Tecra A8 don't stop

Similar Questions

• Tecra S11 - 11 H - stop with the fan turns

  Tecra S11 - 11 H stops - seems ok, but when the screen is off, after 3 seconds, CPU-fan begins to operate.
  Pressing the power button / stop a few seconds turns off the machine and shut the fan.

  Support put me to upgrade to the latest version of the prints digital-device driver, but I found the software, no drivers.

  They also told me to upgrade the bios to the latest version.

  Problem is that this update of the bios will not start. He complains about power cord power supply not connected or battery power is low.
  The two isn't true - power cord is plugged in and the battery is fully charged.

  What could I do?

  TIA

  LGKF

  Hi lgkf,.

  Yes, I think the support from Toshiba is just because I found this article on the Toshiba page:
  http://APS2.toshiba-tro.de/KB0/TSB0C032L0000R01.htm

  As you can see, update the fingerprint software can help you get rid of this problem, then you must update the software of fingerprint. The pilot is a part of the software, then download the package for fingerprints on the Web from Toshiba site.

  Uninstall the older version, reboot and install the downloaded version.

  Check this box!

• {Don't Stop c0000139 no is encuentra el punto entrada} No. encunetra el punto entrada del procedure wcsncpy_s in the biblioteca vinvulos dinamicos ntdll.dll

  The machine lights well entered the loading windows XP toda parece pantalla a good pero al final appears the pantalla azul y dice lo siguiente:

  {Don't Stop c0000139 no is encuentra el punto entrada} No. encunetra el punto entrada del procedure wcsncpy_s in the biblioteca vinvulos dinamicos ntdll.dll

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• my system does not start upwards - don't stop progression blue bar that goes round and round. I can boot into safe mode and safe mode with networking mode.

  my system does not start upwards - don't stop progression blue bar that goes round and round.  I can boot into safe mode and safe mode with networking mode.

  Hello

  As you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

  http://support.Microsoft.com/kb/310353

  If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My laptop don't stop her self with a normal procedure?

  My laptop don't stop it self with a normal procedure, it happens that when I start - stop, you will see computer displays the stop message but never stops so that I force him.  What could be the problem?

  Hello

  1. you made any hardware or software comes to the computer before the show?

  2. do you get an error message/code?

  3. What is the brand and model of the computer?

  There are several reasons like drivers, conflicts with other programs, malicious software and memory which can cause this problem.

  I suggest for the link and follow the steps in the article to resolve the problem.

  You can't do a computer that runs Windows 7 stops or sleep

  http://support.Microsoft.com/kb/977307

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• How to challenge Windows 8.1 don't stop no problem / laptop...

  How to challenge Windows 8.1 don't stop no problem / laptop...?

  Be more specific.

  What exactly do you do when it does not turn off?

• My creative cloud don't stop loading

  I have tried to re - install a billion times and creative cloud do not work! I use Windows and the creative cloud don't stop loading.

  http://prntscr.com/a2ftgs

  Adobe Creative Cloud desktop application does not open or shows a spinning wheel of progress

• Tecra A8 - Touchpad has stopped working

  Hi all!

  I have a Tecra A8 (model: PTA83E) who has an ALPS touchpad. The touchpad has stopped working even if it is visible and fully operational in 'Device Manager' and also the 'Control Panel '. Apparently there is nothing wrong with it but the touchpad does not meet the clicks or touchs, it seems as if it has been disabled, but said, in Device Manager, the information is 'this device is functioning.

  I updated the OS to Windows 7 Enterprise and I would like to activate the touchpad if not I should always use a usb mouse. I searched the touchpad drivers but it seems they are Don t.

  This is the information that I can view in "Device Manager", about the pilot:
  -Controller version: 7.0.302.3
  -Date: 26/09/2006

  Thanks to you all.

  Hello

  You have activated the touchad by pressing FN + F9?

• Tecra A7 fan never stops

  Hello!
  I have a Tecra A7-108 and still the fan blows air. He don't never stops, even if the laptop is idle and with the utility of standby power configured for the lowest consumption. Because I had a problem with my laptop, I took to the guarantee and asked to look to see if the fan has problems. They said that it was defective, so they changed it. Even with a new fan, he refuzes to stop blowing air (stops only when I turn off the laptop :)). I think it may be a software or a bios problem, even though I've recently updated the bios to version 2.0. Could someone help me?

  Hello Vlad

  What to say! I know very well that stronger cooling fan is very annoying, especially if the device works under full CPU speed (depending on application). I have a Qosmio G20 and the same situation is in my case. The fact is that cell phones have a lot more power and performance does not compare to older models.

  This cooling fan noise is unfortunately present on most laptops that you can find on the market. What's important is what is the priority for the notebook manufacturers. I think that Toshiba's strategy is to protect the material. I've read many reports and tests with the different laptop models. Believe me, in the end it is better to buy some manufacturers known as Toshiba's cell phone.

  My Qosmio is also noisier than my old Satellite P20 but cooling fan don t race at full speed all the time. How is it with your Tecra? Is - this permanent cooling fan amusements at full speed?

• Tecra R950 - touchpad suddenly stopped working

  Suddenly, my Tecra R950-F0036 touch pad not working (Serial No.4D027959H purchased in South Africa).

  I tried all the usual options like update the driver.
  The driver seems to be there, but FN F9 does nothing to turn on the pad.

  Any ideas on how re - activate the touchpad?

  I don't know what OS you use, but check it please state of the material. Check please the Device Manager and check touchpad is listed there and active properly.

• All new Tecra A10 won't stop beeping... 3 beeps HI-LO-HI

  Hello there are experts...

  I just got a new work for laptop Toshiba Tecra A-10, and it won't stop beeping.

  Everything works fine, but every 2 minutes, or until you get 3 beeps, low high high. I can mute the PC so I can't hear it... But what the hell is wrong?

  Beeps start as soon as I get to the login screen after you start the system. The start process seems fine, I get the beep POST so I guess it's all good.

  The battery is full, and the beeps continue with the power cable in or out and any battery capacity. I restarted many times and still do not know the computer on top of his head and he's away until Monday. I just want to go to the bottom of this myself, I'm sure it's something simple. The laptop is brand new also probably isn't a BIOS warning (I'm no expert - it may be).

  I wandered through forum after forum and no one seems to have the same problem, then it might be something like one of these Toshiba applications was trying to tell me something?

  Please help, anyone out there with all the answers?

  Thanks guys,.
  Steve K

  In addition, there are a few programs installed since the laptop is... including the ABECAS and a few other software packages business including the TREND. Could this be something to do with those?

• Tecra S5 - fingerprint logon stopped working when I chanaged password

  I have a laptop Toshiba Tecra S5 and I use logon of fingerprints from the beginning.

  It stopped working when I have chanaged my password.
  Fingerprints are associated with the old password.

  I looked everywhere to find where to change it without success.

  Can someone point me in a right direction?

  Thanx

  Hello

  I think you should remove the old prints and need to configure this new.
  As far as I know, you can use the new password to connect.
  Then access the setting of Trusuite software, remove old prints and reconfigure using new digital prints.

  Theoretically, this should work.

• Tecra S10 - Does battery stops if it is full load?

  What is the Toshiba Tecra S10 stops charging the battery when it is charged?

  I mean, when the battery is charged, I have to unplug the power cord?

  Hello

  Notebooks stops charging the battery after it has been fully charged and you n t need to unplug the power adapter.
  If a battery is fully charged should turn the blue LED of the battery and the battery could be disconnected from the power supply.
  Only when you are not using your battery for weeks (a lot) and the battery charge decreases by a few percent of the self-discharge it will be recharged again at 100%.

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=161456

  It s a nice and interesting discussion on this theme.

  Cheers mate

• Tecra 9100 don't start - power suplly LED flashes

  Hi all.

  I have a problem with a laptop Tecra 9100. When I push the button start the suplly power LED flashes orange for eight times to make a quick stop in flash 2 and flash 8. Can someone explain to me this error code is this?

  Thank you for all your answers

  Hello

  If electronic power supply detects that some portable problem send a blink code. This code allows you to identify the problem. I can't tell you much these codes, but what I know for sure, is that you need professional help.

  Please contact the service allowed in your country and explain the problem that you have.

• Tecra 8100: Don't know if the Network Port Replicator II is working properly

  I had a PA3017E-1PRP, i.e. a Network Port Replicator II, for my Tecra 8100. The fact is: I don't know if it works. I plug the computer in and no new material appears. At least the 3Com NETWORK adapter should be recognized, but no sign of life is presented at all.

  In addition, the USB ports does not work, but at least, the leds of the watch of the computer there is come from there because they show that battery is charging and the power comes from the DC.

  So, how can I check that everything works correctly? The computer is Windows XP SP2 installed, and I installed all the drivers and the support of the utilities (common modules, mobile and other extensions) util Toshiba USA and Toshiba Configfree of Toshiba Asia...

  Hi Toka

  I really put t know why you install software mix on your device. In my opinion, you should install European tools and utilities if you live in Europe. But if everything works it is also OK. I just want to make this comment because I don't know if all tools can consort with each other.

  As much I know this unit only is not supported for Windows XP Home in Europe. If the US page has mobile extensions for Windows XP Home edition, I assume that it has been tested.

  You can use a ports from there or all of them are dead?