Tecra A7 with W7-64 b uses only 3 GB to 4 GB of RAM available

Similar Questions

• Tecra R850 with Windows WXP - cannot use the FN key

  Hello

  On a Tecra R850, I can't use the FN key. I installed all the drivers for toshiba and they does'nt work

  Help

  Thank you

  Hello

  All this is a bit complicated with WXP and it is important to install everything in the right installation order. After some base such as chipset, display and sound drivers you need to install the common modules at the beginning and continue with Toshiba-specific tools and utilities like controls, screen, energy saving and so on.

  You can use a combination of FN keys or none of them does not work?

• Adobe cs6 could not use the brush because there is not enough RAM

  Hello
  
  pls how can I solve problem with:
  Photoshop cs6: cannot use the brush because there is not enough RAM

  I would like to corect a picture with brush manually from the panorama (panorama size: 13300 x 7000 pix)...

  

  Free RAM is 5 GB

  What did you do for troubleshooting so far?

  t http://blogs.Adobe.com/Crawlspace/2012/07/Photoshop-basic-troubleshooting-steps-to-fix-MOS - issues.html

  What did you do to improve the performance of Photoshop and what is the setting of zero-drive?

  http://helpx.Adobe.com/Photoshop/KB/optimize-performance-Photoshop-CS4-CS5.html

• Cannot change the brightness on Toshiba Tecra S11 with Win7 using the FN keys

  I can't change the brightness on Toshiba Tecra S11 with Win7 using the FN keys (disable audio and other work fine) when logged in as a normal user.
  Shortcuts keyboard console appears and pressing F6 or F7, the brightness is always set to level 1 (no matter how luminous monitor is really) and cannot be changed.
  I can change it via power or Administrator Options.

  Hello

  Maybe you didn't install VAP (value added package) for all user accounts.
  Please reinstall VAP by using your user account.

  You can also check if the user account is the Admin right supported.
  You can run simple applications (exe) as an administrator.
  For this, he must right click on exe file (value package) and should choose + Run as administrator. +

  Check it!

• ordered a pavilion with graphics card upgrade, upgrade used only 16-bit location

  ordered a pavilion with graphics card upgrade, upgrade used only 16-bit location. I want to connect a second monitor, can I use the parent connections card currently have coverage through them that say "do not remove"?

  Hello

  If you use an adapter, then you have the choice on the end to use the adapter based on the adapter that you use. Buy cable HDMI to DVI and save frustration adapter problems and possible.

• printing with printer deskjet 2050 using the black cartridge only

  printing with printer deskjet 2050 using the black cartridge only

  all solutions? PLIs answer me. thanx

  Hi d33com,

  Follow the steps below to set the black ink only.

  1. open the printing preferences (step 1)

  2. click on the Advanced button (step 2)

  3. click on the drop down arrow next to the print in grayscale to change black ink only.

  

• Mr President, how can I enter two rows at the same time with different default values that only the first line to use see?

  Mr President.

  My worm jdev is 12.2.1

  How to enter two rows at the same time with different default values that only the first line to use see?

  Suppose I have a table with four fields as below

  "DEBIT" VARCHAR2(7) , 
    "DRNAME" VARCHAR2(50),
    "CREDIT" VARCHAR2(7) , 
    "CRNAME" VARCHAR2(50),
  

  Now I want that when I click on a button (create an insert) to create the first line with the default values below

  

  So if I click on the button and then validate the second row with different values is also inserted on commit.

  The value of the second row are like the picture below

  

  But the second row should be invisible. It could be achieved by adding vc in the vo.

  The difficult part in my question is therefore, to add the second row with the new default values.

  Because I already added default values in the first row.

  Now how to add second time default values.

  Concerning

  Mr President

  I change the code given by expensive Sameh Nassar and get my results.

  Thanks once again dear Sameh Nassar .

  My code to get my goal is

  First line of code is

      protected void doDML(int operation, TransactionEvent e) {    
  
          if(operation != DML_DELETE)
               {
                   setAmount(getPurqty().multiply(getUnitpurprice()));
               } 
  
          if (operation == DML_INSERT )
                     {
                             System.out.println("I am in Insert with vid= " + getVid());
                         insertSecondRowInDatabase(getVid(),getLineitem(),"6010010","SALES TAX PAYABLE",
                          (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                         }
  
          if(operation == DML_UPDATE)
                            {                                                    
  
                               System.out.println("I am in Update with vid= " + getVid());
                           updateSecondRowInDatabase(getVid(),
                               (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                            }                      
  
          super.doDML(operation, e);
      }
      private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object value4, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "Insert into vdet (VID,LINEITEM,DEBIT,DRNAME,AMOUNT) values " +
               "('" + value1 + "','" + value2 + "','" + value3 + "','" + value4 + "','" + value5 + "')";  
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }
                }  
  
                private void updateSecondRowInDatabase(Object value1, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "update vdet set  AMOUNT='"+ value5+"' where VID='" + value1 + "'";                     
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);  
  
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }                  
  
                }
  

  Second line code is inside a bean method

      public void addNewPurchaseVoucher(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("VoucherView1Iterator");
                 RowSetIterator rsi = dciter.getRowSetIterator();
                 Row lastRow = rsi.last();
                 int lastRowIndex = rsi.getRangeIndexOf(lastRow);
                 Row newRow = rsi.createRow();
                 newRow.setNewRowState(Row.STATUS_NEW);
                 rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
                 rsi.setCurrentRow(newRow);
  
                 BindingContainer bindings1 = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter1 = (DCIteratorBinding) bindings1.get("VdetView1Iterator");
                 RowSetIterator rsi1 = dciter1.getRowSetIterator();
                 Row lastRow1 = rsi1.last();
                 int lastRowIndex1 = rsi1.getRangeIndexOf(lastRow1);
                 Row newRow1 = rsi1.createRow();
                 newRow1.setNewRowState(Row.STATUS_NEW);
                 rsi1.insertRowAtRangeIndex(lastRowIndex1 +1, newRow1);
                 rsi1.setCurrentRow(newRow1);
      }
  

  And final saveUpdate method is

      public void saveUpdateButton(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindingsBC = BindingContext.getCurrent().getCurrentBindingsEntry();      
  
                 OperationBinding commit = bindingsBC.getOperationBinding("Commit");
                 commit.execute(); 
  
          OperationBinding operationBinding = BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Commit");
          operationBinding.execute();
          DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("VdetView1Iterator");// write iterator name from pageDef.
          iter.getViewObject().executeQuery();  
  
      }
  

  Thanks for all the cooperation to obtain the desired results.

  Concerning

• just bought SCAN SNAP supplied with disc of Acrobat, but only for PC, I use a MAC, the serial number of the disk, how to use and get for MAC

  just bought SCAN SNAP supplied with disc of Acrobat, but only for PC, I use a MAC, the serial number of the disk, how to use and get for MAC

  Standard Acrobat's window only; Acrobat pro for mac

• Can NOT CONNECT to PC RUNNING WINDOWS 8 - only "your PC is offline.". Please sign in with the last password used on this computer. »

  I'm so angry. I did everything and I can't connect my new pc Windows 8! I live in New Jersey and set up my network connection there, but I'm going to school in California (where I don't had not set up a connection without wire/local). I have configured my pc via a microsoft account and now it does not allow me to log in because I am not connected to the internet and can not connect to the internet. I can not update/use command prompt to connect to the wifi/etc. because all actions require my password. I even tried to use an Ethernet cable. Nothing works! He always says "your PC is offline.". Please sign in with the last password used on this computer. "I HAVE NOT CHANGED MY PASSWORD! and my account has not been hacked. This problem is simply my inability to connect to the internet. It's BS. Microsoft, you better come up with a fix for this young! If anyone has found a solution to this problem, please answer! I have very important files/software that I can't simply delete. This bug is much too big for Microsoft to miss and should be fixed immediately. How am I supposed to use this PC for school?

  But... In order to implement a local account, you must first connect to the Microsoft account that brings back us to the same error.  I had this problem as well and he needs to be addressed.  Whenever you walk away a network before installation on your PC/laptop, you will have this problem.  Try this... turn off PC/laptop, then go to another computer and sign in to Microsoft Web site account.  Connect with an Ethernet cable and turn on your PC/laptop with the connection problem and try to connect again.  It should work.

• World of Warcraft on Tecra M5 with Nvidia video problem

  Hello

  I own a laptop very well supported - Toshiba Tecra M5 with the following specifications

  Processor: Intel Centrino Duo - T2600 @ 2.16 GHz and 2.16 GHz
  RAM: 4 GB
  Video: Nvidia Quadro NVS 110M
  OS: Windows Vista Ultimate 32-bit (on the highest performance with all the eye candy settings disabled)

  The phone plays very well, but when I try to play world of Warcraft I encounter problems in the screenshots below

  http://www.exeedstudios.com/temporary/WoWScrnShot_051809_075336.jpg
  http://www.exeedstudios.com/temporary/WoWScrnShot_051809_075634.jpg

  I tried playing with the drivers on the Toshiba site (dating back to 2007) and I also tried the latest version of the driver directly from nVidia but no change in performance

  Running the game in opengl mode makes things worse.
  Sometimes, glitches video will change the above to the following

  http://www.exeedstudios.com/temporary/WoWScrnShot_051809_090648.jpg

  In the world of Warcraft Support Forum I was told to contact the manufacturer of the video card may be defective.

  Thanks in advance for your help.

  Hello!

  It seems that your graphics card is broken...
  You have this problem on other games also or only with World of Warcraft?

  But it could also be an overheating problem. Have you tried to clean the laptop using a jet of compressed air? This could blow out the dust from the cooling fans.

  In the worst cases, you should contact an ASP. Technicians can check your laptop and share the graphics card if it of necessary.

  Good bye

• Cursor randomly freezes and jumps to life on Tecra 8200 with Win XP

  Tecra 8200 with Win XP Professional

  The cursor randomly freezes and jumps to life after a few seconds, very rarely, I have to re - start.
  This happens as well with the mouse of keyboard or mouse remotely.

  Hope someone can help because it's driving crazy me.

  See you soon
  Matt

  I agree with Akuma. Disable the internal mouse and external use only. I have old Tecra M1 with the same keyboard and in my case the problem was faulty Acupoint placed on the keyboard.

  With the new keyboard, everything was OK again.
  I recommend you to disable the mouse of the computer laptop and external use only.

• Tecra A10 with Intel WiFi 5100 running Vista 32 bit fails to connect WiFi

  Hello

  a whole new Tecra A10 with buildin Intel 5100 WiFi fails to connect to the Wlan router, using the pre-installled Vista Business 32-bit. Vista has always said: wrong password.

  Yes, Wifi hardware is enabled, of course. And Tecra WiFi OK MAC is stored in the config of the router. Also the WiFi settings were correct (wpa2-psk aes), corresponding to the Wlan router. Password WPA2 is 13 characters. Connect all the other machines with a Wlan successfully turns a working Wlan configuration and use of the correct password.

  I installed the latest driver on the Toshiba site - without success. I also installed the version of the driver from the Intel site will, too--without success. Doesn't matter what tool I used to connect, Vista itself, or the specific tool of Toshiba (Radar), choice to get an encrypted Wlan connection.

  WPA2 and WPA or WEP can be used. I can't get a Wlan connection when encryption is totally * disabled *! Currently, I use a * clear * Wlan to use this Tecra A10 in the network. Real gross and no solution for more than a few days.

  All other devices in the same network can connect the router Wlan with WPA2-PSK and WEP, no problem. Only the A10 / WiFi 5100 fails.

  Searching the Web I found really many reports all issue of WiFi with a WiFi 5100 devices, so it seems to be a generic material or / and driver issue.

  How can I correct this Wifi 5100 connect problem and use encryption WPA2-psk on Tecra A10 and WiFi 5100 with Vista? If this is not possible, I have to return this laptop and get another model with a working Wifi / Wlan Hardware.

  Thank you.
  -Thomas

  Hello Thomas

  Have you tried to connect your laptop to another router by friends or elsewhere?
  It is really strange that you can use any of the WIFI ciphers available.
  Have you tried to reboot your router?

  I have Satellite A300-1LI with the same card, WLAN, preinstalled with Toshiba recovery WXP image and I use it sometimes linked to the WLAN with WEP encryption.
  Have you tried to contact Toshiba or your local dealer for advice?

• Tecra A10 with replicator - no output to the DVI port but analog works very well

  Hi all. It's driving me crazy. Brand new Tecra A10 with a nine port replicator and a new external LCD. When I plug them all in all and connect to the screen using the blue/analog/d-sub cable, the image on the screen of the laptop automatically turns on the external screen when the A10 is docked. But when the external display is connected with the white/digital/DVI cable, the Tecra and/or the Replicator is auto-switch the output to the external screen.

  In addition, when you press Fn + F5 to switch the LCD only to LCD + CRT or CRT output only, the Tecra is so "smart" as to "realize" there is no screen, and it switches the output to only the Tecra.

  Now, we would put in place with the blue/analog/d-sub cable, but the picture is wavey and not satisfactory at all.

  Just so we're clear - when the display is plugged into another computer, there is a beautiful clear picture on/through the white/digital/DVI cable, so I don't think it's screen.

  Can anyone help with this please? Is the Replicator defective? Or am I missing something?

  Thank you very much

  As the portable Akuma (graphics card) does not have a DVI output.

  If you use the VGA cable, but image quality should not be worse as with the DVI cable.
  Choose the display resolution higher than the monitor supports and 60 Hz.

• Any possibility using only the built-in GPU?

  Mac OS X 10.11.6

  MacBook Pro(Retina,15 ",2015 mid)

  With graphics cards AMD one dedicated

  I wonder if it is possible to use only the GPU integrated while playing games. Cause I discovered that some games are no need to use the AMD GPU, but it is automatically switched to the dedicated GPU and drains the battery.

  Hope there is a solution for this problem. Thank you!

  It is somehow a conditional scenario suggested in this article

  on how to make some graphics settings may remain in service, here:

  • Set performance on MacBook Pro - Apple Support chart

  • MacBook Pro: how determine what GPU is in use - Apple Support

  {These links seem to show older versions of material your model}.

  Don't know if there is a way hidden within the system to change the default to

  stay on the one you want to be the first choice; Maybe in the command 'terminal '?

  In any case...

  Good luck in this case!

• Use only a part of a track when adding music to a slideshow

  Is it possible, and if so, what are the steps to add only a part of music followed by a slide show? With the help of photographs. 1,5.

  Thank you!

  Hello mjfriedman,

  Please use the Apple Support communities to post your question. Photo slideshows are a great way to show these great pictures of your collection. To use only a part of the track in your project, you will need to use another application to cut and edit the track first, before add you it to the slide show. GarageBand is an excellent application which can be used to change the part of the track that you want to use with your slide show. Please see the links below for more help.

  GarageBand help

  GarageBand for Mac: divide the regions in the field of securities

  Share the songs on iTunes

  Photos for OS x: creating and working with slideshows

  These links should help you with the sharing and use of this track in your project. The end result is going to be great!

  Have a great day.