this is an old post, but I really need help.  I formatted a 3 TB on Windows 7 64 bit external drive connected via USB. I must have formatted MBR but player showed still 2.72 TB of space - great! I copied the backup data on this disc, leaving 129 GB of space.  The problem seems is occurred when I actually copied data that was full of 2 TB.

  After that everything was copied, I went to remove disc and it says that it is in use. I waited for an hour, the same thing, so I restarted the computer. NOW, this drive will rise not on any computer, almost as if he needs formatting / initialized as a raw player! Please help as I have more data anywhere, but on this disc... certainly there must be a way to read data from this drive?  Is there a system I can try to retrieve data?

  I'm on Dell T5500, BIOS = A09.  Most recent update of the BIOS and update Intel RST?

  Thank you!

  Hello

  Go back to your original information you posted, the hard disk had be GPT formatted and not MBR otherwise the hard drive wouldn't format on 2.72 TB.  How can he be a former post office at your first post about it is dated today?

  Removing a hard drive which is currently in use is never a good idea that he could make the hard drive completely unusable depending on what operation is made at the point where the hard drive is removed.

• Tecra S11 with BIOS 3.50 - USB mouse is not recognized at startup

  Hello

  I installed the latest version of the BIOS in my TECRA S11 - U10, and now my "HID" device does not-that is to say my dongled USB wireless mouse. I must now remove the dongle and re - insert before the TECRA sees the mouse.
  Boring, just about usable, but it's a PITA and I'm aware of always 'making/breaking' the USB connection.

  Must be something to do with the BIOS and see devices HID on "start"?
  Finally, I enabled Legacy USB in the BIOS device support, but still no joy. In addition, have tested the mouse on other laptops - works well at the start, so NOT the mouse.

  Suggestions, people? Thank you...

  Hello

  Disconnect your USB mouse and go to Device Manager.
  Remove all USB hubs and USB controllers in Device Manager list.
  Reboot the laptop.
  Wait until all the USB ports have recognised and installed again.
  Then connect the USB mouse and check how it works.

  You should also test different USB ports available on this laptop.

• Tecra Z50 - need to connect two external monitors

  I think to buy Tecra Z50, but one of the features that I need is the ability to connect two external monitors.

  Is it possible to have a monitor connected to the HDMI and a VGA (with computer laptop lid closed)?

  * Hi-speed III Port Replicator is not an option, because it is not available in my country (Croatia).

  Hello

  I don t think you will be able to connect two external monitors to this laptop using HDMI and RGB port at the same time because of different types of signals.

  The RGB/VGA port supports analog signal.

  The HDMI port provides the digital video output and when the external monitor is connected to the HDMI port the device is set to HDMI.

  > * Hi-speed III port replicator is not an option because it is not available in my country (Croatia).
  What of the Dynadock? Its an external device connected to the s for computer laptop USB port.
  It supports own graphic unit and you can connect to another external monitor such Dynadock 2nd.

• Tecra A10 erratic mouse then freezes when serial port used for something else

  MT Tecra A10 was beautiful, but has developed a growing problem. It is running win7 ultimate. When you connect anything serial port wise it blocks indicating the Mouse / touchpad. USB mouse feezes completely, 98% frozen touchpad series same happenes when connecting via a usb emulator. Software on the laptop using series includes RS logix, perfect Omron CX1 Motion and NQ Designer, that said that they worked, can anyone guid help me pls.

  See you soon

  Martyn

  Hello

  Eventually, the software that controls the serial port or the device connected to the serial port is not fully compatible with Win 7.
  I think that this should be checked first.
  Maybe one of you should look for the Special Forum of the manufacturer of the software for more details

• The cursor moves erratically even when no mouse connected

  I've had the problem for over a year now, but I never received tour to report. From time to time, my cursor moves erratic around the screen, jumping from position every few seconds. I have a MBP, but often use it plugged on a screen and mouse etc with the lid closed. The problem persists if Setup like that, even when the external mouse is disconnected, or when simply use it as a laptop. I recently wiped the hard drive and reinstalled a clean copy of Mac OS x from zero (no backup), but the problem still persists.

  Any ideas?

  Looks like a hardware problem. How old is this MBP? Sometimes, when they get older, the battery may start to inflate and put pressure on the trackpad.