Tecra A7 - Intel PROSet / Wireless does not respond to the stop

Similar Questions

• Wireless does not appear in the Fn + F5 and dial-up connections to

  Hello

  I just installed a hard drive on my T60 and restored of WinXP from recovery DVDs, everything seems to be working very well, I have Windows SP3 upgrade more all software patches and updates ThinkVantage software to the latest version using the update 3 System. Today, when I try to use the WLAN I found a problem, there is no way to add a WLAN profile in logins, I can choose Intel PRO/Wireless 3945ABG when you create the new profile in AC, but after I clicked on next, I couldn't find any SSID wireless even if there is an asset. The drop-down list of the #3 (wireless mode) is also empty, the security property button is also grayed, so I cann't go further.

  I thought maybe it's because the without thread is disabled somehow, so I used Fn + F5, to my surprise it is not wireless in there! It has only Bluetooth. I have 2 wireless network connection in the network connections on Windows, it is listed as not connected, the hardware Manager shows also the NETWORK card wireless without any problem, so I think that WIndows does not recognize the wireless NETWORK card, but for some reason any Thinkvantage refuses to recognise it, any ideas?

  Thank you

  Jim

  I solved my problem of uninstalling and reinstalling the driver WLAN and AC (perhaps others drivers related, can't remember). The uninstall/install sequence is important, I think that you must uninstall AC first and finally install it.

• Thunderbird starts by does not respond after the update to version 38

  I've updated to version 38.0 yesterday and since then whenever I open Thunderbird, he refuses to open and top watch does not respond. I have to close it via the Task Manager. What's past and how to fix it?

  > I tried in safe mode and it opens and I see my mail but when I try again to open it in mode normal it is just the same thing.

  This clearly suggests that something you added to Thunderbird or the operating system is causing at least some of your problems. If the problem occurs with the OS in normal mode and Thunderbird in SafeMode - http://support.mozillamessaging.com/en-US/kb/safe-mode - then you should suspect a program that is loaded by the operating system, such as antivirus. But if it helps me to http://support.mozillamessaging.com/en-US/kb/safe-mode , then the problem is related to an add-on, or accerlation of material found in tools | options | Advanced | General

• Re: Wireless does not work on the Satellite L505-13N Windows7 Professional 64-bit

  Hello

  I just got a Satelite L505-13N and upgrade to Win 7 Professional. The Wireless does not work. It seems that the driver is not yet installed.
  FN + F8, that should give me the option to turn on/off Wireless does nothing and the wireless on the laptop light is lit (orange color).

  What should I do?

  Thank you

  George

  Wait a moment George.
  What do you mean with upgrade? Did you do your own installation of Win7?

• G6 2312ax Pavilion: Pavilion g6 2312ax keyboard does not respond after the death of hard drive

  My laptop received disc hard failure two months and he died since then. I intend to change the hard drive of the laptop as soon as the order arrives in a few days. But now the problem is that as if now the keyboard of my laptop does not respond. So I would like to know if this problem will be resolved after the replacement of hard disk or is related to the software / operating system of your laptop?

  Help, please...

  Sorry I couldn't answer yesterday.

  The update, is that when I tried to turn on the laptop as well by pressing the ESC. The laptop did not respond initially but then responded in the end, but after that, there is no answer.

  Now Mr. President, I would like to know your end on this issue?

  Thank you

• ccSvcHst.exe inhibits the CPU at 100% on XP Media Center 2002 (Service Pack 3). PC does not respond until the end of ccSvcHst.exe there domination of 30 to 90 minutes.

  ccSvcHst.exe consumes CPU: (XP Media Center 2002 w/Service Pack 3)

  • PC does not respond, until ccSvcHst.exe completes his domination of CPU from 30 to 90 minutes.
  • Completely consumes 100% CPU AMD Athlon 64 4000 + (4 GB RAM).
  • Has always been a problem with Microsoft Media Center o/s, which has worstened and occurs more frequently.
  • The PC makes it completely useless.
  • Unable to complete the process or decrease its priority.
  • If hardbooted, the ccSvcHst.exe process usually will continue during the restart.
  • Running Norton 360.
  • Please indicate if you need additional information?
  • Thank you in advance with the help of solution (s).  Your help is greatly appreciated!

  ccSvcHst.exe consumes CPU: (XP Media Center 2002 w/Service Pack 3)

  • PC does not respond, until ccSvcHst.exe completes his domination of CPU from 30 to 90 minutes.
  • Completely consumes 100% CPU AMD Athlon 64 4000 + (4 GB RAM).
  • Has always been a problem with Microsoft Media Center o/s, which has worstened and occurs more frequently.
  • The PC makes it completely useless.
  • Unable to complete the process or decrease its priority.
  • If hardbooted, the ccSvcHst.exe process usually will continue during the restart.
  • Running Norton 360.
  • Please indicate if you need additional information?
  • Thank you in advance with the help of solution (s).  Your help is greatly appreciated!

  The list file you most often is a process associated with Norton 360. However, malware is sometimes assumed the names of the legitimate files in order to deceive the end user. Norton is a Devourer of known system and as a result, I wouldn't be surprised to learn that he is a legitimate file in your case. However, I recommend you download, to update and scan with Malwarebytes and Superantispyware, just to be sure. If the scans do not detect the file and the problem persists I would contact Norton or remove Norton making sure to use the tool to uninstall do.

  Malwarebytes.org

  SUPERAntiSpyware.com | Remove malware | Remove spyware - AntiMalware, AntiSpyware, adware!

  Sometimes to decide what battles to fight the toughest battle of all... Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Left click of the mouse does not respond in the office and I could see 2 together (Picture) Office

  Everything works well today that the left click of the mouse is not responding on the desktop (icons does not meet the double click). Right click works ok, and left click works well on programs and in the taskbar.

  Weird things here, it's that I can see two desktop at the same time.

  I have attached a picture.

  Can someone help me?

  Thanks in advance.

  

  I got disabling the system restore, so I can't go back to a good version.

  Turn off the system restore makes things much more difficult. Your problem is probably due to an inappropriate registry setting. You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some careful typing. Ask a computer-savvy friend to help you if you lack experience in this field. You may reset your password to an earlier value.

  Check the date of the file C:\Windows\System32\config\regback\System. It precedes the date when you became aware of your problem? If so, follow these steps:

  1. keep tapping F8 during the first phase of startup.

  2. Select repair in the menu that looks like this.

  3 log in as administrator if you are prompted.

  4. Select repair when prompted.

  5. Select the command line in the menu that looks like this.

  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands exactly:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\MyRegBack\
  CD RegBack
  8 type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

• Superior 1/4 screen does not respond to the mouse - cannot disconnect sites when Logout button is in this area, IE. Facebook, banks, etc.. This does not happen with IE. I reinstalled Firefox without result.

  Menu bar, tabs, history, research, etc. work fine, but in this area, I am unable to access anything whatsoever. For example, on the Firefox help screen the area on the right side of the screen that shows my user id - Sign Out - Inbox - and other applications will not respond to the mouse. Therefore, I will be unable to sign using Firefox. This is true for every Web site I have access. Fortunately, at least one of the banks that I use has an additional journal on area at the base of the screen that can be used.

  Recently, the extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• Mac Mini blocked, does not respond to the keyboard

  So, we have a mac mini since 2006. Since 2007, he has 24 hours a day.

  Now it has crashed, and while restarting it seems to be stuck at the gray screen with the apple logo.

  The circle under it is moving, it seems that it is still starting.

  I tried all kinds of different key combi any reboots, but nothing seems to work. Even the light caps lock does not work on the keyboard.

  Have you tried to dismantle the mini and put back together. No luck.

  Can someone tell me what is happening? Would appreciate your help!

  Best guess would be a failing hard drive. You can try to boot from the original CD/DVD comes with your Mac or DVD for an improved version of OS X, run disk utility to repair the internal disk partition.

  Note: It is advisable to restart your Mac on a regular basis as opposed to she works 24 hours a day for 8 years.

  It also helps to provide as much information as possible on your Mac. There are 4 different models MacMini that can be described as of 2006, and you do not identify the version of your OS X.

• Tecra S3 - Intel PROSet/Wireless window does not respond after changing settings

  Given that I've updated the driver and the utility Intel PROSet version 9.0.4.17 driver and tool PROSet to version 10.5.0.1 for Intel BG2200 WLAN card to build-in the PROSet tool window freezes every time after that I changed a parameter (for example, by adding a new profile).

  Closing the window with ALT - F4 also does not work unless you kill the process in Task Manager.

  Is this a known problem or is there any group of fixes for the driver or the Intel PROSet tool available?

  Hello

  The ProSet utility is a clean product Intel and if there are updates you find on the Intel Web site.
  But in my opinion, there is only a corruption of installation.
  How do you install this app? Have you removed the old version first?

  I think that if you want to update the programs, you must always first remove the old version and then after reboot of the new laptop, you can begin the installation of the new version.

  You could use additional own program register as a CCleaner. It s a freeware application and it checks the registry for some corruptions.

• OfficeJet Pro 8000 wireless: OfficeJet Pro 8000 wireless does not respond after a certain time

  I use my wireless OfficeJet Pro 8000 for quite awhile now, but I have a problem that I can't solve:

  Initially, it works allright. But after a few hours, it seems to go to sleep. And it does not print jobs more. I have to put the printer 'off' and 'on '.  After that, it will print the work queue.

  I searched a timer as issues in the web interface of the printer, but can't find anything that points to a solution.

  The printer is connected wireless to my router, using a 'fixed' IP address

  Can someone help me, please?

  Thankx

  These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

  While the DHCP is convenient, devices like printers must always be assigned an IP (fixed) manually to avoid conflicts on your wireless network.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).
  2. Or check in the printer "Auto off" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check the properties of your printers.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. If necessary and you have assigned a static IP address, try using auxiliary for the preferred DNS Server 8.8.8.8 and 8.8.4.4 as DNS server.
  5. Wireless printers work only on the 2.4 Ghz band.
  6. Make sure the printer is on the latest firmware by checking with the HP support site.
  7. Check all devices wireless in your home for interference. Check microwave, babyphones, phones, wireless and wireless alarm systems are a big culprit. Any of these will knock at your printer wireless intermittently.
  8. Make sure that your printer and router are at least 6 feet, independently of the other.

  In the router: (refer to the manual of your router for more information)

  1. Use a fixed wireless channel as the 1, 6 or 11, never 'auto', try channel 1 first then the rest.
  2. Set the router to 20 Mhz only or 145Mbps router function.
  3. Always use WPA2-AES encryption (personal), but you can try the "mixed" mode
  4. Disable the WPS and never use it and disable the UPnP for the security of routers. No one can hijack your system now and help with wireless connectivity (if you want to know why, research on the web).
  5. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure the SSID is NOT identical, they must be different for all the bands, even for networks without comments.
  6. SSID broadcast should be enabled.
  7. Save all the settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.
  8. Marketing the printer and check that it reconnects to the router.

  Windows 7/8/8.1 is discovered the system on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
  2. Under home or work (current profile) / network discovery.
  3. Select "Turn on network discovery" and save the changes.

  Last resort effort - if your printer has an Ethernet connection, suggest you to get some adapters line and convert your Ethernet wiring for your printer.

• bridge to aid does not respond after the effect presets

  Bridge stops responding when you try to use or to get an overview after effect presets. The application never gives me the error "not responded" but but does not not in stocks. It could be because the computer is old?

  MAC

  10.11.4

  3.2 ghz intel core i3

  12 GB of ram

  ATI radeon HD 5670

  Measures taken

  Destroyed bridge preferences.

  Uninstalled the application > Reinstalled

  Thoughts?

  This has been resolved with the new Update 2015 bridge

  

• Linksys Router WRT160N - Wireless does not connect to the cable modem

  I installed the Linksys WRT160n router to replace an existing G router. When installed the new wireless router works, but the router does not receive a connection (IP address - look under status) of the cable modem (so no internet). When I reconnect the old router and then connect the new router, I get any internet connection through two routers (so the old dishes router the IP address that accepts the new router).

  I have configured the router N new for

  "Automatic configuration - DHCP", no need for connection, IP address dynamic, etc (as required by ISP - Timewarner)

  I tried to renewal and release IP address by the router N when it is connected directly to the main switch (the switch to connect to the cable modem). In so doing, shouldn't that assign a new IP address to the router?

  I am allowed 3 IPs from the cable company (because of the switch) and I use all three with three different internet IP cameras to each address for home security system.

  Any suggestions on why the router is not connecting to the internet? Do I need to reboot physically everything on the network, including the cable modem?

  If I understand your post, you said that your ISP gives you 3 Internet IP addresses and you have 3 cameras that use one of these Internet IP addresses.  If this is correct, then that leaves no IP Internet address for your WRT160N use - so that would explain why your WRT160N cannot get an Internet connection.

  If I misread your post, and you have an Internet IP address available for the WRT160N, you might have a problem with your modem and two WRT160N tries to use the same 192.168.1.x subnet.  To check this, follow these steps:

  (1) Please indicate addresses that use your cameras (IE before you take the test below).  If the addresses do not begin with 192.168, then erase the last half of each address.

  (2) Please indicate your ISP

  (3) Please indicate the make and exact model of your modem (not the WRT160N) number.

  (4) Please do the following test:

  Put your entire network.  Disconnect the switch (including cameras) to the modem.  Using an ethernet cable, connect your modem directly to your computer.  (Do not use the WRT160N for this test).  Turn on the modem and the computer.  Make sure you have an active Internet connection, then go ahead with what follows: (even if your Internet connection does not work, include this and move forward.)

  Go to 'Start' > all programs > Accessories > command prompt.
  A black DOS window will appear. Type "ipconfig/all" (with no quotes), and press the Enter key.   Copy all results in your next post.  To make the copy, highlight the results, and then use the keys copy (Ctrl-c) and paste (Ctrl-v) keys.  If your "IP address" does not begin with 192.168, then for security reasons, delete the latter half of your IP address.

• Key combination does not respond before the start

  Hello. I have a macbook pro 13 "2015 retina.

  The problem I have is the same as the title, but it's not regular "choose the appropriate settings startup disk' because I tried already several times.

  Mind you, none of these problems remain once Mac OS startup has finished, it is just the period prior to initialization.

  Here is the list of problems.

  1. There is a very long period of black screen (backlight on) between the startup sound and the apple logo appears on the screen.

  2. start after key combinations take a long time to register. For example, 'boot disk selection window' takes more than 2 minutes of waiting. I have to wait while pressing the option key. It also applies to enter recovery, reset pram, entering the diagnosis, enter safe mode, etc..

  3. once I finally get a function running, there is a delay of keyboard/trackpad. Interactions appear unusably slow on Boot Disk selector and Internet Recovery(wifi selection). Trackpad responds a minute after I hit, it is the keyboard.

  4. There is no wifi signal on Internet recovery for about three minutes (my hotspot is 5 cm behind my mac).

  To sum up, it feels like the processor is clocked at 5 Mhz or something.

  Here is a list of what I tried.

  1 reset the smc, pram

  2 reinstalling Mac OS

  3 internal SSD flash disk formatting and installing Mac OS

  4. remove the boot camp

  5. remove the magsafe

  6 safe mode (no matter, because I do not think it is related to Mac OS anyway)

  I have no external devices or readers, all that is present is the magsafe.

  I always have Apple Care has left, so feel free to tell me if you think it's a hardware problem. Thank you for reading, and I appreciate your help.

  Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.