Tecra A7 fingerprint sensor support

Hello!

A skier of Tecra A7 have a fingerprint sensor and some not. How will I know if my A7 has a sensor? There is a quarter on the right side of the touchpad, but it has the same color as the case of notbook.

Hello

Where did you come from?
There are many models Tecra A7 but each model has been designed for a country or a region

You can visit the Toshiba home page and check the area of product-> notebooks-> Tecra

There you should find different units of Tecra A7 and the features supported.
But as far as I know, that Tecra A7 with number PTA71C should support the fingerprint reader.

By the way every mobile merchant who sells the Tecra A7 should provide or offers the right information on the details of the laptop

Tags: Toshiba

Similar Questions

  • Tecra A9 - fingerprint sensor does not work

    My Tecra A9 is less than 2 weeks old. The first day, the fingerprint sensor worked for a few hours. I registered three fingerprints. Since then when I drag my finger, 99% of the time it does not recognize or gives a message 'too short', although I followed the steps in the tutorial.

    There is a window where you can test the fingerprint sensor trying to drag prints. I asked the other two persons, of different ages and gender, to try it, but very rarely is he not successfully registered printing.
    My call to the support wasn't very helpful because I was threatened with charges of £35 if they find nothing wrong with the hardware. As a normal user, is not what it says on the Tin.

    Has anyone had the same problem and managed to resolve it. If so, how? If not, are there other people in the same situation?

    Hello Assa

    It's very strange. I didn't notice any problem on my Tecra. Please start Fingerprint Control Center and check the first option that it fingerprints. Under registration or change fingerprints, you will find option run interactive tutorial with exact explanation how to use the fingerprint sensor and your fingers correctly.

    To be honest, I do not think you have a hardware or software problem, but you must be careful how you drag your finger.

  • Tecra A8 fingerprint sensor does not work correctly

    I bought a laptop Tecra A8 which has as security option touchchip fingerprint coprocessor. He worked only 8 days and then have not read my fingerprint. By device mananger I uninstalled and reinstalled drivers auotomaticlly and was the message to the device mananger "working properly", but it does not work! I tried to fix its software in the control panel (programs), but it dose not work again.
    What is your suggestion?

    Hello

    I Don t know what software you have installed on your system and how is your configuration, but if you've already tried this steps you mentioned while it should the next step be a full recovery from your system with the recovery media that shipped with your machine.

    Don t forget to back up your data on external media. ;)

    By the way: If the recovery does not help, then you should contact a local servicepartner since you have warranty on your machine.

    If you really want to find one in your country then click here:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

    Welcome them

  • Tecra M5 - can't find the fingerprint sensor

    I have Tecra M5 with Windows 7 and I'm putting software fingerprints (protector suite QL) but old version is not compatible and new (taken from the Toshibas site) do not work. It just says: 'cannot find code 0xe7210005 of the fingerprint sensor device '. material is integrated.

    In the system's peripheral unknown ACPI\TOA620A, but it cannot be updated. Windows cannot find drivers and support package (driver_fingerprint_upek_TC00237700A) or (2.19C_package) has no driver that should be?

    Hi monono.

    Did you remove the old version of the fingerprint software before installing the new version? Remove from Control Panel > uninstall programs and remove the software before installing a new. Also use a registry cleaner like Ccleaner to clean the registry.

    Fingerprint work with OS preinstalled Toshiba?

  • Tecra A11 - 11L - fingerprint sensor does not work

    Hello
    I had a problem with my Tecra laptop. The fingerprint sensor does not work since yesterday. It also disappears from the hardware Manager. I tried to reinstall the utility, but the setup.exe will not run successfully. When I try to install the utility directly from the amd64 Directory installation will be successful, but the software is unable to connect to the fingerprint sensor. I also tried to install the original Windows image, but the sensor does not work.

    You have any ideas?

    Berst cordially
    Thunder1988

    You can try a BIOS update and set the default BIOS. If it still does not appear in Device Manager, the player is maybe defective or there is a connection problem. I'm guessing that the laptop is still under warranty, you may have to send the laptop to a Toshiba repair center.

  • Tecra A9 - software for the fingerprint sensor error

    My laptop is less than 3 weeks old and the fingerprint sensor has stopped working.
    I just get an error message: can not find the fingerprint sensor device, 0xe7210005 error code.
    can anyone help?

    Hello

    you don't have many options. But I can try to give you some tips:

    1. go into the Device Manager and search for the device of fingerprints, so if it s present, uninstall it and after a reboot it should reinstall itself.

    2. go on Toshiba drivers download site and download the latest drivers for this device. Install the driver and check if it work s

    3. If really nothing done then you should recover your machine with the media shipped (or HARD drive recovery)

    4. the last resort, if all fails, is to contact the nearest [ASP | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] in your country and ask them a hardware health check and repair.

    Good luck

    Greetings

  • Fingerprint sensor & drive hardware failure on Tecra M9

    Fingerprints reader / sensor does not work.

    Two device drivers reported a device code 10 does not no error in Device Manager.
    In the fingerprint software, this fingerprint sensor reportss has reported a hardware failure. Code of 1066.

    Reinstalled drivers and software - problem remains the same.
    Used system restore and registry restored - problem remains.

    Is this a warranty issue - laptop is less than 1 months old.

    [email protected]

    Hello

    There is a new software of fingerprint on the Toshiba European driver page uninstall the old, clean the operating system using the CCleaner, reboot the laptop and try to install the new application downloaded from the page.

    If this doesn't help and if the error persists then a recovery disk can be useful

    Good luck!

  • Tecra Z50 - Fingerprint already exists - how to remove all traces of fingers?

    My Tecra Z50 came with win 7 preinstalled.
    Before moving on to Win 8.1, I recorded 2 fingerprints.

    Then, once upgraded, not only 2 fingerprint to unlock windows does not, but I can't delete it.

    If I register other fingers, they work well, but I can't undo the 2 fingers recorded in win 7.
    The utility show me these 2 fingers are free to register, but when I do it says "Fingerprint already exists."

    How delete all THE recorded fingerprints and restart in a specific situation?

    Thank you very much

    Hello

    That would be helpful FAQ?

    [How to remove fingerprints from the fingerprint Scanner? | http://www.mytoshiba.com.au/support/items/faq/386]

    You can also try the [the fingerprint tool remove WBF TFPU | http://support.toshiba.com/support/viewContentDetail?contentId=4003856]
    This tool removes all the fingerprints in the fingerprint sensor if used.

    But beware: this software supports the AuthenTec Finger Print sensor only!

    Read also this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=67626

  • fingerprint sensor does not work for my iphone 16 6 GB pls help how to solve this problem?

    I have iPhone 6 grey 16 GB of model space suddenly my fingerprint sensor no longer works.

    When I try to set touch id always displays "failed please go back and try again".

    Please guide how to solve this problem.

    The warranty expired 3 months ago

    See this support document to help solving the problems of contact ID. If all else fails, then make an appointment at the Genius Bar from the Apple Store supplier or Service Center authorized Apple closest to have the material examined. They will explain your options.  Use touch on iPhone and iPad - Apple Support ID

  • Tecra R940 - fingerprint reader does not

    Hey,.

    A few days ago I was on my Tecra R940 and I got the messages re, a USB device unplugged series. I do not think it a lot at the time, but since then my fingerprint reader has stopped working.

    I can not connect via fingerprints, and when I run the utility of fingerprints, he says: "unable to connect to the probe.

    I ran the test of Toshiba PC diagnostic tool and it passed everything except the Modem test (I jumped, do not have a telephone line).

    Any ideas on how to diagnose this?

    Any help is greatly appreciated!

    > I can not connect via fingerprint, and when I run the utility of fingerprints, he says: "Failed to connect to the sensor.

    If the fingerprint sensor is available, it must be in the Device Manager.
    I would recommend that you go to Device Manager and check if the fingerprint sensor is listed there.

    Note: in some cases the option of fingerprints is available in BIOS and fingerprints can be enabled or disabled it. That's why I also recommend to check this option.

    Where the fingerprint sensor appears not in Device Manager and in BIOS of fingerprints is activated, I guess that hardware malfunctions and this can be solved by the replacement.

  • Driver file missing - Satellite L310-D4011 fingerprint sensor

    Dear all,

    I just bought laptop Toshiba L310 D4011.
    After you have installed Windows XP Pro, I've upgraded to SP1 and Sp2.
    Loading drivers (downloaded on the Site of Toshiba Support) for the fingerprint sensor, the message is - not found atswpdrv.sys.

    Anyone can throw some light on this?

    Thank you

    Ashok

    Hello!

    Have you downloaded the latest driver from Toshiba?
    And there are new versions of BIOS also available.
    http://www.PC.Toshiba-Asia.com

    So, if you install Windows XP, you must first install SP1 and then SP2.
    You can install SP2 because this service pack has already the SP1 updates.

    Good bye

  • HP Envy 15-k204na: update the driver fingerprint sensor fingerprint validity cannot be installed

    I have a HP Envy 15 - k204na laptop, recently updated since Windows 8.1 for Windows 10.

    Following the update Windows 10, tune tuning showed a number of updates and I've updated them except the last one on the list - validity Fingerprint Sensor Driver Update - it is impossible to install.

    I have tried to install the update, but it back with a messaged Installation failed us.

    I tried this several times, after having re-boots, and he still fails to install.

    How can it be fixed so that this update (see HP Support Assistant 4.7) installs propoerly.

    A solution to this is urgent.

    Thank you in anticipation of a resolution.

    @EckC_25

    Your computer:

    Laptop HP ENVY - 15-k204na (touch) (ENERGY STAR)

    Your validity sensor driver:

    File name: sp72143.exe

    Communicate details

    Exit the: August 5, 2015

    Version 4.5.289.0 Rev.A

    You can try:

    Remove the driver from Device Manager > restart > install new drivers

    ======================================================

    Reference:

    HP SimplePass upgrade instructions

    Read the first page: Dragon Document guidelines

    See the Section:

    • 3 reinstall the existing fingerprint driver
      • Install and Delete 3D option Driver

  • HP Envy laptop M5L32EA #ABU: update SP74365 fingerprint sensor

    Install updates yesterday using the wizard help HP, including SP74365 of validity fingerprint sensor driver, since when the sensor has stopped working completely. After starting the system, the sensor light is flashing, but when you try to use it to connect it will just die. It was working okay until then. The Windows Device Manager indicates the biometric device is not working properly. It seems not to be an obvious way to support the update.

    Hello

    You can uninstall the current version of his entry into programs and features?

    DP - K

  • HP elitebook 8760w fingerprint sensor

    I just got my new HP EliteBook 8760w and this is what seems to be a sensor of fingerprint on the right side in front of the keyboard.  It is a glossy black rectangular thing.

    My previous laptop was a fingerprint sensor, and I enjoyed using it to connect.

    It doesn't seem to be any software to record my fingerprints - it's a fingerprint sensor?  and if so, how do I use?

    Thank you

    Minnie

    You are the very welcome, Minnie.

    Yes, there is, and here is the link...

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5071180&prodNameId=5071182&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-107304-1

    There should be a menu of help on how to configure the fingerprint sensor to work.

    You can also find this user guide.

    http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c02950624/c02950624.PDF

    Paul

  • Question of TrueSuite of fingerprint - error: could not open impression fingerprint sensor

    Hello

    A few days ago my TrueSuite reinstalled himself and then asked to restart the computer, which I did. But things, when I turned on the computer laptop back to reboot, TrueSuite will have to reboot again. This happened a few times, so I reset the laptop to a system restore point, I had created a few days ago.

    This deleted all my fingerprints, which I don't mind, but when I go to re-register my fingerprints, it says: "error: could not open impression fingerprint sensor.»

    PLEASE HELP ME WITH THIS!

    Thank you.

    See European driver of Toshiba for the most recent software TrueSuite to fingerprints.
    Remove your old software of fingerprint of the computer and reinstall the new software downloaded from the site driver of Toshiba.

    Then set it up again, create fingerprints and take advantage of the laptop.

Maybe you are looking for